Generated by All in One SEO v5.0.0.1, this is an llms.txt file, used by LLMs to index the site. # Nora Lighting Illuminating the future® ## Sitemaps - [XML Sitemap](https://noralighting.com/sitemap.xml): Contains all public & indexable URLs for this website. ## Posts - [What is the difference between Non-IC and Type IC lighting fixtures? ](https://noralighting.com/what-is-the-difference-between-non-ic-and-type-ic-lighting-fixtures/) - Non-IC (Non–Insulation Contact) requires a minimum clearance from insulation, typically 3 inches, and must maintain spacing from adjacent building materials per the fixture’s listing. Type IC (Insulation Contact) is rated for direct contact with standard thermal insulation under normal operating conditions. Not compatible for direct contact with spray foam insulation, maintain 3 inch clearance from spray foam to luminaire. Standard insulation includes fiberglass, cellulose, and mineral wool, typically installed as batts, rolls, or blown-in materials. Spray foam insulation - [What lighting fixtures are allowed to be installed in a plenum space?](https://noralighting.com/what-lighting-fixtures-are-allowed-to-be-installed-in-a-plenum-space/) - According to NEC Article 300.22(C), electrical equipment installed in air-handling (plenum) spaces must meet specific construction and material requirements to minimize smoke and heat generation in the event of a fire. Fixtures with metal enclosures are generally permitted for installation in plenum spaces. Fixtures with non-metallic enclosures must be listed for use in air-handling spaces - [What dimmer works with my Nora lighting fixture?](https://noralighting.com/what-dimmer-works-with-my-nora-lighting-fixture/) - Check our tested dimmers on Nora’s website under Resources → Dimmer Compatibility: https://noralighting.com/resources/compatibility/. If your dimmer is not listed, refer to the product specification sheet and identify the dimming type—ELV, TRIAC (Forward Phase), or 0–10V—then select a dimmer that supports the same dimming method. Due to the large variety of dimmer models available on the - [Why can’t my TRIAC or ELV dimmer dim all the way down to 1%?](https://noralighting.com/why-cant-my-triac-or-elv-dimmer-dim-all-the-way-down-to-1/) - Most standard TRIAC (forward-phase) and ELV (reverse-phase) dimmers cannot reliably reach 1% dimming with LED fixtures. In our testing, the typical minimum dimming range is 5–10%, depending on the dimmer, LED and driver combination. This limitation occurs because TRIAC and ELV dimmers require a minimum conduction angle or current to operate properly, which restricts how - [Does Nora have ADA compliant light fixtures?](https://noralighting.com/does-nora-have-ada-compliant-light-fixtures/) - Yes, our NWLIN, NLUD, and NYUD-3 wall-mounted fixtures are ADA compliant when installed correctly. Many of our pendant-mounted fixtures can also meet ADA requirements if the bottom of the fixture is at least 80 inches above the floor. ADA Requirements for Light Fixtures: Wall-mounted fixtures must not protrude more than 4 inches into walkways when - [What is Comfort Dim?](https://noralighting.com/what-is-comfort-dim/) - Comfort Dim is a warm, rich light dimming that creates an intimate atmosphere. An innovation in energy-efficient dimming, Comfort Dim, presented by Nora, warms the light as power is reduced. Comfort Dim color tones the temperature from bright to a warm, romantic incandescent feel. The warm, dim Comfort Dim is the perfect solution for restaurants, - [Apollo FAQ](https://noralighting.com/faq-apollo/) - We have made a dedicated Frequently Asked Questions page for the Apollo Series Click here to view the FAQ page - [What are Closet Ratings?](https://noralighting.com/what-are-closet-ratings/) - Lighting Up Your Closet: Understanding Closet Ratings for LED Luminaires The lighting in your closet may not be the first thing that comes to mind when designing your home, but it plays a significant role in making your daily routine more efficient and enjoyable. When it comes to selective LED luminaires for your closet, understanding - [What is the difference between Wall Washing, Wall Grazing, and Wall Scalloping?](https://noralighting.com/what-is-the-difference-between-wall-washing-wall-grazing-and-wall-scalloping/) - Wall washing, grazing, and scalloping are three distinct lighting techniques used to enhance the visual appearance of architectural features and create a specific atmosphere. Wall washing involves illuminating a wall uniformly from top to bottom, casting even light that emphasizes the entire wall surface, minimizing shadows, and creating a consistent, clean appearance. Wall grazing, on - [What are Wet, Damp, Indoor, and Outdoor Ratings?](https://noralighting.com/what-are-wet-damp-indoor-and-outdoor-ratings/) - Wet and damp location ratings for LED luminaires indicate their suitability for installation in environments where they may be exposed to moisture or humidity. A “damp location” rated luminaire can be used in areas with elevated humidity levels but not directly exposed to water, such as above a bathroom vanity. A “wet location” rating - [What is CCT?](https://noralighting.com/what-is-cct/) - Understanding CCT (Correlated Color Temperature) for LED Luminaires Lighting plays a crucial role in our daily lives, affecting not only our ability to see and function but also our overall comfort and well-being. The advancement of technology has ushered in the era of energy-efficient LED (Light Emitting Diode) luminaires, providing an array of options to - [What is CRI?](https://noralighting.com/what-is-cri/) - Shedding Light on CRI: The Key to Understanding LED Luminaires When it comes to lighting any space, LED technology has brought about a revolution in terms of efficiency, versatility, and durability. However, not all LEDs are created equal, and understanding the Color Rendering Index (CRI) is essential to ensure that you achieve the right quality - [What are Airtight Ratings?](https://noralighting.com/what-are-airtight-ratings/) - Sealing the Deal: Understanding Airtight Ratings for LED Luminaires In the world of LED luminaires, efficiency, longevity, and safety are paramount. While we often focus on lumen output, color temperature, and design aesthetics, there is a critical element that is equally as important: airtight ratings. An airtight LED luminaire is designed to prevent the infiltration ## Pages - [Home](https://noralighting.com/) - Nora Lighting is a leading manufacturer of LED luminaires for residential, commercial, and institutional applications. - [Contact Us](https://noralighting.com/about-us/contact-us/) - Nora Lighting Contacts Sales Contacts E-Mail Us Nora Lighting Contacts Nora Lighting6505 Gayhart Street, Commerce, CA 90040tel 323-767-2600fax 800-500-9955NORA DISTRIBUTOR LOCATORThe Locator will provide you with an outlet based on your search specifications.Nora Distributor LocatorCUSTOMER SERVICEEmail or call to request for stock checks, order status, tracking information and product information.cs-team@noralighting.comORDERSFor all “New” PO submissions, please - [Literature](https://noralighting.com/resources/literature/) - Catalogs Downlight Catalog (ML-DOWNC0825) Product Preview: Q1 2026(ML-NPRODG0126) Apollo Catalog (ML-APOLLOC0425) Can-less Recessed Catalog (ML-RECCANC0625) Contractor Series (ML-CSC1024) Track Catalog Iolite Catalog(ML-IOLB1124) Pearl Catalog M2 Catalog(ML-M2B0322) Cobalt Catalog(ML-COBB0623) Linear / Accent Catalog(ML-LACB0724) L-Line Linear Catalog(ML-LLINEC0623) Panel Catalog(ML-PANELB0523) The Book(ML-BOOK0123) Sales Sheet Fire Rated Can-less Iolite Can-less Downlights Iolite Can-less Trimless LED Troffers Pearl Retrofit Series - [Privacy Policy](https://noralighting.com/privacy-policy/) - Privacy Policy Effective Date: July 20, 2026 This privacy policy for Nora Lighting ("We", "Us" or "Our") tells you how we may collect, use and share your information when you visit our website https://noralighting.com/. We appreciate your decision to use our website https://noralighting.com/ and to trust us with your valuable personal information. In this document, - [Cookie Policy](https://noralighting.com/cookie-policy/) - Cookie Policy Effective date: July 16, 2026 Last updated: July 16, 2026 What are cookies? This Cookie Policy explains what cookies are, how we use them, the types of cookies we use (i.e., the information we collect using cookies and how that information is used), and how to manage your cookie settings. Cookies are small - [Controls](https://noralighting.com/controls/) - Wireless Controls - Seamless Modernized Athena & Casambi Ready Products Housings 3" Apollo Round IC Air-Tight Housing with Field Changeable Optics, 1000lm-2000lm 3" Apollo Square IC Air-Tight Housing with Field Changeable Optics, 1000lm-2000lm 3" Apollo Round Non-IC Air-Tight Housing with Field Changeable Optics, 2000lm-3000lm 3" Apollo Square Non-IC Air-Tight Housing with Field Changeable Optics, 2000lm-3000lm - [Videos](https://noralighting.com/resources/videos/) - Latest Product Video More Videos - [Dimmer Compatibility](https://noralighting.com/resources/compatibility/) - Dimmer Compatibility CONTRACTOR SERIES Contractor Series Panels (NCSP-22 & NCSP-24) Contractor Series Flush Mounts (NCSD-R6) Contractor Series Retrofits (NCSR-R4 & NCSR-R6) (CS) Can-less Deep Downlights (NCSC-R4D1 & NCSC-R6D1) (CS) Can-less Wafer Downlights (NCSC-R4W2 & NCSC-R6W2) COMMERCIAL INDOOR Troffers (NPTCBSW) Center Basket Troffers (NPTCB) LED Panels (NPD, NPDBL & NPDBLSW Series) LED Strip Light (NLSTR) L-Line - [Pearl Retrofit](https://noralighting.com/pearl/) - 120V Pearl Retrofit 12V Pearl Retrofit Pearl Recessed LED Retrofit luminaires are the high-end, quality solution for easy LED retrofitting in residential and light commercial applications. With a maximum height of just 4-1/2″, Pearl can be retrofitted in most IC and non-IC housings– including shallow! The dimmable Pearl luminaires produce over 1200 lumens with COB LEDs - [Virtual Showroom](https://noralighting.com/virtual-showroom/) - Nora Lighting - Virtual Showroom Schedule a visit to the Learn & Experience Center in Los Angeles, CA Please enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.Name *FirstLastEmail *Company Name *Phone Number *State *Occupation *DesignerDistributorElectrical ContractorShowroomSpecifierSubmit Los Angeles Showroom Dallas Showroom - [Careers](https://noralighting.com/about-us/careers/) - We Are HiringWe are looking for exceptional individuals to join our team! We have several positions we are actively looking to fill with the right candidate! Don’t see a position you are interested in? Come back and visit our site again, employment opportunities are regularly updated. Nora Lighting offers competitive pay and a full benefits - [About Us](https://noralighting.com/about-us/) - Illuminating the future®…since 1989 Jilla and I founded Nora Lighting in 1989, only two years after fleeing religious persecution in Iran. At our inception we had a 1000 sq. ft. warehouse, four SKUs (two cans and two trims) and two full time employees – Jilla and another individual. In 1993, I decided to leave my - [Patents](https://noralighting.com/patents/) - Nora Lighting Patents The following products and services are protected by patents in the United States and in other jurisdictions of the world. This webpage is provided to satisfy the virtual patent marking provisions of various jurisdictions including the virtual patent marking provisions of the America Invents Act and to provide notice under 35 U.S.C. - [NUTP13 Calculator](https://noralighting.com/nutp13-calculator/) - [Apollo](https://noralighting.com/apollo-series/) - Introducing Apollo – a sleek, three-inch recessed lighting solution that combines cutting-edge COB LED technology with architectural-grade finishes and advanced TIR optics. Available in flanged and trimless options, Apollo is ideal for millwork applications, offering exceptional glare control and a range of versatile dimming protocols. Whether you’re illuminating residential or commercial spaces, Apollo ensures a seamless - [Compatibility Chart](https://noralighting.com/resources/compatibility-chart/) - Compatibility Chart Iolite Can-less DownlightCompatibility Chart Iolite DownlightCompatibility Chart Pearl RetrofitCompatibility Chart LMRAT Housing Compatibility Chart Fire Rated Junction Box Compatibility Chart Remote Emergency Compatibility Chart - [Terms and Conditions](https://noralighting.com/about-us/terms-and-conditions/) - PRICES All orders are subject to effective prices and terms of sale in effect on date of shipment and are subject to change without notice unless otherwise authorized and specified in writing by Nora Lighting. Written quotations expire 30 days from date of quotation unless otherwise specified. Nora Lighting requires a minimum of $50.00 per - [Order Status](https://noralighting.com/orderstatus/) - Check the status of your order. Search via Sales Order number or Purchase Order number. Contact customer service at 323-767-2600 with any questions. - [Apollo FAQ](https://noralighting.com/resources/apollo-faq/) - Apollo – Frequently Asked Questions Go to Web Page Download Sales Sheet Download Catalog General FAQ Question: Does the 2″ collar affect the 45° tilt functionality of the LED mechanism, such as causing flashing or obstructing the light beam?Yes, when using a 2” collar with the LED module tilted at 45°, some beam obstruction and - [chatgpt](https://noralighting.com/chatgpt/) - [mwai_chatbot id="default"] - [QUICK SHIP](https://noralighting.com/quickship/) - Nora Lighting QUICK SHIP Program Our Quick Ship program features SKUs that have the highest demand, along with our entire Contractor Series to meet contractors’ everyday needs.Eligible orders placed before 1PM PST ship the same day – ensuring you have a high quality product exactly when you need it!This page is subject to change without - [Contractor Series](https://noralighting.com/contractor-series/) - Today, contractors are purchasing sub-par products because of aggressive price points only to have upset end users and frustrateddistributors when product lacked quality and performance. We recognized the need to bridge the gap between price and quality, and the Nora Contractor Series is our answer.The Nora Contractor Series product line-up is concentrated on everyday distributor - [Quartz](https://noralighting.com/quartz/) - Quartz Round Quartz Square Quartz Round Square Quartz Series is an architectural and commercial grade high lumen LED downlight. Each luminaire includes two tunable switches; Selectable Lumens allows the end user to determine the wattage input & Selectable CCT changes the color temperature.Reflectors include two tension steel spring clips, which allow the luminaires to install - [Tape Lights](https://noralighting.com/tape/) - 9 Styles of LED Tape Light Nora Lighting offers one of the largest selections of LED tape light in the industry. The selection includes a wide variety of outputs and a large selection of installation accessories for large and small jobs.LED tape’s small profile, even light distribution and low cost make it the specifier’s and - [Products](https://noralighting.com/products/) - Products Text search Family 120V Tape Light(5) Aiden(5) Apollo(39) Ari Step Lights(3) Bravo FROST(25) Brick Step Lights(7) CCT Tape Light(3) Cobalt(46) COB LED Tape Light(2) Comfort Dim Tape Light(1) Contractor Series(15) Dipper(5) ELO(22) Fire Rated(8) FLAT(2) FLIN(13) Frame Light(2) High Output Tape Light(4) Hy-Brite Tape Light(4) iLENE(10) Iolite(114) Iolite Can-less(20) iPOINT(4) Jason(7) Josh(10) L-Line(44) LEDUR(35) - [Warranties](https://noralighting.com/resources/warranties/) - Limited Warranty Documents Five (5) Year Limited Warranty for Commercial LED Products Five (5) Year Limited Warranty for LED Products Three (3) Year Limited Warranty for LED Products One (1) Year Limited Warranty for LED Products LED Warranty Periods by Product Nora Lighting’s LED products are covered by a limited warranty for a period of - [Forms](https://noralighting.com/resources/forms/) - Forms Specification Registration Credit Card Authorization Sales Order New Account Application Literature Request - [Lighting 101](https://noralighting.com/lighting-101/) - Lighting 101 - FAQ Lighting is an essential element in interior design that can transform the mood, functionality, and aesthetics of any space. While natural light plays a significant role, artificial luminaires are equally important in creating a well-lit and inviting environment. In this Lighting 101 guide, we’ll explore several aspects of luminaires, their types, - [LEDUR Tunable](https://noralighting.com/ledur-tunable/) - 120V LEDUR LED Undercabinet Sales Sheet Product Page Product Video LEDUR Edge-Lit Undercabinet LEDUR TW Under cabinet luminaires include two switches to change the color temperature and lumen output.Five color temperature options and two lumen outputs create ten different fixtures in one! Five Different Sizes LEDUR TW Under cabinet are available 11″, 18″, 22″, 32″ - [Where to Buy](https://noralighting.com/where-to-buy/) - Thank you for your interest in Nora Lighting. Please visit Brick & Mortar page for physical store locations or E-Commerce page for online purchases. Note: Prices and terms vary per location. - [E-Commerce](https://noralighting.com/where-to-buy/e-commerce/) - Thank you for your interest in Nora Lighting. Below is a list of e-commerce websites that sell our products. Each website has their own terms and listed in alphanumeric order. Note: Pricing, terms and conditions may vary by website. Affordable LampsBuy Rite ElectricCans & FansFerguson HomeGeller LightingGoing LightingGordon Electric SupplyGoing LightingLamps PlusLight Bulbs Etc.Lighting and - [Brick & Mortar](https://noralighting.com/where-to-buy/brick-mortar/) - We strongly recommend that you call the distributor or showroom you have selected before visiting their location. Because each customer’s needs are different, we want you to be satisfied that you are contacting the business channel that can best fulfill your requirements. Thank you and we appreciate your interest in Nora Lighting. - [Sales Reps](https://noralighting.com/sales-reps/) - [Resources](https://noralighting.com/resources/) ## Landing Pages - [Track Lighting](https://noralighting.com/track-lighting/) - View Track Collections One Circuit Track Nora Lighting’s one circuit track system with miniature size and push in connector provides versatility for every lighting application. The system is designed and engineered for safety and easy installation. One Circuit Track & Accessories Two Circuit Track Nora Lighting’s two-circuit track system provides versatility for every lighting need. ## Products - [NLOS-S62L](https://noralighting.com/product/nlos-s62l/) - 6" SURF LED Surface Mount luminaires are only 11/16" thick with a DC driver mounted on the back. Luminaires resemble the appearance of a recessed downlight. The specially designed regressed light guide, with an embedded honeycomb lens, produces even illumination while reducing glare. Features Over 80% energy savings when compared to incandescent No housing needed, surface-mounted over junction box Other sizes and shapes are available Edge-lit LEDs for a uniform, clean appearance Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Lumens / Wattage: Up to 1150lm / 14W Color Temperature: Dedicated CCT (2700K, 3000K, 3500K, 5000K) Color Rendering Index: 90+ CRI Finish: White Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NLOS-R7TW](https://noralighting.com/product/nlos-r7tw/) - 7" SURF LED Surface Mount luminaires are only 11/16" thick with a DC driver mounted on the back. Luminaires resemble the appearance of a recessed downlight. The specially designed regressed light guide, with an embedded honeycomb lens, produces even illumination while reducing glare. Features Over 80% energy savings when compared to incandescent No housing needed, surface-mounted over junction box Other sizes and shapes are available Edge-lit LEDs for a uniform, clean appearance Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Lumens / Wattage: Up to 1350lm / 14W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Color Rendering Index: 90+ CRI Finish: White Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NLOS-S42L](https://noralighting.com/product/nlos-s42l/) - 4" SURF LED Surface Mount luminaires are only 11/16" thick with a DC driver mounted on the back. Luminaires resemble the appearance of a recessed downlight. The specially designed regressed light guide, with an embedded honeycomb lens, produces even illumination while reducing glare. Features Over 80% energy savings when compared to incandescent No housing needed, surface-mounted over junction box Other sizes and shapes are available Edge-lit LEDs for a uniform, clean appearance Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Lumens / Wattage: Up to 750lm / 11W Color Temperature: Dedicated CCT (2700K, 3000K, 3500K, 4000K, 5000K) Color Rendering Index: 90+ CRI Finish: White Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NLOS-R72L](https://noralighting.com/product/nlos-r72l/) - 7" SURF LED Surface Mount luminaires are only 11/16" thick with a DC driver mounted on the back. Luminaires resemble the appearance of a recessed downlight. The specially designed regressed light guide, with an embedded honeycomb lens, produces even illumination while reducing glare. Features Over 80% energy savings when compared to incandescent No housing needed, surface-mounted over junction box Other sizes and shapes are available Edge-lit LEDs for a uniform, clean appearance Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Lumens / Wattage: Up to 1100lm / 14W Color Temperature: Dedicated CCT (2700K, 3000K, 4000K, 5000K) Color Rendering Index: 90+ CRI Finish: White Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NLOS-R4TW](https://noralighting.com/product/nlos-r4tw/) - 4" SURF LED Surface Mount luminaires are only 11/16" thick with a DC driver mounted on the back. Luminaires resemble the appearance of a recessed downlight. The specially designed regressed light guide, with an embedded honeycomb lens, produces even illumination while reducing glare. Features Over 80% energy savings when compared to incandescent No housing needed, surface-mounted over junction box Other sizes and shapes are available Edge-lit LEDs for a uniform, clean appearance Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Lumens / Wattage: Up to 950lm / 10W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Color Rendering Index: 90+ CRI Finish: White Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NSLIM-4RL1TWMPW](https://noralighting.com/product/nslim-4rl1twmpw/) - 4" Ultra slim LED surface mount boasts a low-profile form factor, lending it a sleek design. Trim easily removes for installation and can easily be swapped with different finish. The Slim is ideal for residential or commercial spaces and creates a polished aesthetic. Features AC LED (No Driver) Dimmable Five color temperatures in each fixture Mount on 4" octagonal junction box Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: Up to 800lm / 11W Color Temperature: Selectable CCT (2700K/3000K/3500K/4000K/5000K) Color Rendering Index: 90+ CRI Finish: White (Black and Silver face plate available, NSLIM-4RDT) Retrofit Kit: Each luminaire includes a retrofit kit Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NSLIM-4REGL1TWMPW](https://noralighting.com/product/nslim-4regl1twmpw/) - 4" Ultra-slim LED surface mount boasts a low-profile form factor, lending it a sleek design. A regressed light source gives the appearance of a recessed luminaire. The Slim is ideal for residential or commercial spaces and creates a polished aesthetic. Features AC LED (No Driver) Dimmable Five color temperatures in each fixture Mount on 4" octagonal junction box Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: Up to 950lm / 13W Color Temperature: Selectable CCT (2700K/3000K/3500K/4000K/5000K) Color Rendering Index: 90+ CRI Finish: White Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NLOPAC-R6TW](https://noralighting.com/product/nlopac-r6tw/) - The AC Opal LED luminaire is designed to surface mount over a standard junction box. The low-profile dimmable luminaire produces even illumination and is cETLus listed for wet locations. Features AC LED (No Driver) Dimmable Five color temperatures in each fixture Mount on standard 4" junction box Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: Over 1200lm / 16W Color Temperature: Selectable CCT (2700K/3000K/3500K/4000K/5000K) Color Rendering Index: 90+ CRI Finish: Natural Metal or White Optional Accessory: NLOPAC-R6TWRECKIT: Retrofit Kit for 5" or 6" Recessed Housings NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NLOPAC-R6REGT24](https://noralighting.com/product/nlopac-r6regt24/) - Regressed Opal LED luminaires are designed to resemble the appearance of a recessed trim. Surface mount fixtures can be mounted over a standard junction box or retrofit with a 5" or 6" recessed housing. Regressed Opal produces even illumination with no diode image, from bright to dim. The low profile unit is cETLus wet listed and produces 900 lumens at 90+ CRI. Available in white finish the Opal is an excellent energy efficient lighting solution for laundry rooms, closets, pantries, hallways and showers in residential and commercial retrofit or new construction applications. Features AC LED (No Driver) Mount on standard 3" or 4" junction boxes and 1/2" deep pancake boxes Optional retrofit kit accessory (NLOPAC-56RECKIT) for installation over a 5" or 6" recessed housing Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Lumens / Wattage: 950lm / 13W Color Temperature: 2700K or 4000K Color Rendering Index: 90+ CRI Finish: White Optional Accessories: NLOPAC-56RECKIT-2 = Retrofit Kit for mounting on 5" or 6" recessed housings NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NLOPAC-R6REGT24TW](https://noralighting.com/product/nlopac-r6regt24tw/) - The Regressed AC Opal fixture is designed to surface mount over a standard junction box. Luminaires include a selectable color temperature switch located under the lens to change the color temperature without removing the fixture. The regressed light source gives the appearance of a recessed luminaire. Features Recessed appearance AC LED (No Driver) Five color temperatures in each fixture (2700K / 3000K / 3500K / 4000K / 5000K) Mount on standard 3" or 4" junction boxes and 1/2" deep pancake boxes Optional retrofit kit accessory (NLOPAC-R6TWRECKIT) for installation over a 5" or 6" recessed housing Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Lumens / Wattage: 1100lm / 11W Color Temperature: Selectable CCT (2700K/3000K/3500K/4000K/5000K) Color Rendering Index: 90+ CRI Finish: White Optional Accessories: NLOPAC-R6TWRECKIT: Retrofit Kit for 5" or 6" Recessed Housings NLOPAC-4BKT-2: Bracket for 4" Square Junction Boxes NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NLOPAC-R4TW](https://noralighting.com/product/nlopac-r4tw/) - The AC Opal LED Series LED fixture is designed to surface mount over a standard junction box. The low profile dimmable luminaire produces even illumination and is cETLus listed for wet locations. Features AC LED (No Driver) Dimmable Five color temperatures in each fixture Mount on standard junction box Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: Up to 700lm / 10W Color Temperature: Selectable CCT (2700K/3000K/3500K/4000K/5000K) Color Rendering Index: 90+ CRI Finish: Natural Metal or White Retrofit Kit: Each luminaire includes a retrofit kit Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NLOPAC-R4REGT24](https://noralighting.com/product/nlopac-r4regt24/) - Regressed Opal LED luminaires are designed to resemble the appearance of a recessed trim. Surface mount fixtures can be mounted over a standard junction box. Regressed Opal produces even illumination with no diode image, from bright to dim. The low profile unit is cETLus wet listed and produces 650 lumens at 90+ CRI. Available in white finish the Opal is an excellent energy efficient lighting solution for laundry rooms, closets, pantries, hallways and showers in residential and commercial retrofit or new construction applications. Features AC LED (No Driver) Mount on standard 3" or 4" junction boxes and 1/2" deep pancake boxes Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Lumens / Wattage: Up to 700lm / 11W Color Temperature: 2700K, 3000K or 4000K Color Rendering Index: 90+ CRI Finish: White Optional Accessory: NLOPAC-R4REGRECKIT: Retrofit Kit for 4″ Recessed Housings NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NLOPAC-R4509T24](https://noralighting.com/product/nlopac-r4509t24/) - The AC Opal LED Series LED fixture is designed to surface mount over a standard junction box. The low profile dimmable luminaire produces even illumination and is cETLus listed for wet locations. Features 4", 6" and 8" sizes AC LED (No Driver) Dimmable Mount on standard 4" junction box Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 700lm / 10.5W Color Temperature: 2700K, 3000K, 4000K or 5000K Color Rendering Index: 90+ CRI Finish: Black, Bronze, Natural Metal or White Optional Accessory: NLOPAC-R4REGRECKIT: Retrofit Kit for 4″ Recessed Housings NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NLOPAC-R6509T24](https://noralighting.com/product/nlopac-r6509t24/) - ** While Supplies Last: Replacement Item: NLOPAC2-R6509T24 ** The AC Opal LED Series LED fixture is designed to surface mount over a standard junction box. The low profile dimmable luminaire produces even illumination and is cULus listed for wet locations. Features 4", 6" and 8" sizes AC LED (No Driver) Dimmable Mount on standard 4" junction box Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: Up to 1150lm / 15W Color Temperature: 2700K, 3000K, 4000K or 5000K Color Rendering Index: 90+ CRI Finish: Natural Metal or White Optional Accessories: NLOPAC-56RECKIT-2: Retrofit Kit for 5" or 6" Recessed Housings NLOPAC-4BKT-2: Universal Bracket for 3" or 4" Junction Boxes NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NLOPAC2-R6509T24](https://noralighting.com/product/nlopac2-r6509t24/) - The AC Opal LED Series 2 LED fixture is designed to surface mount over a standard junction box. The low profile dimmable luminaire produces even illumination and is cETLus listed for wet locations. Features AC LED (No Driver) Dimmable Dedicated CCT options Retrofit kit not included (ordered separately) Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: Up to 1100lm / 16.5W Color Temperature: 2700K, 3000K, 4000K or 5000K Color Rendering Index: 90+ CRI Finish: Black or White Optional Remote Emergency: NLOPAC-56RECKIT-2: Retrofit Kit for 5" or 6" Recessed Housings NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NFRC-R6W3TW](https://noralighting.com/product/nfrc-r6w3tw/) - 6" Fire-rated can-less recessed LED downlights are ETL listed, tested and certified to UL 263 & ASTM E119 for 2-hour fire rating. Wafer design allows luminaires to be installed in shallow plenums and includes a selectable five color temperature switch. Multi-piece construction provides an extra layer of protection to prevent the spread of fire above the ceiling within a two-hour rating. Features cETLus Listed and Certified to UL 263 & ASTM E119 for 2-Hour Fire Rating Multi-piece construction provides an extra layer of protection and prevents the spread of fire No housing required and includes a pre-wired junction box Quick disconnect allows for easy installation The junction box includes a color temperature switch IC Airtight rated Triac or ELV dimming cETLus Listed for Wet Locations ENERGY STAR certified Certified to the high efficacy requirements of California Title 24 JA8-2025 Input Voltage: 120V (consult factory for 120-277V) Lumens / Wattage: 1500lm / 15W Color Temperature: Field Selectable CCT Switch (2700K / 3000K / 3500K / 4000K / 5000K) Color Rendering Index: 90+ CRI Dimming: Triac or ELV Finish: White Accessories: NF-R246: Universal New Construction Frame-In NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NFRC-R4W3TW](https://noralighting.com/product/nfrc-r4w3tw/) - 4" Fire-rated can-less recessed LED downlights are ETL listed, tested and certified to UL 263 & ASTM E119 for 2-hour fire rating. Wafer design allows luminaires to be installed in shallow plenums and includes a selectable five color temperature switch. Multi-piece construction provides an extra layer of protection to prevent the spread of fire above the ceiling within a two-hour rating. Features cETLus Listed and Certified to UL 263 & ASTM E119 for 2-Hour Fire Rating Multi-piece construction provides an extra layer of protection and prevents the spread of fire No housing required and includes a pre-wired junction box Quick disconnect allows for easy installation. The junction box includes a color temperature switch IC Airtight rated Triac or ELV dimming cETLus Listed for Wet Locations ENERGY STAR certified Certified to the high efficacy requirements of California Title 24 JA8-2025 Input Voltage: 120V (consult factory for 120-277V) Lumens / Wattage: 1200lm / 12W Color Temperature: Field Selectable CCT Switch (2700K / 3000K / 3500K / 4000K / 5000K) Color Rendering Index: 90+ CRI Dimming: Triac or ELV Finish: White Accessories: NF-R246: Universal New Construction Frame-In NFC-R430: New Construction Frame-In with Collar NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NFRC-R6W2TW](https://noralighting.com/product/nfrc-r6w2tw/) - 6" Fire-rated can-less recessed LED downlights are ETL listed, tested and certified to UL 263 & ASTM E119 for 2-hour fire rating. Wafer design allows luminaires to be installed in shallow plenums and includes a selectable five color temperature switch. Multi-piece construction provides an extra layer of protection to prevent the spread of fire above the ceiling within a two-hour rating. Features cETLus Listed and Certified to UL 263 & ASTM E119 for 2-Hour Fire Rating Multi-piece construction provides an extra layer of protection and prevents the spread of fire No housing required and includes a pre-wired junction box Quick disconnect allows for easy installation The junction box includes a color temperature switch IC Airtight rated Triac or ELV dimming cETLus Listed for Wet Locations ENERGY STAR certified Certified to the high efficacy requirements of California Title 24 JA8-2025 Input Voltage: 120V (consult factory for 120-277V) Lumens / Wattage: 1500lm / 15W Color Temperature: Field Selectable CCT Switch (2700K / 3000K / 3500K / 4000K / 5000K) Color Rendering Index: 90+ CRI Dimming: Triac or ELV Finish: White Accessories: NF-R246: Universal New Construction Frame-In NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NFRC-R4W2TW](https://noralighting.com/product/nfrc-r4w2tw/) - 4" Fire-rated can-less recessed LED downlights are ETL listed, tested and certified to UL 263 & ASTM E119 for 2-hour fire rating. Wafer design allows luminaires to be installed in shallow plenums and includes a selectable five color temperature switch. Multi-piece construction provides an extra layer of protection to prevent the spread of fire above the ceiling within a two-hour rating. Features cETLus Listed and Certified to UL 263 & ASTM E119 for 2-Hour Fire Rating Multi-piece construction provides an extra layer of protection and prevents the spread of fire No housing required and includes a pre-wired junction box Quick disconnect allows for easy installation The junction box includes a color temperature switch IC Airtight rated Triac or ELV dimming cETLus Listed for Wet Locations ENERGY STAR certified Certified to the high efficacy requirements of California Title 24 JA8-2025 Input Voltage: 120V (consult factory for 120-277V) Lumens / Wattage: 1200lm / 12W Color Temperature: Field Selectable CCT Switch (2700K / 3000K / 3500K / 4000K / 5000K) Color Rendering Index: 90+ CRI Dimming: Triac or ELV Finish: White Accessories: NF-R246: Universal New Construction Frame-In NFC-R430: New Construction Frame-In with Collar NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NFRC-R6W1TW](https://noralighting.com/product/nfrc-r6w1tw/) - 6" Fire-rated can-less recessed LED downlights are ETL listed, tested and certified to UL 263 & ASTM E119 for 2-hour fire rating. Wafer design allows luminaires to be installed in shallow plenums and includes a selectable five color temperature switch. Multi-piece construction provides an extra layer of protection to prevent the spread of fire above the ceiling within a two-hour rating. Features cETLus Listed and Certified to UL 263 & ASTM E119 for 2-Hour Fire Rating Multi-piece construction provides an extra layer of protection and prevents the spread of fire No housing required and includes a pre-wired junction box Quick disconnect allows for easy installation The junction box includes a color temperature switch IC Airtight rated Triac or ELV dimming cETLus Listed for Wet Locations ENERGY STAR certified Certified to the high efficacy requirements of California Title 24 JA8-2025 Input Voltage: 120V (consult factory for 120-277V) Lumens / Wattage: 1550lm / 15W Color Temperature: Field Selectable CCT Switch (2700K / 3000K / 3500K / 4000K / 5000K) Color Rendering Index: 90+ CRI Dimming: Triac or ELV Finish: White Accessories: NF-R246: Universal New Construction Frame-In NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NFRC-R4W1TW](https://noralighting.com/product/nfrc-r4w1tw/) - 4" Fire-rated can-less recessed LED downlights are ETL listed, tested and certified to UL 263 & ASTM E119 for 2-hour fire rating. Wafer design allows luminaires to be installed in shallow plenums and includes a selectable five color temperature switch. Multi-piece construction provides an extra layer of protection to prevent the spread of fire above the ceiling within a two-hour rating. Features cETLus Listed and Certified to UL 263 & ASTM E119 for 2-Hour Fire Rating Multi-piece construction provides an extra layer of protection and prevents the spread of fire No housing required and includes a pre-wired junction box Quick disconnect allows for easy installation The junction box includes a color temperature switch IC Airtight rated Triac or ELV dimming cETLus Listed for Wet Locations ENERGY STAR certified Certified to the high efficacy requirements of California Title 24 JA8-2025 Input Voltage: 120V (consult factory for 120-277V) Lumens / Wattage: 1200lm / 12W Color Temperature: Field Selectable CCT Switch (2700K / 3000K / 3500K / 4000K / 5000K) Color Rendering Index: 90+ CRI Dimming: Triac or ELV Finish: White Accessories: NF-R246: Universal New Construction Frame-In NFC-R430: New Construction Frame-In with Collar NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NMW-2](https://noralighting.com/product/nmw-2/) - 2" M-Wave adjustable downlights are unique and functional. Luminaires extend up to 90° and can be rotated 350° to illuminate any surface. Can-less recessed luminaires require no housing, while maintaining air-tight requirements in IC or Non-IC applications. Lumens / Wattage: 750lm / 9W Color Temperatures: 2700K or 3000K Finish: Black or White Optics: Narrow Flood installed (spot and narrow spot optics available) Accessories: NMWA-2OPTNFL: Spot Optic NMWA-2OPTSP: Narrow Spot Optic NCA-EW-4: 4' Quick Connect Extension Cable NCA-EW-10: 10' Quick Connect Extension Cable NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NMW-4](https://noralighting.com/product/nmw-4/) - 4" M-Wave adjustable downlights are unique and functional. Luminaires extend up to 90° and can be rotated 350° to illuminate any surface. Can-less recessed luminaires require no housing, while maintaining air-tight requirements in IC or Non-IC applications. Lumens / Wattage: 1250lm / 14W Color Temperatures: 2700K or 3000K Finish: Black or White Optics: Narrow Flood installed (spot and narrow spot optics available) Accessories: NMWA-4OPTNFL: Spot Optic NMWA-4OPTSP: Narrow Spot Optic NCA-EW-4: 4' Quick Connect Extension Cable NCA-EW-10: 10' Quick Connect Extension Cable NF-R124: Universal New Construction Frame-In NFC-R313: New Construction Frame-In with Collar NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NIOC-24LED](https://noralighting.com/product/nioc-24led/) - IC rated aluminum die-cast LED module with two tension steel spring clips. Module includes a 7" quick connect wire and threaded to fit the trim and transfer heat. Iolite can-less LED modules require a compatible driver box and trim. Compatible Driver Box: NJCB-12: 12W Driver; 120V input, Phase dimming NJCB-12LE4: 12W Driver; 120-277V input, Phase or 0-10V dimming Compatible Trims: NIOC-2RNB: 2" Iolite Can-less Round Bullnose Trim NIOC-2RNDC: 2" Iolite Can-less Round Downlight Trim NIOC-2SNDSQ: 2" Iolite Can-less Square Downlight Trim NIOC-2RPH: 2" Iolite Can-less Round Pinhole Trim NIOC-4RNB: 4" Iolite Can-less Round Bullnose Trim NIOC-4RNDC: 4" Iolite Can-less Round Downlight Trim NIOC-4RPH: 4" Iolite Can-less Round Pinhole Trim NIOC-4RSLA: 4" Iolite Can-less Round Adjustable Trim NIOC-4RSP: 4" Iolite Can-less Round Sloped Trim NIOC-4RTLNDC: 4" Iolite Can-less Round Trimless Downlight NIOC-4RTLSLA: 4" Iolite Can-less Round Trimless Adjustable Slot NIOC-4SNDSQ: 4" Iolite Can-less Square Downlight Trim Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: Up to 1200lm / 12W Optics: Three field changeable optics included Accessories: NCA-EW-4: 4' Quick Connect Extension Cable NCA-EW-10: 10' Quick Connect Extension Cable NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NIOC-1LED](https://noralighting.com/product/nioc-1led/) - IC rated aluminum die-cast LED module with two tension steel spring clips. Module includes a 7" quick connect wire and threaded to fit the trim and transfer heat. Iolite can-less LED modules require a compatible driver box and trim. Compatible Driver Box: NJCB-09 Compatible Trims: NIOC-1RNB, NIOC-1RNG, NIOC-1SNG Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: Up to 900lm / 9W Optics: Three field changeable optics included Accessories: NCA-EW-4: 4' Quick Connect Extension Cable NCA-EW-10: 10' Quick Connect Extension Cable NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NLTH-81TW](https://noralighting.com/product/nlth-81tw/) - 8" Theia LED luminaires are commercial grade downlights designed for easy installation into new construction or remodel applications. Tunable white luminaires include an integral color temperature switch located on the junction box of each luminaire with a quick connect that allows for easy disconnect and mounting in the ceiling. No housing required! Input Voltage: 120VAC or 120-277VAC Rating: IC Airtight Lumens / Wattage: Up to 2100lm / 22W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Dimming: Triac/ELV or 0-10V Reflector Finish: Haze or White Flange Finish: White Listing: cETLus Listed for Wet Locations Warranty: Five Years Accessories: NF-R725: New Construction Frame NFC-R725: New Construction Frame with Collar NFP-R725: New Construction Plate NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NLTH-61TW](https://noralighting.com/product/nlth-61tw/) - 6" Theia LED luminaires are commercial grade downlights designed for easy installation into new construction or remodel applications. Tunable white luminaires include an integral color temperature switch located on the junction box of each luminaire with a quick connect that allows for easy disconnect and mounting in the ceiling. No housing required! Input Voltage: 120VAC or 120-277VAC Rating: IC Airtight Lumens / Wattage: Up to 1400lm / 15W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Dimming: Triac/ELV or 0-10V Reflector Finish: Haze or White Flange Finish: White Listing: cETLus Listed for Wet Locations Warranty: Five Years Accessories: NF-R246: Universal New Construction Frame-In NQZ-6R-F: New Construction Frame-In with Collar NFP-R613: New Construction Plate NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NLTH-41TW](https://noralighting.com/product/nlth-41tw/) - 4" Theia LED luminaires are commercial grade downlights designed for easy installation into new construction or remodel applications. Tunable white luminaires include an integral color temperature switch located on the junction box of each luminaire with a quick connect that allows for easy disconnect and mounting in the ceiling. No housing required! Input Voltage: 120VAC or 120-277VAC Rating: IC Airtight Lumens / Wattage: Up to 950lm / 10W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Dimming: Triac/ELV or 0-10V Reflector Finish: Haze or White Flange Finish: White Accessories: NF-R246: New Construction Frame NFC-R430: New Construction Frame-In with Collar NFP-R413: New Construction Plate NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NM4-RG](https://noralighting.com/product/nm4-rg/) - 4" M4 Round LED adjustable gimbal are ideal for remodel or new constructions in residential and light commercial applications. IC Air-Tight rated luminaires require no housing, making installation easy. Features 15° Adjustable No housing required - IC Airtight rated Easy installation for remodel or new construction applications Quick disconnect cables allow for extended lengths Triac or ELV dimming 5-year limited warranty Certified to the high efficacy requirements of California Title 24 JA8-2025 Wet Location Listed Input Voltage: 120V Lumens / Wattage: 950lm / 12W Color Temperature: 2700K or 3000K Color Rendering Index: 90+ CRI Finish: Black or White Accessories: NF-R246: Universal New Construction Frame-In NFC-R430: New Construction Frame-In with Collar NM2-EW-4: 4' Quick Connect Extension Cable NM2-EW-10: 10' Quick Connect Extension Cable NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NM4-RDC](https://noralighting.com/product/nm4-rdc/) - 4" M4 Round LED downlight are ideal for remodel or new constructions in residential and light commercial applications. IC Air-Tight rated luminaires require no housing, making installation easy. Features No housing required - IC Airtight rated Easy installation for remodel or new construction applications Quick disconnect cables allow for extended lengths Triac or ELV dimming 5-year limited warranty Certified to the high efficacy requirements of California Title 24 JA8-2025 Wet Location Listed Input Voltage: 120V Lumens / Wattage: 1100lm / 15W Color Temperature: 2700K or 3000K Color Rendering Index: 90+ CRI Finish: Black or White Accessories: NM4-SDT: Square Baffle Trim NFC-R375: New Construction Frame-In with Collar NM2-EW-4: 4' Quick Connect Extension Cable NM2-EW-10: 10' Quick Connect Extension Cable NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NM4-R470](https://noralighting.com/product/nm4-r470/) - 4" M4 Round LED Elbow downlight features an adjustable head that extends 75° and rotates 300° for precise aiming. Quality and convenience with easy installation for insulated or non-insulated applications. Luminaires can be configured into square trim with accessory. Features 75° Adjustable No housing required - IC Airtight rated Easy installation for remodel or new construction applications Quick disconnect cables allow for extended lengths Triac or ELV dimming 5-year limited warranty Certified to the high efficacy requirements of California Title 24 JA8-2025 Input Voltage: 120V Lumens / Wattage: 950lm / 12W Color Temperature: 2700K or 3000K Color Rendering Index: 90+ CRI Finish: Black or White Accessories: NM4-SET: Square Trim NF-R246: Universal New Construction Frame-In NFC-R275: New Construction Frame-In with Collar NM2-EW-4: 4' Quick Connect Extension Cable NM2-EW-10: 10' Quick Connect Extension Cable NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NM2-2RTLDC](https://noralighting.com/product/nm2-2rtldc/) - M2 downlight series features quality and convenience for easy installation in new construction or remodel applications, no housing is required. M2 includes a quick connect that allows the junction box to easily disconnect and mount in the ceiling. Features No housing required - IC Airtight rated Trimless mud plate required (NM2-TLMR-R) Easy installation for remodel or new construction applications Deep regressed downlight Quick disconnect cables allow for extended lengths Triac or ELV dimming 5-year limited warranty Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 750lm / 8W or 900lm / 10W Color Temperature: 2700K, 3000K or 4000K Color Rendering Index: 90+ CRI Finish: Black or White Mud Plate: NM2-TLMR-R: (required) Accessories: NF-R246: Universal New Construction Frame-In NFC-R275: New Construction Frame-In with Collar NMA-EW-4: 4' Quick Connect Extension Cable NMA-EW-10: 10' Quick Connect Extension Cable NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NM2-2SDC](https://noralighting.com/product/nm2-2sdc/) - M2 downlight series features quality and convenience for easy installation in new construction or remodel applications, no housing is required. M2 includes a quick connect that allows the junction box to easily disconnect and mount in the ceiling. Features No housing required - IC Airtight rated Easy installation for remodel or new construction applications Deep regressed downlight Quick disconnect cables allow for extended lengths Triac or ELV dimming 5-year limited warranty Wet Location Listed Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 600lm / 8W or 850lm / 10W Color Temperature: 2700K or 3000K Color Rendering Index: 90+ CRI Finish: Black or White Accessories: NF-R246: Universal New Construction Frame-In NM2-EW-4: 4' Quick Connect Extension Cable NM2-EW-10: 10' Quick Connect Extension Cable NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NM2-2SB](https://noralighting.com/product/nm2-2sb/) - M2 downlight series features quality and convenience for easy installation in new construction or remodel applications, no housing is required. M2 includes a quick connect that allows the junction box to easily disconnect and mount in the ceiling. Features No housing required - IC Airtight rated Wet Location rated Easy installation for remodel or new construction applications Deep regressed baffle Quick disconnect cables allow for extended lengths Triac or ELV dimming 5-year limited warranty Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 600lm / 8W or 850lm / 10W Color Temperature: 2700K or 3000K Color Rendering Index: 90+ CRI Finish: Black or White Accessories: NF-R246: Universal New Construction Frame-In NM2-EW-4: 4' Quick Connect Extension Cable NM2-EW-10: 10' Quick Connect Extension Cable NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NM2-2RG](https://noralighting.com/product/nm2-2rg/) - M2 downlight series features quality and convenience for easy installation in new construction or remodel applications, no housing is required. M2 includes a quick connect that allows the junction box to easily disconnect and mount in the ceiling. Features No housing required - IC Airtight rated Wet Location rated Easy installation for remodel or new construction applications Quick disconnect cables allow for extended lengths Triac or ELV dimming 5-year limited warranty Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 400lm / 6W or 600lm / 8W Color Temperature: 2700K, 3000K or 4000K (600lm only) Color Rendering Index: 90+ CRI Finish: Black or White Accessories: NM2-MLS1: One Head Multiple Lighting System Plate NM2-MLS2: Two Head Multiple Lighting System Plate NM2-MLS3: Three Head Multiple Lighting System Plate NM2-2SGT: Square Trim for NM2-2RG NF-R246: Universal New Construction Frame-In NM2-EW-4: 4' Quick Connect Extension Cable NM2-EW-10: 10' Quick Connect Extension Cable NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NM2-2RDCS](https://noralighting.com/product/nm2-2rdcs/) - M2 downlight series features quality and convenience for easy installation in new construction or remodel applications, no housing is required. M2 includes a quick connect that allows the junction box to easily disconnect and mount in the ceiling. Features No housing required - IC Airtight rated Easy installation for remodel or new construction applications Deep regressed downlight with lens Quick disconnect cables allow for extended lengths Triac or ELV dimming 5-year limited warranty Certified to the high efficacy requirements of California Title 24 JA8-2025 Wet Location Listed Lumens / Wattage: 400lm / 6W, 600lm / 8W or 850lm / 10W Color Temperature: 2700K, 3000K or 4000K Color Rendering Index: 90+ CRI Finish: Black or White Accessories: NM2-MLS1: One Head Multiple Lighting System Plate NM2-MLS2: Two Head Multiple Lighting System Plate NM2-MLS3: Three Head Multiple Lighting System Plate NF-R246: Universal New Construction Frame-In NM2-EW-4: 4' Quick Connect Extension Cable NM2-EW-10: 10' Quick Connect Extension Cable NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NM2-2RDC](https://noralighting.com/product/nm2-2rdc/) - M2 downlight series features quality and convenience for easy installation in new construction or remodel applications, no housing is required. M2 includes a quick connect that allows the junction box to easily disconnect and mount in the ceiling. Features No housing required - IC Airtight rated Wet Location rated Easy installation for remodel or new construction applications Deep regressed downlight with field changeable trims Quick disconnect cables allow for extended lengths Triac or ELV dimming 5-year limited warranty Certified to the high efficacy requirements of California Title 24 JA8-2025 Wet Location Listed Lumens / Wattage: 400lm / 6W, 600lm / 8W or 850lm / 10W Color Temperature: 2700K, 3000K or 4000K Color Rendering Index: 90+ CRI Finish: Black or White Accessories: NM2-MLS1: One Head Multiple Lighting System Plate NM2-MLS2: Two Head Multiple Lighting System Plate NM2-MLS3: Three Head Multiple Lighting System Plate NM2-2SDT: Square Trim NM2-2RPH: Round Pinhole Trim NM2-2RW: Round Wall Wash Trim NM2-2REFL: Reflector Insert NM2-2BAF: Baffle Insert NF-R246: Universal New Construction Frame-In NM2-EW-4: 4' Quick Connect Extension Cable NM2-EW-10: 10' Quick Connect Extension Cable NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NM2-2R270](https://noralighting.com/product/nm2-2r270/) - M2 downlight series features quality and convenience for easy installation in new construction or remodel applications, no housing is required. M2 includes a quick connect that allows the junction box to easily disconnect and mount in the ceiling. Features No housing required - IC Air-tght rated Easy installation for remodel or new construction applications Quick disconnect cables allow for extended lengths Triac or ELV dimming 5-year limited warranty Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 500lm / 6W Color Temperature: 2700K or 3000K Color Rendering Index: 90+ CRI Finish: Black or White Accessories: NM2-MLS1: One Head Multiple Lighting System Plate NM2-MLS2: Two Head Multiple Lighting System Plate NM2-MLS3: Three Head Multiple Lighting System Plate NM2-2SET: Square Trim for NM2-2R270 NF-R246: Universal New Construction Frame-In NM2-EW-4: 4' Quick Connect Extension Cable NM2-EW-10: 10' Quick Connect Extension Cable NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NM1-PRDC](https://noralighting.com/product/nm1-prdc/) - 120V M1+ downlights features quality and convenience with easy installation for any application. Die-cast trims come standard in black or white and include a pre-wired junction box. Features No housing required – IC Airtight rated Wet Location rated Easy installation for remodel or new construction applications Deep regressed round downlight with square trim accessory Quick disconnect allows for extended lengths Triac or ELV dimming 5-year limited warranty Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 600lm / 9W Color Temperature: 2700K or 3000K Color Rendering Index: 90+ CRI Finish: Black, Bronze, or White Accessories: NM1-PSDT: Square Trim NMA-EW-4: 4" Quick Connect Extension Cable NMA-EW-10: 10" Quick Connect Extension Cable NF-R2: New Construction Frame-In NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NMC-4RTWMPW](https://noralighting.com/product/nmc-4rtwmpw/) - 4" M-Curve adjustable can-less LED downlights are unique and functional. Luminaires extend up to 80° and can be rotated 360° to illuminate any surface. Can-less downlights are easy to install in new construction or remodel applications. Luminaires include a selectable color temperature switch located on the junction box of each luminaire with a quick connect that allows for easy disconnect and mounting in the ceiling. Features No housing required and includes pre-wired junction box 80° Tilt / 360° Rotation Quick disconnect allows for easy installation Junction box includes selectable color temperature switch IC Airtight rated Triac or ELV dimming cETLus Listed for Wet locations Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 900lm / 9W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Finish: White Accessories: NFC-R375: New Construction Frame-In with Collar NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NMC-6RTWMPW](https://noralighting.com/product/nmc-6rtwmpw/) - 6" M-Curve adjustable can-less LED downlights are unique and functional. Luminaires extend up to 80° and can be rotated 360° to illuminate any surface. Can-less downlights are easy to install in new construction or remodel applications. Luminaires include a selectable color temperature switch located on the junction box of each luminaire with a quick connect that allows for easy disconnect and mounting in the ceiling. Features No housing required and includes pre-wired junction box 80° Tilt / 360° Rotation Quick disconnect allows for easy installation Junction box includes selectable color temperature switch IC Airtight rated Triac or ELV dimming cETLus Listed for Wet locations Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 1300lm / 13W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Finish: White Accessories: NFC-R5: New Construction Frame-In with Collar for 6" M-Curve NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NFLINA-R4TW](https://noralighting.com/product/nflina-r4tw/) - 4" FLIN adjustable can-less LED downlights feature two-axis rotation with 25° tilt and 180° rotation. Can-less downlights are easy to install in new construction or remodel applications. Luminaires include a selectable color temperature switch located on the junction box of each luminaire with a quick connect that allows for easy disconnect and mounting in the ceiling. Features No housing required and includes pre-wired junction box Quick disconnect allows for easy installation Junction box includes color temperature switch IC Airtight rated cETLus Listed for Wet locations Certified to the high efficacy requirements of California Title 24 JA8-2025 Input Voltage: 120V or 120-277V Lumens / Wattage: 900lm / 10W Color Temperature: Field Selectable CCT Switch (2700K / 3000K / 3500K / 4000K / 5000K) Color Rendering Index: 90+ CRI Dimming: Phase (Triac/ELV) or 0-10V Finish: White Accessories: NF-R246: Universal New Construction Frame-In NFC-R430: New Construction Frame-In with Collar NFP-R413: New Construction Plate NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NFLINA-R6TW](https://noralighting.com/product/nflina-r6tw/) - 6" FLIN adjustable can-less LED downlights feature two-axis rotation with 25° tilt and 180° rotation. Can-less downlights are easy to install in new construction or remodel applications. Luminaires include a selectable color temperature switch located on the junction box of each luminaire with a quick connect that allows for easy disconnect and mounting in the ceiling. Features No housing required and includes pre-wired junction box Quick disconnect allows for easy installation Junction box includes color temperature switch IC Airtight rated cETLus Listed for Wet locations Certified to the high efficacy requirements of California Title 24 JA8-2025 Input Voltage: 120V or 120-277V Lumens / Wattage: 1100lm / 13.5W Color Temperature: Field Selectable CCT Switch (2700K / 3000K / 3500K / 4000K / 5000K) Color Rendering Index: 90+ CRI Dimming: Phase (Triac/ELV) or 0-10V Finish: White Accessories: NF-R246: Universal New Construction Frame-In NFP-R613: New Construction Plate NQZ-6R-F: New Construction Frame-In with Collar NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NEFLINTW-R6MPW](https://noralighting.com/product/neflintw-r6mpw/) - FLIN is a thin recessed LED designed for easy installation into new construction or remodel applications. Luminaires include a selectable CCT switch located on the junction box of each luminaire with a quick connect that allows for easy disconnect and mounting in the ceiling. Features No housing required and includes pre-wired junction box Quick disconnect allows for easy installation Junction box includes tunable color temperature switch IC Airtight rated cETLus Listed for Wet locations Certified to the high efficacy requirements of California Title 24 JA8-2025 Input Voltage: 120V or 120-277V Lumens / Wattage: 1300lm / 13.5W Color Temperature: Field Selectable CCT Switch (2700K / 3000K / 3500K / 4000K / 5000K) Color Rendering Index: 90+ CRI Dimming: Phase (Triac/ELV) Finish: White Accessories: NF-R246: Universal New Construction Frame-In NQZ-6R-F: New Construction Frame-In with Collar NEFLINTW-EW-4: 4' Quick Connect Extension Cable NEFLINTW-EW-20: 20' Quick Connect Extension Cable NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NEFLINTW-S4MPW](https://noralighting.com/product/neflintw-s4mpw/) - FLIN is a thin recessed LED designed for easy installation into new construction or remodel applications. Luminaires include a selectable CCT switch located on the junction box of each luminaire with a quick connect that allows for easy disconnect and mounting in the ceiling. Features No housing required and includes pre-wired junction box Quick disconnect allows for easy installation Junction box includes tunable color temperature switch IC Airtight rated cETLus Listed for Wet locations Certified to the high efficacy requirements of California Title 24 JA8-2025 Input Voltage: 120V or 120-277V Lumens / Wattage: Up to 675lm / 10.5W Color Temperature: Field Selectable CCT Switch (2700K / 3000K / 3500K) Color Rendering Index: 90+ CRI Dimming: Phase (Triac/ELV) Finish: White Accessories: NFP-S425: New Construction Frame-In NEFLINTW-EW-4: 4' Quick Connect Extension Cable NEFLINTW-EW-20: 20' Quick Connect Extension Cable NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NEFLINTW-S6MPW](https://noralighting.com/product/neflintw-s6mpw/) - FLIN is a thin recessed LED designed for easy installation into new construction or remodel applications. Luminaires include a selectable CCT switch located on the junction box of each luminaire with a quick connect that allows for easy disconnect and mounting in the ceiling. Features No housing required and includes pre-wired junction box Quick disconnect allows for easy installation Junction box includes tunable color temperature switch IC Air-Tight rated cETLus Listed for Wet locations Certified to the high efficacy requirements of California Title 24 JA8-2025 Input Voltage: 120V or 120-277V Lumens / Wattage: 1200lm / 13.5W Color Temperature: Field Selectable CCT Switch (2700K / 3000K / 3500K / 4000K / 5000K) Color Rendering Index: 90+ CRI Dimming: Phase (Triac/ELV) Finish: White Accessories: NFP-S625: New Construction Plate NEFLINTW-EW-4: 4' Quick Connect Extension Cable NEFLINTW-EW-20: 20' Quick Connect Extension Cable NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NEFLINTW-S6233](https://noralighting.com/product/neflintw-s6233/) - FLIN is a thin recessed LED designed for easy installation into new construction or remodel applications. Luminaires include a selectable CCT switch located on the junction box of each luminaire with a quick connect that allows for easy disconnect and mounting in the ceiling. Features No housing required and includes pre-wired junction box Quick disconnect allows for easy installation Junction box includes tunable color temperature switch IC Airtight rated cETLus Listed for Wet locations Certified to the high efficacy requirements of California Title 24 JA8-2025 Input Voltage: 120V or 120-277V Lumens / Wattage: Up to 1150lm / 13.5W Color Temperature: Field Selectable CCT Switch (2700K / 3000K / 3500K) Color Rendering Index: 90+ CRI Dimming: Phase (Triac/ELV) Finish: White Accessories: NFP-S625: New Construction Plate NEFLINTW-EW-4: 4' Quick Connect Extension Cable NEFLINTW-EW-20: 20' Quick Connect Extension Cable NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NEFLINTW-R4MPW](https://noralighting.com/product/neflintw-r4mpw/) - FLIN is a thin recessed LED designed for easy installation into new construction or remodel applications. Luminaires include a selectable CCT switch located on the junction box of each luminaire with a quick connect that allows for easy disconnect and mounting in the ceiling. Features No housing required and includes pre-wired junction box Quick disconnect allows for easy installation Junction box includes tunable color temperature switch IC Airtight rated cETLus Listed for Wet locations Certified to the high efficacy requirements of California Title 24 JA8-2025 Input Voltage: 120V or 120-277V Lumens / Wattage: 950lm / 10.5W Color Temperature: Field Selectable CCT Switch (2700K / 3000K / 3500K / 4000K / 5000K) Color Rendering Index: 90+ CRI Dimming: Phase (Triac/ELV) Finish: White Accessories: NF-R246: Universal New Construction Frame-In NFC-R430: New Construction Frame-In with Collar NEFLINTW-4OR-MPW: Oversize Ring for holes up to 5.25" NEFLINTW-EW-4: 4' Quick Connect Extension Cable NEFLINTW-EW-20: 20' Quick Connect Extension Cable NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NFLAT-R4TW](https://noralighting.com/product/nflat-r4tw/) - 4" Flat wafer can-less LED downlights feature a non-metallic trim for corrosive environments. Can-less downlights are easy to install in new construction or remodel applications. Each luminaire includes a selectable CCT switch located on the junction box with a quick connect that allows for easy disconnect and mounting in the ceiling. Features Only 3/8" height Dead front (non-metallic) trim for corrosive environments No housing required and includes pre-wired junction box Quick disconnect allows for easy installation Junction box includes color temperature switch IC Airtight rated cETLus Listed for Wet locations Certified to the high efficacy requirements of California Title 24 JA8-2025 Input Voltage: 120V or 120-277V Dimming: Phase (Triac / ELV) or 0-10V Lumens / Wattage: 700lm / 10W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Color Rendering Index: 90+ CRI Finish: Black or White Accessories: NF-R246: Universal New Construction Frame-In NFC-R430: New Construction Frame-In with Collar NFP-R413: New Construction Plate NEFLINTW-4OR-MPW: Oversize Ring up to 5-1/4" NEFLINTW-EW-4: 4' Quick Connect Extension Cable NEFLINTW-EW-20: 20' Quick Connect Extension Cable NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NFLAT-R6TW](https://noralighting.com/product/nflat-r6tw/) - 6" Flat wafer can-less LED downlights feature a non-metallic trim for corrosive environments. Can-less downlights are easy to install in new construction or remodel applications. Each luminaire includes a selectable CCT switch located on the junction box with a quick connect that allows for easy disconnect and mounting in the ceiling. Features Only 3/8" height Dead front (non-metallic) trim for corrosive environments No housing required and includes pre-wired junction box Quick disconnect allows for easy installation Junction box includes color temperature switch IC Airtight rated cETLus Listed for Wet locations Certified to the high efficacy requirements of California Title 24 JA8-2025 Input Voltage: 120V or 120-277V Dimming: Phase (Triac / ELV) or 0-10V Lumens / Wattage: 1050lm / 13.5W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Color Rendering Index: 90+ CRI Finish: Black or White Accessories: NF-R246: Universal New Construction Frame-In NQZ-6R-F: New Construction Frame-In with Collar NFP-R613: New Construction Plate NEFLINTW-6OR-MPW: Oversize Ring up to 7-1/4" NEFLINTW-EW-4: 4' Quick Connect Extension Cable NEFLINTW-EW-20: 20' Quick Connect Extension Cable NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NCSC-R4D1TW](https://noralighting.com/product/ncsc-r4d1tw/) - Contractor Series: 4" Can-less LED recessed downlights are designed for easy installation into new construction or remodel applications. Each downlight includes a Selectable CCT switch located on the junction box. The deep reflector provides excellent glare control, quality of light, and efficiency. Luminaires are sold in bulk packs (Pack of 12). Input Voltage: 120VAC Rating: IC Airtight Lumens / Wattage: Up to 850lm / 10W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Dimming: Triac or ELV Finish: Matte Powder White Listing: cETLus Listed for Wet Locations Warranty: Five Years Accessories: NEFLINTW-EW-4: 4' Quick Connect Extension Cable NEFLINTW-EW-20: 20' Quick Connect Extension Cable NF-R246: New Construction Frame-In NFC-R430: New Construction Frame-In with Collar NEPK-20LEDUNV-JB: 20W Emergency LED Driver Kit with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NCSC-R6D1TW](https://noralighting.com/product/ncsc-r6d1tw/) - Contractor Series: 6" Can-less LED recessed downlights are designed for easy installation into new construction or remodel applications. Each downlight includes a Selectable CCT switch located on the junction box. The deep reflector provides excellent glare control, high light quality, and efficiency. Luminaires are sold in bulk packs (Pack of 12). Input Voltage: 120VAC Rating: IC Airtight Lumens / Wattage: Up to 1050lm / 12W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Dimming: Triac or ELV Finish: White Listing: cETLus Listed for Wet Locations Warranty: Five Years Accessories: NEFLINTW-EW-4: 4' Quick Connect Extension Cable NEFLINTW-EW-20: 20' Quick Connect Extension Cable NFC-R55: New Construction Frame-In with Collar NEPK-20LEDUNV-JB: 20W Emergency LED Driver Kit with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NCSC-R4W2TW](https://noralighting.com/product/ncsc-r4w2tw/) - Contractor Series: 4" Can-less LED recessed downlights are designed for easy installation into new construction or remodel applications. Each downlight includes a Selectable CCT switch located on the junction box. The slim wafer design makes the fixtures ideal for shallow plenums with a regressed baffle trim appearance. Luminaires are sold in bulk packs (Pack of 12). Input Voltage: 120VAC Rating: IC Airtight Lumens / Wattage: Up to 750lm / 10W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Dimming: Triac or ELV Finish: White Listing: cETLus Listed for Wet Locations Warranty: Five Years Accessories: NEFLINTW-EW-4: 4' Quick Connect Extension Cable NEFLINTW-EW-20: 20' Quick Connect Extension Cable NEFLINTW-4OR-MPW: Oversize ring covers holes up to 5.25" NF-R246: New Construction Frame-In NFC-R430: New Construction Frame-In with Collar NEPK-20LEDUNV-JB: 20W Emergency LED Driver Kit with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NCSC-R6W2TW](https://noralighting.com/product/ncsc-r6w2tw/) - Contractor Series: 6" Can-less LED recessed downlights are designed for easy installation into new construction or remodel applications. Each downlight includes a Selectable CCT switch located on the junction box. The slim wafer design makes the fixtures ideal for shallow plenums with a regressed baffle trim appearance. Luminaires are sold in bulk packs (Pack of 12). Input Voltage: 120VAC Rating: IC Airtight Lumens / Wattage: Up to 1050lm / 13.5W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Dimming: Triac or ELV Finish: White Listing: cETLus Listed for Wet Locations Warranty: Five Years Accessories: NEFLINTW-EW-4: 4' Quick Connect Extension Cable NEFLINTW-EW-20: 20' Quick Connect Extension Cable NEFLINTW-6OR-MPW: Oversize ring covers holes up to 7.25" NF-R246: New Construction Frame-In NQZ-6R-F: New Construction Frame-In with Collar NEPK-20LEDUNV-JB: 20W Emergency LED Driver Kit with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NEPK-23LEDUNV](https://noralighting.com/product/nepk-23ledunv/) - Emergency LED driver for use with new or existing LED luminaires. Driver’s circuitry automatically switches the luminaire between emergency and normal power operation during power loss and restoration. Operates for a minimum of 90 minutes to allow safe egress during power outage. Upon restoration to normal AC operation, the emergency driver returns to charging mode. FEATURES Listed for field installation - UL 924 and CSA C2.22 No 141 Controlled power for predictable discharge Includes wall plate with test switch Input Voltage: 120-277VAC Output Voltage: 120VAC (during emergency operation) Output Wattage: 23W Accessories: NEPKA-20/23LEDRTS: Ribbon Test Switch replaces the Remote Test Switch NEPKA-20LEDFPTS: Replacement Remote Test Switch Compatible Luminaires: NCSC: 4" & 6" Contractor Series Can-less Downlights NCSD: 6" Contractor Series Disk Lights NCSR: 4" & 6" Contractor Series Retrofits NEFLINTW: 4" & 6" FLIN Can-less Regressed Baffle Downlights NELOCAC-16R: 16" ELO Surface Mount NELOSW: 4", 6" & 8" ELO Surface Mounts with Selectable Lumens & CCT NFLAT: 4" & 6" FLAT Can-less Non-Metallic Downlights NFLINA: 4" & 6" FLIN Can-less Adjustable Downlights NFRC: 4" & 6″ Fire Rated Can-less Downlights NHSIC-4: 4" Cobalt Shallow Housing NJCB-09: 1" Iolite Can-less Driver Box NJCB-12: 2" & 4" Iolite Can-less Driver Box NLCBC: 4", 5" & 6" Cobalt Adjustable Retrofits NLCBC2: 4", 5" & 6" Cobalt Click Retrofits NLOPAC-R4509T24: 4" Opal Surface Mount NLOPAC-R4REGT24: 4" Regressed AC Opal Surface Mount NLOPAC-R4TW: 4" Opal Surface Mount with Selectable CCT NLOPAC-R6509T24: 6" Opal Surface Mount NLOPAC-R6REGT24: 6" Regressed Opal Surface Mount with Dedicated CCT NLOPAC-R6REGT24TW: 6" Regressed Opal Surface Mount with Selectable CCT NLOPAC-R6TW: 6" Opal Surface Mount with Selectable CCT NLOPAC2-R6509T24: 6" Opal 2 Surface Mount NLOS: 4", 6" & 7" SURF Surface Mounts NLRS: 6" Sloped Retrofits NLTH: 4", 6" & 8" Theia Can-less Downlights NM1-PRDC: 1" M1+ Can-less Downlight NM2: 2" M2 Can-less Downlights NM4: 4" M4 Can-less Downlights NMC: 4" & 6" M-Curve Can-less Adjustable Downlights NMW: 2" & 4" M-Wave Can-less Adjustable Downlights NOXAC-431TW: 4" Onyx Retrofit Reflector with Selectable CCT NOXAC-432TW: 4" Onyx Retrofit Baffle with Selectable CCT NOXAC-4RGTW: 4" Onyx Adjustable Retrofit with Selectable CCT NOXAC-4RWTW: 4" Onyx Round Wall Wash Retrofit with Selectable CCT NOXAC-4SWTW: 4" Onyx Square Wall Wash Retrofit with Selectable CCT NOXAC-5631TW: 5"/6" Onyx Retrofit Reflector with Selectable CCT NOXAC-5632TW: 5"/6" Onyx Retrofit Baffle with Selectable CCT NOXAC-56RGTW: 5"/6" Onyx Adjustable Retrofit with Selectable CCT NPR: 4" & 5"/6" 120V Pearl Retrofits NRMC3: 4", 5" & 6" Marquise Retrofits NSLIM: 4" Slim Surface Mounts NYLD2: 6" Cobalt Click Cylinders - [NEPK-23LEDUNV-JB](https://noralighting.com/product/nepk-23ledunv-jb/) - Emergency LED driver kit for use with new or existing LED luminaires. Driver’s circuitry automatically switches the luminaire between emergency and normal power operation during power loss and restoration. Operates for a minimum of 90 minutes to allow safe egress during a power outage. Upon restoration to normal AC operation, the emergency driver returns to charging mode. FEATURES Listed for field installation - UL 924 and CSA C2.22 No 141 Controlled power for predictable discharge Includes wall plate with test switch Input Voltage: 120-277VAC Output Voltage: 120VAC (during emergency operation) Output Wattage: 23W Accessories: NEPKA-20/23LEDRTS: Ribbon Test Switch replaces the Remote Test Switch NEPKA-20LEDFPTS: Replacement Remote Test Switch Compatible Luminaires: NCSC: 4" & 6" Contractor Series Can-less Downlights NCSD: 6" Contractor Series Disk Lights NCSR: 4" & 6" Contractor Series Retrofits NEFLINTW: 4" & 6" FLIN Can-less Regressed Baffle Downlights NELOCAC-16R: 16" ELO Surface Mount NELOSW: 4", 6" & 8" ELO Surface Mounts with Selectable Lumens & CCT NFLAT: 4" & 6" FLAT Can-less Non-Metallic Downlights NFLINA: 4" & 6" FLIN Can-less Adjustable Downlights NFRC: 4" & 6″ Fire Rated Can-less Downlights NHSIC-4: 4" Cobalt Shallow Housing NJCB-09: 1" Iolite Can-less Driver Box NJCB-12: 2" & 4" Iolite Can-less Driver Box NLCBC: 4", 5" & 6" Cobalt Adjustable Retrofits NLCBC2: 4", 5" & 6" Cobalt Click Retrofits NLOPAC-R4509T24: 4" Opal Surface Mount NLOPAC-R4REGT24: 4" Regressed AC Opal Surface Mount NLOPAC-R4TW: 4" Opal Surface Mount with Selectable CCT NLOPAC-R6509T24: 6" Opal Surface Mount NLOPAC-R6REGT24: 6" Regressed Opal Surface Mount with Dedicated CCT NLOPAC-R6REGT24TW: 6" Regressed Opal Surface Mount with Selectable CCT NLOPAC-R6TW: 6" Opal Surface Mount with Selectable CCT NLOPAC2-R6509T24: 6" Opal 2 Surface Mount NLOS: 4", 6" & 7" SURF Surface Mounts NLRS: 6" Sloped Retrofits NLTH: 4", 6" & 8" Theia Can-less Downlights NM1-PRDC: 1" M1+ Can-less Downlight NM2: 2" M2 Can-less Downlights NM4: 4" M4 Can-less Downlights NMC: 4" & 6" M-Curve Can-less Adjustable Downlights NMW: 2" & 4" M-Wave Can-less Adjustable Downlights NOXAC-431TW: 4" Onyx Retrofit Reflector with Selectable CCT NOXAC-432TW: 4" Onyx Retrofit Baffle with Selectable CCT NOXAC-4RGTW: 4" Onyx Adjustable Retrofit with Selectable CCT NOXAC-4RWTW: 4" Onyx Round Wall Wash Retrofit with Selectable CCT NOXAC-4SWTW: 4" Onyx Square Wall Wash Retrofit with Selectable CCT NOXAC-5631TW: 5"/6" Onyx Retrofit Reflector with Selectable CCT NOXAC-5632TW: 5"/6" Onyx Retrofit Baffle with Selectable CCT NOXAC-56RGTW: 5"/6" Onyx Adjustable Retrofit with Selectable CCT NPR: 4" & 5"/6" 120V Pearl Retrofits NRMC3: 4", 5" & 6" Marquise Retrofits NSLIM: 4" Slim Surface Mounts NYLD2: 6" Cobalt Click Cylinders - [NEPK-07LEDUNV](https://noralighting.com/product/nepk-07ledunv/) - Emergency LED driver for use with new or existing LED luminaires. Driver’s circuitry automatically switches the luminaire between emergency and normal power operation during power loss and restoration. Operates at a reduced level for a minimum of 90 minutes to allow safe egress during power outage. Upon restoration to normal AC operation, the emergency driver returns to charging mode. FEATURES Listed for field installation - UL 924 and CSA C2.22 No 141 Class 2 output - UL 1310 certified, CSA 22.2 No 223-M91 Controlled power for predictable discharge 10 - 60VDC for wide range of LED loads Universal input (120 through 277VAC, 50/60Hz) Includes wall plate with test switch Certified to the energy efficiency standards of California Title 20 Accessory: NEPKA-07LEDFPTS: Replacement Remote Test Switch - [NEPK-20LEDUNV-JB](https://noralighting.com/product/nepk-20ledunv-jb/) - Emergency LED driver kit for use with new or existing LED luminaires. The driver’s circuitry automatically switches the luminaire between emergency and normal power operation during power loss and restoration. Operates at a reduced level for a minimum of 90 minutes to allow safe egress during power outage. Upon restoration to normal AC operation, the emergency driver returns to charging mode. Separated feed and luminarie connections. Great for canless applications and drivers with small enclosures. FEATURES Listed for field installation - UL 924 and CSA C2.22 No 141 Controlled power for predictable discharge Includes wall plate with test switch Input Voltage: 100-347VAC Output Voltage: 170VDC Output Wattage: 20W Compatible Luminaires: NPTCBSW-22: 2'x2' LED Troffer with Selectable Lumens & CCT NPTCBSW-24: 2'x4' LED Troffer with Selectable Lumens & CCT Accessories: NEPKA-20/23LEDRTS: Ribbon Test Switch replaces the Remote Test Switch NEPKA-20LEDFPTS: Replacement Remote Test Switch - [NEPK-20LEDUNV](https://noralighting.com/product/nepk-20ledunv/) - Emergency LED driver for use with new or existing LED luminaires. Driver’s circuitry automatically switches the luminaire between emergency and normal power operation during power loss and restoration. Operates at a reduced level for a minimum of 90 minutes to allow safe egress during power outage. Upon restoration to normal AC operation, the emergency driver returns to charging mode. FEATURES Listed for field installation - UL 924 and CSA C2.22 No 141 Controlled power for predictable discharge Includes wall plate with test switch Input Voltage: 100-347VAC Output Voltage: 170VDC Output Wattage: 20W Compatible Luminaires: NCSC-R4D1TW: 4" Contractor Series Can-less Deep Downlight NCSC-R4W2TW: 4" Contractor Series Can-less Wafer Downlight NCSC-R6D1TW: 6" Contractor Series Can-less Deep Downlight NCSC-R6W2TW: 6" Contractor Series Can-less Wafer Downlight NLIN: L-Line LED Direct Linear NLINSW: L-Line LED Direct Linear with Selectable CCT NPTPSW-E22: 2'x2' Frame Light NPTPSW-E24: 2'x4' Frame Light NQZ2-41TWTW-MPW: 4" Quartz Round Can-less Downlight NQZ2-61TWTW-MPW: 6" Quartz Round Can-less Downlight NQZ2-66TWTW-MPW: 6" Quartz Square Can-less Downlight NQZ2-81TWTW-MPW: 8" Quartz Round Can-less Downlight NQZ2-86TWTW-MPW: 6" Quartz Square Can-less Downlight NRLIN: L-Line Recessed LED Linear NRLM-8: 8" RLM LED Shade NRLM-10: 10" RLM LED Shade NRLM-16: 16" RLM LED Shade NYUD-3: 3" Up & Down Wall Mounted Cylinder Accessories: NEPKA-20/23LEDRTS: Ribbon Test Switch replaces the Remote Test Switch NEPKA-20LEDFPTS: Replacement Remote Test Switch - [NELOSW-6RTW](https://noralighting.com/product/nelosw-6rtw/) - 6" ELO LED luminaires are thin 5/8" surface-mounted luminaires with two tunable switches; Selectable Lumens allows the end user to determine the wattage input & Selectable CCT changes the color temperature appearance. Luminaires are available in 4", 6", or 8" sizes and mount easily over standard or fire-rated junction boxes. Features Three Selectable lumens in each fixture (950lm / 1250lm / 1550lm) Five color temperatures in each fixture (2700K / 3000K / 3500K / 4000K / 5000K) Available in three sizes (4", 6" or 8") cETLus Listed for Wet Locations 5-year limited warranty Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Input Voltage: 120-277VAC Lumens / Wattage: Selectable Lumens (950lm / 8W; 1250lm / 11W; 1550lm / 15W) Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Dimming: 0-10V Color Rendering Index: 90+ CRI Finish: White Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NELOSW-8RTW](https://noralighting.com/product/nelosw-8rtw/) - 8" ELO LED luminaires are thin 5/8" surface-mounted luminaires with two tunable switches; Selectable Lumens allows the end user to determine the wattage input & Selectable CCT changes the color temperature appearance. Luminaires are available in 4", 6", or 8" sizes and mount easily over standard or fire-rated junction boxes. Features Three Selectable lumens in each fixture (1050lm / 1350lm / 1550lm) Five color temperatures in each fixture (2700K / 3000K / 3500K / 4000K / 5000K) Available in three sizes (4", 6" or 8") cETLus Listed for Wet Locations 5-year limited warranty Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Input Voltage: 120-277VAC Lumens / Wattage: Selectable Lumens (1050lm / 10W; 1350lm / 13W; 1550lm / 16W) Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Dimming: 0-10V Color Rendering Index: 90+ CRI Finish: White Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NELOSW-4RTW](https://noralighting.com/product/nelosw-4rtw/) - 4" ELO LED luminaires are thin 5/8" surface-mounted luminaires with two tunable switches; Selectable Lumens allows the end user to determine the wattage input & Selectable CCT changes the color temperature appearance. Luminaires are available in 4", 6", or 8" sizes and mount easily over standard or fire-rated junction boxes. Features Three Selectable lumens in each fixture (700lm / 900lm / 1150lm) Five color temperatures in each fixture (2700K / 3000K / 3500K / 4000K / 5000K) Available in three sizes (4", 6" or 8") cETLus Listed for Wet Locations 5-year limited warranty Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Input Voltage: 120-277VAC Lumens / Wattage: Selectable Lumens (700lm / 7W; 900lm / 9W; 1150lm / 13W) Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Dimming: 0-10V Color Rendering Index: 90+ CRI Finish: White Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NELOCAC-16R](https://noralighting.com/product/nelocac-16r/) - 16" ELO LED Surface Mount is a thin 1" luminaire that mounts easily over a standard or fire rated junction boxes. Luminaire can also be suspended with accessories. Features Dedicated color temperatures (2700K, 3000K or 4000K) at 90+ CRI Surface mounted or suspended with accessories (ordered separately) 120-277V input Dimmable with Triac or ELV dimmers cETLus Listed for Damp Location 5-year limited warranty Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Certified to requirements of CA Title 24 JA8-2025 Lumens / Wattage: 2100lm / 20W Color Temperature: 2700K, 3000K or 4000K Color Rendering Index: 90+ CRI Finish: Black or White Accessories: NELOCAC-16PK: Pendant Kit for 16" ELO NELOCAC-16ST: Stem Kit for 16" ELO NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch - [NCSD-R6TW](https://noralighting.com/product/ncsd-r6tw/) - Contractor Series: 6" LED flush mount disk lights are designed for installation over junction boxes from below the ceiling. Low-profile luminaires are the perfect solution for closets, storage areas, attics, and basements. Luminaires are sold in bulk packs (Pack of 12). Input Voltage: 120VAC Lumens / Wattage: Up to 1250lm / 16W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Dimming: Triac or ELV Finish: Black or White Optional Accessories: NLOPAC-56RECKIT-2: Retrofit Kit for mounting on 5″ or 6″ recessed housings NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch Listing: cETLus Listed for Wet Locations Warranty: Five Years - [NCSD-R630](https://noralighting.com/product/ncsd-r630/) - Contractor Series: 6" LED flush mount disk lights are designed for installation over junction boxes from below the ceiling. Low-profile luminaires are the perfect solution for closets, storage areas, attics, and basements. Luminaires are sold in bulk packs (Pack of 12). Input Voltage: 120VAC Lumens / Wattage: Up to 1200lm / 16W Color Temperature: Dedicated 3000K Dimming: Triac or ELV Finish: Black or White Optional Accessories: NLOPAC-56RECKIT-2: Retrofit Kit for mounting on 5″ or 6″ recessed housings NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit with Remote Test Switch Listing: cETLus Listed for Wet Locations Warranty: Five Years - [NEPKA-20LEDFPTS](https://noralighting.com/product/nepka-20ledfpts/) - Replacement face plate and test switch for remote emergency LED drivers Compatible Emergency Drivers: NEPK-20LEDUNV: 20W Emergency LED Driver NEPK-20LEDUNV-JB: 20W Emergency LED Driver Kit NEPK-23LEDUNV: 23W Emergency LED Driver NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit - [NEPKA-20-23LEDRTS](https://noralighting.com/product/nepka-20-23ledrts/) - Ribbon test switch replaces the remote test switch included with emergency LED drivers. FEATURES Pre-installed double-sided tape Can be installed on luminaire Only 1.5 inches wide Compatible Emergency LED Drivers: NEPK-20LEDUNV: 20W Emergency LED Driver NEPK-20LEDUNV-JB: 20W Emergency LED Driver Kit NEPK-23LEDUNV: 23W Emergency LED Driver NEPK-23LEDUNV-JB: 23W Emergency LED Driver Kit - [NFJB-R4](https://noralighting.com/product/nfjb-r4/) - Dedicated new construction housing for use in insulated ceilings can be in direct contact with insulation. Powder-coated steel housing meets a 2-hour fire rating per the International Building Code section 714 for 1-hour and 2-hour fire-rated assemblies. Air-tight construction provides energy savings by reducing the flow of air through the ceiling. The housing is labeled for use with LED downlights or as an outlet box. Input Voltage: 120/277VAC Socket: Quick connect for LED downlights Wattage: 12W max. Clearance: IC Air-Tight Compatible Downlights: NLCBC2-451TW: 4" Cobalt Click Round Reflector with Selectable CCT NLCBC2-452TW: 4" Cobalt Click Round Baffle with Selectable CCT NLCBC2-456TW: 4" Cobalt Click Square Reflector with Selectable CCT NOXAC-431: 4" AC Onyx Round Reflector with Dedicated CCT (700lm only) NOXAC-431TW: 4" AC Onyx Round Reflector with Selectable CCT NOXAC-432: 4" AC Onyx Round Baffle with Dedicated CCT (700lm only) NOXAC-432TW: 4" AC Onyx Round Baffle with Selectable CCT NOXAC-4RGTW: 4" AC Onyx Round Adjustable with Selectable CCT NOXAC-4RWTW: 4" AC Onyx Round Wall Wash with Selectable CCT NOXAC-4SWTW: 4" AC Onyx Square Wall Wash with Selectable CCT NPR-4RC: 4" Pearl Round Adjustable Cone with Field Adjustable Optics NPR-4RG: 4" Pearl Round Adjustable Gimbal with Field Adjustable Optics NPR-4RNB: 4" Pearl Round Bullnose with Field Adjustable Optics NPR-4SC: 4" Pearl Square Adjustable Cone with Field Adjustable Optics NPR-4SG: 4" Pearl Square Adjustable Gimbal with Field Adjustable Optics NPR-4SNB: 4" Pearl Square Bullnose with Field Adjustable Optics NSLIM-4RL1TWMPW: 4" Slim Surface Mount with Selectable CCT - [NLCBC2-456](https://noralighting.com/product/nlcbc2-456/) - The 4" Cobalt Click LED retrofit series is cULus classified for use in existing IC or non-IC housings manufactured by Nora and others. The patented "Click" system allows the aluminum spun trim to be easily changed in the field, and spring mounting clips properly secure it to the LED module. Features Available with Phase (120V) or 0-10V (120-277V) dimming Includes a medium base socket for easy retrofitting Dedicated CCT, Selectable CCT, or Comfort Dim (warm dim) Emergency wiring option 5-year limited warranty cULus classified for Wet Locations Certified to the high efficacy requirements of California Title 24 JA8-2025 Patented, see noralighting.com/patents Input Voltage: 120V or 120-277V Lumens: 750lm to 1000lm Color Temperature: Dedicated CCT (2700K, 3000K, 3500K, 4000K) Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Comfort Dim (3000K to 2000K) Dimming: Triac/ELV or 0-10V Compatible Housings: NFBIC-4LMRATA = Fire Rated LED Housing NFBIC-4INCATA = Fire Rated Line Voltage Housing NFJB-R4 = Fire Rated IC Air-Tight Junction Box Housing (NLCBC2-456TW only) NHIC-4LMRAT = IC Air-Tight LED Housing NHICCP-4LMRAT = CCEA LED Housing NSIC-401QAT = IC Air-Tight Line Voltage Housing NS-401QAT = Non-IC Air-Tight Line Voltage Housing NHIC-4G24AT = IC Air-Tight GU24 Housing NHRIC-4LMRAT = IC Air-Tight LED Remodel Housing NSRIC-404QAT = IC Air-Tight Line Voltage Housing NSR-404QAT = Non-IC Air-Tight Line Voltage Housing - [NE-970](https://noralighting.com/product/ne-970/) - Wet location rated LED emergency luminaire with two adjustable heads. Luminaire is powered by LED sources for maximum life without maintenance. In the event of power loss, LED heads will operate for a minimum of 90 minutes. Ideal for egress lighting where splashing, non-corrosive liquids and dripping may occur. FEATURES Fully adjustable 2.5W LED emergency heads Wall Mounted UL Listed and meets or exceeds UL 924, NFPA 70 and NFPA 101 Life Safety Code requirements Polycarbonate plastic enclosure with flame retardant and wet location rated Self Diagnostic Testing Push-To-Test Switch High temperature maintenance free NiCad battery 120-277V AC input FACE Impact resistant polycarbonate white face plate with flame retardant and internal gasket for wet location rating. MOUNTING Mounting hardware included for wall mount applications. Listed for installations indoor, outdoor or wet locations. LABELS AND LISTINGS UL 924 Listed for Wet Locations NFPA 70 & NFPA 101 Life Safety Code Certified to the energy efficiency standards of California Title 20 - [NQZ2-41TWTW](https://noralighting.com/product/nqz2-41twtw/) - 4" Quartz luminaires are architectural and commercial-grade LED high-lumen downlights. Each luminaire includes two tunable switches: Selectable Lumens allows the end user to determine the wattage input, and Selectable CCT allows changing the color temperature appearance. Downlights include two tension steel spring clips, which allow the luminaires to be installed without any frame-in or housing for easy installation. FEATURES Can-less installation (No frame-in or housing required) Easy installation for retrofit, remodel, or new construction applications Selectable Lumen switch allows for selectable lumen outputs from 800lm to 1250lm Selectable CCT switch allows for selectable kelvin temperatures from 3000K / 3500K / 4000K Field changeable reflector allows for easy customization Optional emergency backup 5-year limited warranty ENERGY STAR certified Certified to the high efficacy requirements of California Title 24 JA8-2025 cETLus Listed for Wet Locations Input Voltage: 120-277VAC Rating: IC Lumens / Wattage: Selectable Lumens (800lm / 7W; 950lm / 9W; 1250lm / 12W) Color Temperature: Selectable CCT (3000K / 3500K / 4000K) Dimming: 0-10V Finish: White Listing: cETLus Listed for Wet Locations Warranty: Five Years Accessories: NQZ2-4R-F: New Construction Frame-In with Junction Box and Collar NQZ-41REFL: Reflector Insert (Specular Clear, Diffused or Haze) NEPK-20LEDUNV: 20W Remote Emergency Driver - [NIOC-4RSLA](https://noralighting.com/product/nioc-4rsla/) - 4" Deep regressed cone reflectors optimize visual cut-off and adjust up to 32°. Iolite can-less trims require a compatible LED module and driver box. Compatible LED module: NIOC-24LED Compatible Driver Box: NJCB-12 Finishes: Haze Reflector / Bright White Flange or Bright White Reflector / Bright White Flange Finishes: BB: Black Reflector / Black Flange MPW: Bright White Reflector / Bright White Flange WW: Warm White Reflector / Warm White Flange Accessories: NIO-AS: Translucent/Opaque Deco Collars NIO-HC: Hex Louver NF-R124: Universal New Construction Frame-In NFC-R413: New Construction Frame-In with Collar - [NIOC-4SNDSQ](https://noralighting.com/product/nioc-4sndsq/) - 4" Square deep regressed cone reflectors optimize visual cut-off. Iolite can-less trims require a compatible LED module and driver box. Compatible LED module: NIOC-24LED Compatible Driver Box: NJCB-12 Finishes: BB: Black Reflector / Black Flange HW: Haze Reflector / Warm White Flange MPW: Bright White Reflector / Bright White Flange WW: Warm White Reflector / Warm White Flange Accessories: NIO-AS: Translucent/Opaque Deco Collars NIO-HC: Hex Louver NF-R124: Universal New Construction Frame-In NFC-R413: New Construction Frame-In with Collar - [NIOC-4RNB](https://noralighting.com/product/nioc-4rnb/) - 4" Bullnose trim with a filleted aperture which allows for minimal aperture brightness while still producing the nadir footcandles. Iolite can-less trims require a compatible LED module and driver box. Compatible LED module: NIOC-24LED Compatible Driver Box: NJCB-12 Finishes: BB: Black MPW: Bright White WW: Warm White Accessories: NIO-AS: Translucent/Opaque Deco Collars NIO-HC: Hex Louver NF-R124: Universal New Construction Frame-In NFC-R413: New Construction Frame-In with Collar - [NIOC-2SNDSQ](https://noralighting.com/product/nioc-2sndsq/) - 2" Square deep regressed cone reflectors optimize visual cut-off. Iolite can-less trims require a compatible LED module and driver box. Compatible LED Module: NIOC-24LED Compatible Driver Box: NJCB-12 Finishes: BB: Black Reflector / Black Flange HW: Haze Reflector / Warm White Flange MPW: Bright White Reflector / Bright White Flange Accessories: NF-R124: Universal New Construction Frame-In NFC-R313: New Construction Frame-In with Collar NIO-AS: Translucent/Opaque Deco Collars NIO-HC: Hex Louver - [NIOC-2RNB](https://noralighting.com/product/nioc-2rnb/) - 2" Bullnose trim with a filleted aperture which allows for minimal aperture brightness while still producing the nadir footcandles. Iolite can-less trims require a compatible LED module and driver box. Compatible LED module: NIOC-24LED Compatible Driver Box: NJCB-12 Finishes: BB: Black MPW: Bright White WW: Warm White Accessories: NF-R124: Universal New Construction Frame-In NFC-R313: New Construction Frame-In with Collar NIO-AS: Translucent/Opaque Deco Collars NIO-HC: Hex Louver - [NIOC-1RNB](https://noralighting.com/product/nioc-1rnb/) - 1" Bullnose trim with a filleted aperture which allows for minimal aperture brightness while still producing the nadir footcandles. Iolite can-less trims require a compatible LED module and driver box. Compatible LED module: NIOC-1LED Compatible Driver Box: NJCB-09 Finishes: BB: Black MPW: Bright White WW: Warm White Accessories: NIO-1AS: Translucent/Opaque Deco Collars NIO-1HC: Hex Louver NF-R124: Universal New Construction Frame-In NFC-R231: New Construction Frame-In with Collar - [NT-301](https://noralighting.com/product/nt-301/) - Nora Lighting's one circuit track system with miniature size and push in connector provides versatility for every lighting application. The system is designed and engineered for safety and easy installation. SPECIFICATIONS: Miniature extruded aluminum channel Push-in connectors Solid, 12-gauge copper conductors in PVC insulators Separate, full-length ground conductor Compatible with most common 3-wire systems Visual polarity groove indicates proper electrical installation Size is only 11/16" high X 1-7/16" wide Can be field-cut to the desired length Length: 24.25in Input Voltage: 120V Maximum Wattage: 2400W Finish: Black, Silver, or White Included: End Caps and Mounting Hardware - [NT-302](https://noralighting.com/product/nt-302/) - Nora Lighting's one circuit track system with miniature size and push in connector provides versatility for every lighting application. The system is designed and engineered for safety and easy installation. SPECIFICATIONS: Miniature extruded aluminum channel Push-in connectors Solid, 12-gauge copper conductors in PVC insulators Separate, full-length ground conductor Compatible with most common 3-wire systems Visual polarity groove indicates proper electrical installation Size is only 11/16" high X 1-7/16" wide Can be field-cut to the desired length Length: 48.25in Input Voltage: 120V Maximum Wattage: 2400W Finish: Black, Silver, or White Included: End Caps and Mounting Hardware - [NIO-HC](https://noralighting.com/product/nio-hc/) - Hex cell louver subtlety reduces aperture brightness by reducing light output by about 50%. 2" and 4" Iolite reflectors can accommodate (1) hex louver and (1) collar accessory, no accessory holder required. Compatible Fixtures: NIO-2: 2″ Iolite Dedicated Trimless Downlights NIOB-2: 2″ Iolite Dedicated Flanged Downlights NIOC-2: 2″ Iolite Can-less Trims NIO-4: 4″ Iolite Dedicated Downlights NIOC-4: 4″ Iolite Can-less Trims NPR-4: 4" Pearl 120V Retrofit Downlights NPRLV-4: 4" Pearl 12V Retrofit Downlights NPR-56: 5"/6" Pearl 120V Retrofit Downlights NPRLV-56: 5"/6" Pearl 12V Retrofit Downlights - [NIO-1HC](https://noralighting.com/product/nio-1hc/) - Hex cell louver subtlety reduces aperture brightness by reducing light output by about 50%. 1" Iolite reflectors can accommodate (1) hex louver and (1) collar accessory, no accessory holder required. Compatible Fixtures: NIO-1: 1" Iolite Dedicated NTF Downlights NIOB-1: 1" Iolite Dedicated BWF Downlights NIOC-1: 1" Iolite Can-less Trims - [NE-806LED](https://noralighting.com/product/ne-806led/) - This low profile fixture offers the lowest profile of all Nora Emergency fixtures. The light sources are held within the body of the fixture, with both beveled side panels constructed of clear polycarbonate. These features make the emergency light small enough for virtually any application, and eliminate the necessity of aiming and locking lamp heads. BODY 11-7/8" Width X 5-1/8" Height X 2-3/4" Depth Injection-molded housing with access for ceiling or wall power supply. FACE Injection molded face with two clear polycarbonate covers on beveled surfaces. MOUNTING Wall or ceiling Mounting hardware included Electrical 120/277V input Automatic solid state switching and charging Automatic reset Battery Replaceable 3.6V, 1000mAh NiCad battery for backup operation during power loss 90 minute emergency operation on fully charged battery Testing High-charge/ready operation indicator light Test button Circuitry Protection Short circuit protection Listings UL 924 NFPA 70 & NFPA 101 Suitable for damp location - [NLOPAC-R4T24](https://noralighting.com/product/nlopac-r4t24/) - ** While Supplies Last: Replacement Item: NLOPAC-R4509T24 ** The AC Opal LED Series LED fixture is designed to surface mount over a standard junction box. The low profile dimmable luminaire produces even illumination and is cULus listed for wet locations. T24 series can be used to comply with 2019 Title 24 - part 6 High Efficacy LED light source requirements. Features: 4", 6" and 8" sizes AC LED (No Driver) Dimmable Mount on standard 4" junction box Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 850lm / 13W Color Temperature: 4000K Color Rendering Index: 90+ CRI Finish: Bronze Optional Accessories: NLOPAC-4BKT-2 = Universal Bracket for mounting on 3" or 4" junction boxes - [NPR-56RNDC](https://noralighting.com/product/npr-56rndc/) - 5"/6" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. Retrofit luminaires deliver over 1150 lumens with die-cast downlight. Input Voltage: 120V Socket: Medium base socket adapter included Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1150lm (700lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housings: NFBIC-5LMRATA = 5" Fire Rated LED Housing NFBIC-5INCATA = 5" Fire Rated Line Voltage Housing NHIC-5LMRAT = 5" IC Air-Tight LED Housing NHIC-527LMRAT = 5" Shallow IC Air-Tight LED Housing NHIC-501QAT = 5" IC Air-Tight Line Voltage Housing NHIC-527QAT = 5" Shallow IC Air-Tight Line Voltage Housing NFBIC-6LMRATA = 6" Fire Rated LED Housing NFBIC-6INCATA = 6" Fire Rated Line Voltage Housing NHIC-6LMRAT = 6" IC Air-Tight LED Housing NHIC-27LMRAT = 6" Shallow IC Air-Tight LED Housing NHIC-17QAT = 6" IC Air-Tight Line Voltage Housing NHIC-27QAT = 6" IC Air-Tight Line Voltage Housing NH-26Q = 6" Non-IC Air-Tight Line Voltage Housing NH-27Q = 6" Shallow Non-IC Air-Tight Line Voltage Housing NHIC-6G24ATFL = 6" IC Air-Tight GU24 Housing NHRIC-5LMRAT = 5" IC Air-Tight LED Remodel Housing NHRIC-527LMRAT = 5" Shallow IC Air-Tight LED Remodel Housing NHRIC-504QAT = 5" IC Air-Tight Line Voltage Remodel Housing NHRIC-6LMRAT = 6" IC Air-Tight LED Remodel Housing NHRIC-27LMRAT = 6" Shallow IC Air-Tight LED Remodel Housing NHRIC-17QAT = 6" IC Air-Tight Line Voltage Remodel Housing NHRIC-27QAT = 6" IC Air-Tight Line Voltage Remodel Housing NHR-26Q = 6" Non-IC Air-Tight Line Voltage Remodel Housing NHR-27Q = 6" Shallow Non-IC Air-Tight Line Voltage Remodel Housing Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch  - [NT-5014](https://noralighting.com/product/nt-5014/) - 5" Air-Tight Cone Reflector with Metal Ring rated up to 75W max. Compatible Housings: NHIC-501QAT: IC Air-Tight New Construction (Rated up to 75W) NHRIC-504QAT: IC Air-Tight Remodel (Rated up to 75W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NSW-720](https://noralighting.com/product/nsw-720/) - An energy efficient LED step light with a sleek modern appearance. This sophisticated die-cast aluminum series features a screwless face plate with an inward sloping reflector that delivers a bright, discreet beam of light while obscuring the source. Interchangeable face plate allows for one fixture to be modified in the field for horizontal or vertical orientation. Long lasting, energy efficient Ari LED step lights provide excellent safety or accent illumination around steps, balcony areas, and walkways. Lumens / Wattage: 47lm / 2.5W (Dedicated CCT) or 85lm / 3W (Selectable CCT) Color Temperature: Dedicated CCT: 3000K or 4000K Selectable CCT: 2700K / 3000K / 3500K / 4000K / 5000K Color Rendering Index: 90+ CRI Finishes: Black, Brushed Nickel, Bronze, Deep Bronze or White - [NSW-740](https://noralighting.com/product/nsw-740/) - An energy efficient LED step light with a sleek modern appearance. This sophisticated die-cast aluminum series features a screwless face plate with an inward sloping reflector that delivers a bright, discreet beam of light while obscuring the source. Long lasting, energy efficient Ari LED step lights provide excellent safety or accent illumination around steps, balcony areas, and walkways. Lumens / Wattage: 86lm / 5W (Dedicated CCT) or 105lm / 3W (Selectable CCT) Color Temperature: Dedicated CCT: 3000K or 4000K Selectable CCT: 2700K / 3000K / 3500K / 4000K / 5000K Color Rendering Index: 90+ CRI Finishes: Black, Bronze, Brushed Nickel, Deep Bronze or White - [NSW-730](https://noralighting.com/product/nsw-730/) - An energy efficient LED step light with a sleek modern appearance. This sophisticated die-cast aluminum series features a screwless face plate with an inward sloping reflector that delivers a bright, discreet beam of light while obscuring the source. Long lasting, energy efficient Ari LED step lights provide excellent safety or accent illumination around steps, balcony areas, and walkways. Lumens / Wattage: 37lm / 2.5W (Dedicated CCT) or 115lm / 3W (Selectable CCT) Color Temperature: Dedicated CCT: 3000K Selectable CCT: 2700K / 3000K / 3500K / 4000K / 5000K Color Rendering Index: 90+ CRI Finishes: Black, Brushed Nickel, or White - [NHIC-4LMRAT](https://noralighting.com/product/nhic-4lmrat/) - 4" IC Air-Tight Dedicated New Construction housings are designed for use with all 4" Nora Lighting LED retrofit luminares. IC housings are high-quality, lightweight units ideal for use in insulated ceilings. Airtight construction reduces energy costs by reducing the amount of air escaping through the ceiling. Rated for direct contact with insulation (except spray foam insulation) and combustive materials, Nora IC housings are easy and quick to install. Features IC rated for direct contact with insulation Quick connect provided for electrical connection to the LED Trim Airtight in accordance to ASTM E283 cULus Listed for Damp Location (Wet location when used with compatible luminaire) Dimmable 24-1/2″ bar hangers included with captive nails and alignment foot Compatible Luminaires: NIR-4: 4" Iolite Retrofit Downlights NLCBC-469: 4" Cobalt Adjustable Downlight NLCBC2-4: 4" Cobalt Click Downlights NOX-4: 4" Onyx Downlights NOXAC-4: 4" AC Onyx Downlights NOXTW-4: 4" Onyx Tunable White Downlights NPR-4: 4" Pearl Downlights NRMC3-4: 4" Marquise III Retrofit Downlights - [NAPF-3RDN](https://noralighting.com/product/napf-3rdn/) - 3" Apollo Round Flanged Downlight Trim. Available in Black, Bronze, Haze, Matte Powder White and Wheat Diffused - [NAPT-3RWW](https://noralighting.com/product/napt-3rww/) - 3" Apollo Round Flangeless Wall Wash Trim. Available in Black, Bronze, Matte Powder White and Wheat Diffused - [NAPT-3RPH](https://noralighting.com/product/napt-3rph/) - 3" Apollo Round Flangeless Pinhole Trim. Available in Black, Bronze, Matte Powder White and Wheat Diffused - [NAPF-3RWW](https://noralighting.com/product/napf-3rww/) - 3" Apollo Round Flanged Wall Wash Trim. Available in Black, Bronze, Matte Powder White and Wheat Diffused - [NAPT-3RDN](https://noralighting.com/product/napt-3rdn/) - 3" Apollo Round Flangeless Downlight Trim. Available in Black, Bronze, Haze, Matte Powder White and Wheat Diffused - [NAPF-3RPH](https://noralighting.com/product/napf-3rph/) - 3" Apollo Round Flanged Pinhole Trim. Available in Black, Bronze, Matte Powder White and Wheat Diffused - [NAPT-3SWW](https://noralighting.com/product/napt-3sww/) - 3" Apollo Square Flangeless Wall Wash Trim. Available in Black, Bronze, Matte Powder White and Wheat Diffused - [NAPT-3SPH](https://noralighting.com/product/napt-3sph/) - 3" Apollo Square Flangeless Pinhole Trim. Available in Black, Bronze, Matte Powder White and Wheat Diffused - [NAPT-3SDN](https://noralighting.com/product/napt-3sdn/) - 3" Apollo Square Flangeless Downlight Trim. Available in Black, Bronze, Haze, Matte Powder White and Wheat Diffused - [NAPF-3SWW](https://noralighting.com/product/napf-3sww/) - 3" Apollo Square Flanged Wall Wash Trim. Available in Black, Bronze, Matte Powder White and Wheat Diffused - [NAPF-3SPH](https://noralighting.com/product/napf-3sph/) - 3" Apollo Square Flanged Pinhole Trim. Available in Black, Bronze, Matte Powder White and Wheat Diffused - [NAPF-3SDN](https://noralighting.com/product/napf-3sdn/) - 3" Apollo Square Flanged Downlight Trim. Available in Black, Bronze, Haze, Matte Powder White and Wheat Diffused - [NAPL-3WIDE](https://noralighting.com/product/napl-3wide/) - A wide lens spreads light over a broad area, delivering even, uniform illumination ideal for general lighting applications. Includes an accessory holder and up to 2000lm max. Not compatible with wet location trims (clear or frosted lens). Compatible Housings: NHAPIC-3R: 3" Apollo Round IC Housing with Field Changeable Optics NHAPIC-3S: 3" Apollo Square IC Housing with Field Changeable Optics Compatible Optics: NAPO-3D25: 26° Spot TIR Optic NAPO-3D40: 38° Narrow Flood TIR Optic NAPO-3D55: 55° Flood TIR Optic - [NAPL-3SQUARE](https://noralighting.com/product/napl-3square/) - A square lens provides a clean, modern aesthetic while evenly distributing light, making it ideal for spaces that complement geometric or architectural designs. Includes an accessory holder and up to 2000lm max. Not compatible with wet location trims (clear or frosted lens). Compatible Housings: NHAPIC-3R: 3" Apollo Round IC Housing with Field Changeable Optics NHAPIC-3S: 3" Apollo Square IC Housing with Field Changeable Optics Compatible Optics: NAPO-3D25: 26° Spot TIR Optic NAPO-3D40: 38° Narrow Flood TIR Optic NAPO-3D55: 55° Flood TIR Optic - [NAPL-3SOLITE](https://noralighting.com/product/napl-3solite/) - A Solite lens features a micro-prismatic surface that minimizes glare while maintaining high light transmission, delivering crisp, uniform illumination with excellent visual comfort. Includes an accessory holder and up to 2000lm max. Not compatible with wet location trims (clear or frosted lens). Compatible Housings: NHAPIC-3R: 3" Apollo Round IC Housing with Field Changeable Optics NHAPIC-3S: 3" Apollo Square IC Housing with Field Changeable Optics Compatible Optics: NAPO-3D25: 26° Spot TIR Optic NAPO-3D40: 38° Narrow Flood TIR Optic NAPO-3D55: 55° Flood TIR Optic - [NAPL-3LINEAR](https://noralighting.com/product/napl-3linear/) - A linear lens shapes light into an elongated beam pattern, providing smooth, even illumination ideal for wall washing or highlighting architectural lines. Includes an accessory holder and up to 2000lm max. Not compatible with wet location trims (clear or frosted lens). Compatible Housings: NHAPIC-3R: 3" Apollo Round IC Housing with Field Changeable Optics NHAPIC-3S: 3" Apollo Square IC Housing with Field Changeable Optics Compatible Optics: NAPO-3D25: 26° Spot TIR Optic NAPO-3D40: 38° Narrow Flood TIR Optic NAPO-3D55: 55° Flood TIR Optic - [NAPL-3HEX](https://noralighting.com/product/napl-3hex/) - A honeycomb louver reduces glare and enhances visual comfort by shielding the light source while maintaining precise light control and beam definition. Includes an accessory holder and up to 2000lm max. Not compatible with wet location trims (clear or frosted lens). Compatible Housings: NHAPIC-3R: 3" Apollo Round IC Housing with Field Changeable Optics NHAPIC-3S: 3" Apollo Square IC Housing with Field Changeable Optics Compatible Optics: NAPO-3D25: 26° Spot TIR Optic NAPO-3D40: 38° Narrow Flood TIR Optic NAPO-3D55: 55° Flood TIR Optic - [NAPL-3DIFF](https://noralighting.com/product/napl-3diff/) - A diffused lens softens and evenly distributes light, reducing glare and creating a smooth, uniform illumination ideal for general or ambient lighting. Includes an accessory holder and up to 2000lm max. Not compatible with wet location trims (clear or frosted lens). Compatible Housings: NHAPIC-3R: 3" Apollo Round IC Housing with Field Changeable Optics NHAPIC-3S: 3" Apollo Square IC Housing with Field Changeable Optics Compatible Optics: NAPO-3D25: 26° Spot TIR Optic NAPO-3D40: 38° Narrow Flood TIR Optic NAPO-3D55: 55° Flood TIR Optic - [NIOC-1RNG](https://noralighting.com/product/nioc-1rng/) - 1" Deep regressed cone reflectors optimize visual cut-off. Iolite can-less trims require a compatible LED module and driver box. Compatible LED module: NIOC-1LED Compatible Driver Box: NJCB-09 Finishes: BB: Black Reflector / Black Flange HW: Haze Reflector / Warm White Flange MPW: Bright White Reflector / Bright White Flange WW: Warm White Reflector / Warm White Flange Accessories: NIO-1AS: Translucent/Opaque Deco Collars NIO-1HC: Hex Louver NF-R124: Universal New Construction Frame-In NFC-R231: New Construction Frame-In with Collar - [NIOC-1SNG](https://noralighting.com/product/nioc-1sng/) - 1" Square deep regressed cone reflectors optimize visual cut-off. Iolite can-less trims require a compatible LED module and driver box. Compatible LED module: NIOC-1LED Compatible Driver Box: NJCB-09 Finishes: BB: Black Reflector / Black Flange HW: Haze Reflector / Warm White Flange MPW: Bright White Reflector / Bright White Flange WW: Warm White Reflector / Warm White Flange Accessories: NIO-1AS: Translucent/Opaque Deco Collars NIO-1HC: Hex Louver NF-R124: Universal New Construction Frame-In NFC-R231: New Construction Frame-In with Collar - [NYLD2-6C](https://noralighting.com/product/nyld2-6c/) - 6" Architectural grade LED cylinder featuring with deep set optics featuring a reflector or baffle cone for optimal visual comfort. Utilizing an array of LEDs, giving bright spectacular light output and low power consumption. Features Also available in Surface, Stem or Wall mounted Triac, ELV or 0-10V dimming options 5-Year limited warranty cULus listed for indoor damp location with feed through Input Voltage: 120V or 120-277V Lumens: 750lm to 1000lm Color Temperature: Dedicated CCT (2700K, 3000K, 3500K, 4000K) Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Comfort Dim (3000K to 2000K) Mounting: Cylinder comes with 8' of field cuttable aircraft cable and offset cable (5-wire) for power and dimming Trim Types: Reflector, Adjustable, or Baffle Emergency Options: 6W emergency driver with integral test switch (compatible with dedicated CCT & reflector only). Cylinder is also compatible with a 7W remote emergency driver and test switch (NEPK-07LEDUNV), which requires ceiling access. - [NYLD2-6W](https://noralighting.com/product/nyld2-6w/) - 6" Architectural grade LED cylinder featuring with deep set optics featuring a reflector or baffle cone for optimal visual comfort. Utilizing an array of LEDs, giving bright spectacular light output and low power consumption. Features Also available in Surface, Stem or Cable mounted Triac, ELV or 0-10V dimming options 5-Year limited warranty cULus listed for indoor wet location Input Voltage: 120V or 120-277V Lumens: 750lm to 1000lm Color Temperature: Dedicated CCT (2700K, 3000K, 3500K, 4000K) Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Comfort Dim (3000K to 2000K) Mounting: Cylinder is supplied with hardware to mount directly over a junction box. Trim Types: Reflector, Adjustable, or Baffle Emergency Options: 6W emergency driver with integral test switch (compatible with dedicated CCT & reflector only). Cylinder is also compatible with a 7W remote emergency driver and test switch (NEPK-07LEDUNV), which requires ceiling access. - [NYLD2-6P](https://noralighting.com/product/nyld2-6p/) - 6" Architectural grade LED cylinder featuring with deep set optics featuring a reflector or baffle cone for optimal visual comfort. Utilizing an array of LEDs, giving bright spectacular light output and low power consumption. Features Also available in Surface, Cable or Wall mounted Triac, ELV or 0-10V dimming options 5-Year limited warranty cULus listed for indoor damp location with feed through Input Voltage: 120V or 120-277V Lumens: 750lm to 1000lm Color Temperature: Dedicated CCT (2700K, 3000K, 3500K, 4000K) Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Comfort Dim (3000K to 2000K) Mounting: Cylinder includes five threaded rods that can be customized up to 7' and attached to matching canopy Trim Types: Reflector, Adjustable, or Baffle Emergency Options: 6W emergency driver with integral test switch (compatible with dedicated CCT & reflector only). Cylinder is also compatible with a 7W remote emergency driver and test switch (NEPK-07LEDUNV), which requires ceiling access. - [NYLD2-6S](https://noralighting.com/product/nyld2-6s/) - 6" Architectural grade LED cylinder featuring with deep set optics featuring a reflector or baffle cone for optimal visual comfort. Utilizing an array of LEDs, giving bright spectacular light output and low power consumption. Features Also available in Cable, Stem or Wall mounted Triac or ELV dimming options 5-Year limited warranty cULus listed for indoor damp location with feed through Input Voltage: 120V or 120-277V Lumens: 750lm to 1000lm Color Temperature: Dedicated CCT (2700K, 3000K, 3500K, 4000K) Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Comfort Dim (3000K to 2000K) Mounting: Cylinder is supplied with hardware to mount directly over junction box. Trim Types: Reflector, Adjustable, or Baffle Emergency Options: 6W emergency driver with integral test switch (compatible with dedicated CCT & reflector only). Cylinder is also compatible with a 7W remote emergency driver and test switch (NEPK-07LEDUNV), which requires ceiling access. - [NRM3-68](https://noralighting.com/product/nrm3-68/) - Marquise III COB Series enhances an established series of downlighting with the latest COB technology by Signify®. The COB allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. Lumens / Wattage: Up to 2500lm / 26W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Decorative Glass (Ordered Separately): Variety of tempered frosted or blue glass NTG-6FC (6" Tempered Frosted Glass with Clear Center) NTG-6HC (6" Tempered Clear Glass with Frosted Center and 3-1/8" Open Center) Compatible Housings: Reflector is only compatible with respective Marquise II series frames manufactured by Nora Lighting. NHM3-6 (6" Non-IC New Construction) NHRM3-6 (6" Non-IC Remodel) NHMIC3-6 (6" IC New Construction) NHMICD3-6 (6" Double Wall IC New Construction) NHRMIC3-6 (6" IC Remodel) Listing: - cULus Listed for Wet Location when used with compatible housing - 5-Year Limited Warranty - [NC3-68](https://noralighting.com/product/nc3-68/) - Sapphire III series is an architectural grade LED high-lumen downlight available in 4", 6", and 8" deep cone reflectors that provide over 55º cut-off with even illumination for visual comfort. The Sapphire III uses the latest COB technology by Signify®. The COB allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. The Sapphire III series is available in new construction, remodel, and retrofit configurations. Lumens / Wattage: Up to 4500lm / 46W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Decorative Glass (Ordered Separately): Up to two glasses can be used per luminaire NTG-6FC (6" Tempered Frosted Glass with Clear Center) NTG-6HC (6" Tempered Clear Glass with Frosted Center and 3-1/8" Open Center) Compatible Frame-Ins: The reflector is only compatible with Sapphire III frame-ins manufactured by Nora Lighting. NCH3-6 (6" Universal New Construction Frame-In) NCHR3-6 (6" Remodel Frame-In) Emergency: Reflector is compatible with a remote test switch Listing: - Assembled in the USA with domestic and foreign components - cULus Listed for Wet Location when used with compatible frame-in - ENERGY STAR certified - 5-Year Limited Warranty - [NCR3-68](https://noralighting.com/product/ncr3-68/) - The Sapphire III COB Retrofit Series is an architectural-grade LED high-lumen replacement. Using existing commercial or architectural frame-ins, replace old light sources and reflectors with the latest LED technology. Each luminaire includes a flexible conduit and a junction box with dimmable drivers. The Sapphire III COB Series is an architectural-grade LED high-lumen downlight. The Sapphire III uses the latest COB technology by Signify®. The COB allows for better optic control offering 3 beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. The reflectors have been designed for high efficiency (LPW) while providing low aperture brightness. FEATURES Retrofit existing architectural or commercial frame-ins with the latest LED technology Over 80% energy savings when compared to incandescent Signify® COB technology Specifiable beam spreads Lumens / Wattage: Up to 4500lm / 46W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Decorative Glass (Ordered Separately): Up to two glasses can be used per luminaire NTG-6FC (6" Tempered Frosted Glass with Clear Center) NTG-6HC (6" Tempered Clear Glass with Frosted Center and 3-1/8" Open Center) Emergency: Luminaire is compatible with NEPK-07LEDUNV (ordered separately) Listing: - Assembled in the USA with domestic and foreign components - cULus classified for Wet Location - ENERGY STAR certified - 5-Year Limited Warranty - [NYLS3-6P](https://noralighting.com/product/nyls3-6p/) - 6" Architectural-grade LED cylinder featuring a deep cone reflector with deep-set optics for optimal visual comfort. Over a thousand options are available, and the latest COB technology allows for better optic control and uniformity. Trim Options: Open Reflector, Wall Wash, or Reflector for Decorative Glass (ordered separately) Input Voltage: 120V or 120-277V Lumens: Up to 5500lm / 58W Color Temperature: 2700K, 3000K, 3500K or 4000K Mounting: The cylinder includes five threaded rods that can be customized up to 7' and attached to matching canopy Decorative Ring: Cylinder can be specified with mounting holes for decorative rings (up to two) NTG-6FC = Tempered Frosted Glass with Clear Center NTG-6HC = Tempered Clear Glass with Frosted Center and 3-1/8" Open Center Emergency Options: 6W emergency driver with integral test switch (compatible with reflector only). - [NYLS3-6S](https://noralighting.com/product/nyls3-6s/) - 6" Architectural-grade LED cylinder featuring a deep cone reflector with deep-set optics for optimal visual comfort. Over a thousand options are available, and the latest COB technology allows for better optic control and uniformity. Trim Options: Open Reflector, Wall Wash, or Reflector for Decorative Glass (ordered separately) Input Voltage: 120V or 120-277V Lumens: Up to 5500lm / 58W Color Temperature: 2700K, 3000K, 3500K or 4000K Mounting: The cylinder is supplied with hardware to mount directly over the junction box. Decorative Ring: Cylinder can be specified with mounting holes for decorative rings (up to two) NTG-6FC = Tempered Frosted Glass with Clear Center NTG-6HC = Tempered Clear Glass with Frosted Center and 3-1/8" Open Center Emergency Options: 6W emergency driver with integral test switch (compatible with reflector only). Cylinder is also compatible with a 7W remote emergency driver and test switch (NEPK-07LEDUNV), which requires ceiling access. - [NYLS3-6W](https://noralighting.com/product/nyls3-6w/) - 6" Architectural-grade LED cylinder featuring a deep cone reflector with deep-set optics for optimal visual comfort. Over a thousand options are available, and the latest COB technology allows for better optic control and uniformity. Trim Options: Open Reflector, Wall Wash, or Reflector for Decorative Glass (ordered separately) Input Voltage: 120V or 120-277V Lumens: Up to 5500lm / 58W Color Temperature: 2700K, 3000K, 3500K or 4000K Mounting: The cylinder is supplied with hardware to mount directly over the junction box. Decorative Ring: Cylinder can be specified with mounting holes for decorative rings (up to two) NTG-6FC = Tempered Frosted Glass with Clear Center NTG-6HC = Tempered Clear Glass with Frosted Center and 3-1/8" Open Center Emergency Options: 6W emergency driver with integral test switch (compatible with reflector only). Cylinder is also compatible with a 7W remote emergency driver and test switch (NEPK-07LEDUNV), which requires ceiling access. - [NYLS3-6C](https://noralighting.com/product/nyls3-6c/) - 6" Architectural-grade LED cylinder featuring a deep cone reflector with deep-set optics for optimal visual comfort. Over a thousand options are available, and the latest COB technology allows for better optic control and uniformity. Trim Options: Open Reflector, Wall Wash, or Reflector for Decorative Glass (ordered separately) Input Voltage: 120V or 120-277V Lumens: Up to 5500lm / 58W Color Temperature: 2700K, 3000K, 3500K or 4000K Mounting: The cylinder includes an 8' field-cuttable aircraft cable and offset cable (5-wire) for power and dimming. Decorative Ring: Cylinder can be specified with mounting holes for decorative rings (up to two) NTG-6FC = Tempered Frosted Glass with Clear Center NTG-6HC = Tempered Clear Glass with Frosted Center and 3-1/8" Open Center Emergency Options: 6W emergency driver with integral test switch (compatible with reflector only). Cylinder is also compatible with a 7W remote emergency driver and test switch (NEPK-07LEDUNV), which requires ceiling access. - [NLOPAC-R4REGRECKIT](https://noralighting.com/product/nlopac-r4regreckit/) - Retrofit kit for mounting 4" Regressed AC Opal to 4" recessed housings. Allows surface mount luminaire to install over existing installations. Compatible Product: NLOPAC-R4509T24 = 4" AC Opal LED Surface Mount NLOPAC-R4REGT24 = 4" Regressed AC Opal LED Surface Mount - [NUDA-JC72](https://noralighting.com/product/nuda-jc72/) - Jumper cable connects two NUDA fixtures or to a junction box (NUA-902) Length: 72″ Finish: Black or White Compatible Luminaires: NUDA: 120V Adjustable LEDUR Under Cabinet with Selectable CCT  - [NUDA-JC24](https://noralighting.com/product/nuda-jc24/) - Jumper cable connects two NUDA fixtures or to a junction box (NUA-902) Length: 24″ Finish: Black or White Compatible Luminaires: NUDA: 120V Adjustable LEDUR Under Cabinet with Selectable CCT  - [NUDA-JC12](https://noralighting.com/product/nuda-jc12/) - Jumper cable connects two NUDA fixtures or to a junction box (NUA-902) Length: 12″ Finish: Black or White Compatible Luminaires: NUDA: 120V Adjustable LEDUR Under Cabinet with Selectable CCT  - [NUDA-JC06](https://noralighting.com/product/nuda-jc06/) - Jumper cable connects two NUDA fixtures or to a junction box (NUA-902) Length: 6″ Finish: Black or White Compatible Luminaires: NUDA: 120V Adjustable LEDUR Under Cabinet with Selectable CCT  - [NUDA-END](https://noralighting.com/product/nuda-end/) - Connects two luminaires seamlessly. (Note: One connector is included with each fixture) Finish: White Compatible Luminaires: NUDA: 120V Adjustable LEDUR Under Cabinet with Selectable CCT  - [NUDA-HW72](https://noralighting.com/product/nuda-hw72/) - 72" 3-Wire Power cord used to connect luminaire to NUA-902 or junction box. Finish: Black or White Compatible Luminaires: NUDA: 120V Adjustable LEDUR Under Cabinet with Selectable CCT  - [NUDA-CP72](https://noralighting.com/product/nuda-cp72/) - 72" 3-Wire Cord used to connect the luminaire to an outlet. Finish: Black or White Compatible Luminaires: NUDA: 120V Adjustable LEDUR Under Cabinet with Selectable CCT  - [NUDA-42TW](https://noralighting.com/product/nuda-42tw/) - 120V Adjustable LED under-cabinet luminaires feature two switches for adjusting the color temperature and an On/Off switch. Each fixture includes a USB-A port, USB-C port, and five color temperature options. Luminaires produce an average of 600 lumens per foot. LEDUR uniform reflectance is excellent when used under a cabinet over granite, polished stone, or any reflective surface. Additionally, it is excellent in retail display lighting where the diode image might distract from display merchandise. Adjustability: ± 35° Length: 42" Input Voltage: 120V Lumens / Wattage: 600lm per ft. / 20W Color Temperature: Selectable CCT (27K/30K/35K/40K/50K) Color Rendering Index: 90+ CRI Finish: Black or White Maximum Run Length: 150W max. Accessories: NUA-902: Junction Box NUDA-CP72: 72" Cord & Plug Power Cord NUDA-HW72: 72" Hardwire Power Cord NUDA-END: End-to-End Connector NUDA-JC06: 6" Jumper Cable NUDA-JC12: 12" Jumper Cable NUDA-JC24: 24" Jumper Cable NUDA-JC72: 72" Jumper Cable  - [NUDA-32TW](https://noralighting.com/product/nuda-32tw/) - 120V Adjustable LED under-cabinet luminaires feature two switches for adjusting the color temperature and an On/Off switch. Each fixture includes a USB-A port, USB-C port, and five color temperature options. Luminaires produce an average of 600 lumens per foot. LEDUR uniform reflectance is excellent when used under a cabinet over granite, polished stone, or any reflective surface. Additionally, it is excellent in retail display lighting where the diode image might distract from display merchandise. Adjustability: ± 35° Length: 32" Input Voltage: 120V Lumens / Wattage: 600lm per ft. / 16.5W Color Temperature: Selectable CCT (27K/30K/35K/40K/50K) Color Rendering Index: 90+ CRI Finish: Black or White Maximum Run Length: 150W max. Accessories: NUA-902: Junction Box NUDA-CP72: 72" Cord & Plug Power Cord NUDA-HW72: 72" Hardwire Power Cord NUDA-END: End-to-End Connector NUDA-JC06: 6" Jumper Cable NUDA-JC12: 12" Jumper Cable NUDA-JC24: 24" Jumper Cable NUDA-JC72: 72" Jumper Cable  - [NUDA-24TW](https://noralighting.com/product/nuda-24tw/) - 120V Adjustable LED under-cabinet luminaires feature two switches for adjusting the color temperature and an On/Off switch. Each fixture includes a USB-A port, USB-C port, and five color temperature options. Luminaires produce an average of 600 lumens per foot. LEDUR uniform reflectance is excellent when used under a cabinet over granite, polished stone, or any reflective surface. Additionally, it is excellent in retail display lighting where the diode image might distract from display merchandise. Adjustability: ± 35° Length: 24" Input Voltage: 120V Lumens / Wattage: 600lm per ft. / 15W Color Temperature: Selectable CCT (27K/30K/35K/40K/50K) Color Rendering Index: 90+ CRI Finish: Black or White Maximum Run Length: 150W max. Accessories: NUA-902: Junction Box NUDA-CP72: 72" Cord & Plug Power Cord NUDA-HW72: 72" Hardwire Power Cord NUDA-END: End-to-End Connector NUDA-JC06: 6" Jumper Cable NUDA-JC12: 12" Jumper Cable NUDA-JC24: 24" Jumper Cable NUDA-JC72: 72" Jumper Cable  - [NUDA-16TW](https://noralighting.com/product/nuda-16tw/) - 120V Adjustable LED under-cabinet luminaires feature two switches for adjusting the color temperature and an On/Off switch. Each fixture includes a USB-A port, USB-C port, and five color temperature options. Luminaires produce an average of 600 lumens per foot. LEDUR uniform reflectance is excellent when used under a cabinet over granite, polished stone, or any reflective surface. Additionally, it is excellent in retail display lighting where the diode image might distract from display merchandise. Adjustability: ± 35° Length: 16" Input Voltage: 120V Lumens / Wattage: 600lm per ft. / 11W Color Temperature: Selectable CCT (27K/30K/35K/40K/50K) Color Rendering Index: 90+ CRI Finish: Black or White Maximum Run Length: 150W max. Accessories: NUA-902: Junction Box NUDA-CP72: 72" Cord & Plug Power Cord NUDA-HW72: 72" Hardwire Power Cord NUDA-END: End-to-End Connector NUDA-JC06: 6" Jumper Cable NUDA-JC12: 12" Jumper Cable NUDA-JC24: 24" Jumper Cable NUDA-JC72: 72" Jumper Cable  - [NUDA-10TW](https://noralighting.com/product/nuda-10tw/) - 120V Adjustable LED under-cabinet luminaires feature two switches for adjusting the color temperature and an On/Off switch. Each fixture contains five color temperature options and is linkable up to 150W. Luminaires produce an average of 600 lumens per foot. LEDUR uniform reflectance is excellent when used under a cabinet over granite, polished stone, or any reflective surface. Additionally, it is excellent in retail display lighting where the diode image might distract from display merchandise. Adjustability: ± 35° Length: 10" Input Voltage: 120V Lumens / Wattage: 600lm per ft. / 7W Color Temperature: Selectable CCT (27K/30K/35K/40K/50K) Color Rendering Index: 90+ CRI Finish: Black or White Maximum Run Length: 150W max. Accessories: NUA-902: Junction Box NUDA-CP72: 72" Cord & Plug Power Cord NUDA-HW72: 72" Hardwire Power Cord NUDA-END: End-to-End Connector NUDA-JC06: 6" Jumper Cable NUDA-JC12: 12" Jumper Cable NUDA-JC24: 24" Jumper Cable NUDA-JC72: 72" Jumper Cable  - [NIOB-1RSL](https://noralighting.com/product/niob-1rsl/) - 1” Iolite BWF reflectors can be specified for use with Iolite new construction or remodel housings. Adjustable slot aperture focus the beam spread through 1-1/8” x 1-3/8” opening. Compatible Housings: NHIOICD-16, NHIOICDCP-16, NHRIOIC-16 Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 600lm / 10W Optics: Spot, Narrow Flood, Flood - [NOXAC-5631](https://noralighting.com/product/noxac-5631/) - AC Onyx 5”/6” Retrofit Series requires no driver and allow for a sleek design. Spun aluminum construction provides clean sharp edges and is suitable for use with most 5” and 6” recessed housings. Deep regressed optics and round aperture deliver even and glare-free illumination. Features: Recessed mount into 5"/6" housing. Includes medium base socket adapter for easy retrofitting in 5"/6" recessed housings. Quick connector is compatible with dedicated LED housings. Required by some codes in recessed can applications or to meet energy rebate program requirements. Lumens / Wattage: 1150lm / 15.5W Color Temperature: Dedicated CCT (2700K, 3000K, 3500K, 4000K or 5000K) Dimming: Triac or ELV Accessories: NOX-56BAF: Baffle Insert NOX-56REFL: Reflector Insert NOX-56EYELID: 5"/6" Round Eyelid for Onyx NOX-56OR-W: 5"/6" Round Oversize Ring for Onyx - [NOXAC-5631TW](https://noralighting.com/product/noxac-5631tw/) - 5"/6" AC Onyx Retrofit Series requires no driver and allows for a sleek design. Spun aluminum construction provides clean sharp edges and is suitable for use with most 5” and 6" recessed housings. Deep-regressed optics and round aperture deliver even and glare-free illumination. Features: AC LED (No Driver) Dimmable Five Selectable CCT(2700K / 3000K / 3500K / 4000K / 5000K) Includes medium base socket adapter for easy retrofitting in 5"/6" recessed housings Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: Up to 1150lm / 16.5W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Note: For dedicated color temperature, see NOXAC-5632 Finish: Black Reflector / Black Flange or White Reflector / White Flange Dimming: Triac or ELV Accessories: NOX-56BAF: Baffle Insert NOX-56REFL: Reflector Insert NRA-212SM: GU24 Socket Adapter NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch - [NM1-170](https://noralighting.com/product/nm1-170/) - M1 miniature recessed series features quality and convenience with easy installation for indoor applications. Luminaires include four plastic downlight trims, three optics and 6" quick connect. Series is available in 2700K or 3000K and requires a 12VDC dimmable driver. Features No housing required Easy installation for remodel or new construction applications Field changeable optics (spot, flood and wide) Threaded LED module allows for field changeable trims Quick disconnect allows for extended lengths 5-year limited warranty Lumens / Wattage: 100lm / 2W Color Temperature: 2700K or 3000K Color Rendering Index: 90+ CRI Optics: Four Field Changeable Optics included with each (15° Spot, 45° Narrow Flood - installed, 60° Flood - frosted, 60° Flood - clear) Finish: Each fixture includes (2) black and (2) white trims in round and square Optional Trims: NM1-RSS: Round Stainless Steel Trim NM1-SSS: Square Stainless Steel Trim NM1-RSSD: Round Stainless Steel Indicator Trim NM1-RAIHEC: Round Hex Cell Stainless Steel Trim NM1-RLOUV: Round Louver Stainless Steel Trim NM1-RAEYELID: Round Scoop Trim Accessories: NM1-F: New Construction Frame-In Plate NM1-TM6: Splitter Cable (1 input - 6 output) NM1-WH6: Wire Harness System (1 input - 6 output) NM1-EXT: Extension Cables (6" to 240") Drivers: NM1-DVR12: 12V 12W Non-Dimmable Hardwire Driver NPSU-60W/12: 12V 60W Dimmable Hardwire Driver - [NIOB-1SNG](https://noralighting.com/product/niob-1sng/) - 1” Iolite BWF reflectors can be specified for use with Iolite new construction or remodel housings. Straight reflector with sharp edge optimizes visual cut-off. Compatible Housings: NHIOICD-16, NHIOICDCP-16, NHRIOIC-16 Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 600lm / 10W Optics: Spot, Narrow Flood, Flood - [NIOB-1RPH](https://noralighting.com/product/niob-1rph/) - 1” Iolite BWF reflectors can be specified for use with Iolite new construction or remodel housings. Pinhole reflector focuses the beam spread through small opening. Compatible Housings: NHIOICD-16, NHIOICDCP-16, NHRIOIC-16 Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 600lm / 10W Optics: Spot, Narrow Flood, Flood - [NIOB-1RNG](https://noralighting.com/product/niob-1rng/) - 1" Iolite BWF reflectors can be specified for use with Iolite new construction or remodel housings. Straight reflector with sharp edge optimizes visual cut-off. Compatible Housings: NHIOICD-16, NHIOICDCP-16, NHRIOIC-16 Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 600lm / 10W Optics: Spot, Narrow Flood, Flood - [NIOB-1SNB](https://noralighting.com/product/niob-1snb/) - 1" Iolite BWF reflectors can be specified for use with Iolite new construction or remodel housings. Bullnose reflector with a filleted aperture which allows for minimal aperture brightness while still producing the nadir footcandles. Compatible Housings: NHIOICD-16, NHIOICDCP-16, NHRIOIC-16 Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 600lm / 10W Optics: Spot, Narrow Flood, Flood - [NIOB-1RNB](https://noralighting.com/product/niob-1rnb/) - 1” Iolite BWF reflectors can be specified for use with Iolite new construction or remodel housings. Bullnose reflector with a filleted aperture which allows for minimal aperture brightness while still producing the nadir footcandles. Compatible Housings: NHIOICD-16, NHIOICDCP-16, NHRIOIC-16 Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 600lm / 10W Optics: Spot, Narrow Flood, Flood - [NX-617-LED](https://noralighting.com/product/nx-617-led/) - LED exit sign with battery backup for illumination during power loss. Luminaire is powered by LED sources for maximum life without maintenance. Ideal for egress lighting where splashing, non-corrosive liquids and dripping may occur. BODY 13" Width X 8-7/8" Height X 2-1/2" Depth Extruded aluminum housing and acrylic panel FACE Impact resistant polycarbonate white face plate with flame retardant and internal gasket for wet location rating. Optional dual face plate included. Fully illuminated 6" letters with 3/4" stroke and field selectable directional chevrons included. MOUNTING Mounting hardware included for ceiling, wall or side mount applications. Listed for installations indoor, outdoor or wet locations. ELECTRICAL Voltage: 120/277VAC 60Hz input Wattage: 2.2W Battery: 3.6V Replaceable 400mAh NiCad battery Recharge Time: 24 hours Operating Temperature: Standard: 0°C to 50°C Cold Weather Option: -25°C to 50°C EMERGENCY CIRCUIT During loss of power, NiCad battery will operate LED exit sign for 90 minutes. Battery requires 24 hours to recharge when power is restored. LABELS AND LISTINGS · UL 924 Listed for Wet Locations · NFPA 70 & NFPA 101 Life Safety Code · California Energy Commission (CEC) Compliant · Title 20 Compliant - [NX-603-LED](https://noralighting.com/product/nx-603-led/) - *** While Supplies Last, replacement item: NX-603D-LED *** For emergency applications, Nora Lighting offers its revolutionary, long life, low maintenance LED exit sign with battery backup. In the event of power loss, the LED light sources will remain illuminated at their full light level for 90 minutes. BODY 11-3/4" Width x 7-1/4" Height x 1-3/4" Depth Injection-molded thermoplastic housing FACE Single or dual configuration. Lettered face is provided if dual face is preferred 6" high text with color diffusion Replaceable knockout directional chevrons MOUNTING Wall, side, or ceiling Mounting hardware and canopy included ELECTRICAL 120V/277V input Total power usage: 3.3W LED light source NiCad (nickel-cadmium) replaceable battery 90 minute emergency operation Internal solid state charging circuit TESTING High-charge / ready operation indicator light Test button Automatic reset Circuitry Protection Short circuit and brown-out protection Disconnect for deep discharge LIFE EXPECTANCY LED sources and PC circuitry are rated for approximately 25 years with no change in illumination level 5 year warranty on materials and workmanship APPROVALS UL 924 NFPA NEC State & Municipal Suitable for damp locations Certified to the energy efficiency standards of California Title 20 ACCESSORIES NEG-60: Wet Location Enclosure - [NJCB-12](https://noralighting.com/product/njcb-12/) - IC rated driver box with dimmable driver and includes a 16.5" quick connect wire for easy installation. Iolite can-less driver boxes require a compatible LED module and trim. Compatible LED module: NIOC-24LED Compatible trims: NIOC-2RNB, NIOC-2RNDC, NIOC-2SNDSQ, NIOC-2RPH, NIOC-4RNB, NIOC-4RNDC, NIOC-4SNDSQ, NIOC-4RPH, NIOC-4RSP, NIOC-4RTLNDC, NIOC-4RTLSLA Input Voltage: 120VAC or 120-277VAC Wattage: 12W Dimming: Phase or 0-10V Accessories: NCA-EW-4: 4' Quick Connect Extension Cable NCA-EW-10: 10' Quick Connect Extension Cable NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch - [NPDBLSW-E14](https://noralighting.com/product/npdblsw-e14/) - LED Backlit can be utilized in offices, conference rooms, libraries and other tasks areas where general illumination is desired. White opalescent diffused lens optimizes output while reducing LED diode image. Panels are packaged in quantities of two & priced individually. FEATURES • Field Selectable Lumens • Field Selectable CCT • Fits most grid ceilings • Surface, Pendant and Hard ceiling recessed kits available • Dimmable with compatible 0-10V dimmer • 120-347V • DLC Listed (V6.0) Lumens / Wattage: Up to 3650lm / 30W Color Temperature: Field Selectable (3000K / 3500K / 4000K) Finish: White Accessories: NPDBL-JB4X4 = 4' Junction box for daisy chaining NPDBL-14DFK = Surface Mount Frame NPDBL-14RFK = Recessed Mounting Kit NPDBL-PKW = Pendant Mounting Kit  - [NPDBLSW-E22](https://noralighting.com/product/npdblsw-e22/) - LED Backlit can be utilized in offices, conference rooms, libraries and other tasks areas where general illumination is desired. White opalescent diffused lens optimizes output while reducing LED diode image. Panels are packaged in quantities of two & priced individually. FEATURES • Field Selectable Lumens • Field Selectable CCT • Fits most grid ceilings • Surface, Pendant and Hard ceiling recessed kits available • 120-347V input; 0-10V dimming • DLC Listed (V6.0) Lumens / Wattage: Up to 3750lm / 30W Color Temperature: Field Selectable (3000K / 3500K / 4000K) Finish: White Accessories: NPDBL-JB4X4 = 4' Junction box for daisy chaining NPDBL-22DFK = Surface Mount Frame NPDBL-22RFK = Recessed Mounting Kit NPDBL-PKW = Pendant Mounting Kit  - [NPDBLSW-E24](https://noralighting.com/product/npdblsw-e24/) - LED Backlit can be utilized in offices, conference rooms, libraries and other tasks areas where general illumination is desired. White opalescent diffused lens optimizes output while reducing LED diode image. Panels are packaged in quantities of two & priced individually. FEATURES • Field Selectable Lumens • Field Selectable CCT • Fits most grid ceilings • Surface, Pendant and Hard ceiling recessed kits available • Dimmable with compatible 0-10V dimmer • 120-347V • DLC Listed (V6.0) Lumens / Wattage: Up to 5700lm / 45W Color Temperature: Field Selectable (3000K / 3500K / 4000K) Finish: White Accessories: NPDBL-JB4X4 = 4' Junction box for daisy chaining NPDBL-24DFK = Surface Mount Frame NPDBL-24RFK = Recessed Mounting Kit NPDBL-PKW = Pendant Mounting Kit  - [NTL-213](https://noralighting.com/product/ntl-213/) - While Supplies Last Nora Lighting's low voltage track fixtures are an outstanding, state-of-the-art solution for energy efficient task and accent lighting. Used where color rendition and high resolution are desired. low voltage track features precise beam control, a crisp "white" light and longer lamp life. Featuring top quality and great design at an affordable price, all 200 Series track fixtures are energy efficient and have a built-in 50 or 75 watt transformer. Use different sized beams of halogen MR16 lamps to customize your lighting effects, highlight furnishings and illuminate favorite decorations. Transformer: 3-7/8: x 1-3/8" x 1" - [NUDTW-8808](https://noralighting.com/product/nudtw-8808/) - LEDUR TW allows the end user to select between three different CCT at any time with a three-position switch. The edge-lit placement of the LEDs provides smooth uniform light across the counter surface, eliminating hot spot reflections in granite and other surfaces normally generated by traditional LED under cabinets. LEDUR TW features easy installation with captive screws under removable caps. Completely dimmable and linkable, the LEDUR TW is a perfect solution for energy efficient lighting to replace halogen or fluorescent under cabinets offering the dimming flexibility of halogen or xenon and the even light distribution, cool operation and energy efficiency of fluorescents. FEATURES Built-in on/off rocker switch and 3 positions sliding color temperature switch Edge lit design eliminates LED diode image Linkable up to 400 Watts fixtures 3 wire grounded electrical port on both ends for power or linking Captive Screws for easy mounting Input Voltage: 120V Lumens / Wattage: 475lm per foot / 4.9W Color Temperature: 3 Selectable CCT (2700K / 3000K / 3500K) or (3000K / 4000K / 5000K) Color Rendering Index: 90+ CRI Dimming: Triac or ELV Length: 8" Finish: Bronze - [NRA-6301](https://noralighting.com/product/nra-6301/) - Adjustable bar hangers with captive nails and Hanger Brackets for Brick LED Step Light (2 per set). Face Plate and Housing are not included. Feature: (2) Adjustable bar hangers with captive nails (2) Hanger Brackets for NSW-800 Compatible Housing: NSW-800 - Wet Location Housing for Brick LED Step Lights Compatible Fixtures: NSW-841: Brick LED Step Light with Louvered Face Plate NSW-841/AM: Turtle-Friendly Brick LED Step Light with Louvered Face Plate NSW-842: Brick LED Step Light with Lensed Face Plate NSW-843: Brick LED Step Light with Shroud Face Plate NSW-843/AM: Turtle-Friendly Brick LED Step Light with Shroud Face Plate - [NSW-800](https://noralighting.com/product/nsw-800/) - IP65 rated aluminum housing for LED step lights. Optional adjustable bar hanger kit (NRA-6301), ordered separately. Finish: Black Compatible Fixtures: NSW-841: Brick LED Step Light with Louvered Face Plate NSW-841/AM: Turtle-Friendly Brick LED Step Light with Louvered Face Plate NSW-842: Brick LED Step Light with Lensed Face Plate NSW-843: Brick LED Step Light with Shroud Face Plate NSW-843/AM: Turtle-Friendly Brick LED Step Light with Shroud Face Plate Listings: cULus classified for Wet Location IP65 Rated - [NSW-843/AM](https://noralighting.com/product/nsw-843-am/) - Turtle-friendly step lights minimize negative impacts of artificial lighting on sea turtles and other wildlife near coastal areas. Longer amber wavelength light meets guidelines set forth by the Florida Fish and Wildlife Conservation Commission. Durable cast zinc-magnesium face plates available in three finishes to match almost any decor. Input Voltage: 100-277V Lumens / Wattage: 12lm / 4.6W LED: 595nm Amber LED Light Finish: Brushed Nickel, Bronze or White Housing: NSW-800 required - [NSW-841/AM](https://noralighting.com/product/nsw-841-am/) - Turtle-friendly step lights minimize negative impacts of artificial lighting on sea turtles and other wildlife near coastal areas. Longer amber wavelength light meets guidelines set forth by the Florida Fish and Wildlife Conservation Commission. Durable cast zinc-magnesium face plates available in three finishes to match almost any decor. Input Voltage: 100-277V Lumens / Wattage: 12lm / 4.6W LED: 595nm Amber LED Light Finish: Brushed Nickel, Bronze or White Housing: NSW-800 required - [NSW-644/AM](https://noralighting.com/product/nsw-644-am/) - Turtle-friendly step lights minimize negative impacts of artificial lighting on sea turtles and other wildlife near coastal areas. Longer amber wavelength light meets guidelines set forth by the Florida Fish and Wildlife Conservation Commission. Input Voltage: 100-277VAC Lumens / Wattage: 6lm / 2.8W LED: 595nm Amber LED Light Finish: Brushed Nickel, Bronze or White - [NSW-641/AM](https://noralighting.com/product/nsw-641-am/) - Turtle-friendly step lights minimize negative impacts of artificial lighting on sea turtles and other wildlife near coastal areas. Longer amber wavelength light meets guidelines set forth by the Florida Fish and Wildlife Conservation Commission. Input Voltage: 100-277VAC Lumens / Wattage: 6lm / 2.8W LED: 595nm Amber LED Light Finish: Brushed Nickel, Bronze or White - [NJCB-09](https://noralighting.com/product/njcb-09/) - IC rated driver box with dimmable driver and includes a 16.5" quick connect wire for easy installation. Iolite can-less driver boxes require a compatible LED module and trim. Compatible LED module: NIOC-1LED Compatible trims: NIOC-1RNB, NIOC-1RNG, NIOC-1SNG Input Voltage: 120VAC Wattage: 9W Dimming: Triac or ELV Accessories: NCA-EW-4: 4' Quick Connect Extension Cable NCA-EW-10: 10' Quick Connect Extension Cable - [NFRC-EW-20](https://noralighting.com/product/nfrc-ew-20/) - Extension cables extend the length between the luminaire and the driver enclosure. They can be connected together to create custom lengths. Length: 20 feet Compatible Luminaires: NFRC-R4W1TW: 4″ Fire Rated Flat LED Downlight NFRC-R4W2TW: 4″ Fire Rated Baffle LED Downlight NFRC-R4W3TW: 4″ Fire Rated Regressed LED Downlight NFRC-R6W1TW: 6″ Fire Rated Flat LED Downlight NFRC-R6W2TW: 6″ Fire Rated Baffle LED Downlight NFRC-R6W3TW: 6″ Fire Rated Regressed LED Downlight - [NFRC-EW-4](https://noralighting.com/product/nfrc-ew-4/) - Extension cables extend the length between the luminaire and the driver enclosure. They can be connected together to create custom lengths. Length: 4 feet Compatible Luminaires: NFRC-R4W1TW: 4″ Fire Rated Flat LED Downlight NFRC-R4W2TW: 4″ Fire Rated Baffle LED Downlight NFRC-R4W3TW: 4″ Fire Rated Regressed LED Downlight NFRC-R6W1TW: 6″ Fire Rated Flat LED Downlight NFRC-R6W2TW: 6″ Fire Rated Baffle LED Downlight NFRC-R6W3TW: 6″ Fire Rated Regressed LED Downlight - [NUTP81](https://noralighting.com/product/nutp81/) - 24V Continuous High Output LED tape provides bright even illumination at 450 lumens per foot. Available in dedicated CCT options and producing a crisp clear 90+ CRI color. The LEDs are spaced evenly apart and tape can be cut every 4'. Optional accessories, channels, and drivers make Nora’s Continuous Hy-Brite LED tape excellent for small or large jobs. A terrific solution for use in cove, undercabinet, toe-kick, cabinet, back-light, and accent applications. Features · 24V system – requires Class 2 LED driver · Field cuttable every 4' and connectable with accessories · Roll includes: Tape light, power feed with DC connector, mounting clips and screws · Easy to install with pre-applied adhesive tape or clips · No soldering required Length: 16' or 100' Input Voltage: 24V Lumens / Wattage: 450lm / 6.5W per foot Color Temperature: 2700K, 3000K, or 4200K Color Rendering Index: 90+ CRI Power Cords: NATLCFC-608/3A: 3" Hardwire Power Cord NATLCFC-609/3A: 3" Power Cord with DC connector NATLCFC-608/12A: 12" Hardwire Power Cord NATLCFC-608/48A: 48" Hardwire Power Cord NATLCFC-608/96A: 96" Hardwire Power Cord Connectors: NATLCFC-606A: 6" Linking Cable NATLCFC-612A: 12" Linking Cable NATLCFC-624A: 24" Linking Cable NATLCFC-648A: 48" Linking Cable NATLCFC-672A: 72" Linking Cable NATLCFC-696A: 96" Linking Cable Channels: NATL-C23: 4' Shallow Recessed Channel NATL-C24: 4' Shallow Channel NATL-C25: 4' Deep Recessed Channel NATL-C26: 4' Deep Channel NATL-C27: 4' J-Style Channel NATL-C28: 4' Corner Channel NATHR-680: 4' Channel without Lens NATHR-685: Clear Mounting Clips 24V Drivers: NATL-524W: 120V/24V 24W Plug-In Driver NATL-545W: 120V/24V 45W Plug-In Driver NATL-596W: 120V/24V 96W Plug-In Driver NPSU-60W/24: 110-277V/24V 60W Universal Dimming Driver NPSU-96W/24: 110-277V/24V96W Universal Dimming Driver NPSU-3X96W/24: 110-277V/24V 3x96W Universal Dimming Driver NMT-48/24C2D1: 120V/24V 48W MLV Dimmable Driver NMT-303/24C2D1: 120V/24V 3x100W MLV Dimmable Driver NMT-303/24C2D2: 277V/24V 3x100W MLV Dimmable Driver NMTD-60/24D: 120-277V/24V 60W MLV Dimmable Driver with Regulator NMTD-96/24D: 120-277V/24V 96W MLV Dimmable Driver with Regulator NATL-SWEX60/24A: 120V/24V 60W NEXUS All-in-One Driver and Dimmer NATL-SWEX100/24A: 120V/24V 100W NEXUS All-in-One Driver and Dimmer - [NUTP51](https://noralighting.com/product/nutp51/) - *** While Supplies Last *** 24V Continuous Hy-Brite LED tape provides bright even illumination at 375 lumens per foot. Available in dedicated CCT options and producing a crisp clear 90+ CRI color. The LEDs are spaced evenly apart and tape can be cut every 4'. Optional accessories, channels, and drivers make Nora’s Continuous Hy-Brite LED tape excellent for small or large jobs. A terrific solution for use in cove, undercabinet, toe-kick, cabinet, back-light, and accent applications. Features · 24V system – requires Class 2 LED driver · Field cuttable every 4' and connectable with accessories · Roll includes: Tape light, power feed with DC connector, mounting clips and screws · Easy to install with pre-applied adhesive tape or clips · No soldering required Length: 20' or 100' Input Voltage: 24V Lumens / Wattage: 375lm / 4.25W per foot Color Temperature: 4200K Color Rendering Index: 90+ CRI Power Cords: NATLCFC-608/3A: 3" Hardwire Power Cord NATLCFC-609/3A: 3" Power Cord with DC connector NATLCFC-608/12A: 12" Hardwire Power Cord NATLCFC-608/48A: 48" Hardwire Power Cord NATLCFC-608/96A: 96" Hardwire Power Cord Connectors: NATLCFC-606A: 6" Linking Cable NATLCFC-612A: 12" Linking Cable NATLCFC-624A: 24" Linking Cable NATLCFC-648A: 48" Linking Cable NATLCFC-672A: 72" Linking Cable NATLCFC-696A: 96" Linking Cable Channels: NATL-C23: 4' Shallow Recessed Channel NATL-C24: 4' Shallow Channel NATL-C25: 4' Deep Recessed Channel NATL-C26: 4' Deep Channel NATL-C27: 4' J-Style Channel NATL-C28: 4' Corner Channel NATHR-680: 4' Channel without Lens NATHR-685: Clear Mounting Clips 24V Drivers: NATL-524W: 120V/24V 24W Plug-In Driver NATL-545W: 120V/24V 45W Plug-In Driver NATL-596W: 120V/24V 96W Plug-In Driver NPSU-60W/24: 110-277V/24V 60W Universal Dimming Driver NPSU-96W/24: 110-277V/24V96W Universal Dimming Driver NPSU-3X96W/24: 110-277V/24V 3x96W Universal Dimming Driver NMT-48/24C2D1: 120V/24V 48W MLV Dimmable Driver NMT-303/24C2D1: 120V/24V 3x100W MLV Dimmable Driver NMT-303/24C2D2: 277V/24V 3x100W MLV Dimmable Driver NMTD-60/24D: 120-277V/24V 60W MLV Dimmable Driver with Regulator NMTD-96/24D: 120-277V/24V 96W MLV Dimmable Driver with Regulator NATL-SWEX60/24A: 120V/24V 60W NEXUS All-in-One Driver and Dimmer NATL-SWEX100/24A: 120V/24V 100W NEXUS All-in-One Driver and Dimmer - [NATLCFC-606A](https://noralighting.com/product/natlcfc-606a/) - A 6" linking cable connects two Continuous LED tape lights. Flip-type connector allows tape light to clamp without any tools needed. Compatible: 24V Continuous Hy-Brite LED Tape Light (NUTP51) 24V Continuous High Output LED Tape Light (NUTP81) - [NATLCFC-696A](https://noralighting.com/product/natlcfc-696a/) - A 96" linking cable connects two Continuous LED tape lights. Flip-type connector allows tape light to clamp without any tools needed. Compatible: 24V Continuous Hy-Brite LED Tape Light (NUTP51) 24V Continuous High Output LED Tape Light (NUTP81) - [NTS-615](https://noralighting.com/product/nts-615/) - Reflector Finish: White Flange Finish: White Lamp: 100W max. Compatible Housings: NHIC-926QAT: 6" Sloped IC Air-Tight New Construction Housing (75W BR30/PAR30 max.) NHRIC-926QAT: 6" Sloped IC Air-Tight Remodel Housing (75W BR30/PAR30 max.) NHIC-926DWQAT: 6" Sloped IC Air-Tight Double Wall Housing (100W BR40/PAR38 max.) - [NFC-R430](https://noralighting.com/product/nfc-r430/) - New construction frame-in with collar for pre-wiring and easier layout planning. Dimensions: 11.94" x 7.68" Compatible Fixtures: NCSC-R4D1TW: 4" Contractor Series Deep Downlight NCSC-R4W2TW: 4" Contractor Series Wafer Downlight NEFLINTW-R4: 4" FLIN Wafer Downlight with Selectable CCT NFLAT-R4TW: 4" FLAT Wafer Downlight with Selectable CCT NFLINA-R4TW: 4" FLIN Adjustable Wafer with Selectable CCT NFRC-R4W1TW: 4″ Fire Rated Flat LED Downlight NFRC-R4W2TW: 4″ Fire Rated Baffle LED Downlight NFRC-R4W3TW: 4″ Fire Rated Regressed LED Downlight NIOC-4RSP: 4" Iolite Can-less Round Sloped Ceiling NLTH-41TW: 4" Theia LED Downlight with Selectable CCT NM4-R470: 4" M4 LED Adjustable Elbow NM4-RG: 4" M4 LED Adjustable Gimbal - [NF-R246](https://noralighting.com/product/nf-r246/) - Universal new construction frame-in can be used to assist installing can-less recessed downlighting. Helps indicate wiring location and cutting guide. Includes multiple cut outs for 2", 4" and 6" LED luminaires. Compatible Luminaires: NCSC-R4D1TW: 4" Contractor Series Can-less Deep Downlight NCSC-R4W2TW: 4" Contractor Series Can-less Wafer Downlight NCSC-R6W2TW: 6" Contractor Series Can-less Wafer Downlight NEFLINTW-R4: 4" FLIN Wafer LED Downlight NEFLINTW-R6: 6" FLIN Wafer LED Downlight NFLAT-R4TW: 4" FLAT Non-Metallic LED Downlight NFLAT-R6TW: 6" FLAT Non-Metallic LED Downlight NFLINA-R4TW: 4" FLIN Adjustable LED Downlight NFLINA-R6TW: 6" FLIN Adjustable LED Downlight NFRC-R4W1TW: 4" Fire Rated Flat LED Downlight NFRC-R4W2TW: 4" Fire Rated Baffle LED Downlight NFRC-R4W3TW: 4" Fire Rated Regressed LED Downlight NFRC-R6W1TW: 6" Fire Rated Flat LED Downlight NFRC-R6W2TW: 6" Fire Rated Baffle LED Downlight NFRC-R6W3TW: 6" Fire Rated Regressed LED Downlight NLTH-41TW: 4" Theia LED Downlight NLTH-61TW: 6" Theia LED Downlight NM2-2RDC: 2" M2 LED Round Downlight NM2-2RDCS: 2" M2 LED Round Lensed Downlight NM2-2RTLDC: 2" M2 LED Trimless Round Downlight NM2-2RG: 2" M2 LED Round Adjustable Gimbal NM2-2R270: 2" M2 LED Round Adjustable Elbow NM2-2SB: 2" M2 LED Square Baffle NM2-2SDC: 2" M2 LED Square Downlight NM4-RG: 4" M4 LED Round Adjustable Gimbal NM4-R470: 4" M4 LED Round Adjustable Elbow - [NIOC-4RNDC](https://noralighting.com/product/nioc-4rndc/) - 4" Deep regressed cone reflectors optimize visual cut-off. Iolite can-less trims require a compatible LED module and driver box. Compatible LED module: NIOC-24LED Compatible Driver Box: NJCB-12 Finishes: BB: Black Reflector / Black Flange HZMPW: Haze Reflector / Bright White Flange MPW: Bright White Reflector / Bright White Flange WW: Warm White Reflector / Warm White Flange Accessories: NIO-AS: Translucent/Opaque Deco Collars NIO-HC: Hex Louver NF-R124: Universal New Construction Frame-In NFC-R413: New Construction Frame-In with Collar - [NT-40](https://noralighting.com/product/nt-40/) - 6" R40/PAR38 Open Metal Trim rated up to 150W max. Compatible Housings: NH-26Q: Non-IC New Construction (Rated up to 150W) NHR-26Q: Non-IC Remodel (Rated up to 150W) NHIC-17/100DWQA: IC AT Double Wall New Construction (Rated up to 100W) NH-27Q: Shallow Non-IC New Construction (Rated up to 150W) NHR-27Q: Shallow Non-IC New Construction (Rated up to 150W) Mounting: Coil Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTLE-865](https://noralighting.com/product/ntle-865/) - The track pack comes complete and ready to install with mounting hardware and track heads. Components include (1) 4’ single circuit track, (2) end caps, (1) floating canopy feed, and (3 or 4) 2450lm MAX LED track heads. The practical style fits almost any design criteria. Input Voltage: 120V Finish: Black or White Lumens / Wattage Per Head: Up to 2450lm / 25W Color Temperature: 2700K, 3000K, 3500K or 4000K Color Rendering Index: 90+ CRI Beam Spread: 20° Spot, 32° Narrow Flood or 54° Flood Included: NT-302 (4' Track) NT-307 (Floating Canopy Feed) NT-318 (Dead End Caps) NTE-865 (MAX LED Track Heads) - [NTLE-864](https://noralighting.com/product/ntle-864/) - The track pack comes complete and ready to install with mounting hardware and track heads. Components include (1) 4’ single circuit track, (2) end caps, (1) floating canopy feed, and (3 or 4) 1000lm MAX Mini LED track heads. The practical style fits almost any design criteria. Input Voltage: 120V Finish: Black or White Lumens / Wattage Per Head: Up to 1000lm / 13W Color Temperature: 2700K, 3000K, 3500K or 4000K Color Rendering Index: 90+ CRI Beam Spread: 41° Narrow Flood Included: NT-302 (4' Track) NT-307 (Floating Canopy Feed) NT-318 (Dead End Caps) NTE-864 (MAX Mini LED Track Heads) - [NOX-436](https://noralighting.com/product/nox-436/) - ** While Supplies Last: Replacement Item: NOXAC-436 ** Onyx Retrofit Series is suitable for use with most 4" recessed housings. Die-cast aluminum construction provides clean sharp edges. Deep regressed optics and round aperture delivers even and glare-free illumination. Available in multiple color temperatures and 90+ CRI. Features: Integral dimmable driver Includes medium base socket adapter for easy retrofitting in 4" recessed housings Quick connector is compatible with dedicated LED housings. Required by some codes in recessed can applications or to meet energy rebate program requirements Lumens / Wattage: 700lm / 10.5W Color Temperature: 3000K Finish: Black Reflector / White Flange Dimming: Triac or ELV - [NOX-431](https://noralighting.com/product/nox-431/) - ** While Supplies Last: Replacement Item: NOXAC-431 ** Onyx Retrofit Series is suitable for use with most 4" recessed housings. Die-cast aluminum construction provides clean sharp edges. Deep regressed optics and round aperture delivers even and glare-free illumination. Available in multiple color temperatures and 90+ CRI. Features: Integral dimmable driver Recessed mount into 4" housing. Includes medium base socket adaptor for easy retrofitting in 4" recessed housings Quick connector is compatible with Nora NHIC -4LMRAT and NHRIC-4LMRAT dedicated LED housings. Required by some codes in recessed can applications or to meet energy rebate program requirements Lumens / Wattage: 650lm / 10.5W or 900lm / 14.5W Color Temperature: 2700K or 5000K Accessories: NOX-4EYELID: 4" Round Eyelid for Onyx NOX-4OR-W: 4" Round Oversize Ring for Onyx NRA-212SM: GU24 Socket Adapter - [NTE-LIN4TW](https://noralighting.com/product/nte-lin4tw/) - 4' T-Line LED linear track heads allows the end user to select between 3000K, 3500K or 4000K at the time of installation with a 3 position switch. Luminaire runs parallel to the track for a uniform appearance and bright illumination up to 3200 lumens. Each luminaire includes a diffused lens for glare control and even illumination. Optional asymmetric and double asymmetric lenses make the T-Line an excellent solution for wall washing, sign and aisle lighting. Add the optional visor to conceal the light source when using the asymmetrical lens. An exceptional product for retail, commercial and hospitality applications. FEATURES Selectable CCT (3000K / 3500K / 4000K) Integral dimmable driver Die-cast aluminum construction Symmetrical frosted lens included, asymmetrical lenses available 5-Year limited warranty Length: 44-3/4" Lumens / Wattage: 3200lm / 38W Color Temperature: Selectable CCT (3000K / 3500K / 4000K) Finish: Black or White Lens: Symmetrical included NTE-LIN4SASYLENS: Asymmetric lens used to change the light distribution towards a single wall wash NTE-LIN4DASYLENS: Double asymmetric lens used to change the light distribution towards two opposite walls Accessory: NTE-LIN4VIS: Visor accessory to cover luminaire and direct light towards a wall - [NTE-LIN2TW](https://noralighting.com/product/nte-lin2tw/) - 2' T-Line LED linear track heads allows the end user to select between 3000K, 3500K or 4000K at the time of installation with a 3 position switch. Luminaire runs parallel to the track for a uniform appearance and bright illumination up to 3200 lumens. Each luminaire includes a diffused lens for glare control and even illumination. Optional asymmetric and double asymmetric lenses make the T-Line an excellent solution for wall washing, sign and aisle lighting. Add the optional visor to conceal the light source when using the asymmetrical lens. An exceptional product for retail, commercial and hospitality applications. FEATURES Selectable CCT (3000K / 3500K / 4000K) Integral dimmable driver Die-cast aluminum construction Symmetrical frosted lens included, asymmetrical lenses available 5-Year limited warranty Length: 22-1/2" Lumens / Wattage: 1600lm / 20W Color Temperature: Selectable CCT (3000K / 3500K / 4000K) Finish: Black, Silver or White Lens: Symmetrical included NTE-LIN2SASYLENS: Asymmetric lens used to change the light distribution towards a single wall wash NTE-LIN2DASYLENS: Double asymmetric lens used to change the light distribution towards two opposite walls Accessory: NTE-LIN2VIS: Visor accessory to cover luminaire and direct light towards a wall - [NT-380](https://noralighting.com/product/nt-380/) - *** While Supplies Last *** A round canopy is used to cover a junction box and power a track head with a double locking adapter. Input Voltage: 120V Dimming: Triac or ELV Finish: Black Compatible Track Heads: NTE-855: Jason Round Track Head NTE-880315: 8" Dipper Track Head NTE-880330: 12" Dipper Track Head NTH-920: Architectural Cylinder Line Voltage PAR20 Track Head NTH-930: Architectural Cylinder Line Voltage PAR30 Track Head - [NTE-855FG](https://noralighting.com/product/nte-855fg/) - Frosted glass replaces clear glass included with Jason LED Track Heads. Features Replacement glass (track heads include clear glass) Compatible with Jason LED Track Heads No accessory holder required Finish: Frosted Compatible Track Head: NTE-855: Jason Round LED Track Head - [NTE-855SNWW](https://noralighting.com/product/nte-855snww/) - Directional shield accessory for Jason LED Track Heads. No accessory holder is required. Directs light to desired location. Features Directs light in desired location Compatible with Jason LED Track Heads No accessory holder required Finish: Black Compatible Track Head: NTE-855: Jason Round LED Track Head - [NTE-855HC](https://noralighting.com/product/nte-855hc/) - Honeycomb louver accessory for Jason LED Track Heads. Diffuses the light and will also lower delivered lumens. No accessory holder is required and replaces clear glass included with fixtures. Features Reduces glare and output Compatible with Jason LED Track Heads No accessory holder required Finish: Black Compatible Track Head: NTE-855: Jason Round LED Track Head - [NTE-855SN](https://noralighting.com/product/nte-855sn/) - Snoot accessory for Jason LED Track Heads. No accessory holder is required. Focuses light to desired location. Features Reduces glare and output Compatible with Jason LED Track Heads No accessory holder required Finish: Black Compatible Track Head: NTE-855: Jason Round LED Track Head - [NHSIC-4](https://noralighting.com/product/nhsic-4/) - Shallow specification grade new construction housing that is only 2-5/8" tall. The housing is ideal for multi-family and residential applications. The driver is completely accessible from below the ceiling with a patent pending design. Features - Shallow 2-5/8” height - Complete access to the driver from below the ceiling - Adjustable collar for up to 1-1/2” ceiling thickness - 5-Year limited warranty - cULus listed for wet locations when used with compatible trims - Patented, see noralighting.com/patents Compatible Trims: NLCBS-453 - 4" Square Reflector with Round Aperture NLCBS-456 - 4" Square Reflector with Square Aperture NLCBS-4W51 - 4" Round Reflector NLCBS-4W52 - 4" Round Baffle Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch - [NT-366](https://noralighting.com/product/nt-366/) - Round monopoint canopy allows any line voltage track head to be mounted as a monopoint fixture. For use with any line voltage track head Mounts directly over an outlet box Input Voltage: 120V, 60Hz, 20A max. Dimming: Triac or ELV Finish: Black, Silver, or White Compatible Track Heads: NTE-845: Aiden LED Track Head, 1400lm NTE-860: MAY LED Track Head, 850lm NTE-864: MAX Mini LED Track Head, 1000lm NTE-865: MAX LED Track Head, 2450lm NTE-866: MAX XL LED Track Head, 3650lm NTE-870: MAC LED Track Head, 800lm NTE-875: MAC XL LED Track Head, 1250lm NTZ: Z-Track Head with Selectable CCT & Adjustable Beam Spread, 1550lm - [NT-319](https://noralighting.com/product/nt-319/) - Square monopoint canopy allows any line voltage track head to be mounted as a monopoint fixture. For use with any line voltage track head Mounts directly over an outlet box Input Voltage: 120V, 60Hz, 20A max. Dimming: Triac or ELV Finish: Black, Silver, or White Compatible Track Heads: NTE-845: Aiden LED Track Head, 1400lm NTE-860: MAY LED Track Head, 850lm NTE-864: MAX Mini LED Track Head, 1000lm NTE-865: MAX LED Track Head, 2450lm NTE-866: MAX XL LED Track Head, 3650lm NTE-870: MAC LED Track Head, 800lm NTE-875: MAC XL LED Track Head, 1250lm NTZ: Z-Track Head with Selectable CCT & Adjustable Beam Spread, 1550lm - [NFJB-R4S](https://noralighting.com/product/nfjb-r4s/) - Dedicated new construction housing for use in insulated ceilings can be in direct contact with insulation. Powder-coated steel housing meets a 2-hour fire rating per the International Building Code section 714 for 1-hour and 2-hour fire-rated assemblies. Air-tight construction provides energy savings by reducing the flow of air through the ceiling. The housing is labeled for use with LED downlights or as an outlet box. Input Voltage: 120/277VAC Clearance: IC Air-Tight Compatible Surface Mounts: NELO: ELO LED Surface Mounts NLOPAC: Opal LED Surface Mounts NLOS: Surf LED Surface Mounts with Regressed Baffle NSLIM: Slim LED Surface Mounts NWELO: wELO LED Surface Mounts NYLM: iLENE LED Cylinders - [NFJB-R4CPA](https://noralighting.com/product/nfjb-r4cpa/) - Cover Plate for 4" IC Airtight Junction Box Recessed Housing. Includes mounting hardware and screws to cover an unused outlet box. Compatible Outlet Box: NFJB-R4: 4" IC Airtight Junction Box Housing for Fire Rated Applications - [NLOPAC-R6T24](https://noralighting.com/product/nlopac-r6t24/) - ** While Supplies Last: Replacement Item: NLOPAC-R6509T24 ** The AC Opal LED Series LED fixture is designed to surface mount over a standard junction box. The low profile dimmable luminaire produces even illumination and is cULus listed for wet locations. T24 series can be used to comply with 2019 Title 24 - part 6 High Efficacy LED light source requirements. Features: 4", 6" and 8" sizes AC LED (No Driver) Dimmable Mount on standard 4" junction box Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 1050lm / 16W Color Temperature: 2700K Color Rendering Index: 90+ CRI Finish: Bronze Optional Accessories: NLOPAC-56RECKIT-2 = Retrofit Kit for mounting on 5" or 6" recessed housings NLOPAC-4BKT-2 = Universal Bracket for mounting on 3" or 4" junction boxes - [NCR3-88](https://noralighting.com/product/ncr3-88/) - The Sapphire III COB Retrofit Series is an architectural-grade LED high-lumen replacement. Using existing commercial or architectural frame-ins, replace old light sources and reflectors with the latest LED technology. Each luminaire includes a flexible conduit and a junction box with dimmable drivers. The Sapphire III COB Series is an architectural-grade LED high-lumen downlight. The Sapphire III uses the latest COB technology by Signify®. The COB allows for better optic control offering 3 beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. The reflectors have been designed for high efficiency (LPW) while providing low aperture brightness. FEATURES Retrofit existing architectural or commercial frame-ins with the latest LED technology Over 80% energy savings when compared to incandescent Signify® COB technology Specifiable beam spreads Lumens / Wattage: Up to 5500lm / 60W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Decorative Glass (Ordered Separately): Up to two glasses can be used per luminaire NTG-8B/80 (8" Tempered Blue Glass with 3-1/8" Open Center) NTG-8CF (8" Tempered Clear Glass with Frosted Center) NTG-8FC (8" Tempered Frosted Glass with Clear Center) Emergency: Luminaire is compatible with NEPK-07LEDUNV (ordered separately) Listing: - Assembled in the USA with domestic and foreign components - cULus classified for Wet Location - ENERGY STAR certified - 5-Year Limited Warranty - [NCR3-81](https://noralighting.com/product/ncr3-81/) - The Sapphire III COB Retrofit Series is an architectural-grade LED high-lumen replacement. Using existing commercial or architectural frame-ins, replace old light sources and reflectors with the latest LED technology. Each luminaire includes a flexible conduit and a junction box with dimmable drivers. The Sapphire III COB Series is an architectural-grade LED high-lumen downlight. The Sapphire III uses the latest COB technology by Signify®. The COB allows for better optic control offering 3 beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. The reflectors have been designed for high efficiency (LPW) while providing low aperture brightness. FEATURES Retrofit existing architectural or commercial frame-ins with the latest LED technology Over 80% energy savings when compared to incandescent Signify® COB technology Specifiable beam spreads Lumens / Wattage: Up to 5500lm / 60W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Emergency: Luminaire is compatible with NEPK-07LEDUNV (ordered separately) Listing: - Assembled in the USA with domestic and foreign components - cULus classified for Wet Location when used with compatible frame-in - ENERGY STAR certified - 5-Year Limited Warranty - [NC3-88](https://noralighting.com/product/nc3-88/) - Sapphire III series is an architectural grade LED high-lumen downlight available in 4", 6", and 8" deep cone reflectors that provide over 55º cut-off with even illumination for visual comfort. The Sapphire III uses the latest COB technology by Signify®. The COB allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. The Sapphire III series is available in new construction, remodel, and retrofit configurations. Lumens / Wattage: Up to 5500lm / 60W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Decorative Glass (Ordered Separately): Up to two glasses can be used per luminaire NTG-8B/80 (8" Tempered Blue Glass with 3-1/8" Open Center) NTG-8CF (8" Tempered Clear Glass with Frosted Center) NTG-8FC (8" Tempered Frosted Glass with Clear Center) Compatible Frame-Ins: The reflector is only compatible with Sapphire III frame-ins manufactured by Nora Lighting. NCH3-8 (8" Universal New Construction Frame-In) NCHR3-8 (8" Remodel Frame-In) Emergency: Reflector is compatible with a remote test switch Listing: - Assembled in the USA with domestic and foreign components - cULus Listed for Wet Location when used with compatible frame-in - ENERGY STAR certified - 5-Year Limited Warranty - [NC3-89](https://noralighting.com/product/nc3-89/) - Adjustable Sapphire III COB Series is a commercial-grade LED high-lumen downlight used to aim. The Sapphire III uses the latest COB technology by Signify®, which allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. The reflectors have been designed for high efficiency (LPW) while providing low aperture brightness. FEATURES • Adjustable mechanism tilts up to 35° with 359° rotation • Locking vertical aiming • Adjustable from below the ceiling • Angle cut reflectors for maximum performance and lower aperture brightness • Signify® COB with spot, narrow flood or flood beam spreads Lumens / Wattage: Up to 4500lm / 46W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Compatible Housings: The reflector is only compatible with Sapphire III housings manufactured by Nora Lighting. NCHAIC3-8 (6" IC New Construction Housing) NCHA3-8 (8" Non-IC New Construction Housing) Listing: - Assembled in the USA with domestic and foreign components - cULus Listed for Damp Location when used with compatible housing - ENERGY STAR certified - 5-Year Limited Warranty - [NC3-81](https://noralighting.com/product/nc3-81/) - Sapphire III series is an architectural grade LED high-lumen downlight available in 4", 6", and 8" deep cone reflectors that provide over 55º cut-off with even illumination for visual comfort. The Sapphire III uses the latest COB technology by Signify®. The COB allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. The Sapphire III series is available in new construction, remodel, and retrofit configurations. Lumens / Wattage: Up to 5500lm / 60W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Compatible Frame-Ins: The reflector is only compatible with Sapphire III frame-ins manufactured by Nora Lighting. NCH3-8 (8" Universal New Construction Frame-In) NCHR3-8 (8" Remodel Frame-In) Emergency: Reflector is compatible with an integral test switch or a remote test switch Listing: - Assembled in the USA with domestic and foreign components - cULus Listed for Wet Location when used with a compatible frame-in - ENERGY STAR certified - 5-Year Limited Warranty - [NCR3-66](https://noralighting.com/product/ncr3-66/) - The Sapphire III COB Retrofit Series is an architectural-grade LED high-lumen replacement. Using existing commercial or architectural frame-ins, replace old light sources and reflectors with the latest LED technology. Each luminaire includes a flexible conduit and a junction box with dimmable drivers. The Sapphire III COB Series is an architectural-grade LED high-lumen downlight. The Sapphire III uses the latest COB technology by Signify®. The COB allows for better optic control offering 3 beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. The reflectors have been designed for high efficiency (LPW) while providing low aperture brightness. FEATURES Retrofit existing architectural or commercial frame-ins with the latest LED technology Over 80% energy savings when compared to incandescent Signify® COB technology Specifiable beam spreads Lumens / Wattage: Up to 4500lm / 46W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Emergency: Luminaire is compatible with NEPK-07LEDUNV (ordered separately) Listing: - Assembled in the USA with domestic and foreign components - cULus classified for Wet Location - ENERGY STAR certified - 5-Year Limited Warranty - [NCR3-61](https://noralighting.com/product/ncr3-61/) - The Sapphire III COB Retrofit Series is an architectural-grade LED high-lumen replacement. Using existing commercial or architectural frame-ins, replace old light sources and reflectors with the latest LED technology. Each luminaire includes a flexible conduit and a junction box with dimmable drivers. The Sapphire III COB Series is an architectural-grade LED high-lumen downlight. The Sapphire III uses the latest COB technology by Signify®. The COB allows for better optic control offering 3 beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. The reflectors have been designed for high efficiency (LPW) while providing low aperture brightness. FEATURES Retrofit existing architectural or commercial frame-ins with the latest LED technology Over 80% energy savings when compared to incandescent Signify® COB technology Specifiable beam spreads Lumens / Wattage: Up to 5500lm / 60W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Emergency: Luminaire is compatible with NEPK-07LEDUNV (ordered separately) Listing: - Assembled in the USA with domestic and foreign components - cULus classified for Wet Location when used with compatible frame-in - ENERGY STAR certified - 5-Year Limited Warranty - [NC3-48](https://noralighting.com/product/nc3-48/) - Sapphire III series is an architectural grade LED high-lumen downlight available in 4", 6", and 8" deep cone reflectors that provide over 55º cut-off with even illumination for visual comfort. The Sapphire III uses the latest COB technology by Signify®. The COB allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. The Sapphire III series is available in new construction, remodel, and retrofit configurations. Lumens / Wattage: Up to 3500lm / 38W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Decorative Glass (Ordered Separately): Up to two glasses can be used per luminaire NTG-4SPH-HC (4" Tempered Clear Glass with Frosted Center and 3-1/8" Open Center) Compatible Frame-Ins: The reflector is only compatible with Sapphire III frame-ins manufactured by Nora Lighting. NCH3-4 (4" Universal New Construction Frame-In) NCHR3-4 (4" Remodel Frame-In) Emergency: Reflector is compatible with a remote test switch Listing: - Assembled in the USA with domestic and foreign components - cULus Listed for Wet Location when used with compatible frame-in - ENERGY STAR certified - 5-Year Limited Warranty - [NC3-46](https://noralighting.com/product/nc3-46/) - Sapphire III series is an architectural grade LED high-lumen downlight available in 4", 6", and 8" deep cone reflectors that provide over 55º cut-off with even illumination for visual comfort. The Sapphire III uses the latest COB technology by Signify®. The COB allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. The Sapphire III series is available in new construction, remodel, and retrofit configurations. Lumens / Wattage: Up to 3500lm / 38W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Compatible Frame-Ins: The reflector is only compatible with Sapphire III frame-ins manufactured by Nora Lighting. NCH3-4 (4" Universal New Construction Frame-In) NCHR3-4 (4" Remodel Frame-In) Emergency: Reflector is compatible with a remote test switch Listing: - Assembled in the USA with domestic and foreign components - cULus Listed for Wet Location when used with compatible frame-in - ENERGY STAR certified - 5-Year Limited Warranty - [NC3-66](https://noralighting.com/product/nc3-66/) - Sapphire III series is an architectural grade LED high-lumen downlight available in 4", 6", and 8" deep cone reflectors that provide over 55º cut-off with even illumination for visual comfort. The Sapphire III uses the latest COB technology by Signify®. The COB allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. The Sapphire III series is available in new construction, remodel, and retrofit configurations. Lumens / Wattage: Up to 4500lm / 46W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Compatible Frame-Ins: The reflector is only compatible with Sapphire III frame-ins manufactured by Nora Lighting. NCH3-6 (6" Universal New Construction Frame-In) NCHR3-6 (6" Remodel Frame-In) Emergency: Reflector is compatible with a remote test switch Listing: - Assembled in the USA with domestic and foreign components - cULus Listed for Wet Location when used with compatible frame-in - ENERGY STAR certified - 5-Year Limited Warranty - [NC3-69](https://noralighting.com/product/nc3-69/) - Adjustable Sapphire III COB Series is a commercial-grade LED high-lumen downlight used to aim. The Sapphire III uses the latest COB technology by Signify®, which allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. The reflectors have been designed for high efficiency (LPW) while providing low aperture brightness. FEATURES • Adjustable mechanism tilts up to 35° with 359° rotation • Locking vertical aiming • Adjustable from below the ceiling • Angle cut reflectors for maximum performance and lower aperture brightness • Signify® COB with spot, narrow flood or flood beam spreads • Assembled in the USA with domestic and foreign components Lumens / Wattage: Up to 4500lm / 46W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Compatible Housings: The reflector is only compatible with Sapphire III housings manufactured by Nora Lighting. NCHAIC3-6 (6" IC New Construction Housing) NCHA3-6 (6" Non-IC New Construction Housing) Listing: - cULus Listed for Damp Location when used with compatible housing - ENERGY STAR certified - 5-Year Limited Warranty - [NC3-61](https://noralighting.com/product/nc3-61/) - Sapphire III series is an architectural grade LED high-lumen downlight available in 4", 6", and 8" deep cone reflectors that provide over 55º cut-off with even illumination for visual comfort. The Sapphire III uses the latest COB technology by Signify®. The COB allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. The Sapphire III series is available in new construction, remodel, and retrofit configurations. Lumens / Wattage: Up to 5500lm / 60W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Compatible Frame-Ins: The reflector is only compatible with Sapphire III frame-ins manufactured by Nora Lighting. NCH3-6 (6" Universal New Construction Frame-In) NCHR3-6 (6" Remodel Frame-In) Emergency: Reflector is compatible with an integral test switch or a remote test switch Listing: - Assembled in the USA with domestic and foreign components - cULus Listed for Wet Location when used with a compatible frame-in - ENERGY STAR certified - 5-Year Limited Warranty - [NC3-49](https://noralighting.com/product/nc3-49/) - Adjustable Sapphire III COB Series is a commercial-grade LED high-lumen downlight used to aim. The Sapphire III uses the latest COB technology by Signify®, which allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. The reflectors have been designed for high efficiency (LPW) while providing low aperture brightness. FEATURES • Adjustable mechanism tilts up to 35° with 359° rotation • Locking vertical aiming • Adjustable from below the ceiling • Angle cut reflectors for maximum performance and lower aperture brightness • Signify® COB with spot, narrow flood or flood beam spreads • Assembled in the USA with domestic and foreign components Lumens / Wattage: Up to 1500lm / 18W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Compatible Housing: The reflector is only compatible with Sapphire III housings manufactured by Nora Lighting. NCHAIC3-4 (4" IC New Construction Housing) Listing: - cULus Listed for Damp Location when used with compatible housing - ENERGY STAR certified - 5-Year Limited Warranty - [NC3-41](https://noralighting.com/product/nc3-41/) - Sapphire III series is an architectural grade LED high-lumen downlight available in 4", 6", and 8" deep cone reflectors that provide over 55º cut-off with even illumination for visual comfort. The Sapphire III uses the latest COB technology by Signify®. The COB allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. The Sapphire III series is available in new construction, remodel, and retrofit configurations. Lumens / Wattage: Up to 4500lm / 46W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Compatible Frame-Ins: The reflector is only compatible with Sapphire III frame-ins manufactured by Nora Lighting. NCH3-4 (4" Universal New Construction Frame-In) NCHR3-4 (4" Remodel Frame-In) Emergency: Reflector is compatible with an integral test switch or a remote test switch Listing: - Assembled in the USA with domestic and foreign components - cULus Listed for Wet Location when used with a compatible frame-in - ENERGY STAR certified - 5-Year Limited Warranty - [NHAPNIC-3S](https://noralighting.com/product/nhapnic-3s/) - 3" Apollo Square IC Air-Tight Housing with Fixed Spot Optics. Delivering up to 1500lm with TIR optics and various dimming protocols. - [NHAPNIC-3R](https://noralighting.com/product/nhapnic-3r/) - 3" Apollo Round IC Air-Tight Housing with Fixed Spot Optics. Delivering up to 1500lm with TIR optics and various dimming protocols. - [NHAP-3S](https://noralighting.com/product/nhap-3s/) - 3" Apollo Square IC Air-Tight Housing with Field Changeable Optics. Delivering up to 2000lm with TIR optics and various dimming protocols. - [NHAPIC-3S](https://noralighting.com/product/nhapic-3s/) - 3" Apollo Square IC Air-Tight Housing with Field Changeable Optics. Delivering up to 2000lm with TIR optics and various dimming protocols. - [NHAP-3R](https://noralighting.com/product/nhap-3r/) - 3" Apollo Round Non-IC Air-Tight Housing with Field Changeable Optics. Delivering up to 3000lm with TIR optics and various dimming protocols. - [NHAPIC-3R](https://noralighting.com/product/nhapic-3r/) - 3" Apollo Round IC Air-Tight Housing with Field Changeable Optics. Delivering up to 2000lm with TIR optics and various dimming protocols. - [NYLM-5SC](https://noralighting.com/product/nylm-5sc/) - iLENE Mini Cylinders are available in three sizes and lumen outputs. Using Cree COB LED technology, each iLENE includes three field changeable optics for spot, narrow flood and flood beam spreads. The optics are deep set for excellent visual comfort. The canopy mounted driver allows for cool operation and optional driver and dimming options. FEATURES Architectural die-cast aluminum construction and style Signify COB LED Technology Deep set optics Dimmable (Triac, ELV or 0-10V) Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 2800lm / 40W CCT: 2700K, 3000K, 3500K, 4000K or Comfort Dim (3100K to 2000K) Field Changeable Optics: Spot, Narrow Flood and Flood are included Mounting: Surface Mounted Finishes: Black, Silver or White Optional Remote Emergency: NEPK-07LEDUNV: 7W Emergency LED Driver with Remote Test Switch - [NYLM-5C](https://noralighting.com/product/nylm-5c/) - iLENE Mini Cylinders are available in three sizes and lumen outputs. Using Cree COB LED technology, each iLENE includes three field changeable optics for spot, narrow flood and flood beam spreads. The optics are deep set for excellent visual comfort. The canopy mounted driver allows for cool operation and optional driver and dimming options. FEATURES Architectural die-cast aluminum construction and style Signify COB LED Technology Deep set optics Dimmable (Triac, ELV or 0-10V) Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 2800lm / 40W CCT: 2700K, 3000K, 3500K, 4000K or Comfort Dim (3100K to 2000K) Field Changeable Optics: Spot, Narrow Flood and Flood are included Mounting: 8' Aircraft Cable (field adjustable) Finishes: Black, Silver or White Optional Remote Emergency: NEPK-07LEDUNV: 7W Emergency LED Driver with Remote Test Switch - [NYLM-5ST](https://noralighting.com/product/nylm-5st/) - iLENE Mini Cylinders are available in three sizes and lumen outputs. Using Cree COB LED technology, each iLENE includes three field changeable optics for spot, narrow flood and flood beam spreads. The optics are deep set for excellent visual comfort. The canopy mounted driver allows for cool operation and optional driver and dimming options. FEATURES Architectural die-cast aluminum construction and style Signify COB LED Technology Deep set optics Dimmable (Triac, ELV or 0-10V) Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 2800lm / 40W CCT: 2700K, 3000K, 3500K, 4000K or Comfort Dim (3100K to 2000K) Field Changeable Optics: Spot, Narrow Flood and Flood are included Mounting: Stem mounted, must specify length in 12" increments Finishes: Black, Silver or White Optional Remote Emergency: NEPK-07LEDUNV: 7W Emergency LED Driver with Remote Test Switch - [NFLIN-S815](https://noralighting.com/product/nflin-s815/) - Thin, regressed LED recessed luminaire designed for easy installation in new construction or remodel applications, no housing is required. FLIN includes a quick connect that allows the junction box to easily disconnect and mount in the ceiling. Junction box measures under 2" for shallow plenum ceilings where access above the ceiling is limited. The regressed lens with sharp baffle cuts reduces aperture brightness. Features Regressed lens with baffle Thin construction measures under 2" height IC Air-Tight & wet location listed Quick disconnect allows for easy installation Triac or ELV dimming 5-Year limited warranty Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 1400lm / 20W Color Temperature: 3500K or 4000K Color Rendering Index: 90+ CRI Finish: White Accessories: NFLIN-8S-F: New Construction Frame-In NFLIN-EW-4: 4' Quick Connect Extension Cable NFLIN-EW-20: 20' Quick Connect Extension Cable - [NFP-S625](https://noralighting.com/product/nfp-s625/) - New construction plate for 6" FLIN Square LED Recessed Downlight. Assist indicating wiring location and cutting guide. Compatible Luminaires: NEFLINTW-S6233: 6" FLIN Square Can-less Downlight NEFLINTW-S6MPW: 6" FLIN Square Can-less Downlight - [NPTCBSW-22](https://noralighting.com/product/nptcbsw-22/) - Center Basket LED troffers provide both functionality and efficiency with two integrated, selectable switches. Selectable lumens allow for a variety of mounting heights, and Selectable CCT adjusts the color temperature. A smooth matte white finish provides glare-reducing general lighting for commercial and industrial applications. The luminaires are suitable for office, school, retail, hospital, and hospitality applications. Features Architectural style and quality Complete room illumination Soft, uniform reflectance Fits most grid ceilings Selectable Lumen switch changes the wattage and brightness level Five color temperatures in each fixture cULus Damp Location Listed Input Voltage: 120-277VAC Selectable Lumens: 2850lm / 18W; 3950lm / 28W; 5050lm / 38W Color Temperature: Selectable CCT (3000K / 3500K / 4000K / 5000K / 6500K) Dimming: 0-10V down to 10% Finish: White Emergency: Luminaires are compatible with a remote emergency kit (NEPK-20LEDUNV-JB)  - [NPTCBSW-24](https://noralighting.com/product/nptcbsw-24/) - Center Basket LED troffers provide both functionality and efficiency with two integrated, selectable switches. Selectable lumens allow for a variety of mounting heights, and Selectable CCT adjusts the color temperature. A smooth matte white finish provides glare-reducing general lighting for commercial and industrial applications. The luminaires are suitable for office, school, retail, hospital, and hospitality applications. Features Architectural style and quality Complete room illumination Soft, uniform reflectance Fits most grid ceilings Selectable Lumen switch changes the wattage and brightness level Five color temperatures in each fixture cULus Damp Location Listed Input Voltage: 120-277VAC Selectable Lumens: 4250lm / 28W; 5450lm / 38W; 6350lm / 48W Color Temperature: Selectable CCT (3000K / 3500K / 4000K / 5000K / 6500K) Dimming: 0-10V down to 10% Finish: White Emergency: Luminaires are compatible with a remote emergency kit (NEPK-20LEDUNV-JB)  - [NFLIN-EW-20](https://noralighting.com/product/nflin-ew-20/) - FLIN Extension cables are used to extend the length between luminaire and driver enclosure. Can be connected together to create custom lengths. Compatible Luminaires: NFLIN-R815 NFLIN-S815 - [NFLIN-EW-4](https://noralighting.com/product/nflin-ew-4/) - FLIN Extension cables are used to extend the length between luminaire and driver enclosure. Can be connected together to create custom lengths. Compatible Luminaires: NFLIN-R815 NFLIN-S815 - [NPR-TLMR-6R](https://noralighting.com/product/npr-tlmr-6r/) - Converts existing 6" recessed housings to allow a 4" Pearl round trimless retrofit to install even to the ceiling, with no extension beyond the ceiling plane or exposed flange. The mud ring attaches to drywall and requires professional drywall finishing. Compatible Trimless: NPR-4RTLNDC: 4" 120V Pearl LED Round Trimless Retrofit Downlight NPR-4RTLA: 4" 120V Pearl Round Trimless Adjustable Retrofit NPR-4RTSLA: 4" 120V Pearl Round Trimless Adjustable Slot Retrofit NPRLV-4RTLNDC: 4" 120V Pearl LED Round Trimless Retrofit Downlight NPRLV-4RTLA: 4" 120V Pearl Round Trimless Adjustable Retrofit NPRLV-4RTSLA: 4" 120V Pearl Round Trimless Adjustable Slot Retrofit  - [NPR-TLMR-4R](https://noralighting.com/product/npr-tlmr-4r/) - Allows 4" Pearl round trimless retrofits to be installed even no exposed flange and no extension beyond ceiling plane. Mud ring attaches to drywall and requires professional drywall finishing. Compatible Trimless: NPR-4RTLNDC: 4" 120V Pearl LED Round Trimless Retrofit Downlight NPR-4RTLA: 4" 120V Pearl Round Trimless Adjustable Retrofit NPR-4RTSLA: 4" 120V Pearl Round Trimless Adjustable Slot Retrofit NPRLV-4RTLNDC: 4" 120V Pearl LED Round Trimless Retrofit Downlight NPRLV-4RTLA: 4" 120V Pearl Round Trimless Adjustable Retrofit NPRLV-4RTSLA: 4" 120V Pearl Round Trimless Adjustable Slot Retrofit  - [NPRLV-56RSLA](https://noralighting.com/product/nprlv-56rsla/) - 5"/6" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. Retrofit luminaires deliver over 1050 lumens with a regressed cone construction, which optimizes visual cut-off and adjusts up to 30°. Input Voltage: 12V Socket: GU5.3 Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1050lm (600lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housings: NL-601 = 6" Non-IC New Construction NLR-604 = 6" Non-IC Remodel  - [NPR-56RSLA](https://noralighting.com/product/npr-56rsla/) - 5"/6" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. Retrofit luminaires deliver over 1050 lumens with a regressed cone construction, which optimizes visual cut-off and adjusts up to 30°. Input Voltage: 120V Socket: Medium base socket adapter included Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1050lm (600lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housings: NFBIC-5LMRATA = 5" Fire Rated LED Housing NFBIC-5INCATA = 5" Fire Rated Line Voltage Housing NHIC-5LMRAT = 5" IC Air-Tight LED Housing NHIC-527LMRAT = 5" Shallow IC Air-Tight LED Housing NHIC-501QAT = 5" IC Air-Tight Line Voltage Housing NHIC-527QAT = 5" Shallow IC Air-Tight Line Voltage Housing NFBIC-6LMRATA = 6" Fire Rated LED Housing NFBIC-6INCATA = 6" Fire Rated Line Voltage Housing NHIC-6LMRAT = 6" IC Air-Tight LED Housing NHIC-27LMRAT = 6" Shallow IC Air-Tight LED Housing NHIC-17QAT = 6" IC Air-Tight Line Voltage Housing NHIC-27QAT = 6" IC Air-Tight Line Voltage Housing NH-26Q = 6" Non-IC Air-Tight Line Voltage Housing NH-27Q = 6" Shallow Non-IC Air-Tight Line Voltage Housing NHIC-6G24ATFL = 6" IC Air-Tight GU24 Housing NHRIC-5LMRAT = 5" IC Air-Tight LED Remodel Housing NHRIC-527LMRAT = 5" Shallow IC Air-Tight LED Remodel Housing NHRIC-504QAT = 5" IC Air-Tight Line Voltage Remodel Housing NHRIC-6LMRAT = 6" IC Air-Tight LED Remodel Housing NHRIC-27LMRAT = 6" Shallow IC Air-Tight LED Remodel Housing NHRIC-17QAT = 6" IC Air-Tight Line Voltage Remodel Housing NHRIC-27QAT = 6" IC Air-Tight Line Voltage Remodel Housing NHR-26Q = 6" Non-IC Air-Tight Line Voltage Remodel Housing NHR-27Q = 6" Shallow Non-IC Air-Tight Line Voltage Remodel Housing Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch  - [NPRLV-56RNDC](https://noralighting.com/product/nprlv-56rndc/) - 5"/6" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. Retrofit luminaires deliver over 1150 lumens with die-cast downlight. Input Voltage: 12V Socket: GU5.3 Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1150lm (700lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housings: NL-601 = 6" Non-IC New Construction NLR-604 = 6" Non-IC Remodel  - [NPRLV-4SNDSQ](https://noralighting.com/product/nprlv-4sndsq/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4" retrofit luminaires deliver over 1150 lumens with deep regressed cone reflector for optimal visual cut-off. Input Voltage: 12V Socket: GU5.3 Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1150lm (700lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NLIC-401 = IC Air-Tight Double Wall New Construction NL-401 = Non-IC New Construction NLR-404 = Non-IC Remodel  - [NPR-4SNDSQ](https://noralighting.com/product/npr-4sndsq/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4" retrofit luminaires deliver over 1150 lumens with deep regressed cone reflector for optimal visual cut-off. Input Voltage: 120V Socket: Medium base socket adapter included Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1150lm (700lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NFBIC-4LMRATA = Fire Rated LED Housing NFBIC-4INCATA = Fire Rated Line Voltage Housing NSIC-4LMRAT = Max. Adjustability LED Dedicated ICAT Housing NHIC-4LMRAT = IC Air-Tight LED Housing NSIC-401QAT = IC Air-Tight Line Voltage Housing NS-401QAT = Non-IC Air-Tight Line Voltage Housing NHIC-4G24AT = IC Air-Tight GU24 Housing NHRIC-4LMRAT = IC Air-Tight LED Remodel Housing NSRIC-404QAT = IC Air-Tight Line Voltage Housing NSR-404QAT = Non-IC Air-Tight Line Voltage Housing Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch  - [NPRLV-4SNDC](https://noralighting.com/product/nprlv-4sndc/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4" retrofit luminaires deliver over 1150 lumens with deep regressed cone reflector for optimal visual cut-off. Input Voltage: 12V Socket: GU5.3 Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1150lm (700lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NLIC-401 = IC Air-Tight Double Wall New Construction NL-401 = Non-IC New Construction NLR-404 = Non-IC Remodel  - [NPR-4SNDC](https://noralighting.com/product/npr-4sndc/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4" retrofit luminaires deliver over 1150 lumens with deep regressed cone reflector for optimal visual cut-off. Input Voltage: 120V Socket: Medium base socket adapter included Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1150lm (700lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NFBIC-4LMRATA = Fire Rated LED Housing NFBIC-4INCATA = Fire Rated Line Voltage Housing NSIC-4LMRAT = Max. Adjustability LED Dedicated ICAT Housing NHIC-4LMRAT = IC Air-Tight LED Housing NSIC-401QAT = IC Air-Tight Line Voltage Housing NS-401QAT = Non-IC Air-Tight Line Voltage Housing NHIC-4G24AT = IC Air-Tight GU24 Housing NHRIC-4LMRAT = IC Air-Tight LED Remodel Housing NSRIC-404QAT = IC Air-Tight Line Voltage Housing NSR-404QAT = Non-IC Air-Tight Line Voltage Housing Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch  - [NPRLV-4SNB](https://noralighting.com/product/nprlv-4snb/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4" retrofit luminaires deliver over 1250 lumens with a filleted aperture which allows for minimal aperture brightness while still producing the nadir footcandles. Input Voltage: 12V Socket: GU5.3 Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1250lm (750lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NLIC-401 = IC Air-Tight Double Wall New Construction NL-401 = Non-IC New Construction NLR-404 = Non-IC Remodel  - [NPR-4SNB](https://noralighting.com/product/npr-4snb/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4" retrofit luminaires deliver over 1250 lumens with a filleted aperture which allows for minimal aperture brightness while still producing the nadir footcandles. Input Voltage: 120V Socket: Medium base socket adapter included Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1250lm (750lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NFBIC-4LMRATA = Fire-Rated LED Housing NFBIC-4INCATA = Fire-Rated Line Voltage Housing NFJB-R4 = Fire-Rated Junction Box Housing NSIC-4LMRAT = Max. Adjustability LED Dedicated ICAT Housing NHIC-4LMRAT = IC Air-Tight LED Housing NSIC-401QAT = IC Air-Tight Line Voltage Housing NS-401QAT = Non-IC Air-Tight Line Voltage Housing NHIC-4G24AT = IC Air-Tight GU24 Housing NHRIC-4LMRAT = IC Air-Tight LED Remodel Housing NSRIC-404QAT = IC Air-Tight Line Voltage Housing NSR-404QAT = Non-IC Air-Tight Line Voltage Housing Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch  - [NPRLV-4SG](https://noralighting.com/product/nprlv-4sg/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4" retrofit luminaires deliver over 1050 lumens with die-cast adjustable gimbal to aim the light source in desired direction. Input Voltage: 12V Socket: GU5.3 Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1050lm (600lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NLIC-401 = IC Air-Tight Double Wall New Construction NL-401 = Non-IC New Construction NL-402S = Shallow Non-IC New Construction NLR-403S = Shallow Non-IC Remodel NLR-404 = Non-IC Remodel  - [NPR-4SG](https://noralighting.com/product/npr-4sg/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4" retrofit luminaires deliver over 1050 lumens with die-cast adjustable gimbal to aim the light source in desired direction. Input Voltage: 120V Socket: Medium base socket adapter included Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1050lm (600lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NFBIC-4LMRATA = Fire Rated LED Housing NFBIC-427LMRATA = Shallow Fire Rated LED Housing NFBIC-4INCATA = Fire Rated Line Voltage Housing NFJB-R4 = Fire-Rated Junction Box Housing NSIC-4LMRAT = Max. Adjustability LED Dedicated ICAT Housing NHIC-4LMRAT = IC Air-Tight LED Housing NHIC-427LMRAT = Shallow IC Air-Tight LED Housing NSIC-401QAT = IC Air-Tight Line Voltage Housing NS-401QAT = Non-IC Air-Tight Line Voltage Housing NHIC-4G24AT = IC Air-Tight GU24 Housing NHRIC-4LMRAT = IC Air-Tight LED Remodel Housing NHRIC-427LMRAT = Shallow IC Air-Tight LED Remodel Housing NSRIC-404QAT = IC Air-Tight Line Voltage Housing NSR-404QAT = Non-IC Air-Tight Line Voltage Housing Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch  - [NPRLV-4SC](https://noralighting.com/product/nprlv-4sc/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4" retrofit luminaires deliver over 1250 lumens with die-cast adjustable cone for optimal visual cut-off and adjustability to aim the light source in desired direction. Input Voltage: 12V Socket: GU5.3 Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1250lm (750lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NLIC-401 = IC Air-Tight Double Wall New Construction NL-401 = Non-IC New Construction NL-402S = Shallow Non-IC New Construction NLR-403S = Shallow Non-IC Remodel NLR-404 = Non-IC Remodel  - [NPR-4SC](https://noralighting.com/product/npr-4sc/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4" retrofit luminaires deliver over 1250 lumens with die-cast adjustable cone for optimal visual cut-off and adjustability to aim the light source in desired direction. Input Voltage: 120V Socket: Medium base socket adapter included Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1250lm (750lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NFBIC-4LMRATA = Fire Rated LED Housing NFBIC-427LMRATA = Shallow Fire Rated LED Housing NFBIC-4INCATA = Fire Rated Line Voltage Housing NFJB-R4 = Fire-Rated Junction Box Housing NSIC-4LMRAT = Max. Adjustability LED Dedicated ICAT Housing NHIC-4LMRAT = IC Air-Tight LED Housing NHIC-427LMRAT = Shallow IC Air-Tight LED Housing NSIC-401QAT = IC Air-Tight Line Voltage Housing NS-401QAT = Non-IC Air-Tight Line Voltage Housing NHIC-4G24AT = IC Air-Tight GU24 Housing NHRIC-4LMRAT = IC Air-Tight LED Remodel Housing NHRIC-427LMRAT = Shallow IC Air-Tight LED Remodel Housing NSRIC-404QAT = IC Air-Tight Line Voltage Housing NSR-404QAT = Non-IC Air-Tight Line Voltage Housing Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch  - [NPRLV-4RTSLA](https://noralighting.com/product/nprlv-4rtsla/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. Each luminaire requires a trimless mud ring and will have no exposed trim flange or extend beyond the ceiling plane. Regressed cone construction optimizes visual cutoff and adjust up to 35°. Input Voltage: 12V (Also available in 120V input, Click Here for more information) Socket: GU5.3 Color Temperatures: 2700K, 3000K, 3500K, 4000K Lumens / Wattage: 1050lm (600lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Required: Trimless Mud Plate (NPR-TLMR-4R or NPR-TLMR-6R) Compatible Housing: NLIC-401 = 4" IC Air-Tight Double Wall New Construction NL-401 = 4" Non-IC New Construction NL-601 = 6″ Non-IC New Construction Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch  - [NPR-4RTSLA](https://noralighting.com/product/npr-4rtsla/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. Each luminaire requires a trimless mud ring and will have no exposed trim flange or extend beyond the ceiling plane. Regressed cone construction optimizes visual cutoff and adjust up to 35°. Input Voltage: 120V (Also available in 12V input, Click Here for more information) Socket: Medium base socket adapter included Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1050lm (600lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Required: Trimless Mud Plate (NPR-TLMR-4R or NPR-TLMR-6R) Compatible Housing: NSIC-4LMRAT = 4" Max. Adjustability LED Dedicated ICAT Housing NHIC-4LMRAT = 4" IC Air-Tight LED Housing NSIC-401QAT = 4" IC Air-Tight Line Voltage Housing NS-401QAT = 4" Non-IC Air-Tight Line Voltage Housing NHIC-4G24AT = 4" IC Air-Tight GU24 Housing (requires NRA-212SM) NHIC-6LMRAT = 6″ IC Air-Tight LED Housing NHIC-17QAT = 6″ IC Air-Tight Line Voltage Housing NHIC-27QAT = 6″ Shallow IC Air-Tight Line Voltage Housing NH-26Q = 6″ Shallow Non-IC Air-Tight Line Voltage Housing NH-27Q = 6″ Shallow Non-IC Air-Tight Line Voltage Housing NHIC-6G24ATFL = 6″ IC Air-Tight GU24 Housing (requires NRA-212SM) Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch  - [NPRLV-4RTLNDC](https://noralighting.com/product/nprlv-4rtlndc/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. Each luminaire requires a trimless mud ring and will have no exposed trim flange or extend beyond the ceiling plane. Deep regressed cone reflectors optimize visual cut-off. Input Voltage: 12V (Also available in 120V input, Click Here for more information) Socket: GU5.3 Color Temperatures: 2700K, 3000K, 3500K, 4000K Lumens / Wattage: 1150lm (650lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Required: Trimless Mud Plate (NPR-TLMR-4R or NPR-TLMR-6R) Compatible Housing: NLIC-401 = 4" IC Air-Tight Double Wall New Construction NL-401 = 4" Non-IC New Construction NL-601 = 6″ Non-IC New Construction Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch  - [NPR-4RTLNDC](https://noralighting.com/product/npr-4rtlndc/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. Each luminaire requires a trimless mud ring and will have no exposed trim flange or extend beyond the ceiling plane. Deep regressed cone reflectors optimize visual cut-off. Input Voltage: 120V (Also available in 12V input, Click Here for more information) Socket: Medium base socket adapter included Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1150lm (650lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Required: Trimless Mud Plate (NPR-TLMR-4R or NPR-TLMR-6R) Compatible Housing: NSIC-4LMRAT = 4" Max. Adjustability LED Dedicated ICAT Housing NHIC-4LMRAT = 4" IC Air-Tight LED Housing NSIC-401QAT = 4" IC Air-Tight Line Voltage Housing NS-401QAT = 4" Non-IC Air-Tight Line Voltage Housing NHIC-4G24AT = 4" IC Air-Tight GU24 Housing (requires NRA-212SM) NHIC-6LMRAT = 6″ IC Air-Tight LED Housing NHIC-17QAT = 6″ IC Air-Tight Line Voltage Housing NHIC-27QAT = 6″ Shallow IC Air-Tight Line Voltage Housing NH-26Q = 6″ Shallow Non-IC Air-Tight Line Voltage Housing NH-27Q = 6″ Shallow Non-IC Air-Tight Line Voltage Housing NHIC-6G24ATFL = 6″ IC Air-Tight GU24 Housing (requires NRA-212SM) Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch  - [NPRLV-4RTLA](https://noralighting.com/product/nprlv-4rtla/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. Each luminaire requires a trimless mud ring and will have no exposed trim flange or extend beyond the ceiling plane. Regressed cone reflector optimizes visual cut-off and adjust up to 35°. Input Voltage: 12V (Also available in 120V input, Click Here for more information) Socket: GU5.3 Color Temperatures: 2700K, 3000K, 3500K, 4000K Lumens / Wattage: 1150lm (700lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Required: Trimless Mud Plate (NPR-TLMR-4R or NPR-TLMR-6R) Compatible Housing: NLIC-401 = 4" IC Air-Tight Double Wall New Construction NL-401 = 4" Non-IC New Construction NL-601 = 6″ Non-IC New Construction Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch  - [NPR-4RTLA](https://noralighting.com/product/npr-4rtla/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. Each luminaire requires a trimless mud ring and will have no exposed trim flange or extend beyond the ceiling plane. Regressed cone reflector optimizes visual cut-off and adjust up to 35°. Input Voltage: 120V (Also available in 12V input, Click Here for more information) Socket: Medium base socket adapter included Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1150lm (700lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Required: Trimless Mud Plate (NPR-TLMR-4R or NPR-TLMR-6R) Compatible Housing: NSIC-4LMRAT = 4" Max. Adjustability LED Dedicated ICAT Housing NHIC-4LMRAT = 4" IC Air-Tight LED Housing NSIC-401QAT = 4" IC Air-Tight Line Voltage Housing NS-401QAT = 4" Non-IC Air-Tight Line Voltage Housing NHIC-4G24AT = 4" IC Air-Tight GU24 Housing (requires NRA-212SM) NHIC-6LMRAT = 6″ IC Air-Tight LED Housing NHIC-17QAT = 6″ IC Air-Tight Line Voltage Housing NHIC-27QAT = 6″ Shallow IC Air-Tight Line Voltage Housing NH-26Q = 6″ Shallow Non-IC Air-Tight Line Voltage Housing NH-27Q = 6″ Shallow Non-IC Air-Tight Line Voltage Housing NHIC-6G24ATFL = 6″ IC Air-Tight GU24 Housing (requires NRA-212SM) Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch  - [NPRLV-4RSLA](https://noralighting.com/product/nprlv-4rsla/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4" retrofit luminaires deliver over 1050 lumens with a regressed cone construction, which optimizes visual cut-off and adjusts up to 30°. Input Voltage: 12V Socket: GU5.3 Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1050lm (600lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NLIC-401 = IC Air-Tight Double Wall New Construction NL-401 = Non-IC New Construction NLR-404 = Non-IC Remodel  - [NPR-4RSLA](https://noralighting.com/product/npr-4rsla/) - 4" Pearl LED Retrofit series is cULus classified for use with NSIC-4LMRAT (maximum adjustability housing). The 4" retrofit luminaires deliver over 1050 lumens with a regressed cone construction, which optimizes visual cut-off and adjusts up to 30°. Input Voltage: 120V Socket: Medium base socket adapter included Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1050lm (650lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NSIC-4LMRAT = Max. Adjustability LED Dedicated ICAT Housing Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch  - [NPRLV-4RSL](https://noralighting.com/product/nprlv-4rsl/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4" retrofit luminaires deliver over 950 lumens with an adjustable slot aperture to focus the beam spread through 2-5/8" x 2" opening. Input Voltage: 12V Socket: GU5.3 Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 950lm (550lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NLIC-401 = IC Air-Tight Double Wall New Construction NL-401 = Non-IC New Construction NLR-404 = Non-IC Remodel  - [NPR-4RSL](https://noralighting.com/product/npr-4rsl/) - 4" Pearl LED Retrofit series is cULus classified for use with NSIC-4LMRAT (maximum adjustability housing). The 4" retrofit luminaires deliver over 950 lumens with an adjustable slot aperture to focus the beam spread through 2-5/8" x 2" opening. Input Voltage: 120V Socket: Medium base socket adapter included Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 950lm (550lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NSIC-4LMRAT = Max. Adjustability LED Dedicated ICAT Housing Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch  - [NPRLV-4RPHA](https://noralighting.com/product/nprlv-4rpha/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4" retrofit luminaires deliver over 950 lumens with a 2" pinhole to focus the beam spread through a small opening. They are also available in a fixed downlight. Input Voltage: 12V Socket: GU5.3 Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 950lm (550lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NLIC-401 = IC Air-Tight Double Wall New Construction NL-401 = Non-IC New Construction NLR-404 = Non-IC Remodel  - [NPR-4RC](https://noralighting.com/product/npr-4rc/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4" retrofit luminaires deliver over 1250 lumens with die-cast adjustable cone for optimal visual cut-off and adjustability to aim the light source in desired direction. Input Voltage: 120V (Also available in 12V input, Click Here for more information) Socket: Medium base socket adapter included Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1250lm (750lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NFBIC-4LMRATA = Fire Rated LED Housing NFBIC-427LMRATA = Shallow Fire Rated LED Housing NFBIC-4INCATA = Fire Rated Line Voltage Housing NFJB-R4 = Fire-Rated Junction Box Housing NSIC-4LMRAT = Max. Adjustability LED Dedicated ICAT Housing NHIC-4LMRAT = IC Air-Tight LED Housing NHIC-427LMRAT = Shallow IC Air-Tight LED Housing NSIC-401QAT = IC Air-Tight Line Voltage Housing NS-401QAT = Non-IC Air-Tight Line Voltage Housing NHIC-4G24AT = IC Air-Tight GU24 Housing NHRIC-4LMRAT = IC Air-Tight LED Remodel Housing NHRIC-427LMRAT = Shallow IC Air-Tight LED Remodel Housing NSRIC-404QAT = IC Air-Tight Line Voltage Housing NSR-404QAT = Non-IC Air-Tight Line Voltage Housing Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch  - [NPRLV-4RC](https://noralighting.com/product/nprlv-4rc/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4" retrofit luminaires deliver over 1250 lumens with die-cast adjustable cone for optimal visual cut-off and adjustability to aim the light source in desired direction. Input Voltage: 12V (Also available in 120V input, Click Here for more information) Socket: GU5.3 Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1250lm (750lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NLIC-401 = IC Air-Tight Double Wall New Construction NL-401 = Non-IC New Construction NL-402S = Shallow Non-IC New Construction NLR-403S = Shallow Non-IC Remodel NLR-404 = Non-IC Remodel  - [NPR-4RG](https://noralighting.com/product/npr-4rg/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4" retrofit luminaires deliver over 1000 lumens with die-cast adjustable gimbal to aim the light source in desired direction. Input Voltage: 120V (Also available in 12V input, Click Here for more information) Socket: Medium base socket adapter included Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1050lm (600lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NFBIC-4LMRATA = Fire Rated LED Housing NFBIC-427LMRATA = Shallow Fire Rated LED Housing NFBIC-4INCATA = Fire Rated Line Voltage Housing NFJB-R4 = Fire-Rated Junction Box Housing NSIC-4LMRAT = Max. Adjustability LED Dedicated ICAT Housing NHIC-4LMRAT = IC Air-Tight LED Housing NHIC-427LMRAT = Shallow IC Air-Tight LED Housing NSIC-401QAT = IC Air-Tight Line Voltage Housing NS-401QAT = Non-IC Air-Tight Line Voltage Housing NHIC-4G24AT = IC Air-Tight GU24 Housing NHRIC-4LMRAT = IC Air-Tight LED Remodel Housing NHRIC-427LMRAT = Shallow IC Air-Tight LED Remodel Housing NSRIC-404QAT = IC Air-Tight Line Voltage Housing NSR-404QAT = Non-IC Air-Tight Line Voltage Housing Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch  - [NPRLV-4RG](https://noralighting.com/product/nprlv-4rg/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4" retrofit luminaires deliver up to 1050 lumens with die-cast adjustable gimbal to aim the light source in desired direction. Input Voltage: 12V (Also available in 120V input, Click Here for more information) Socket: GU5.3 Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1050lm (600lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NLIC-401 = IC Air-Tight Double Wall New Construction NL-401 = Non-IC New Construction NL-402S = Shallow Non-IC New Construction NLR-403S = Shallow Non-IC Remodel NLR-404 = Non-IC Remodel  - [NPR-4RNB](https://noralighting.com/product/npr-4rnb/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4" retrofit luminaires deliver over 1250 lumens with filleted aperture which allows for minimal aperture brightness while still producing the nadir footcandles. Input Voltage: 120V Socket: Medium base socket adapter included Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1250lm (750lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NFBIC-4LMRATA = Fire Rated LED Housing NFBIC-427LMRATA = Shallow Fire Rated LED Housing NFBIC-4INCATA = Fire Rated Line Voltage Housing NFJB-R4 = Fire-Rated Junction Box Housing NSIC-4LMRAT = Max. Adjustability LED Dedicated ICAT Housing NHIC-4LMRAT = IC Air-Tight LED Housing NSIC-401QAT = IC Air-Tight Line Voltage Housing NS-401QAT = Non-IC Air-Tight Line Voltage Housing NHIC-4G24AT = IC Air-Tight GU24 Housing NHRIC-4LMRAT = IC Air-Tight LED Remodel Housing NSRIC-404QAT = IC Air-Tight Line Voltage Housing NSR-404QAT = Non-IC Air-Tight Line Voltage Housing Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch  - [NPRLV-4RNB](https://noralighting.com/product/nprlv-4rnb/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4" retrofit luminaires deliver over 1250 lumens with filleted aperture which allows for minimal aperture brightness while still producing the nadir footcandles. Input Voltage: 12V Socket: GU5.3 Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1250lm (750lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NLIC-401 = IC Air-Tight Double Wall New Construction NL-401 = Non-IC New Construction NLR-404 = Non-IC Remodel  - [NPR-4RNDC](https://noralighting.com/product/npr-4rndc/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4" retrofit luminaires deliver over 1150 lumens with deep regressed cone reflector for optimal visual cut-off. Input Voltage: 120V Socket: Medium base socket adapter included Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1150lm (700lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NFBIC-4LMRATA = Fire Rated LED Housing NFBIC-4INCATA = Fire Rated Line Voltage Housing NSIC-4LMRAT = Max. Adjustability LED Dedicated ICAT Housing NHIC-4LMRAT = IC Air-Tight LED Housing NSIC-401QAT = IC Air-Tight Line Voltage Housing NS-401QAT = Non-IC Air-Tight Line Voltage Housing NHIC-4G24AT = IC Air-Tight GU24 Housing NHRIC-4LMRAT = IC Air-Tight LED Remodel Housing NSRIC-404QAT = IC Air-Tight Line Voltage Housing NSR-404QAT = Non-IC Air-Tight Line Voltage Housing Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch  - [NPRLV-4RNDC](https://noralighting.com/product/nprlv-4rndc/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4" retrofit luminaires deliver over 1150 lumens with deep regressed cone reflector for optimal visual cut-off. Input Voltage: 12V Socket: GU5.3 Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1150lm (700lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NLIC-401 = IC Air-Tight Double Wall New Construction NL-401 = Non-IC New Construction NLR-404 = Non-IC Remodel  - [NPR-4RPH](https://noralighting.com/product/npr-4rph/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4" retrofit luminaires deliver over 950 lumens with a 2" pinhole to focus the beam spread through a small opening. They are also available in adjustable. Input Voltage: 120V Socket: Medium base socket adapter included Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 950lm (550lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NFBIC-4LMRATA = Fire Rated LED Housing NFBIC-4INCATA = Fire Rated Line Voltage Housing NSIC-4LMRAT = Max. Adjustability LED Dedicated ICAT Housing NHIC-4LMRAT = IC Air-Tight LED Housing NSIC-401QAT = IC Air-Tight Line Voltage Housing NS-401QAT = Non-IC Air-Tight Line Voltage Housing NHIC-4G24AT = IC Air-Tight GU24 Housing NHRIC-4LMRAT = IC Air-Tight LED Remodel Housing NSRIC-404QAT = IC Air-Tight Line Voltage Housing NSR-404QAT = Non-IC Air-Tight Line Voltage Housing Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch  - [NPRLV-4RPH](https://noralighting.com/product/nprlv-4rph/) - 4" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The 4" retrofit luminaires deliver over 950 lumens with a 2" pinhole to focus the beam spread through a small opening. They are also available in adjustable. Input Voltage: 12V Socket: GU5.3 Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 950lm (550lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NLIC-401 = IC Air-Tight Double Wall New Construction NL-401 = Non-IC New Construction NLR-404 = Non-IC Remodel  - [NPR-4RPHA](https://noralighting.com/product/npr-4rpha/) - 4" Pearl LED Retrofit series is cULus classified for with NSIC-4LMRAT (maximum adjustability housing). The 4" retrofit luminaires deliver over 950 lumens with a 2" pinhole to focus the beam spread through a small opening. They are also available in a fixed downlight. Input Voltage: 120V Socket: Medium base socket adapter included Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 950lm (550lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housing: NSIC-4LMRAT = Max. Adjustability LED Dedicated ICAT Housing Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch  - [NUTPCOB-RGBW](https://noralighting.com/product/nutpcob-rgbw/) - 24V RGBW COB LED Tape light creates a uniform seamless line of light, without additional diffused covers or accessories. Producing up to 300 lumens per foot with RGB color-changing LEDs and dedicated 3000K. Users can create any color in the rainbow using a compatible controller. Tape light is a perfect solution for low clearance or reflective surfaces to eliminate all glare or dotting. Features · 24V system - requires RGBW Controller & Class 2 LED driver · Seamless COB eliminates LED dotting · Field cuttable every 1.31" and connectable with accessories · Roll includes: Tape light, 12" power feed, mounting clips and screws · Easy to install with pre-applied adhesive tape or clips · cULus Listed for indoor dry locations (IP20 rated) Length: 16.4' Input Voltage: 24V Lumens / Wattage: 300lm / 5.5W per foot Dimming: Dimmable with RGBW controller Primary Colors: Red, Green, Blue and White (3000K) Color Rendering Index: 90+ CRI Controller or Decoder: NATL-875: RGBW RF Controller NATL-877: Hand Held Remote for NATL-875 Accessories: NATLCB-508: 12" Hardwire Power Cord NATLCB-507: End-to-End Connector NATLCB-503: 3" Linking Cable NATLCB-506: 6" Linking Cable NATLCB-518: 18" Linking Cable NATLCB-536: 36" Linking Cable NATLCB-572: 72" Linking Cable NATLCB-L: L Connector NATLCB-T: T Connector NATLCB-X: X Connector Channels: NATL-C23: 4' Shallow Recessed Channel NATL-C24: 4' Shallow Channel NATL-C25: 4' Deep Recessed Channel NATL-C26: 4' Deep Channel NATL-C27: 4' J-Style Channel NATL-C28: 4' Corner Channel NATLCB-509: Clear Mounting Clips 24V Drivers: NATL-524W: 120V/24V 24W Plug-In Driver NATL-545W: 120V/24V 45W Plug-In Driver NATL-596W: 120V/24V 96W Plug-In Driver NPSU-60W/24: 110-277V/24V 60W Driver NPSU-96W/24: 110-277V/24V96W Driver NMT-48/24C2D1: 120V/24V 48W Driver NMT-303/24C2D1: 120V/24V 3x100W Driver NMT-303/24C2D2: 277V/24V 3x100W Driver NMTD-60/24D: 120-277V/24V 60W Driver with Regulator NMTD-96/24D: 120-277V/24V 96W Driver with Regulator - [NIOC-4RTLNDC](https://noralighting.com/product/nioc-4rtlndc/) - 4" Iolite can-less downlights can be installed in new construction or remodel applications. Each luminaire requires a trimless mud ring and will have no exposed trim flange or extend beyond the ceiling plane. Deep regressed cone reflectors optimize visual cut-off. Compatible LED module: NIOC-24LED Compatible Driver Box: NJCB-12 Required Trimless Mud Plate: NIOC-TLMR-4R Finishes: Black, Bronze, Haze, or Bright White Accessories: NIO-AS: Translucent/Opaque Deco Collars NIO-HC: Hex Louver NFC-R375: New Construction Frame-In with Collar  - [NIOC-4RTLSLA](https://noralighting.com/product/nioc-4rtlsla/) - 4" Iolite can-less downlights can be installed in new construction or remodel applications. Each luminaire requires a trimless mud ring and will have no exposed trim flange or extend beyond the ceiling plane. Deep regressed cone reflectors optimize visual cut-off and adjust up to 30°. Compatible LED module: NIOC-24LED Compatible Driver Box: NJCB-12 Required Trimless Mud Plate: NIOC-TLMR-4R Finishes: Black or Bright White Accessories: NIO-AS: Translucent/Opaque Deco Collars NIO-HC: Hex Louver NFC-R375: New Construction Frame-In with Collar  - [NIOC-TLMR-4R](https://noralighting.com/product/nioc-tlmr-4r/) - Allows 4" iolite canless round trimless to be installed without any housing, exposed flange or extension beyond the ceiling plane. Mud ring attaches to drywall and requires professional drywall finishing. Compatible Trimless: NIOC-4RTLNDC: 4" Iolite Can-less Trimless Downlight NIOC-4RTLSLA: 4" Iolite Can-less Trimless Adjustable Slot  - [NCSR-R61TW](https://noralighting.com/product/ncsr-r61tw/) - Contractor Series: 6" LED Retrofit downlights are designed for easy installation into new construction or remodel applications. Each downlight includes a Selectable CCT switch located on the junction box. The deep reflector provides excellent glare control, quality of light, and efficiency. Luminaires are sold in bulk packs (Pack of 12). Input Voltage: 120VAC Includes: Medium Base Socket Adapter Lumens / Wattage: Up to 950lm / 12W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Dimming: Triac or ELV Finish: White Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch Listing: cETLus classified for Wet Locations Warranty: Five Years - [NCSR-R41TW](https://noralighting.com/product/ncsr-r41tw/) - Contractor Series: 4" LED Retrofit downlights are designed for easy installation into new construction or remodel applications. Each downlight includes a Selectable CCT switch located on the junction box. The deep reflector provides excellent glare control, quality of light, and efficiency. Luminaires are sold in bulk packs (Pack of 12). Input Voltage: 120VAC Includes: Medium Base Socket Adapter Lumens / Wattage: Up to 700lm / 10W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Dimming: Triac or ELV Finish: White Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch Listing: cETLus classified for Wet Locations Warranty: Five Years - [NYLM-3C](https://noralighting.com/product/nylm-3c/) - iLENE Mini Cylinders are available in three sizes and lumen outputs. Using Cree COB LED technology, each iLENE includes three field changeable optics for spot, narrow flood and flood beam spreads. The optics are deep set for excellent visual comfort. The canopy mounted driver allows for cool operation and optional driver and dimming options. FEATURES Architectural die-cast aluminum construction and style Cree COB LED Technology Deep set optics Dimmable (Triac, ELV or 0-10V) Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 1500lm / 30W CCT: 2700K, 3000K, 3500K, 4000K or Comfort Dim (3100K to 2000K) Field Changeable Optics: Spot, Narrow Flood and Flood are included Mounting: 8' Aircraft Cable (field adjustable) Finishes: Black, Silver or Bright White Optional Remote Emergency: NEPK-07LEDUNV: 7W Emergency LED Driver with Remote Test Switch - [NYLM-3ST](https://noralighting.com/product/nylm-3st/) - iLENE Mini Cylinders are available in three sizes and lumen outputs. Using Cree COB LED technology, each iLENE includes three field changeable optics for spot, narrow flood and flood beam spreads. The optics are deep set for excellent visual comfort. The canopy mounted driver allows for cool operation and optional driver and dimming options. FEATURES Architectural die-cast aluminum construction and style Cree COB LED Technology Deep set optics Dimmable (Triac, ELV or 0-10V) Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 1500lm / 30W CCT: 2700K, 3000K, 3500K, 4000K or Comfort Dim (3100K to 2000K) Field Changeable Optics: Spot, Narrow Flood and Flood are included Mounting: Stem mounted, must specify length in 12" increments Finishes: Black, Silver or Bright White Optional Remote Emergency: NEPK-07LEDUNV: 7W Emergency LED Driver with Remote Test Switch - [NYLM-2SC](https://noralighting.com/product/nylm-2sc/) - iLENE Mini Cylinders are available in three sizes and lumen outputs. Using Cree COB LED technology, each iLENE includes three field changeable optics for spot, narrow flood and flood beam spreads. The optics are deep set for excellent visual comfort. The canopy mounted driver allows for cool operation and optional driver and dimming options. FEATURES Architectural die-cast aluminum construction and style Cree COB LED Technology Deep set optics Dimmable (Triac, ELV or 0-10V) Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 1000lm / 15W CCT: 2700K, 3000K, 3500K, 4000K or Comfort Dim (3100K to 2000K) Field Changeable Optics: Spot, Narrow Flood and Flood are included Mounting: Surface Mounted Finishes: Black, Silver or White Optional Accessories: NEPK-07LEDUNV: 7W Emergency LED Driver with Remote Test Switch NYLM-2CONE: Cone Accessory - [NYLM-2ST](https://noralighting.com/product/nylm-2st/) - iLENE Mini Cylinders are available in three sizes and lumen outputs. Using Cree COB LED technology, each iLENE includes three field changeable optics for spot, narrow flood and flood beam spreads. The optics are deep set for excellent visual comfort. The canopy mounted driver allows for cool operation and optional driver and dimming options. FEATURES Architectural die-cast aluminum construction and style Cree COB LED Technology Deep set optics Dimmable (Triac, ELV or 0-10V) Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 1000lm / 15W CCT: 2700K, 3000K, 3500K, 4000K or Comfort Dim (3100K to 2000K) Field Changeable Optics: Spot, Narrow Flood and Flood are included Mounting: Stem mounted, must specify length in 12" increments Finishes: Black, Silver or White Optional Accessories: NEPK-07LEDUNV: 7W Emergency LED Driver with Remote Test Switch NYLM-2CONE: Cone Accessory - [NYLM-2C](https://noralighting.com/product/nylm-2c/) - iLENE Mini Cylinders are available in three sizes and lumen outputs. Using Cree COB LED technology, each iLENE includes three field changeable optics for spot, narrow flood and flood beam spreads. The optics are deep set for excellent visual comfort. The canopy mounted driver allows for cool operation and optional driver and dimming options. FEATURES Architectural die-cast aluminum construction and style Cree COB LED Technology Deep set optics Dimmable (Triac, ELV or 0-10V) Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 1000lm / 15W CCT: 2700K, 3000K, 3500K, 4000K or Comfort Dim (3100K to 2000K) Field Changeable Optics: Spot, Narrow Flood and Flood are included Mounting: 8' Aircraft Cable (field adjustable) Finishes: Black, Silver or White Optional Accessories: NEPK-07LEDUNV: 7W Emergency LED Driver with Remote Test Switch NYLM-2CONE: Cone Accessory - [NYLM-3SC](https://noralighting.com/product/nylm-3sc/) - iLENE Mini Cylinders are available in three sizes and lumen outputs. Using Cree COB LED technology, each iLENE includes three field changeable optics for spot, narrow flood and flood beam spreads. The optics are deep set for excellent visual comfort. The canopy mounted driver allows for cool operation and optional driver and dimming options. FEATURES Architectural die-cast aluminum construction and style Cree COB LED Technology Deep set optics Dimmable (Triac, ELV or 0-10V) Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 1500lm / 30W CCT: 2700K, 3000K, 3500K, 4000K or Comfort Dim (3100K to 2000K) Field Changeable Optics: Spot, Narrow Flood and Flood are included Mounting: Surface Mounted Finishes: Black, Silver or Bright White Optional Remote Emergency: NEPK-07LEDUNV: 7W Emergency LED Driver with Remote Test Switch - [NTE-845](https://noralighting.com/product/nte-845/) - Aiden High-lumen LED Track heads include field adjustable optics for precise illumination per application. Track heads can be use adjusted 350º horizontally and 90º vertically, and deliver up to 1400 lumens. Designed for use in retail, commercial and residential environments. Adjustability: 350° horizontal and 90° vertical rotation Finish: Black, Silver, or White Lumens / Wattage: 1250lm / 14W Color Rendering Index: 90 CRI Beam Spread: Spot and Flood (included) Color Temperature: 3000K Dimming: Triac or ELV - [NLWPSW-4L334W](https://noralighting.com/product/nlwpsw-4l334w/) - 48" Industrial LED wraparound includes two integral switches for lumen output and selectable color temperature. It is ideal for commercial, residential, industrial, and retail applications, such as stairwells, hallways, garages, schools, offices, and more. It is easy to install and great for replacing outdated fluorescents with an energy-efficient, cost-saving alternative. The luminaire’s lens is designed to uniformly spread and soften the appearance of the light while maximizing its distribution and output. Input Voltage: 120-277V Selectable Lumens: 7000lm / 55W; 7500lm / 60W; 8000lm / 65W Color Temperature: Selectable CCT (3000K / 3500K / 4000K) Finish: White Dimming: 0-10V Mounting Options: Surface Mount, Wall Mount or Suspended (pendant kit ordered separately) Emergency: Optional integral emergency battery with test button switch Motion Sensor: An optional internal microwave sensor can detect motion up to 17 feet away and 120° under the luminaire. Listing: cULus Listed for Damp Locations DLC Listed (Direct Linear, Stairwell and Passageway) - [NLWPSW-2L334W](https://noralighting.com/product/nlwpsw-2l334w/) - 24" Industrial LED wraparound includes two integral switches for lumen output and selectable color temperature. It is ideal for commercial, residential, industrial, and retail applications, such as stairwells, hallways, garages, schools, offices, and more. It is easy to install and great for replacing outdated fluorescents with an energy-efficient, cost-saving alternative. The luminaire’s lens is designed to uniformly spread and soften the appearance of the light while maximizing its distribution and output. Input Voltage: 120-277V Selectable Lumens: 2000lm / 16W; 2600lm / 20W; 3150lm / 34W Color Temperature: Selectable CCT (3000K / 3500K / 4000K) Finish: White Dimming: 0-10V Mounting Options: Surface Mount or Wall Mounted Listing: cULus Listed for Damp Locations DLC Listed (Direct Linear, Stairwell and Passageway) - [NLWPSWA-PK](https://noralighting.com/product/nlwpswa-pk/) - Pendant mounting kit for 4' LED Wraparound only. Includes canopy, (2) hooks and (2) aircraft cables. Cable Length: 8' Compatible Fixture: NLWPSW-4L334W: 48" LED Wraparound with Selectable Lumens & CCT - [NIOC-4RSP](https://noralighting.com/product/nioc-4rsp/) - 4" Sloped downlight adjust up to 20° for ceilings with steep pitches. Iolite can-less trims require a compatible LED module and driver box. Adjustable LED module (+/-10°) to accommodate ceiling pitches from 2/12 to 8/12. Compatible LED module: NIOC-24LED Compatible Driver Box: NJCB-12 Finishes: Black or Bright White Accessories: NIO-HC: Hex Louver NFC-R430: New Construction Frame-In with Collar - [NIOC-4RPH](https://noralighting.com/product/nioc-4rph/) - 4" Pinhole trim focuses the beam spread through small opening. Iolite can-less trims require a compatible LED module and driver box. Compatible LED module: NIOC-24LED Compatible Driver Box: NJCB-12 Finishes: Haze Pinhole / Bright White Flange or Bright White Pinhole / Bright White Flange Accessories: NIO-AS: Translucent/Opaque Deco Collars NIO-HC: Hex Louver NF-R124: Universal New Construction Frame-In NFC-R413: New Construction Frame-In with Collar - [NIOC-2RPH](https://noralighting.com/product/nioc-2rph/) - 2" Pinhole trim focuses the beam spread through small opening. Iolite can-less trims require a compatible LED module and driver box. Compatible LED module: NIOC-24LED Compatible Driver Box: NJCB-12 Finishes: HZMPW: Haze Pinhole / Bright White Flange MPW: Bright White Pinhole / Bright White Flange Accessories: NF-R124: Universal New Construction Frame-In NFC-R313: New Construction Frame-In with Collar NIO-AS: Translucent/Opaque Deco Collars NIO-HC: Hex Louver - [NIOC-2RNDC](https://noralighting.com/product/nioc-2rndc/) - 2" Deep regressed cone reflectors optimize visual cut-off. Iolite can-less trims require a compatible LED module and driver box. Compatible LED module: NIOC-24LED Compatible Driver Box: NJCB-12 Finishes: HW: Haze Reflector / Warm White Flange MPW: Bright White Reflector / Bright White Flange WW: Warm White Reflector / Warm White Flange Accessories: NF-R124: Universal New Construction Frame-In NFC-R313: New Construction Frame-In with Collar NIO-AS: Translucent/Opaque Deco Collars NIO-HC: Hex Louver - [NX-822-LEDR](https://noralighting.com/product/nx-822-ledr/) - Architectural acrylic edge-lit sign for applications requiring low-profile, yet decorative appearance. Uses included, but are not limited to museums, galleries, office building lobbies, etc. Incorporates 25+ year LED source. Red letters are 8" high and 3/4" thick to comply with NY requirements. Mounting Mounting hardware consist of 0.06 steel universal junction box bracket, 7/8" profile 0.11 die-cast aluminum bracket cover, screws, wire nuts, and silver-finished plastic plugs that are used to eliminate remaining knocouts once mounting configuration is selected. ELECTRICAL Voltage Input: Dual 120V/277V (0.038A / 0.017A) Wattage: 3 Watts normal / 5 Watts emergency operation Light Source: Long life LED sources Testing: High charge / ready operation indicator light with test button and automatic reset Circuit Protection: Isolated surge / short circuit protection (Disconnect for deep discharge) Life Expectancy: 25 Years with no change in illumination level. 5 year warranty on materials and worksmanship. Battery (NX-822-LED) Replaceable Ni-Cad battery (NED-NICAD) 90 minute emergency operation Optional Accessories NEXC-R: Replacement Red Chevrons Labels and Listings UL Listed NEC NFPA State & Municipal 5 Year Warranty on materials and worksmanship Meets City of New York emergency code requirements (NY Approved) Certified to the energy efficiency standards of California Title 20 - [NUTP71](https://noralighting.com/product/nutp71/) - *** While Supplies Last *** 24V Continuous Standard LED tape provides bright even illumination at 80 lumens per foot. Available in dedicated CCT options and producing a crisp clear 90+ CRI color. The LEDs are spaced evenly apart and tape can be cut every 4". Optional accessories, channels, and drivers make Nora's Continuous Standard LED tape excellent for small or large jobs. A terrific solution for use in cove, undercabinet, toe-kick, cabinet, back-light, and accent applications. Features · 24V system - requires Class 2 LED driver · Field cuttable every 4" and connectable with accessories · Roll includes: Tape light, power feed with DC connector, mounting clips and screws · Easy to install with pre-applied adhesive tape or clips · No soldering required Length: 20' or 100' Input Voltage: 24V Lumens / Wattage: 80lm / 1.5W per foot Color Temperature: 2700K Color Rendering Index: 90+ CRI Power Cords: NATLCFC-208/3A: 3" Hardwire Power Cord NATLCFC-209/3A: 3" Power Cord with DC connector NATLCFC-208/12A: 12" Hardwire Power Cord NATLCFC-209/12A: 12" Power Cord with DC connector NATLCFC-208/48A: 48" Hardwire Power Cord NATLCFC-209/48A: 48" Power Cord with DC connector NATLCFC-208/96A: 96" Hardwire Power Cord NATLCFC-209/96A: 96" Power Cord with DC connector Connectors: NATLCFC-200A: End-to-End Connector NATLCFC-203A: 3" Linking Cable NATLCFC-206A: 6" Linking Cable NATLCFC-212A: 12" Linking Cable NATLCFC-224A: 24" Linking Cable NATLCFC-248A: 48" Linking Cable NATLCFC-272A: 72" Linking Cable NATLCFC-296A: 96" Linking Cable Channels: NATL-C23: 4' Shallow Recessed Channel NATL-C24: 4' Shallow Channel NATL-C25: 4' Deep Recessed Channel NATL-C26: 4' Deep Channel NATL-C27: 4' J-Style Channel NATL-C28: 4' Corner Channel NATHR-680: 4' Channel without Lens NATHR-685: Clear Mounting Clips 24V Drivers: NATL-524W: 120V/24V 24W Plug-In Driver NATL-545W: 120V/24V 45W Plug-In Driver NATL-596W: 120V/24V 96W Plug-In Driver NPSU-60W/24: 110-277V/24V 60W Universal Dimming Driver NPSU-96W/24: 110-277V/24V96W Universal Dimming Driver NPSU-3X96W/24: 110-277V/24V 3x96W Universal Dimming Driver NMT-48/24C2D1: 120V/24V 48W MLV Dimmable Driver NMT-303/24C2D1: 120V/24V 3x100W MLV Dimmable Driver NMT-303/24C2D2: 277V/24V 3x100W MLV Dimmable Driver NMTD-60/24D: 120-277V/24V 60W MLV Dimmable Driver with Regulator NMTD-96/24D: 120-277V/24V 96W MLV Dimmable Driver with Regulator NATL-SWEX60/24A: 120V/24V 60W NEXUS All-in-One Driver and Dimmer NATL-SWEX100/24A: 120V/24V 100W NEXUS All-in-One Driver and Dimmer - [NYUD-3](https://noralighting.com/product/nyud-3/) - Architectural grade ADA Compliant up-and-down wall mount cylinder with dedicated LED attached to a deep cone reflector for optimal visual comfort. This minimalist yet versatile design can be changed to single direction or up & downlight. Cylinders also include a selectable CCT switch located on the cover plate. Features Two built-in switches to control direction of light and color temperature Selectable CCT (3000K / 4000K / 5000K) Versatile up-and-down lighting design (up, down or both) ADA compliant Suitable for Indoor/Outdoor applications 3 Step SDCM cETLus listed for outdoor wet locations IP65 rated Input Voltage: 120-277VAC Lumens / Wattage: 1500lm per direction / 35W Color Temperature: Selectable CCT (3000K / 4000K / 5000K) Dimming: Triac / ELV / 0-10V Finish: Black, Bronze, or White Mounting: Cylinder is supplied with hardware to mount directly over junction box. Emergency: NEPK-20LEDUNV: Remote Mounted Emergency Driver - [NEFLINTW-6OR-MPW](https://noralighting.com/product/neflintw-6or-mpw/) - 6" Oversize ring covers ceiling cut-outs up to 7-1/4". Simply place an oversized ring between the ceiling and the luminaire. Finish: White Compatible Luminaires: NCSC-R6W2TWMPW: 6" Contractor Series Can-less Wafer Downlight NFLAT-R6TW: 6" FLAT Non-Metallic Can-less Downlight NEFLINTW-R6MPW: 6" FLIN Regressed Can-less Downlight - [NEFLINTW-4OR-MPW](https://noralighting.com/product/neflintw-4or-mpw/) - 4" Oversize ring covers ceiling cut-outs up to 5-1/4". Simply place an oversized ring between the ceiling and the luminaire. Finish: White Compatible Luminaires: NCSC-R4W2TWMPW: 4" Contractor Series Can-less Wafer Downlight NFLAT-R4TWMPW: 4" FLAT Non-Metallic Can-less Downlight NEFLINTW-R4MPW: 4" FLIN Regressed Can-less Downlight - [NTE-866](https://noralighting.com/product/nte-866/) - MAX XL LED track heads deliver 3650 lumens, ideal for higher ceilings and commercial applications. Luminaires include Cree® COB LED technology with TIR optics that can be specified in three beam angles. Constructed of extruded and machined aluminum, the heat-sink and integrated driver housing provide a sleek and modern look, designed to quietly compliment any space. Features Dedicated CCT (2700K, 3000K, 3500K, 4000K) Deliver up to 3650 lumens Available in spot, narrow flood or flood beam spreads Integral dimmable driver Adjustability: 359° horizontal and 90° vertical rotation Lumens / Wattage: Up to 3650lm / 38W Color Rendering Index: 90+ CRI Beam Spread: 24° Spot, 34° Narrow Flood or 60° Flood Color Temperature: Dedicated CCT (2700K, 3000K, 3500K, 4000K) Dimming: Triac or ELV Accessories: NT-366: Round Monopoint Canopy NT-319: Square Monopoint Canopy - [NL-3365](https://noralighting.com/product/nl-3365/) - Addjustable gimbal ring allows lamp to adjust up to 35°. Lamp: Low Voltage: 20W-50W 12V MR16 - [NCHR3-8](https://noralighting.com/product/nchr3-8/) - Remodel Frame-In for 8" Sapphire III COB LED downlights includes three steel springs to secure the collar to the ceiling. Input Voltage: 120V or 120-277V Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Reflectors: NC3-81 = 8" Open Reflector NC3-88 = 8" Decorative Glass Reflector Emergency Options: 6W emergency driver with remote or integral test switch (integral compatible with NC3-81 only). Remodel frame-in is also compatible with a 7W remote emergency driver and test switch (NEPK-07LEDUNV), which requires ceiling access. - [NCH3-8](https://noralighting.com/product/nch3-8/) - New Construction Frame-In for 8" Sapphire III COB LED downlights includes universal brackets and bar hangers that can be adjusted on either side of the flat frame. Input Voltage: 120V or 120-277V Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Reflectors: NC3-81 = 8" Open Reflector NC3-88 = 8" Decorative Glass Reflector Emergency Options: 6W or 7W emergency driver with remote or integral test switch (integral compatible with NC3-81 only) - [NCHR3-6](https://noralighting.com/product/nchr3-6/) - Remodel Frame-In for 6" Sapphire III COB LED downlights includes three steel springs to secure the collar to the ceiling. Input Voltage: 120V or 120-277V Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Reflectors: NC3-61 = 6" Open Reflector NC3-66 = 6" Wall Wash Reflector NC3-68 = 6" Decorative Glass Reflector Emergency Options: 6W emergency driver with remote or integral test switch (integral compatible with NC3-61 only). Remodel frame-in is also compatible with a 7W remote emergency driver and test switch (NEPK-07LEDUNV), which requires ceiling access. - [NCH3-6](https://noralighting.com/product/nch3-6/) - New Construction Frame-In for 6" Sapphire III COB LED downlights includes universal brackets and bar hangers that can be adjusted on either side of the flat frame. Input Voltage: 120V or 120-277V Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Reflectors: NC3-61 = 6" Open Reflector NC3-66 = 6" Wall Wash Reflector NC3-68 = 6" Decorative Glass Reflector Emergency Options: 6W or 7W emergency driver with remote or integral test switch (integral compatible with NC3-61 only) - [NCHR3-4](https://noralighting.com/product/nchr3-4/) - Remodel Frame-In for 4" Sapphire III COB LED downlights includes three steel springs to secure the collar to the ceiling. Input Voltage: 120V or 120-277V Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Reflectors: NC3-41 = 4" Open Reflector NC3-46 = 4" Wall Wash Reflector NC3-48 = 4" Decorative Glass Reflector Emergency Options: 6W emergency driver with remote or integral test switch (integral compatible with NC3-41 only). Remodel frame-in is also compatible with a 7W remote emergency driver and test switch (NEPK-07LEDUNV), which requires ceiling access. - [NCH3-4](https://noralighting.com/product/nch3-4/) - New Construction Frame-In for 4" Sapphire III COB LED downlights includes universal brackets and bar hangers that can be adjusted on either side of the flat frame. Input Voltage: 120V or 120-277V Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Reflectors: NC3-41 = 4" Open Reflector NC3-46 = 4" Wall Wash Reflector NC3-48 = 4" Decorative Glass Reflector Emergency Options: 6W or 7W emergency driver with remote or integral test switch (integral compatible with NC3-41 only) - [NSW-843](https://noralighting.com/product/nsw-843/) - Long-lasting, energy-efficient LED step lights provide illumination for safety around steps, balcony areas, or walkways. Each step light includes five color temperatures, allowing the end user to decide the desired appearance. Durable cast zinc-magnesium face plates available in three finishes to match almost any decor. Efficient LED light sources are low-maintenance, offer 50,000-hour lamp life, and save over 80% in running costs compared to 18W incandescent step lights. Input Voltage: 120-277V Lumens / Wattage: 144lm / 4.6W Color Temperature: Selectable CCT (1800K / 2700K / 3000K / 4000K / 5000K) Dimming: Triac or ELV Housing: NSW-800 required - [NSW-842](https://noralighting.com/product/nsw-842/) - Long-lasting, energy-efficient LED step lights provide illumination for safety around steps, balcony areas, or walkways. Each step light includes five color temperatures, allowing the end user to decide the desired appearance. Durable cast zinc-magnesium face plates available in three finishes to match almost any decor. Efficient LED light sources are low-maintenance, offer 50,000-hour lamp life, and save over 80% in running costs compared to 18W incandescent step lights. Input Voltage: 120-277V Lumens / Wattage: 166lm / 4.6W Color Temperature: Selectable CCT (1800K / 2700K / 3000K / 4000K / 5000K) Dimming: Triac or ELV Housing: NSW-800 required - [NSW-841](https://noralighting.com/product/nsw-841/) - Long-lasting, energy-efficient LED step lights provide illumination for safety around steps, balcony areas, or walkways. Each step light includes five color temperatures, allowing the end user to decide the desired appearance. Durable cast zinc-magnesium face plates available in three finishes to match almost any decor. Efficient LED light sources are low-maintenance, offer 50,000-hour lamp life, and save over 80% in running costs compared to 18W incandescent step lights. Input Voltage: 120-277V Lumens / Wattage: 127lm / 4.6W Color Temperature: Selectable CCT (1800K / 2700K / 3000K / 4000K / 5000K) Dimming: Triac or ELV Housing: NSW-800 required - [NE-832](https://noralighting.com/product/ne-832/) - In special situations where emergency lights require mounting away from a standard power source, Nora offers both single and dual remote emergency lighting heads. Either fixture will connect to a standard 6V or 12V emergency backup battery installed in most emergency, exit, or combination fixtures. BODY Double Head Width: 12-1/2" Height: 6-1/8" Depth: 7" FEATURES Fully adjustable double heads Injection molded thermoplastic housing Fully adjustable, glare free light heads with positive positioning lock 5" diameter canopy matching round mounting plate for 3" or 4" box standard 6W lamp included Available in 6 volt or 12 volt - [NE-831](https://noralighting.com/product/ne-831/) - In special situations where emergency lights require mounting away from a standard power source, Nora offers both single and dual remote emergency lighting heads. Either fixture will connect to a standard 6V or 12V emergency backup battery installed in most emergency, exit, or combination fixtures. BODY Single Head Width: 4-7/8" Height: 7-1/8" Depth: 7" FEATURES Fully adjustable single head Injection molded thermoplastic housing Fully adjustable, glare free light head with positive positioning lock 5" diameter canopy matching round mounting plate for 3" or 4" box standard 6W lamp included Available in 6 volt or 12 volt - [NM1-RSS](https://noralighting.com/product/nm1-rss/) - *** While Supplies Last *** Round stainless steel trim for NM1-170. Easy install to threaded LED module, no tools are required. Finish: Black Compatible Luminaire: NM1-170: 1" 12V M1 LED Downlight - [NFC-R375](https://noralighting.com/product/nfc-r375/) - New construction frame-in with collar for pre-wiring and easier layout planning. Dimensions: 11.94" x 7.68" Compatible Fixtures: NIOC-4RTLNDC: 4" Iolite Can-less Trimless Downlight NIOC-4RTLSLA: 4" Iolite Can-less Trimless Adjustable Slot NMC-4RTWMPW: 4" M-Curve Can-less Adjustable LED Downlight NM4-RDC: 4" M4 LED Round Downlight - [NF-R124](https://noralighting.com/product/nf-r124/) - Universal new construction frame-in can be used to assist installing can-less recessed downlighting. Helps indicate wiring location and cutting guide. Includes multiple cut outs for 1", 2" and 4" Iolite Can-less LED downlights. Compatible Luminaires: NIOC-1RNB: 1" Iolite Can-less Round Bullnose NIOC-1RNG: 1" Iolite Can-less Round Downlight NIOC-1SNG: 1" Iolite Can-less Square Downlight NIOC-2RNB: 2" Iolite Can-less Round Bullnose NIOC-2RNDC: 2" Iolite Can-less Round Downlight NIOC-2RPH: 2" Iolite Can-less Round Pinhole NIOC-2SNDSQ: 2" Iolite Can-less Square Downlight NIOC-4RNB: 4" Iolite Can-less Round Bullnose NIOC-4RNDC: 4" Iolite Can-less Round Downlight NIOC-4RPH: 4" Iolite Can-less Round Pinhole NIOC-4RSLA: 4" Iolite Can-less Round Adjustable Slot NIOC-4SNDSQ: 4" Iolite Can-less Square Downlight NMW-4: 4" M-Wave Can-less Downlight - [NULBA-139P](https://noralighting.com/product/nulba-139p/) - Cord and plug power cord used to connect the luminaire to an outlet. Cable Length: 39" Compatible Fixtures: NULB120 Finish: White - [NULBA-139P-90](https://noralighting.com/product/nulba-139p-90/) - Cord and plug power cord used to connect the luminaire to an outlet at 90° angle. Cable Length: 39" Compatible Fixtures: NULB120 Finish: White - [NULBA-160H](https://noralighting.com/product/nulba-160h/) - 60" Power cord used to connect luminaire to junction box. Cable Length: 60" Compatible Fixtures: NULB120 Finish: White - [NULBA-196H](https://noralighting.com/product/nulba-196h/) - 96" Power cord used to connect luminaire to junction box. Cable Length: 96" Compatible Fixtures: NULB120 Finish: White - [NULBA-200](https://noralighting.com/product/nulba-200/) - Connects two luminaires seamlessly Compatible Fixtures: NULB120 Finish: White - [NULBA-206](https://noralighting.com/product/nulba-206/) - A 6" Linking cable is used to connect two luminaires. Compatible Fixtures: NULB120 Finish: White - [NULBA-CAP](https://noralighting.com/product/nulba-cap/) - A rubber end cap is used to cover the open end of a luminaire. Compatible Fixtures: NULB120 Finish: White - [NULBA-MB](https://noralighting.com/product/nulba-mb/) - Pair of flat mounting brackets used to mount luminaire to the surface. Includes two screws. Compatible Fixtures: NULB120 - [NULBA-MB60](https://noralighting.com/product/nulba-mb60/) - Pair of swivel mounting brackets used to angle luminaire on a surface. Includes two screws. Compatible Fixtures: NULB120 - [NULBA-MP](https://noralighting.com/product/nulba-mp/) - A pair of metal plates is used to mount a luminaire to the surface with internal magnets. Includes two screws. Compatible Fixtures: NULB120 - [NULB120-06LED](https://noralighting.com/product/nulb120-06led/) - 120V LED Lightbar creates a uniform seamless line of light, with internal magnets for easy installation. Producing up to 200 lumens per foot in 3000K, the lightbar is a perfect solution for under cabinet, in cabinet, cove, display, and task applications. A variety of connectors and accessories allow luminaires to be connected up to 40'. Length: 6" Input Voltage: 120V Lumens / Wattage: 100lm / 1.5W Color Temperature: 3000K Color Rendering Index: 90+ CRI Finish: White Maximum Run Length: 40' - [NULB120-12LED](https://noralighting.com/product/nulb120-12led/) - 120V LED Lightbar creates a uniform seamless line of light, with internal magnets for easy installation. Producing up to 200 lumens per foot in 3000K, the lightbar is a perfect solution for under cabinet, in cabinet, cove, display, and task applications. A variety of connectors and accessories allow luminaires to be connected up to 40'. Length: 12" Input Voltage: 120V Lumens / Wattage: 200lm / 3W Color Temperature: 3000K Color Rendering Index: 90+ CRI Finish: White Maximum Run Length: 40' - [NULB120-24LED](https://noralighting.com/product/nulb120-24led/) - 120V LED Lightbar creates a uniform seamless line of light, with internal magnets for easy installation. Producing up to 200 lumens per foot in 3000K, the lightbar is a perfect solution for under cabinet, in cabinet, cove, display, and task applications. A variety of connectors and accessories allow luminaires to be connected up to 40'. Length: 24" Input Voltage: 120V Lumens / Wattage: 400lm / 6W Color Temperature: 3000K Color Rendering Index: 90+ CRI Finish: White Maximum Run Length: 40' - [NULB120-48LED](https://noralighting.com/product/nulb120-48led/) - 120V LED Lightbar creates a uniform seamless line of light, with internal magnets for easy installation. Producing up to 200 lumens per foot in 3000K, the lightbar is a perfect solution for under cabinet, in cabinet, cove, display, and task applications. A variety of connectors and accessories allow luminaires to be connected up to 40'. Length: 48" Input Voltage: 120V Lumens / Wattage: 800lm / 12W Color Temperature: 3000K Color Rendering Index: 90+ CRI Finish: White Maximum Run Length: 40' - [NLOPAC-R7MS](https://noralighting.com/product/nlopac-r7ms/) - *** While Supplies Last: Replacement Item: NLOPAC-R7MSTW *** The AC Opal Montion Sensor LED Series is designed to surface mount over a standard junction box. The low profile luminaire produces even illumination and integral PIR sensor activates when motion is detected. After 3 minutes of no motion, the fixture automatically turns off. Features: Surface mounts to most standard junction boxes PIR (passive infrared) motion sensor for easy on/off operation PIR sensor can detect motion up to 16' diameter pattern at 8' mounting height Retrofit into an existing recessed housing with torsion spring kit (ordered separately) Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Lumens / Wattage: 1050lm / 15W Color Temperature: 4000K Color Rendering Index: 90+ Finish: White Optional Accessories: NLOPAC-56RECKIT-2 = Retrofit Kit for mounting on 5" or 6" recessed housings - [NIO-4SNDSQ](https://noralighting.com/product/nio-4sndsq/) - 4” Iolite luminaires can be specified for use with Iolite new construction or remodel housings. Deep regressed cone reflectors optimize visual cut-off. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1000lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1500lm / 20W (NHIOICD-415, NHIOICDCP-415) 2000lm / 24W (NHIOICD-420, NHIOICDCP-420) 2500lm / 28W (NHIOICD-425, NHIOICDCP-425) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot - [NTE-855BD](https://noralighting.com/product/nte-855bd/) - *** While Supplies Last *** Adjustable barn door accessory for track heads. No accessory holder is required. Features Adjustable doors Can be used to focus light or cut off glare No accessory holder required Finish: Black Compatible Track Heads: NTE-855: Jason Round LED Track Head NTE-865: MAX LED Track Head NTH-920: PAR20 Architectural Cylinder Track Head - [NATLCB-708-L](https://noralighting.com/product/natlcb-708-l/) - A power cord connects the tape light to a compatible 24VDC LED driver. Length: 12" Compatible Tape Light: NUTP14: 24V COB High Output LED Tape Light (450lm/ft.) NUTP15: 24V COB Standard Output LED Tape Light (200lm/ft.) - [NUTP14](https://noralighting.com/product/nutp14/) - 24V COB LED Tape creates a uniform seamless line of light without additional diffused covers or accessories. Producing over 450 lumens per foot in dedicated color temperatures, tape light is a perfect solution for low clearance or reflective surfaces to eliminate all glare or dotting. Features · 24V system - required Class 2 LED driver · Seamless COB eliminates LED dotting · Field cuttable every 1.79" and connectable with accessories · Roll includes: Tape light, power feed with DC connector, mounting clips and screws · Easy to install with pre-applied adhesive tape or clips · Compatible with NEXUS (Driver/Dimmer All-in-One) · cULus Listed for indoor dry locations (IP20 rated) Length: 16.4' or 100' (16.4' maximum run length) Input Voltage: 24V Lumens / Wattage: 450lm / 4.5W per foot (Also available in 210lm / 2.4W per foot, Click Here for more information) Color Temperature: 2700K, 3000K, 3500K or 4000K Color Rendering Index: 90+ CRI Accessories: NATLCB-TB: Terminal Block for Tape-to-Wire NATLCB-TB/60: Terminal Block for Tape-to-Wire with 60" Cord NATLCB-708-L: 12" Hardwire Power Cord NATLCB-708/BC: 6" Power Cord with Power Line Connector NATLCB-TB707: Terminal Block for Tape-to-Tape NATLCB-707: End-to-End Connector NATLCB-703: 3" Linking Cable NATLCB-706: 6" Linking Cable NATLCB-718: 18" Linking Cable NATLCB-736: 36" Linking Cable NATLCB-772: 72" Linking Cable NATLCB-L: L Connector NATLCB-T: T Connector NATLCB-X: X Connector Channels: NATL-C23: 4' Shallow Recessed Channel NATL2-C23: 4' Shallow Recessed Channel NATL-C24: 4' Shallow Channel NATL2-C24: 4' Shallow Channel NATL-C25: 4' Deep Recessed Channel NATL2-C25: 4' Deep Recessed Channel NATL-C26: 4' Deep Channel NATL2-C26: 4' Deep Channel NATL-C27: 4' J-Style Channel NATL-C28: 4' Corner Channel NATL2-C29: 4' Trimless Recessed Channel NATLCB-709: Clear Mounting Clips 24V Drivers: NATL-524W: 120V/24V 24W Plug-In Driver NATL-545W: 120V/24V 45W Plug-In Driver NATL-596W: 120V/24V 96W Plug-In Driver NPSU-60W/24: 110-277V/24V 60W Universal Dimming Driver NPSU-96W/24: 110-277V/24V96W Universal Dimming Driver NPSU-3X96W/24: 110-277V/24V 3x96W Universal Dimming Driver NMT-48/24C2D1: 120V/24V 48W MLV Dimmable Driver NMT-303/24C2D1: 120V/24V 3x100W MLV Dimmable Driver NMT-303/24C2D2: 277V/24V 3x100W MLV Dimmable Driver NMTD-60/24D: 120-277V/24V 60W MLV Dimmable Driver with Regulator NMTD-96/24D: 120-277V/24V 96W MLV Dimmable Driver with Regulator NATL-SWEX60/24A: 120V/24V 60W NEXUS All-in-One Driver and Dimmer NATL-SWEX100/24A: 120V/24V 100W NEXUS All-in-One Driver and Dimmer - [NUTP15](https://noralighting.com/product/nutp15/) - 24V COB LED Tape creates a uniform seamless line of light without additional diffused covers or accessories. Producing over 450 lumens per foot in dedicated color temperatures, tape light is a perfect solution for low clearance or reflective surfaces to eliminate all glare or dotting. Features · 24V system - required Class 2 LED driver · Seamless COB eliminates LED dotting · Field cuttable every 1.79" and connectable with accessories · Roll includes: Tape light, power feed with DC connector, mounting clips and screws · Easy to install with pre-applied adhesive tape or clips · Compatible with NEXUS (Driver/Dimmer All-in-One) · cULus Listed for indoor dry locations (IP20 rated) Length: 16.4' or 100' (40' maximum run length) Input Voltage: 24V Lumens / Wattage: 210lm / 2.4W per foot (Also available in 450lm / 4.5W per foot, Click Here for more information) Color Temperature: 2700K, 3000K, 3500K or 4000K Color Rendering Index: 90+ CRI Accessories: NATLCB-TB: Terminal Block for Tape-to-Wire NATLCB-TB/60: Terminal Block for Tape-to-Wire with 60" Cord NATLCB-708-L: 12" Hardwire Power Cord NATLCB-708/BC: 6" Power Cord with Power Line Connector NATLCB-TB707: Terminal Block for Tape-to-Tape NATLCB-707: End-to-End Connector NATLCB-703: 3" Linking Cable NATLCB-706: 6" Linking Cable NATLCB-718: 18" Linking Cable NATLCB-736: 36" Linking Cable NATLCB-772: 72" Linking Cable NATLCB-L: L Connector NATLCB-T: T Connector NATLCB-X: X Connector Channels: NATL-C23: 4' Shallow Recessed Channel NATL2-C23: 4' Shallow Recessed Channel NATL-C24: 4' Shallow Channel NATL2-C24: 4' Shallow Channel NATL-C25: 4' Deep Recessed Channel NATL2-C25: 4' Deep Recessed Channel NATL-C26: 4' Deep Channel NATL2-C26: 4' Deep Channel NATL-C27: 4' J-Style Channel NATL-C28: 4' Corner Channel NATL2-C29: 4' Trimless Recessed Channel NATLCB-709: Clear Mounting Clips 24V Drivers: NATL-524W: 120V/24V 24W Plug-In Driver NATL-545W: 120V/24V 45W Plug-In Driver NATL-596W: 120V/24V 96W Plug-In Driver NPSU-60W/24: 110-277V/24V 60W Universal Dimming Driver NPSU-96W/24: 110-277V/24V96W Universal Dimming Driver NPSU-3X96W/24: 110-277V/24V 3x96W Universal Dimming Driver NMT-48/24C2D1: 120V/24V 48W MLV Dimmable Driver NMT-303/24C2D1: 120V/24V 3x100W MLV Dimmable Driver NMT-303/24C2D2: 277V/24V 3x100W MLV Dimmable Driver NMTD-60/24D: 120-277V/24V 60W MLV Dimmable Driver with Regulator NMTD-96/24D: 120-277V/24V 96W MLV Dimmable Driver with Regulator NATL-SWEX60/24A: 120V/24V 60W NEXUS All-in-One Driver and Dimmer NATL-SWEX100/24A: 120V/24V 100W NEXUS All-in-One Driver and Dimmer - [NMRT-652](https://noralighting.com/product/nmrt-652/) - Metal trim with adjustable gimbal can be rotated 45º. Finishes: Black Face, White Flange (BW), Silver Face, Silver Flange (SS), White Face, White Flange (WW) Mounting: Trims include two "V" torsion springs to mount trim securely to housing. Compatible Housings: NMRI Series (Line Voltage) Lamps: Line Voltage: 75W PAR30 Maximum Adjustment: 45º Item Numbers: NMRT-11652 - Linear Configuration / 1 Lamp NMRT-12652 - Linear Configuration / 2 Lamps NMRT-13652 - Linear Configuration / 3 Lamps - [NMRT-653](https://noralighting.com/product/nmrt-653/) - Metal trim with adjustable gimbal can be rotated 45º. - [NMRT-628](https://noralighting.com/product/nmrt-628/) - Metal trim with adjustable eyeball can be rotated 45º. Finishes: Black Face, White Flange (BW), Silver Face, Silver Flange (SS), White Face, White Flange (WW) Mounting: Trims include two "V" torsion springs to mount trim securely to housing. Compatible Housings: NMRI Series (Line Voltage) Lamps: Line Voltage: 75W PAR30 Maximum Adjustment: 45º Item Numbers: NMRT-11628 - Linear Configuration / 1 Lamp NMRT-12628 - Linear Configuration / 2 Lamps NMRT-13628 - Linear Configuration / 3 Lamps - [NRM3-43](https://noralighting.com/product/nrm3-43/) - Marquise III COB Series enhances an established series of downlighting with the latest COB technology by Signify®. The COB allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. Lumens / Wattage: Up to 2500lm / 26W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Compatible Housings: The reflector is only compatible with Marquise III housings manufactured by Nora Lighting. NHMIC3-4 (4" IC New Construction) NHRMIC3-4 (4" IC Remodel) NHMICD3-4 (4" IC Double Wall) Listing: - cULus Listed for Wet Locations when used with compatible housing - 5-Year Limited Warranty - [NLUD-X334](https://noralighting.com/product/nlud-x334/) - X shaped L-Line Indirect/Direct luminaires offer a clean and modern appearance with a sleek extruded aluminum housing. Symmetrical light distribution evenly illuminate surfaces with a diffused lens, making L-Line ideal for commercial, retail, healthcare and education applications. Luminaires can be daisy chained with linear, L, T luminaires or installed separately. Luminaire can only be pendant mounted. Input Voltage: 120-347V Lumens / Wattage: 6028lm / 50W (4234lm Direct / 1793lm Indirect) Color Temperature: Selectable CCT (3000K / 3500K / 4000K) Finish: Aluminum, Black or White Dimming: 0-10V Accessories: NLUD-CC: Aircraft Mounting Mounting Kit NLUD-PCC: Pendant & Power Mounting Kit NLUD-PMC: Daisy Chain Bracket for Pendant Mount NLUD-LENS/33: 33-ft. Continuous Lens (field cuttable) Option: Motion Sensor Listing: cETLus Listed for Damp Locations - [NLUD-T334](https://noralighting.com/product/nlud-t334/) - T shaped L-Line Indirect/Direct luminaires offer a clean and modern appearance with a sleek extruded aluminum housing. Symmetrical light distribution evenly illuminate surfaces with a diffused lens, making L-Line ideal for commercial, retail, healthcare and education applications. Luminaires can be daisy chained with linear, L, X luminaires or installed separately. Luminaire can only be pendant mounted. Input Voltage: 120-347V Lumens / Wattage: 5027lm / 40W (3511lm Direct / 1516lm Indirect) Color Temperature: Selectable CCT (3000K / 3500K / 4000K) Finish: Aluminum, Black or White Dimming: 0-10V Accessories: NLUD-CC: Aircraft Mounting Mounting Kit NLUD-PCC: Pendant & Power Mounting Kit NLUD-PMC: Daisy Chain Bracket for Pendant Mount NLUD-LENS/33: 33-ft. Continuous Lens (field cuttable) Option: Motion Sensor Listing: cETLus Listed for Damp Locations - [NLUD-L334](https://noralighting.com/product/nlud-l334/) - L shaped L-Line Indirect/Direct luminaires offer a clean and modern appearance with a sleek extruded aluminum housing. Symmetrical light distribution evenly illuminate surfaces with a diffused lens, making L-Line ideal for commercial, retail, healthcare and education applications. Luminaires can be daisy chained with linear, T, X luminaires or installed separately. Luminaire can only be pendant mounted. Input Voltage: 120-347V Lumens / Wattage: 3781lm / 30W (2615lm Direct / 1166lm Indirect) Color Temperature: Selectable CCT (3000K / 3500K / 4000K) Finish: Aluminum, Black or White Dimming: 0-10V Accessories: NLUD-CC: Aircraft Mounting Mounting Kit NLUD-PCC: Pendant & Power Mounting Kit NLUD-PMC: Daisy Chain Bracket for Pendant Mount NLUD-LENS/33: 33-ft. Continuous Lens (field cuttable) Option: Motion Sensor Listing: cETLus Listed for Damp Locations - [NIO-AS](https://noralighting.com/product/nio-as/) - Translucent decorative collars fill the aperture with the specified color while producing white general downlighting. Collars are available in different lengths. Use to add interest, create a theme, match a theme or define a space. Opaque decorative collars reduce aperture brightness while preserving light output. Depth: 5/8", 3/4", 1" Translucent Finish: Blue, Frosted, Amber, Red Opaque Finish: Black, Bright White, Warm White Compatible Fixtures: NIO-2: 2″ Iolite Dedicated Trimless Downlights NIOB-2: 2″ Iolite Dedicated Flanged Downlights NIOC-2: 2″ Iolite Can-less Trims NIO-4: 4″ Iolite Dedicated Downlights NIOC-4: 4″ Iolite Can-less Trims NPR-4: 4" Pearl 120V Retrofit Downlights NPRLV-4: 4" Pearl 12V Retrofit Downlights NPR-56: 5"/6" Pearl 120V Retrofit Downlights NPRLV-56: 5"/6" Pearl 12V Retrofit Downlights - [NQZ2-6R-F](https://noralighting.com/product/nqz2-6r-f/) - A new construction frame-in with a junction box and collar to assist in installing 4" can-less downlights. Compatible Luminaires: NQZ2-61TWTW-MPW: 6" Quartz LED Downlight with Selectable Lumens & CCT - [NTH-682](https://noralighting.com/product/nth-682/) - Line voltage die-cast aluminum designer cube fixtures with MR16 light source. Yoke provides full adjustment of light source for special aiming and dual tightening knobs assure secure lock on angle position. Features Die-cast aluminum provides superior strength and rigidity Low profile, aesthetic design Adjustable yoke for custom aiming High-strength stainless steel electrical contacts One or two circuit track capable - [NLR-409AT](https://noralighting.com/product/nlr-409at/) - The Q4 series is designed for architectural and commercial applications. The reflectors feature aluminum die-cast construction with deep set lamp holders providing excellent visual comfort. The Q4 die-cast aluminum lamp holders help dissipate heat for longer life and can accommodate 2 filters. Minimum Clearances: Non-IC housings require a minimum clearance of 3” from thermal insulation and 1/2" from adjacent building components. Mounting: Four high tension tempered steel springs secure remodel housing to ceiling. Socket: Bi-Pin GU5.3 socket with heat shield Maximum Wattage: 50W - [NLR-604](https://noralighting.com/product/nlr-604/) - 6" low voltage housings provides crisp, defined quartz halogen illumination from MR16 light sources to any application. A wide variety of attractive adjustable trims allows fine-tuned aiming of directional light sources. Housings also available as new construction. Minimum Clearances: Non-IC housings require a minimum clearance of 3" from thermal insulation and 1/2" from adjacent building components Ceiling Thickness: Ceiling thickness varies from 5/8" - 1-3/8" Lamp Adjustment: Circular bracket on low voltage trims provides a secure snap-in hold and friction-locked aiming adjustment. UV/Shatter Guard Shield: All low voltage trims include a tempered UV/shatter shield. Installation: High tension tempered steel springs secure remodel housings evenly to ceiling; hole cutout template provided for convenience. Junction Box: Junction box is listed for through branch circuit wiring and contains six 1/2" knockouts and four Romex® pryouts with strain relief Wattage: 75W max. (actual wattage varies with trim) Lamp: 12V MR16 Listings: cULus Damp Location w/ Feed Through cULus Wet Location (Only with designated trims) - [NL-610](https://noralighting.com/product/nl-610/) - 6" White Adjustable Stepped Baffle with White Plastic Ring for Low Voltage Recessed Housings. Rated up to 75W. Compatible Housings: Low Voltage NL-601: Non-IC Air-Tight New Construction (Rated up to 50W) NLR-604: Non-IC Air-Tight Remodel (Rated up to 75W) Low Voltage Retrofit Kits NLK-2600: Non-IC Magnetic Retrofit Kit Transformer Line Voltage Retrofit Kit NRA-34/10: Non-IC Retrofit Socket / Without Lamp Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NL-665](https://noralighting.com/product/nl-665/) - 6" Surface Adjustable Round Spot with Metal Trim for Low Voltage Recessed Housings. Rated up to 75W. Compatible Housings: Line Voltage NHIC-17/100DWQA: IC Air-Tight New Construction (Rated up to 45W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 45W) NHIC-17QNBAT: IC Air-Tight New Construction w/ Floating Socket/No Bracket (Rated up to 45W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 45W) NHRIC-17QNBAT: IC Air-Tight Remodel w/ Floating Socket/No Bracket (Rated up to 45W) NH-26Q: Non-IC New Construction (Rated up to 45W) NHR-26Q: Non-IC Remodel (Rated up to 45W) NH-27Q: Shallow Non-IC New Construction (Rated up to 45W) NHR-27Q: Shallow Non-IC Remodel (Rated up to 45W) NHIC-17QAT: Shallow IC Air-Tight New Construction (Rated up to 45W) NHRIC-27QAT: Shallow IC Air-Tight Remodel (Rated up to 45W) NHRIC-27QNBAT: Shallow IC Air-Tight Remodel (Rated up to 45W) Low Voltage NL-601: Non-IC Air-Tight New Construction (Rated up to 50W) NLR-604: Non-IC Air-Tight Remodel (Rated up to 75W) Low Voltage Retrofit Kits NLK-2600: Non-IC Magnetic Retrofit Kit Transformer Line Voltage Retrofit Kit NRA-34/10: Non-IC Retrofit Socket / Without Lamp Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NL-680](https://noralighting.com/product/nl-680/) - 6" Fully Adjustable Elbow for Low Voltage Recessed Housings. Rated up to 75W. Compatible Housings: Low Voltage NL-601: Non-IC Air-Tight New Construction (Rated up to 50W) NLR-604: Non-IC Air-Tight Remodel (Rated up to 75W) Low Voltage Retrofit Kits NLK-2600: Non-IC Magnetic Retrofit Kit Transformer Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NLIC-408AT](https://noralighting.com/product/nlic-408at/) - The Q4 series is designed for architectural and commercial applications. The reflectors feature aluminum die-cast construction with deep set lamp holders providing excellent visual comfort. The Q4 die-cast aluminum lamp holders help dissipate heat for longer life and can accommodate 2 filters. Minimum Clearances: “IC” Housings are direct contact rated; no minimum clearance is required Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be repositioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Socket: Bi-Pin GU5.3 socket with heat shield Maximum Wattage: 50W - [NL-3410](https://noralighting.com/product/nl-3410/) - 3" Square Baffle with Round Aperture Precision spun 0.040 aluminum baffle with deep grooves to reduce aperture glare—non-reflective painted finish. The gimbal ring allows the lamp to be mounted on top of the trim and adjusted up to 35°. Lamp: Line Voltage: 50W 120V MR16 GU10(LED or Halogen) Low Voltage: 20W-50W 12V MR16 - [NL-413](https://noralighting.com/product/nl-413/) - 4" Round Adjustable Specular Black Reflector with Metal Ring. Rated up to 50W and compatible with LED lamps. Compatible Low Voltage Housings: NLIC-401: IC Air-Tight New Construction (Rated up to 50W) NL-401: IC New Construction (Rated up to 50W) NLR-404: Non-IC Remodel (Rated up to 50W) NL-402S: Shallow Non-IC New Construction (Rated up to 50W) NLR-403S: Shallow Non-IC Remodel (Rated up to 50W) Compatible Line Voltage Housings: NSEIC-407AT/20: IC Air-Tight New Construction (Rated up to 20W) NSERIC-407AT/20: IC Air-Tight Remodel (Rated up to 20W) NFBIC-401AT/25A: Fire Rated IC Air-Tight New Construction (Rated up to 25W) NSLIC-401AT/10: IC Air-Tight New Construction (Rated up to 50W) NSL-401AT/10: Non-IC Air-Tight New Construction (Rated up to 50W) NSLR-404AT/10: Non-IC Air-Tight Remodel (Rated up to 50W) Lamp: 12V MR16 or 120V MR16 GU10 Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NL-414](https://noralighting.com/product/nl-414/) - 4" Round Adjustable Specular Clear Reflector with White Metal Ring. Rated up to 50W and compatible with LED lamps. Compatible Low Voltage Housings: NLIC-401: IC Air-Tight New Construction (Rated up to 50W) NL-401: IC New Construction (Rated up to 50W) NLR-404: Non-IC Remodel (Rated up to 50W) NL-402S: Shallow Non-IC New Construction (Rated up to 50W) NLR-403S: Shallow Non-IC Remodel (Rated up to 50W) Compatible Line Voltage Housings: NSEIC-407AT/20: IC Air-Tight New Construction (Rated up to 20W) NSERIC-407AT/20: IC Air-Tight Remodel (Rated up to 20W) NFBIC-401AT/25A: Fire Rated IC Air-Tight New Construction (Rated up to 25W) NSLIC-401AT/10: IC Air-Tight New Construction (Rated up to 50W) NSL-401AT/10: Non-IC Air-Tight New Construction (Rated up to 50W) NSLR-404AT/10: Non-IC Air-Tight Remodel (Rated up to 50W) Lamp: 12V MR16 or 120V MR16 GU10 Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NL-4810](https://noralighting.com/product/nl-4810/) - 4" Square Trim with Round Baffle. 35° Adjustable lamp holder rated up to 50W max. Compatible Low Voltage Housings: NLIC-401: IC Air-Tight New Construction (Rated up to 50W) NL-401: IC New Construction (Rated up to 50W) NLR-404: Non-IC Remodel (Rated up to 50W) NL-402S: Shallow Non-IC New Construction (Rated up to 50W) NLR-403S: Shallow Non-IC Remodel (Rated up to 50W) Compatible Line Voltage Housings: NSEIC-407AT/20: IC Air-Tight New Construction (Rated up to 20W) NSERIC-407AT/20: IC Air-Tight Remodel (Rated up to 20W) NFBIC-401AT/25A: Fire Rated IC Air-Tight New Construction (Rated up to 25W) NSLIC-401AT/10: IC Air-Tight New Construction (Rated up to 50W) NSL-401AT/10: Non-IC Air-Tight New Construction (Rated up to 50W) NSLR-404AT/10: Non-IC Air-Tight Remodel (Rated up to 50W) Lamp: 12V MR16 or 120V MR16 GU10 Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NL-416](https://noralighting.com/product/nl-416/) - 4" Round Adjustable White Reflector with White Ring. Rated up to 50W and compatible with LED lamps. Compatible Low Voltage Housings: NLIC-401: IC Air-Tight New Construction (Rated up to 50W) NL-401: IC New Construction (Rated up to 50W) NLR-404: Non-IC Remodel (Rated up to 50W) NL-402S: Shallow Non-IC New Construction (Rated up to 50W) NLR-403S: Shallow Non-IC Remodel (Rated up to 50W) Compatible Line Voltage Housings: NSEIC-407AT/20: IC Air-Tight New Construction (Rated up to 20W) NSERIC-407AT/20: IC Air-Tight Remodel (Rated up to 20W) NFBIC-401AT/25A: Fire Rated IC Air-Tight New Construction (Rated up to 25W) NSLIC-401AT/10: IC Air-Tight New Construction (Rated up to 50W) NSL-401AT/10: Non-IC Air-Tight New Construction (Rated up to 50W) NSLR-404AT/10: Non-IC Air-Tight Remodel (Rated up to 50W) Lamp: 12V MR16 or 120V MR16 GU10 Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NL-411](https://noralighting.com/product/nl-411/) - 4" Black Adjustable Stepped Baffle for Low Voltage and Line Voltage Recessed Housings. Rated up to 75W and compatible with LED lamps. Compatible Low Voltage Housings: NLIC-401: IC Air-Tight New Construction (Rated up to 50W) NL-401: IC New Construction (Rated up to 50W) NLR-404: Non-IC Remodel (Rated up to 50W) NL-402S: Shallow Non-IC New Construction (Rated up to 50W) NLR-403S: Shallow Non-IC Remodel (Rated up to 50W) Compatible Line Voltage Housings: NSEIC-407AT/20: IC Air-Tight New Construction (Rated up to 20W) NSERIC-407AT/20: IC Air-Tight Remodel (Rated up to 20W) NFBIC-401AT/25A: Fire Rated IC Air-Tight New Construction (Rated up to 25W) NSLIC-401AT/10: IC Air-Tight New Construction (Rated up to 50W) NSL-401AT/10: Non-IC Air-Tight New Construction (Rated up to 50W) NSLR-404AT/10: Non-IC Air-Tight Remodel (Rated up to 50W) Lamp: 12V MR16 or 120V MR16 GU10 Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NL-420](https://noralighting.com/product/nl-420/) - 4" White Pinhole with Black Baffle. Rated up to 50W and compatible with LED lamps. Compatible Low Voltage Housings: NLIC-401: IC Air-Tight New Construction (Rated up to 50W) NL-401: IC New Construction (Rated up to 50W) NLR-404: Non-IC Remodel (Rated up to 50W) NL-402S: Shallow Non-IC New Construction (Rated up to 50W) NLR-403S: Shallow Non-IC Remodel (Rated up to 50W) Compatible Line Voltage Housings: NSEIC-407AT/20: IC Air-Tight New Construction (Rated up to 20W) NSERIC-407AT/20: IC Air-Tight Remodel (Rated up to 20W) NFBIC-401AT/25A: Fire Rated IC Air-Tight New Construction (Rated up to 25W) NSLIC-401AT/10: IC Air-Tight New Construction (Rated up to 50W) NSL-401AT/10: Non-IC Air-Tight New Construction (Rated up to 50W) NSLR-404AT/10: Non-IC Air-Tight Remodel (Rated up to 50W) Lamp: 12V MR16 or 120V MR16 GU10 Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NL-421](https://noralighting.com/product/nl-421/) - 4" White Pinhole with White Baffle. Rated up to 50W and compatible with LED lamps. Compatible Low Voltage Housings: NLIC-401: IC Air-Tight New Construction (Rated up to 50W) NL-401: IC New Construction (Rated up to 50W) NLR-404: Non-IC Remodel (Rated up to 50W) NL-402S: Shallow Non-IC New Construction (Rated up to 50W) NLR-403S: Shallow Non-IC Remodel (Rated up to 50W) Compatible Line Voltage Housings: NSEIC-407AT/20: IC Air-Tight New Construction (Rated up to 20W) NSERIC-407AT/20: IC Air-Tight Remodel (Rated up to 20W) NFBIC-401AT/25A: Fire Rated IC Air-Tight New Construction (Rated up to 25W) NSLIC-401AT/10: IC Air-Tight New Construction (Rated up to 50W) NSL-401AT/10: Non-IC Air-Tight New Construction (Rated up to 50W) NSLR-404AT/10: Non-IC Air-Tight Remodel (Rated up to 50W) Lamp: 12V MR16 or 120V MR16 GU10 Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NL-440](https://noralighting.com/product/nl-440/) - 4" Round Metal Trim with 1" Pinhole for Low Voltage and Line Voltage Recessed Housings. Rated up to 50W and compatible with LED lamps. Compatible Low Voltage Housings: NLIC-401: IC Air-Tight New Construction (Rated up to 50W) NL-401: IC New Construction (Rated up to 50W) NLR-404: Non-IC Remodel (Rated up to 50W) NL-402S: Shallow Non-IC New Construction (Rated up to 50W) NLR-403S: Shallow Non-IC Remodel (Rated up to 50W) Compatible Line Voltage Housings: NSEIC-407AT/20: IC Air-Tight New Construction (Rated up to 20W) NSERIC-407AT/20: IC Air-Tight Remodel (Rated up to 20W) NFBIC-401AT/25A: Fire Rated IC Air-Tight New Construction (Rated up to 25W) NSLIC-401AT/10: IC Air-Tight New Construction (Rated up to 50W) NSL-401AT/10: Non-IC Air-Tight New Construction (Rated up to 50W) NSLR-404AT/10: Non-IC Air-Tight Remodel (Rated up to 50W) Lamp: 12V MR16 or 120V MR16 GU10 Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NL-445](https://noralighting.com/product/nl-445/) - 4" Round Adjustable Slot Aperture. Rated up to 50W and compatible with LED lamps. Compatible Low Voltage Housings: NLIC-401: IC Air-Tight New Construction (Rated up to 50W) NL-401: IC New Construction (Rated up to 50W) NLR-404: Non-IC Remodel (Rated up to 50W) NL-402S: Shallow Non-IC New Construction (Rated up to 50W) NLR-403S: Shallow Non-IC Remodel (Rated up to 50W) Compatible Line Voltage Housings: NSEIC-407AT/20: IC Air-Tight New Construction (Rated up to 20W) NSERIC-407AT/20: IC Air-Tight Remodel (Rated up to 20W) NFBIC-401AT/25A: Fire Rated IC Air-Tight New Construction (Rated up to 25W) NSLIC-401AT/10: IC Air-Tight New Construction (Rated up to 50W) NSL-401AT/10: Non-IC Air-Tight New Construction (Rated up to 50W) NSLR-404AT/10: Non-IC Air-Tight Remodel (Rated up to 50W) Lamp: 12V MR16 or 120V MR16 GU10 Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NL-463](https://noralighting.com/product/nl-463/) - 4" Adjustable Gimbal with Deep Baffle for Low Voltage and Line Voltage Recessed Housings. Rated up to 50W and compatible with LED lamps. Compatible Low Voltage Housings: NLIC-401: IC Air-Tight New Construction (Rated up to 50W) NL-401: IC New Construction (Rated up to 50W) NLR-404: Non-IC Remodel (Rated up to 50W) NL-402S: Shallow Non-IC New Construction (Rated up to 50W) NLR-403S: Shallow Non-IC Remodel (Rated up to 50W) Compatible Line Voltage Housings: NSEIC-407AT/20: IC Air-Tight New Construction (Rated up to 20W) NSERIC-407AT/20: IC Air-Tight Remodel (Rated up to 20W) NFBIC-401AT/25A: Fire Rated IC Air-Tight New Construction (Rated up to 25W) NSLIC-401AT/10: IC Air-Tight New Construction (Rated up to 50W) NSL-401AT/10: Non-IC Air-Tight New Construction (Rated up to 50W) NSLR-404AT/10: Non-IC Air-Tight Remodel (Rated up to 50W) Lamp: 12V MR16 or 120V MR16 GU10 Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NL-465](https://noralighting.com/product/nl-465/) - 4" Round Surface Adjustable. Rated up to 50W and compatible with LED lamps. Compatible Low Voltage Housings: NLIC-401: IC Air-Tight New Construction (Rated up to 50W) NL-401: IC New Construction (Rated up to 50W) NLR-404: Non-IC Remodel (Rated up to 50W) NL-402S: Shallow Non-IC New Construction (Rated up to 50W) NLR-403S: Shallow Non-IC Remodel (Rated up to 50W) Compatible Line Voltage Housings: NSEIC-407AT/20: IC Air-Tight New Construction (Rated up to 20W) NSERIC-407AT/20: IC Air-Tight Remodel (Rated up to 20W) NFBIC-401AT/25A: Fire Rated IC Air-Tight New Construction (Rated up to 25W) NSLIC-401AT/10: IC Air-Tight New Construction (Rated up to 50W) NSL-401AT/10: Non-IC Air-Tight New Construction (Rated up to 50W) NSLR-404AT/10: Non-IC Air-Tight Remodel (Rated up to 50W) Lamp: 12V MR16 or 120V MR16 GU10 Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NL-467](https://noralighting.com/product/nl-467/) - 4" Adjustable Gimbal with Baffle rated up to 50W max. Compatible Low Voltage Housings: NLIC-401: IC Air-Tight New Construction (Rated up to 50W) NL-401: IC New Construction (Rated up to 50W) NLR-404: Non-IC Remodel (Rated up to 50W) NL-402S: Shallow Non-IC New Construction (Rated up to 50W) NLR-403S: Shallow Non-IC Remodel (Rated up to 50W) Compatible Line Voltage Housings: NSEIC-407AT/20: IC Air-Tight New Construction (Rated up to 20W) NSERIC-407AT/20: IC Air-Tight Remodel (Rated up to 20W) NFBIC-401AT/25A: Fire Rated IC Air-Tight New Construction (Rated up to 25W) NSLIC-401AT/10: IC Air-Tight New Construction (Rated up to 50W) NSL-401AT/10: Non-IC Air-Tight New Construction (Rated up to 50W) NSLR-404AT/10: Non-IC Air-Tight Remodel (Rated up to 50W) Lamp: 12V MR16 or 120V MR16 GU10 Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NL-470](https://noralighting.com/product/nl-470/) - 4" Round Fully Adjustable Elbow rated up to 50W max. Compatible Low Voltage Housings: NLIC-401: IC Air-Tight New Construction (Rated up to 50W) NL-401: IC New Construction (Rated up to 50W) NLR-404: Non-IC Remodel (Rated up to 50W) NL-402S: Shallow Non-IC New Construction (Rated up to 50W) NLR-403S: Shallow Non-IC Remodel (Rated up to 50W) Lamp: 12V MR16 Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NL-422](https://noralighting.com/product/nl-422/) - 4" Round Shower Trim with Albalite Lens. Rated up to 50W and compatible with LED lamps. Compatible Low Voltage Housings: NLIC-401: IC Air-Tight New Construction (Rated up to 50W) NL-401: IC New Construction (Rated up to 50W) NLR-404: Non-IC Remodel (Rated up to 50W) NL-402S: Shallow Non-IC New Construction (Rated up to 50W) NLR-403S: Shallow Non-IC Remodel (Rated up to 50W) Compatible Line Voltage Housings: NSEIC-407AT/20: IC Air-Tight New Construction (Rated up to 20W) NSERIC-407AT/20: IC Air-Tight Remodel (Rated up to 20W) NFBIC-401AT/25A: Fire Rated IC Air-Tight New Construction (Rated up to 25W) NSLIC-401AT/10: IC Air-Tight New Construction (Rated up to 50W) NSL-401AT/10: Non-IC Air-Tight New Construction (Rated up to 50W) NSLR-404AT/10: Non-IC Air-Tight Remodel (Rated up to 50W) Lamp: 12V MR16 or 120V MR16 GU10 Mounting: Trim Clips Listing: cULus Listed for Wet Location when used with Compatible Housing - [NL-426](https://noralighting.com/product/nl-426/) - 4" Round Shower Trim with Frosted Flat Lens. Rated up to 50W and compatible with LED lamps. Compatible Low Voltage Housings: NLIC-401: IC Air-Tight New Construction (Rated up to 50W) NL-401: IC New Construction (Rated up to 50W) NLR-404: Non-IC Remodel (Rated up to 50W) NL-402S: Shallow Non-IC New Construction (Rated up to 50W) NLR-403S: Shallow Non-IC Remodel (Rated up to 50W) Compatible Line Voltage Housings: NSEIC-407AT/20: IC Air-Tight New Construction (Rated up to 20W) NSERIC-407AT/20: IC Air-Tight Remodel (Rated up to 20W) NFBIC-401AT/25A: Fire Rated IC Air-Tight New Construction (Rated up to 25W) NSLIC-401AT/10: IC Air-Tight New Construction (Rated up to 50W) NSL-401AT/10: Non-IC Air-Tight New Construction (Rated up to 50W) NSLR-404AT/10: Non-IC Air-Tight Remodel (Rated up to 50W) Lamp: 12V MR16 or 120V MR16 GU10 Mounting: Trim Clips Listing: cULus Listed for Wet Location when used with Compatible Housing - [NL-4855](https://noralighting.com/product/nl-4855/) - 4" Square Reflector with 2" Square Pinhole. Rated up to 50W and compatible with LED lamps. Compatible Low Voltage Housings: NLIC-401: IC Air-Tight New Construction (Rated up to 50W) NL-401: IC New Construction (Rated up to 50W) NLR-404: Non-IC Remodel (Rated up to 505W) NL-402S: Shallow Non-IC New Construction (Rated up to 50W) NLR-403S: Shallow Non-IC Remodel (Rated up to 50W) Compatible Line Voltage Housings: NSEIC-407AT/20: IC Air-Tight New Construction (Rated up to 20W) NSERIC-407AT/20: IC Air-Tight Remodel (Rated up to 20W) NFBIC-401AT/25A: Fire Rated IC Air-Tight New Construction (Rated up to 25W) NSLIC-401AT/10: IC Air-Tight New Construction (Rated up to 50W) NSL-401AT/10: Non-IC Air-Tight New Construction (Rated up to 50W) NSLR-404AT/10: Non-IC Air-Tight Remodel (Rated up to 50W) Lamp: 12V MR16 or 120V MR16 GU10 Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NL-453BZ](https://noralighting.com/product/nl-453bz/) - 4" Round Adjustable Bronze Reflector with Bronze Metal Ring. Rated up to 50W and compatible with LED lamps. Compatible Low Voltage Housings: NLIC-401: IC Air-Tight New Construction (Rated up to 50W) NL-401: IC New Construction (Rated up to 50W) NLR-404: Non-IC Remodel (Rated up to 50W) NL-402S: Shallow Non-IC New Construction (Rated up to 50W) NLR-403S: Shallow Non-IC Remodel (Rated up to 50W) Compatible Line Voltage Housings: NSEIC-407AT/20: IC Air-Tight New Construction (Rated up to 20W) NSERIC-407AT/20: IC Air-Tight Remodel (Rated up to 20W) NFBIC-401AT/25A: Fire Rated IC Air-Tight New Construction (Rated up to 25W) NSLIC-401AT/10: IC Air-Tight New Construction (Rated up to 50W) NSL-401AT/10: Non-IC Air-Tight New Construction (Rated up to 50W) NSLR-404AT/10: Non-IC Air-Tight Remodel (Rated up to 50W) Lamp: 12V MR16 or 120V MR16 GU10 Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NL-414HZ](https://noralighting.com/product/nl-414hz/) - 4" Haze Adjustable Reflector with White Metal Ring rated up to 50W max. Compatible Low Voltage Housings: NLIC-401: IC Air-Tight New Construction (Rated up to 50W) NL-401: IC New Construction (Rated up to 50W) NLR-404: Non-IC Remodel (Rated up to 50W) NL-402S: Shallow Non-IC New Construction (Rated up to 50W) NLR-403S: Shallow Non-IC Remodel (Rated up to 50W) Compatible Line Voltage Housings: NSEIC-407AT/20: IC Air-Tight New Construction (Rated up to 20W) NSERIC-407AT/20: IC Air-Tight Remodel (Rated up to 20W) NFBIC-401AT/25A: Fire Rated IC Air-Tight New Construction (Rated up to 25W) NSLIC-401AT/10: IC Air-Tight New Construction (Rated up to 50W) NSL-401AT/10: Non-IC Air-Tight New Construction (Rated up to 50W) NSLR-404AT/10: Non-IC Air-Tight Remodel (Rated up to 50W) Lamp: 12V MR16 or 120V MR16 GU10 Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NL-410](https://noralighting.com/product/nl-410/) - 4" Adjustable Stepped Baffle for Low Voltage and Line Voltage Recessed Housings. Rated up to 50W and compatible with LED lamps. Compatible Low Voltage Housings: NLIC-401: IC Air-Tight New Construction (Rated up to 50W) NL-401: IC New Construction (Rated up to 50W) NLR-404: Non-IC Remodel (Rated up to 50W) NL-402S: Shallow Non-IC New Construction (Rated up to 50W) NLR-403S: Shallow Non-IC Remodel (Rated up to 50W) Compatible Line Voltage Housings: NSEIC-407AT/20: IC Air-Tight New Construction (Rated up to 20W) NSERIC-407AT/20: IC Air-Tight Remodel (Rated up to 20W) NFBIC-401AT/25A: Fire Rated IC Air-Tight New Construction (Rated up to 25W) NSLIC-401AT/10: IC Air-Tight New Construction (Rated up to 50W) NSL-401AT/10: Non-IC Air-Tight New Construction (Rated up to 50W) NSLR-404AT/10: Non-IC Air-Tight Remodel (Rated up to 50W) Lamp: 12V MR16 or 120V MR16 GU10 Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NL-423](https://noralighting.com/product/nl-423/) - 4" Round Shower Trim with Fresnel Lens. Rated up to 50W and compatible with LED lamps. Compatible Low Voltage Housings: NLIC-401: IC Air-Tight New Construction (Rated up to 50W) NL-401: IC New Construction (Rated up to 50W) NLR-404: Non-IC Remodel (Rated up to 50W) NL-402S: Shallow Non-IC New Construction (Rated up to 50W) NLR-403S: Shallow Non-IC Remodel (Rated up to 50W) Compatible Line Voltage Housings: NSEIC-407AT/20: IC Air-Tight New Construction (Rated up to 20W) NSERIC-407AT/20: IC Air-Tight Remodel (Rated up to 20W) NFBIC-401AT/25A: Fire Rated IC Air-Tight New Construction (Rated up to 25W) NSLIC-401AT/10: IC Air-Tight New Construction (Rated up to 50W) NSL-401AT/10: Non-IC Air-Tight New Construction (Rated up to 50W) NSLR-404AT/10: Non-IC Air-Tight Remodel (Rated up to 50W) Lamp: 12V MR16 or 120V MR16 GU10 Mounting: Trim Clips Listing: cULus Listed for Wet Location when used with Compatible Housing - [NS-18](https://noralighting.com/product/ns-18/) - Metal trim with adjustable eyeball can be rotated 358° horizontally and 15° vertically. Eyeball allows lamp to be mounted inside and adjust with trim. Compatible Housings: NFBIC-4INCATA: 2-Hour Fire Rated New Construction (Rated up to 35W) NS-401QAT: Non-IC Air-Tight New Construction (Rated up to 50W) NSIC-401QAT: IC Air-Tight New Construction (Rated up to 50W) NSR-404QAT: Non-IC Air-Tight New Construction (Rated up to 50W) NSRIC-404QAT: IC Air-Tight New Construction (Rated up to 50W) Lamp: 50W R20/PAR20 Maximum Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NPTCB-E14](https://noralighting.com/product/nptcb-e14/) - ** While Supplies Last: Replacement Item ** Energy-efficient and economical Center Basket LED Troffer produces an incredible amount of smooth and uniform general lighting. Fixtures are 120V/277V with 0–10V dimming, are available in a range of Kelvin temperatures and are DLC listed. The fixtures include a diffused, removable lens, a hinged access plate with LED board and built-in earthquake clips. The shallow housing design and easy access wiring plate make the Center Basket Troffer a quick installation. Ideal for use in task areas where general illumination is desired such as offices, schools, conference rooms, libraries, retail, hospitals and others. Features Architectural style and quality Complete room illumination Soft, uniform reflectance Fits most grid ceilings Removable diffused lens evenly distributes light and maximizes performance Two replaceable LED Strips with tightly spaced diodes eliminate the diode image Enclosed driver compartment easily accessible from below via a hinged LED platform Built-in earthquake clips cULus Damp Location Listed DLC listed Input Voltage: 120-277VAC Lumens / Wattage: 3400lm / 33W Color Temperature: 3000K, 3500K, 4000K or 5000K Dimming: 0-10V Finish: White Emergency: Optional integrated emergency battery with remote test switch - [NPTCB-E24](https://noralighting.com/product/nptcb-e24/) - ** While Supplies Last: Replacement Item: NPTCBSW-24 ** Energy-efficient and economical Center Basket LED Troffer produces an incredible amount of smooth and uniform general lighting. Fixtures are 120V/277V with 0–10V dimming, are available in a range of Kelvin temperatures and are DLC listed. The fixtures include a diffused, removable lens, a hinged access plate with LED board and built-in earthquake clips. The shallow housing design and easy access wiring plate make the Center Basket Troffer a quick installation. Ideal for use in task areas where general illumination is desired such as offices, schools, conference rooms, libraries, retail, hospitals and others. Features Architectural style and quality Complete room illumination Soft, uniform reflectance Fits most grid ceilings Removable diffused lens evenly distributes light and maximizes performance Two replaceable LED Strips with tightly spaced diodes eliminate the diode image Enclosed driver compartment easily accessible from below via a hinged LED platform Built-in earthquake clips cULus Damp Location Listed DLC listed Input Voltage: 120-277VAC Lumens / Wattage: 4000lm / 37W or 6100lm / 44W Color Temperature: 3000K, 3500K, 4000K or 5000K Dimming: 0-10V Finish: White Emergency: Optional integrated emergency battery with remote test switch - [NELO-6R](https://noralighting.com/product/nelo-6r/) - 6" Decorative metal ring changes the appearance of the LED luminaire. Finishes: Black, Brushed Nickel, Warm White (to match NSEM-6 enclosures) Compatible Fixtures: NELO-6RTW: 6" ELO with Selectable CCT - [NSEM-6WD](https://noralighting.com/product/nsem-6wd/) - A surface mount enclosure with an emergency LED driver for use with 6" ELO and ELO+ luminaires. It adds 1-1/2" height to the luminaire and matches the finish. Driver’s circuitry automatically switches the luminaire between emergency and normal power operation during power loss and restoration. Operates at a reduced level for a minimum of 90 minutes to allow safe egress during power outage. Upon restoration to normal AC operation, the emergency driver returns to charging mode. FEATURES Compatible with 6" ELO & ELO+ Matching decorative enclosure also available Listed for field installation - UL 924 and CSA C2.22 No 141 Includes integral test switch ELECTRICAL Input Voltage: 120VAC, 50/60Hz Output Voltage: 123/131VDC Wattage: 3W Illumination Time: 90 minutes OPERATION When AC power fails, the driver immediately switches to the emergency mode, operating the LEDs at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the emergency driver automatically returns to the charging mode. BATTERY Ternary lithium-ion battery requires 24 hours to recharge. COMPATIBLE LUMINAIRES NELO-6RTWMPW: 6" ELO with Selectable CCT, 1050lm / 15W, 90+ CRI (use NELO-6RW to match finish) NELOCAC-6RP: 6" ELO+ with Dedicated CCT, 700lm / 12W, 90+ CRI MATCHING DECORATIVE ENCLOSURE NSEM-6ND: Decorative Enclosure without Emergency Driver - [NSEM-6ND](https://noralighting.com/product/nsem-6nd/) - Decorative surface mount enclosure used to match the same appearance as an enclosure with an emergency driver. FEATURES Compatible with 6" ELO & ELO+ Matches the same appearance as enclosure with emergency driver COMPATIBLE LUMINAIRES NELO-6RTWMPW: 6" ELO with Selectable CCT, 1050lm / 15W, 90+ CRI (use NELO-6RW to match finish) NELOCAC-6RP: 6" ELO+ with Dedicated CCT, 700lm / 12W, 90+ CRI MATCHING ENCLOSURE WITH BATTERY NSEM-6WD: Enclosure with Emergency Driver - [NELO-6RTW](https://noralighting.com/product/nelo-6rtw/) - 6" ELO LED luminaires are thin 3/4" surface mounted and available in 4", 6", 8" or 12" sizes. Luminaires mount easily over standard or fire-rated junction boxes. Features Five color temperatures in each fixture (2700K / 3000K / 3500K / 4000K / 5000K) Available in four sizes (4", 6", 8" or 12") Decorative ring accessories are available cETLus Listed for Wet Locations 5-year limited warranty Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Input Voltage: 120VAC Lumens / Wattage: 1050lm / 15W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Color Rendering Index: 90+ CRI Dimming: Triac or ELV Finish: White Accessories: NELO-6RB: 6″ Decorative Ring, Black finish NELO-6RBN: 6″ Decorative Ring, Brushed Nickel finish NELO-6RW: 6″ Decorative Ring, Warm White Finish (to match NSEM-6 enclosures) NSEM-6WD: Enclosure with Emergency Driver NSEM-6ND: Decorative Enclosure without Emergency Driver - [NUTP9-LED/12](https://noralighting.com/product/nutp9-led-12/) - 24V Side-Lit LED Tape has the same performance features as the standard tape light, but instead of projecting the light straight, the light is projected to the side, parallel to the mounting surface of the tape. For example, when mounted under a cabinet in a horizontal position, the light projects sideways toward the back splash with minimal reflection on the counter top. Features ·Lengths include 16' roll, 12" section, or 4" section ·Amber tape finish ·70+ Lumens per foot ·24V DC System ·2700K ·Separable every 12", easily disconnected and connected without soldering ·Field cuttable every 4" or 6 LEDs ·Easy to install; pre applied 3M™ tape or additional mounting accessories available - [NPDBL-E24](https://noralighting.com/product/npdbl-e24/) - *** While Supplies Last *** LED Backlit can be utilized in offices, conference rooms, libraries and other tasks areas where general illumination is desired. White opalescent diffused lens optimizes output while reducing LED diode image. FEATURES • Fits most grid ceilings • Surface, Pendant and Hard ceiling recessed kits available • Dimmable with compatible 0-10V dimmer • DLC Listed Input Voltage: 120-347VAC Lumens / Wattage: 5700lm / 45W Color Temperature: Selectable CCT (3000K / 3500K / 4000K) or Dedicated CCT (5000K) Finish: White Options: Integral Emergency or Motion Sensor Accessories: NPDBL-JB4X4 = 4' Junction box for daisy chaining NPDBL-24DFK = Surface Mount Frame NPDBL-24DDFK = Surface Mount Frame for Emergency or Motion Sensor NPDBL-24RFK = Recessed Mounting Kit NPDBL-PKW = Pendant Mounting Kit - [NPDBL-E22](https://noralighting.com/product/npdbl-e22/) - *** While Supplies Last *** LED Backlit can be utilized in offices, conference rooms, libraries and other tasks areas where general illumination is desired. White opalescent diffused lens optimizes output while reducing LED diode image. FEATURES • Fits most grid ceilings • Surface, Pendant and Hard ceiling recessed kits available • Dimmable with compatible 0-10V dimmer • DLC Listed Input Voltage: 120-347VAC Lumens / Wattage: 3500lm / 30W Color Temperature: Selectable CCT (3000K / 3500K / 4000K) or Dedicated CCT (3000K, 4000K, 5000K) Finish: White Options: Integral Emergency or Motion Sensor Accessories: NPDBL-JB4X4 = 4' Junction box for daisy chaining NPDBL-22DFK = Surface Mount Frame NPDBL-22DDFK = Surface Mount Frame for Emergency or Motion Sensor NPDBL-22RFK = Recessed Mounting Kit NPDBL-PKW = Pendant Mounting Kit - [NPDBL-E14](https://noralighting.com/product/npdbl-e14/) - *** While Supplies Last *** LED Backlit can be utilized in offices, conference rooms, libraries and other tasks areas where general illumination is desired. White opalescent diffused lens optimizes output while reducing LED diode image. Panels are sold and packaged in quantities of two. FEATURES • Field Selectable CCT (3000K, 3500K, 4000K) • Fits most grid ceilings • Surface, Pendant and Hard ceiling recessed kits available • Integral Motion Sensor • DLC Listed Input Voltage: 120-347VAC Lumens / Wattage: 3500lm / 30W Color Temperature: Field Selectable (3000K / 3500K / 4000K) Finish: White Motion Sensor: The microwave motion sensor can detect motion under the luminaire. Accessories: NPDBL-JB4X4 = 4' Junction box for daisy chaining NPDBL-14DDFK = Surface Mount Frame NPDBL-14RFK = Recessed Mounting Kit NPDBL-PKW = Pendant Mounting Kit - [NTH-930](https://noralighting.com/product/nth-930/) - *** While Supplies Last *** Constructed of die cast and extruded aluminum the Architectural Cylinder is minimal in design. A die cast baffle ring shields aperture brightness. The fixture is excellent for LED PAR lamps. Features • Die cast aluminum provies superior strength and rigidity • Baffle eliminates glare and adds finished touch Lamp: 75W BR30/PAR30 max. (not included) Finish: Black Accessory: NT-380: Round Monopoint Canopy - [NTH-920](https://noralighting.com/product/nth-920/) - *** While Supplies Last *** Constructed of die cast and extruded aluminum the Architectural Cylinder is minimal in design. A die cast baffle ring shields aperture brightness. The fixture is excellent for LED PAR lamps. Features Die cast aluminum provies superior strength and rigidity Baffle eliminates glare and adds finished touch Lamp: 50W R20/PAR20 max. (not included) Finish: Black Accessory: NT-380: Round Monopoint Canopy - [NTZ](https://noralighting.com/product/ntz/) - Zoomable Track Head offers aesthetics, flexibility, and performance. Delivering up to 1550lm and featuring a field-adjustable beam angle from 20° to 50°, it provides precise light control for any setting. Each luminaire is available in five selectable CCTs, which allows easy color temperature adjustment from 2700K to 5000K, making it ideal for diverse applications. Perfect for retail, galleries, and commercial spaces, this innovative fixture seamlessly adapts to both accent and general lighting needs. Features Five color temperatures in each fixture (2700K / 3000K / 3500K / 4000K / 5000K) Adjustable beam spreads with front bezel Delivering up to 1550 lumens / 20W @ 90 CRI One or two circuit track capable Available in three track styles (H, J, or L) Adjustability: 360° horizontal and 90° vertical rotation Lumens / Wattage: Up to 1550lm / 20W Color Rendering Index: 90+ CRI Beam Spread: Field Adjustable (20° Narrow Spot to 50° Narrow Flood) Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Dimming: Triac or ELV Accessories: NT-322/12: 12" Track Head Extension Rod NT-322: 18" Track Head Extension Rod NT-330: 18" Flexible Track Head Extension Rod NT-323: 24" Track Head Extension Rod NT-324: 36" Track Head Extension Rod NT-325: 48" Track Head Extension Rod NT-333: Sloped Adapter NT-374: 4" Track Monopoint Retrofit Kit NT-366: Round Monopoint Canopy NT-319: Square Monopoint Canopy  - [NSEIC-407AT/20](https://noralighting.com/product/nseic-407at-20/) - Line Voltage MR16 GU10 (LED Compatible) housing provides the crisp reflectance of MR16 light sources while operating on straight line voltage without transformers. GU10 lamps are shielded and feature solid, heavy duty turn-and-lock contacts. Nora’s GU10 fixture is quick to install, operates on standard incandescent dimming controls, and accepts a wide variety of high quality, adjustable finishing trims. Air-tight construction reduces energy costs by reducing the amount of air escaping through the ceiling. Rated for direct contact with insulation (except spay foam insulation) and combustive materials. Minimum Clearances: “IC” Housings are direct contact rated; no minimum clearance is required Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be re-positioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Socket: GU10 Twist and Lock Maximum Wattage: 20W - [NLR-304AT](https://noralighting.com/product/nlr-304/) - 3" Low voltage remodel housing for installation into existing sheet rock ceilings where access is only available from below the ceiling. For use in non-insulated ceilings, where insulation can be kept 3" from fixtures. Input Voltage: 120V Output Voltage: 12V Transformer: Electronic Wattage: 50W max. (can be labeled at lower wattage, consult factory) Lamp / Socket: MR16 / GU5.3 Minimum Clearances: Non-IC housings require a minimum clearance of 3” from thermal insulation and 1/2" from adjacent building components. - [NATLCB-708/BC](https://noralighting.com/product/natlcb-708-bc/) - A power cord connects the tape light to a compatible 24VDC LED driver with a DC connector. Length: 6" Compatible Tape Light: NUTP14: 24V COB High Output LED Tape Light (450lm/ft.) NUTP15: 24V COB Standard Output LED Tape Light (200lm/ft.) - [NATLCB-L](https://noralighting.com/product/natlcb-l/) - L Connector connects two COB LED tape lights together at a 90° angle. Easily insert the tape light section into the connector without any tools needed. Compatible Tape Light: NUTP14: 24V COB High Output LED Tape Light (450lm/ft.) NUTP15: 24V COB Standard Output LED Tape Light (200lm/ft.) - [NLSTRA-MSCONT2](https://noralighting.com/product/nlstra-mscont2/) - Remote Control for LED Strip Light with Motion Sensor. Allows customer to control sensitivity, length of time fixture is on, etc. Compatible Fixture: NLSTR-4L1334W/MS: 48" Strip Light with Motion Sensor NLSTR-4L1334W/EMMS: 48" Strip Light with Motion Sensor & Emergency NLSTR-8L1334W/MS: 92.75" Strip Light with Motion Sensor NLSTR-8L1334W/EMMS: 92.75" Strip Light with Motion Sensor & Emergency - [NELO-8RTW](https://noralighting.com/product/nelo-8rtw/) - 8" ELO LED luminaires are thin 3/4" surface mounted and available in 4", 6", 8" or 12" sizes. Luminaires mount easily over standard or fire-rated junction boxes. Features Five color temperatures in each fixture (2700K / 3000K / 3500K / 4000K / 5000K) Available in four sizes (4", 6", 8" or 12") Decorative ring accessories are available cETLus Listed for Wet Locations 5-year limited warranty Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Input Voltage: 120VAC Lumens / Wattage: 1400lm / 18W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Color Rendering Index: 90+ CRI Dimming: Triac or ELV Finish: White Accessories: NELO-8R: 8″ Decorative Ring in Black or Brushed Nickel finish - [NELO-4RTW](https://noralighting.com/product/nelo-4rtw/) - 4" ELO LED luminaires are thin 3/4" surface mounted and available in 4", 6", 8" or 12" sizes. Luminaires mount easily over standard or fire-rated junction boxes. Features Five color temperatures in each fixture (2700K / 3000K / 3500K / 4000K / 5000K) Available in four sizes (4", 6", 8" or 12") Decorative ring accessories are available cETLus Listed for Wet Locations 5-year limited warranty Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Input Voltage: 120VAC Lumens / Wattage: 850lm / 12W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Color Rendering Index: 90+ CRI Dimming: Triac or ELV Finish: White Accessories: NELO-4R: 4″ Decorative Ring in Black or Brushed Nickel finish - [NELO-12RTW](https://noralighting.com/product/nelo-12rtw/) - 12" ELO LED luminaires are thin 3/4" surface mounted and available in 4", 6", 8" or 12" sizes. Luminaires mount easily over standard or fire-rated junction boxes. Features Five color temperatures in each fixture (2700K / 3000K / 3500K / 4000K / 5000K) Available in four sizes (4", 6", 8" or 12") Decorative ring accessories are available cETLus Listed for Wet Locations 5-year limited warranty Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Input Voltage: 120VAC Lumens / Wattage: 1750lm / 24W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Color Rendering Index: 90+ CRI Dimming: Triac or ELV Finish: White Accessories: NELO-12R: 12″ Decorative Ring in Black or Brushed Nickel finish - [NLINSW-PCC](https://noralighting.com/product/nlinsw-pcc/) - Pendant and power mounting kit for L-Line Direct luminaires with Integral Emergency. Includes an extra wire for the emergency battery and feeds 120-277V voltage to the system. Also used to suspend luminaires from the ceiling. Includes: Power feed canopy kit, aircraft canopy kit and mounting hardware Input Voltage: 120-277V Cable Length: 8' or 20' (field adjustable) Finish: Black or White Compatible Luminaires: NLINSW-4: 4' L-Line Direct with Integral Emergency NLINSW-8: 8' L-Line Direct with Integral Emergency - [NLINSW-2334](https://noralighting.com/product/nlinsw-2334/) - L-Line Linear series offers a clean and modern appearance with a sleek extruded aluminum housing. Symmetrical light distribution will evenly illuminate surfaces with a diffused lens, making the L-Line ideal for commercial, retail, healthcare and education applications. Available in surface or pendant mounting options. Series can be connected with seamless luminous L,X or T connectors. FEATURES Internal quick connects for easy connection to additional luminaires Selectable Lumens (1200lm / 1800lm / 2400lm) Selectable CCT (3000K / 3500K / 4000K) Can be surface mounted or pendant mounted Also available in wall mount or recessed 0-10V dimming 120-277V input Input Voltage: 120-277V Dimming: 0-10V Length: 2' (actual length 24") Selectable Lumens: 1200lm / 10W; 1800lm / 15W; 2400lm / 21W Color Temperature: Selectable CCT (3000K / 3500K / 4000K) Color Rendering Index: 80+ CRI Finish: Black or White Luminous Connectors: NLINSW-X334: "X" Shaped L-Line LED Direct NLINSW-L334: "L" Shaped L-Line LED Direct NLINSW-T334: "T" Shaped L-Line LED Direct Mounting Kits: NLIN-PCC: Pendant & Power Mounting Kit NLIN-CC: Pendant Mounting Kit NLIN-JBC: Surface Mount Kit Accessories: NLINSW-LENS/41: 41-ft. Continuous Lens (field cuttable) NLINSW-LENS/81: 81-ft. Continuous Lens (field cuttable) NEPK-20LEDUNV: 20W Emergency Battery with Remote Test Switch - [NLINSW-4334](https://noralighting.com/product/nlinsw-4334/) - L-Line Linear series offers a clean and modern appearance with a sleek extruded aluminum housing. Symmetrical light distribution will evenly illuminate surfaces with a diffused lens, making the L-Line ideal for commercial, retail, healthcare and education applications. Available in surface or pendant mounting options. Series can be connected with seamless luminous L,X or T connectors. FEATURES Internal quick connects for easy connection to additional luminaires Selectable Lumens (2425lm / 3600lm / 4850lm) Selectable CCT (3000K / 3500K / 4000K) Can be surface mounted or pendant mounted Also available in wall mount or recessed 0-10V dimming 120-277V input Input Voltage: 120-277V Dimming: 0-10V Length: 4' (actual length 48") Selectable Lumens: 2425lm / 20W; 3600lm / 30W; 4850lm / 42W Color Temperature: Selectable CCT (3000K / 3500K / 4000K) Color Rendering Index: 80+ CRI Finish: Black or White Luminous Connectors: NLINSW-X334: "X" Shaped L-Line LED Direct NLINSW-L334: "L" Shaped L-Line LED Direct NLINSW-T334: "T" Shaped L-Line LED Direct Mounting Kits: NLIN-PCC: Pendant & Power Mounting Kit NLIN-CC: Pendant Mounting Kit NLIN-JBC: Surface Mount Kit Accessories: NLINSW-LENS/41: 41-ft. Continuous Lens (field cuttable) NLINSW-LENS/81: 81-ft. Continuous Lens (field cuttable) NEPK-20LEDUNV: 20W Emergency Battery with Remote Test Switch - [NLINSW-8334](https://noralighting.com/product/nlinsw-8334/) - L-Line Linear series offers a clean and modern appearance with a sleek extruded aluminum housing. Symmetrical light distribution will evenly illuminate surfaces with a diffused lens, making the L-Line ideal for commercial, retail, healthcare and education applications. Available in surface or pendant mounting options. Series can be connected with seamless luminous L,X or T connectors. FEATURES Internal quick connects for easy connection to additional luminaires Selectable Lumens (4875lm / 7300lm / 9750lm) Selectable CCT (3000K / 3500K / 4000K) Can be surface mounted or pendant mounted Also available in wall mount or recessed 0-10V dimming 120-277V input Input Voltage: 120-277V Dimming: 0-10V Length: 8' (actual length 92.375") Selectable Lumens: 4875lm / 40W; 7300lm / 60W; 9750lm / 82W Color Temperature: Selectable CCT (3000K / 3500K / 4000K) Color Rendering Index: 80+ CRI Finish: Black or White Luminous Connectors: NLINSW-X334: "X" Shaped L-Line LED Direct NLINSW-L334: "L" Shaped L-Line LED Direct NLINSW-T334: "T" Shaped L-Line LED Direct Mounting Kits: NLIN-PCC: Pendant & Power Mounting Kit NLIN-CC: Pendant Mounting Kit NLIN-JBC: Surface Mount Kit Accessories: NLINSW-LENS/41: 41-ft. Continuous Lens (field cuttable) NLINSW-LENS/81: 81-ft. Continuous Lens (field cuttable) NEPK-20LEDUNV: 20W Emergency Battery with Remote Test Switch - [NLIN-2](https://noralighting.com/product/nlin-2/) - L-Line Linear series offers a clean and modern appearance with a sleek extruded aluminum housing. Symmetrical light distribution will evenly illuminate surfaces with a diffused lens, making the L-Line ideal for commercial, retail, healthcare and education applications. Available in surface or pendant mounting options. Series can be connected with seamless luminous L,X or T connectors. FEATURES Internal quick connects for easy connection to additional luminaires Dedicated CCT (3000K, 3500K or 4000K) Can be surface mounted or pendant mounted Also available in wall mount or recessed 0-10V dimming 120-277V input Input Voltage: 120-277V Dimming: 0-10V Length: 2' (actual length 24") Lumens / Wattage: 2100lm / 23W Color Temperature: 3000K, 3500K or 4000K Color Rendering Index: 80+ CRI Finish: Aluminum or Black Luminous Connectors: NLIN-X: "X" Shaped L-Line LED Direct NLIN-L: "L" Shaped L-Line LED Direct NLIN-T: "T" Shaped L-Line LED Direct Mounting Kits: NLIN-PCC: Pendant & Power Mounting Kit NLIN-CC: Pendant Mounting Kit NLIN-JBC: Surface Mount Kit Accessories: NLINSW-LENS/41: 41-ft. Continuous Lens (field cuttable) NLINSW-LENS/81: 81-ft. Continuous Lens (field cuttable) NEPK-20LEDUNV: 20W Emergency Battery with Remote Test Switch - [NLIN-4](https://noralighting.com/product/nlin-4/) - L-Line Linear series offers a clean and modern appearance with a sleek extruded aluminum housing. Symmetrical light distribution will evenly illuminate surfaces with a diffused lens, making the L-Line ideal for commercial, retail, healthcare and education applications. Available in surface or pendant mounting options. Series can be connected with seamless luminous L,X or T connectors. FEATURES Internal quick connects for easy connection to additional luminaires Dedicated CCT (3000K, 3500K or 4000K) Can be surface mounted or pendant mounted Also available in wall mount or recessed 0-10V dimming 120-277V input Input Voltage: 120-277V Dimming: 0-10V Length: 4' (actual length 48") Lumens / Wattage: 4200lm / 41W Color Temperature: 3000K, 3500K or 4000K Color Rendering Index: 80+ CRI Finish: Aluminum or Black Luminous Connectors: NLIN-X: "X" Shaped L-Line LED Direct NLIN-L: "L" Shaped L-Line LED Direct NLIN-T: "T" Shaped L-Line LED Direct Mounting Kits: NLIN-PCC: Pendant & Power Mounting Kit NLIN-CC: Pendant Mounting Kit NLIN-JBC: Surface Mount Kit Accessories: NLINSW-LENS/41: 41-ft. Continuous Lens (field cuttable) NLINSW-LENS/81: 81-ft. Continuous Lens (field cuttable) NEPK-20LEDUNV: 20W Emergency Battery with Remote Test Switch - [NLIN-8](https://noralighting.com/product/nlin-8/) - L-Line Linear series offers a clean and modern appearance with a sleek extruded aluminum housing. Symmetrical light distribution will evenly illuminate surfaces with a diffused lens, making the L-Line ideal for commercial, retail, healthcare and education applications. Available in surface or pendant mounting options. Series can be connected with seamless luminous L,X or T connectors. FEATURES Internal quick connects for easy connection to additional luminaires Dedicated CCT (3000K, 3500K or 4000K) Can be surface mounted or pendant mounted Also available in wall mount or recessed 0-10V dimming 120-277V input Input Voltage: 120-277V Dimming: 0-10V Length: 8' (actual length 92.375") Lumens / Wattage: 8400lm / 82W Color Temperature: 3000K, 3500K or 4000K Color Rendering Index: 80+ CRI Finish: Aluminum or Black Luminous Connectors: NLIN-X: "X" Shaped L-Line LED Direct NLIN-L: "L" Shaped L-Line LED Direct NLIN-T: "T" Shaped L-Line LED Direct Mounting Kits: NLIN-PCC: Pendant & Power Mounting Kit NLIN-CC: Pendant Mounting Kit NLIN-JBC: Surface Mount Kit Accessories: NLINSW-LENS/41: 41-ft. Continuous Lens (field cuttable) NLINSW-LENS/81: 81-ft. Continuous Lens (field cuttable) NEPK-20LEDUNV: 20W Emergency Battery with Remote Test Switch - [NLINSW-T334](https://noralighting.com/product/nlinsw-t334/) - "T" Shaped L-Line series offers a clean and modern appearance with a sleek extruded aluminum housing. Symmetrical light distribution will evenly illuminate surfaces with a diffused lens, making the L-Line ideal for commercial, retail, healthcare and education applications. Available in surface or pendant mounting options. Series can be connected with seamless luminous linear, X or T connectors. Input Voltage: 120-277V Dimming: 0-10V Selectable Lumens: 2600lm / 23W; 3900lm / 34W; 5200lm / 43W Color Temperature: Selectable CCT (3000K / 3500K / 4000K) Color Rendering Index: 80+ CRI Finish: Black or White L-Line LED Linear Luminaires: NLINSW-2334: 2' L-Line LED Direct Linear NLINSW-4334: 4' L-Line LED Direct Linear NLINSW-8334: 8' L-Line LED Direct Linear Mounting Kits: NLIN-PCC: Pendant & Power Mounting Kit NLIN-CC: Pendant Mounting Kit NLIN-JBC: Surface Mount Kit Accessories: NLINSW-LENS/41: 41-ft. Continuous Lens (field cuttable) NLINSW-LENS/81: 81-ft. Continuous Lens (field cuttable) NEPK-20LEDUNV: 20W Emergency Battery with Remote Test Switch - [NLINSW-L334](https://noralighting.com/product/nlinsw-l334/) - "L" Shaped L-Line series offers a clean and modern appearance with a sleek extruded aluminum housing. Symmetrical light distribution will evenly illuminate surfaces with a diffused lens, making the L-Line ideal for commercial, retail, healthcare and education applications. Available in surface or pendant mounting options. Series can be connected with seamless luminous linear, X or T connectors. Input Voltage: 120-277V Dimming: 0-10V Selectable Lumens: 1725lm / 15W; 2550lm / 23W; 3450lm / 30W Color Temperature: Selectable CCT (3000K / 3500K / 4000K) Color Rendering Index: 80+ CRI Finish: Black or White L-Line LED Linear Luminaires: NLINSW-2334: 2' L-Line LED Direct Linear NLINSW-4334: 4' L-Line LED Direct Linear NLINSW-8334: 8' L-Line LED Direct Linear Mounting Kits: NLIN-PCC: Pendant & Power Mounting Kit NLIN-CC: Pendant Mounting Kit NLIN-JBC: Surface Mount Kit Accessories: NLINSW-LENS/41: 41-ft. Continuous Lens (field cuttable) NLINSW-LENS/81: 81-ft. Continuous Lens (field cuttable) NEPK-20LEDUNV: 20W Emergency Battery with Remote Test Switch - [NLINSW-X334](https://noralighting.com/product/nlinsw-x334/) - "X" Shaped L-Line series offers a clean and modern appearance with a sleek extruded aluminum housing. Symmetrical light distribution will evenly illuminate surfaces with a diffused lens, making the L-Line ideal for commercial, retail, healthcare and education applications. Available in surface or pendant mounting options. Series can be connected with seamless luminous linear, X or T connectors. Input Voltage: 120-277V Dimming: 0-10V Selectable Lumens: 3500lm / 30W; 5250lm / 44W; 7000lm / 57W Color Temperature: Selectable CCT (3000K / 3500K / 4000K) Color Rendering Index: 80+ CRI Finish: Black or White L-Line LED Linear Luminaires: NLINSW-2334: 2' L-Line LED Direct Linear NLINSW-4334: 4' L-Line LED Direct Linear NLINSW-8334: 8' L-Line LED Direct Linear Mounting Kits: NLIN-PCC: Pendant & Power Mounting Kit NLIN-CC: Pendant Mounting Kit NLIN-JBC: Surface Mount Kit Accessories: NLINSW-LENS/41: 41-ft. Continuous Lens (field cuttable) NLINSW-LENS/81: 81-ft. Continuous Lens (field cuttable) NEPK-20LEDUNV: 20W Emergency Battery with Remote Test Switch - [NLIN-JBC](https://noralighting.com/product/nlin-jbc/) - Surface Mounting Kit for L-Line LED Linear Series (NLIN & NLINSW) Input Voltage: 120-277V Finish: Aluminum End Caps, Black End Caps or White End Caps. Black junction box cover ordered separately (NLIN-JBC-PLATE) Included: Junction box plate, end caps, power cord and mounting hardware Dimensions: 4.5″ x 4.5″ Compatible Luminaires: NLIN-2: 2' L-Line Direct with Dedicated CCT NLINSW-2: 2' L-Line Direct with Selectable CCT NLIN-4: 4' L-Line Direct with Dedicated CCT NLINSW-4: 4' L-Line Direct with Selectable CCT NLIN-8: 8' L-Line Direct with Dedicated CCT NLINSW-8: 8' L-Line Direct with Selectable CCT NLINSW-X: “X” Shaped L-Line Direct with Selectable CCT NLINSW-L: “L” Shaped L-Line Direct with Selectable CCT NLINSW-T: “T” Shaped L-Line Direct with Selectable CCT - [NLIN-CC](https://noralighting.com/product/nlin-cc/) - Pendant mounting kit for L-Line Direct luminaires. Used to suspend luminaires from ceiling. Includes: Aircraft canopy kit and mounting hardware Cable Length: 8' or 20' (field adjustable) Finish: Aluminum, Black or White Compatible Luminaires: NLIN-2: 2' L-Line Direct with Dedicated CCT NLINSW-2: 2' L-Line Direct with Selectable CCT NLIN-4: 4' L-Line Direct with Dedicated CCT NLINSW-4: 4' L-Line Direct with Selectable CCT NLIN-8: 8' L-Line Direct with Dedicated CCT NLINSW-8: 8' L-Line Direct with Selectable CCT NLIN-X: "X" Shaped L-Line Direct with Dedicated CCT NLINSW-X: “X” Shaped L-Line Direct with Selectable CCT NLIN-L: "L" Shaped L-Line Direct with Dedicated CCT NLINSW-L: “L” Shaped L-Line Direct with Selectable CCT NLIN-T: "T" Shaped L-Line Direct with Dedicated CCT NLINSW-T: “T” Shaped L-Line Direct with Selectable CCT - [NLIN-PCC](https://noralighting.com/product/nlin-pcc/) - Pendant and power mounting kit for L-Line Direct luminaires feeds 120-277V voltage to system. Used to suspend luminaires from ceiling. Includes: Power feed canopy kit, aircraft canopy kit and mounting hardware Input Voltage: 120-277V Cable Length: 8' or 20' (field adjustable) Finish: Aluminum, Black or White Compatible Luminaires: NLIN-2: 2' L-Line Direct with Dedicated CCT NLINSW-2: 2' L-Line Direct with Selectable CCT NLIN-4: 4' L-Line Direct with Dedicated CCT NLINSW-4: 4' L-Line Direct with Selectable CCT NLIN-8: 8' L-Line Direct with Dedicated CCT NLINSW-8: 8' L-Line Direct with Selectable CCT NLINSW-X: “X” Shaped L-Line Direct with Selectable CCT NLINSW-L: “L” Shaped L-Line Direct with Selectable CCT NLINSW-T: “T” Shaped L-Line Direct with Selectable CCT - [NSIC-4LMRAT](https://noralighting.com/product/nsic-4lmrat/) - 4" Max. Adjustability LED Dedicated IC Airtight housings are designed for use with Pearl LED retrofit luminares. Housing does not include a “can” inside, allowing for adjustable reflectors to adjust up to 35°. Airtight construction reduces energy costs by reducing the amount of air escaping through the ceiling. “IC” Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam Compatible Luminaires: NPR-4RC: 4" Pearl LED Round Adjustable Cone NPR-4RG: 4" Pearl LED Round Adjustable Gimbal NPR-4RPH: 4" Pearl LED Round Fixed Pinhole (Wet Location) NPR-4RPHA: 4" Pearl LED Round Adjustable Pinhole NPR-4RNB: 4" Pearl LED Round Bullnose (Wet Location) NPR-4RNDC: 4" Pearl LED Round Reflector with Round Aperture (Wet Location) NPR-4RTLA: 4" Pearl LED Trimless Round Adjustable NPR-4RTLNDC: 4" Pearl LED Trimless Round Downlight (Wet Location) NPR-4RTSLA: 4" Pearl LED Trimless Round Adjustable Slot NPR-4RSL: 4" Pearl LED Round Adjustable Slot Aperture NPR-4RSLA: 4" Pearl LED Round Adjustable Slot NPR-4SC: 4" Pearl LED Square Adjustable Cone NPR-4SG: 4" Pearl LED Square Adjustable Gimbal NPR-4SNB: 4" Pearl LED Square Bullnose (Wet Location) NPR-4SNDC: 4" Pearl LED Square Reflector with Round Aperture (Wet Location) NPR-4SNDSQ: 4" Pearl LED Square Reflector with Square Aperture (Wet Location) Accessories: NSIC-4EXTC2: Extension Collar for Ceilings up to 1.75" thick - [NQZ2-4R-F](https://noralighting.com/product/nqz2-4r-f/) - A new construction frame-in with a junction box and collar to assist in installing 4" can-less downlights. Compatible Luminaire: NQZ2-41TWTW-MPW: 4" Quartz Round Can-less LED Downlight - [NLOPAC-R6TWRECKIT](https://noralighting.com/product/nlopac-r6twreckit/) - This is a torsion spring kit for mounting disk lights to 5" or 6" recessed housings. It allows surface-mount luminaires to be retrofitted into existing installations. Compatible Luminaires: NLOPAC-R6REGT24TW: 6" Regressed AC Opal with Selectable CCT NLOPAC-R6TW: 6" AC Opal with Selectable CCT NLOPAC-R7MSTW: 7" AC Opal with Motion Sensor and Selectable CCT - [NQZ-6R-F](https://noralighting.com/product/nqz-6r-f/) - A new construction frame-in with a collar to assist in installing 6" can-less downlights. Compatible Luminaires: NCSC-R6W2TWMPW: 6" Contractor Series Can-less Wafer Downlight NEFLINTW-R6MPW: 6" FLIN Wafer LED Downlight Selectable CCT NFLAT-R6TW: 6" FLAT Wafer LED Downlight Selectable CCT NFLINA-R6TW: 6" FLIN Adjustable LED Downlight Selectable CCT NLTH-61TW: 6" Theia LED Downlight with Selectable CCT NQZ2-61TWTW-MPW: 6" Quartz LED Downlight with Selectable Lumens & CCT - [NQZ2-6S-F](https://noralighting.com/product/nqz2-6s-f/) - A new construction frame-in with a junction box and collar to assist in installing 6" can-less downlights. Compatible Luminaires: NQZ2-66TWTW-MPW: 6" Quartz Square LED Downlight with Selectable Lumens & CCT - [NQZ2-8S-F](https://noralighting.com/product/nqz2-8s-f/) - A new construction frame-in with a junction box and collar to assist in installing 8" can-less downlights. Compatible Luminaire: NQZ2-86TWTW-MPW: 8" Quartz Square Can-less LED Downlight - [NQZ2-86TWTW](https://noralighting.com/product/nqz2-86twtw/) - 8" Quartz luminaires are architectural and commercial-grade LED high-lumen downlights. Each luminaire includes two tunable switches: Selectable Lumens allows the end user to determine the wattage input, and Selectable CCT allows changing the color temperature appearance. Downlights include two tension steel spring clips, which allow the luminaires to be installed without any frame-in or housing for easy installation. FEATURES Can-less installation (No frame-in or housing required) Easy installation for retrofit, remodel, or new construction applications Selectable Lumen switch allows for selectable lumen outputs from 2000lm to 3300lm Selectable CCT switch allows for selectable kelvin temperatures from 3000K / 3500K / 4000K Field changeable reflector allows for easy customization Optional emergency backup 5-year limited warranty ENERGY STAR certified Certified to the high efficacy requirements of California Title 24 JA8-2025 cETLus Listed for Wet Locations Input Voltage: 120-277VAC Rating: IC Lumens / Wattage: Selectable Lumens (2000lm / 18W; 2450lm / 22W; 2900lm / 26W; 3300lm / 30W) Color Temperature: Selectable CCT (3000K / 3500K / 4000K) Dimming: 0-10V Finish: White Listing: cETLus Listed for Wet Locations Warranty: Five Years Accessories: NQZ-8S-F: New Construction Frame-In with Collar NQZ2-8S-F: New Construction Frame-In with Junction Box and Collar NEPK-20LEDUNV: 20W Remote Emergency Driver - [NQZ2-66TWTW](https://noralighting.com/product/nqz2-66twtw/) - 6" Quartz luminaires are architectural and commercial-grade LED high-lumen downlights. Each luminaire includes two tunable switches: Selectable Lumens allows the end user to determine the wattage input, and Selectable CCT allows changing the color temperature appearance. Downlights include two tension steel spring clips, which allow the luminaires to be installed without any frame-in or housing for easy installation. FEATURES Can-less installation (No frame-in or housing required) Easy installation for retrofit, remodel, or new construction applications Selectable Lumen switch allows for selectable lumen outputs from 1300lm to 2150lm Selectable CCT switch allows for selectable kelvin temperatures from 3000K / 3500K / 4000K Field changeable reflector allows for easy customization Optional emergency backup 5-year limited warranty ENERGY STAR certified Certified to the high efficacy requirements of California Title 24 JA8-2025 cETLus Listed for Wet Locations Input Voltage: 120-277VAC Rating: IC Lumens / Wattage: Selectable Lumens (1300lm / 12W; 1750lm / 16W; 2150lm / 20W) Color Temperature: Selectable CCT (3000K / 3500K / 4000K) Dimming: 0-10V Finish: White Listing: cETLus Listed for Wet Locations Warranty: Five Years Accessories: NQZ-6S-F: New Construction Frame-In with Collar NQZ2-6S-F: New Construction Frame-In with Junction Box and Collar NEPK-20LEDUNV: 20W Remote Emergency Driver - [NQZ2-8R-F](https://noralighting.com/product/nqz2-8r-f/) - A new construction frame-in with a junction box and collar to assist in installing 8" can-less downlights. Compatible Luminaire: NQZ2-81TWTW-MPW: 8" Quartz Round Can-less LED Downlight - [NQZ2-81TWTW](https://noralighting.com/product/nqz2-81twtw/) - 8" Quartz luminaires are architectural and commercial-grade LED high-lumen downlights. Each luminaire includes two tunable switches: Selectable Lumens allows the end user to determine the wattage input, and Selectable CCT allows changing the color temperature appearance. Downlights include two tension steel spring clips, which allow the luminaires to be installed without any frame-in or housing for easy installation. FEATURES Can-less installation (No frame-in or housing required) Easy installation for retrofit, remodel, or new construction applications Selectable Lumen switch allows for selectable lumen outputs from 1650lm to 2700lm Selectable CCT switch allows for selectable kelvin temperatures from 3000K / 3500K / 4000K Field changeable reflector allows for easy customization Optional emergency backup 5-year limited warranty ENERGY STAR certified Certified to the high efficacy requirements of California Title 24 JA8-2025 cETLus Listed for Wet Locations Input Voltage: 120-277VAC Rating: IC Lumens / Wattage: Selectable Lumens (1650lm / 15W; 2200lm / 20W; 2700lm / 25W) Color Temperature: Selectable CCT (3000K / 3500K / 4000K) Dimming: 0-10V Finish: White Listing: cETLus Listed for Wet Locations Warranty: Five Years Accessories: NQZ-8OR-MPW: Oversize Ring for holes up to 10" NQZ-8R-F: New Construction Frame-In with Collar NQZ2-8R-F: New Construction Frame-In with Junction Box and Collar NQZ-81REFL: Reflector Insert (Specular Clear, Diffused or Haze) NEPK-20LEDUNV: 20W Remote Emergency Driver - [NQZ2-61TWTW](https://noralighting.com/product/nqz2-61twtw/) - 6" Quartz luminaires are architectural and commercial-grade LED high-lumen downlights. Each luminaire includes two tunable switches: Selectable Lumens allows the end user to determine the wattage input, and Selectable CCT allows changing the color temperature appearance. Downlights include two tension steel spring clips, which allow the luminaires to be installed without any frame-in or housing for easy installation. FEATURES Can-less installation (No frame-in or housing required) Easy installation for retrofit, remodel, or new construction applications Selectable Lumen switch allows for selectable lumen outputs from 1350lm to 2200lm Selectable CCT switch allows for selectable kelvin temperatures from 3000K / 3500K / 4000K Field changeable reflector allows for easy customization Optional emergency backup 5-year limited warranty ENERGY STAR certified Certified to the high efficacy requirements of California Title 24 JA8-2025 cETLus Listed for Wet Locations Input Voltage: 120-277VAC Rating: IC Lumens / Wattage: Selectable Lumens (1350lm / 12W; 1850lm / 16W; 2200lm / 20W) Color Temperature: Selectable CCT (3000K / 3500K / 4000K) Dimming: 0-10V Finish: White Listing: cETLus Listed for Wet Locations Warranty: Five Years Accessories: NQZ-6R-F: New Construction Frame-In with Collar NQZ2-6R-F: New Construction Frame-In with Junction Box and Collar NQZ-61REFL: Reflector Insert (Specular Clear, Diffused or Haze) NEPK-20LEDUNV: 20W Remote Emergency Driver - [NCSP-22](https://noralighting.com/product/ncsp-22/) - Contractor Series: 2'x2' LED Backlit can be utilized in offices, conference rooms, libraries, and other task areas where general illumination is desired. The white diffused lens optimizes output while diffusing LED diode image. Each luminaire includes two tunable switches; Selectable Lumens allow the end user to determine the wattage input & Selectable CCT changes the color temperature appearance. Luminaires are sold in bulk packs (Pack of 4). Input Voltage: 120-277VAC Lumens: Selectable Lumens (2600lm / 3100lm / 3700lm) Wattage: Selectable Wattage (20W / 25W / 35W) Color Temperature: Selectable CCT (3000K / 3500K / 4000K) Dimming: 0-10V Finish: White Listings: cETLus Listed for Damp Locations DLC Listed (V6.0) Warranty: Five Years Accessories: NPDBL-JB4X4 = 4' Junction box for daisy chaining NPDBL-22DFK/W = Surface Mount Kit NPDBL-22RFK/W = Recessed Mounting Kit - [NCSP-24](https://noralighting.com/product/ncsp-24/) - Contractor Series: 2'x4' LED Backlit can be utilized in offices, conference rooms, libraries, and other task areas where general illumination is desired. The white diffused lens optimizes output while diffusing LED diode image. Each luminaire includes two tunable switches; Selectable Lumens allow the end user to determine the wattage input & Selectable CCT changes the color temperature appearance. Luminaires are sold in bulk packs (Pack of 4). Input Voltage: 120-277VAC Lumens: Selectable Lumens (4700lm / 5200lm / 5700lm) Wattage: Selectable Wattage (35W / 40W / 45W) Color Temperature: Selectable CCT (3000K / 3500K / 4000K) Dimming: 0-10V Finish: White Listings: cETLus Listed for Damp Locations DLC Listed (V6.0) Warranty: Five Years Accessories: NPDBL-JB4X4 = 4' Junction box for daisy chaining NPDBL-24DFK/W = Surface Mount Kit NPDBL-24RFK/W = Recessed Mounting Kit - [NLSTR-4L1334W](https://noralighting.com/product/nlstr-4l1334w/) - 48" Industrial LED Strip Light includes an integral CCT switch to change the color temperature at any time! Ideal for commercial, residential, industrial and retail applications. The polycarbonate lens is designed to evenly spread the light in a complete 120° beam pattern. The smooth lens makes for easy maintenance and no diode image. NLSTR can be used in storage or utility buildings, coves, display cases, workshops and garages for task and general lighting. Input Voltage: 120-277V Lumens / Wattage: 3300lm / 24W Color Temperature: Selectable CCT (3000K / 3500K / 4000K) Finish: White Dimming: 0-10V Mounting Accessories: Junction Box Cover Plate or Pendant Kit (ordered separately) Emergency: Optional integral emergency battery with test button switch Motion Sensor: Optional internal microwave sensor can detect motion up to 37 feet away and 60° under the luminaire. Remote control can be used to change motion sensor settings (ordered separately). Remote Control for Motion Sensor: NLSTRA-MSCONT2: Changes motion sensor settings (sensitivity, length of time fixture is on, etc.) for EMMS fixture Listing: cETLus Listed for Damp Locations DLC Listed (V6.0) - [NLSTR-8L1334W](https://noralighting.com/product/nlstr-8l1334w/) - 92.75" Industrial LED Strip Light includes an integral CCT switch to change the color temperature at any time! Ideal for commercial, residential, industrial and retail applications. The polycarbonate lens is designed to evenly spread the light in a complete 120° beam pattern. The smooth lens makes for easy maintenance and no diode image. NLSTR can be used in storage or utility buildings, coves, display cases, workshops and garages for task and general lighting. Input Voltage: 120-277V Lumens / Wattage: 8000lm / 65W Color Temperature: Selectable CCT (3000K / 3500K / 4000K) Finish: White Dimming: 0-10V Mounting Accessories: Junction Box Cover Plate or Pendant Kit (ordered separately) Emergency: Optional integral emergency battery with test button switch Motion Sensor: Optional internal microwave sensor can detect motion up to 37 feet away and 60° under the luminaire. Remote control can be used to change motion sensor settings (ordered separately). Remote Control for Motion Sensor: NLSTRA-MSCONT2: Changes motion sensor settings (sensitivity, length of time fixture is on, etc.) Listing: cETLus Listed for Damp Locations DLC Listed (V6.0) - [NIO-4PRTLA](https://noralighting.com/product/nio-4prtla/) - 4" PLUS Trimless Iolite downlights have no exposed flange and do not extend beyond the ceiling plane. Iolite PLUS Trimless requires a PLUS Trimless Mud Ring and New Construction housing. Deep regressed cone reflector optimizes visual cut-off and adjust up to 35°. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 1850lm / 20W (NHIOICD-415, NHIOICDCP-415) 2200lm / 24W (NHIOICD-420, NHIOICDCP-420) Optics Included: Spot, Narrow Flood, Flood (field changeable) Required: Trimless Mud Plate (NIO-TLMR-4PR) or Flange Accessory (NIO-4PRTFA) - [NIO-4PRTLNDC](https://noralighting.com/product/nio-4prtlndc/) - 4" PLUS Trimless Iolite reflectors have no exposed trim flange and do not extend beyond the ceiling plane. Iolite PLUS Trimless requires a PLUS Trimless Mud Ring and New Construction housing. Deep regressed cone reflectors optimize visual cut-off. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 2050lm / 20W (NHIOICD-415, NHIOICDCP-415) 2450lm / 24W (NHIOICD-420, NHIOICDCP-420) 2800lm / 28W (NHIOICD-425, NHIOICDCP-425) Optics Included: Spot, Narrow Flood, Flood (field changeable) Required: Trimless Mud Plate (NIO-TLMR-4PR) or Flange Accessory (NIO-4PRTFA) - [NIO-4PSTLNDC](https://noralighting.com/product/nio-4pstlndc/) - 4" PLUS Trimless Iolite reflectors have no exposed trim flange and do not extend beyond the ceiling plane. Iolite PLUS Trimless requires a PLUS Trimless Mud Ring and New Construction housing. Deep regressed cone reflectors optimize visual cut-off. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 2100lm / 20W (NHIOICD-4PS15, NHIOICDCP-4PS15) 2500lm / 24W (NHIOICD-4PS20, NHIOICDCP-4PS20) 2850lm / 28W (NHIOICD-4PS25, NHIOICDCP-4PS25) Optics Included: Spot, Narrow Flood, Flood (field changeable) Required: Trimless Mud Plate (NIO-TLMR-4PS) - [NIO-4PSTLA](https://noralighting.com/product/nio-4pstla/) - 4" PLUS Trimless Iolite downlights have no exposed trim flange and do not extend beyond the ceiling plane. Iolite PLUS Trimless requires a PLUS Trimless Mud Ring and PLUS New Construction housing. Deep regressed cone reflector optimizes visual cutoff and adjust up to 35°. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 1650lm / 20W (NHIOICD-4PS15, NHIOICDCP-4PS15) 1950lm / 24W (NHIOICD-4PS20, NHIOICDCP-4PS20) Optics Included: Spot, Narrow Flood, Flood (field changeable) Required: Trimless Mud Plate (NIO-TLMR-4PS) - [NHIOICDCP-4PS25](https://noralighting.com/product/nhioicdcp-4ps25/) - New construction housing for use with Square PLUS trimless only. Chicago plenum rated (CCEA) for use in insulated ceilings and can be in direct contact with insulation. Airtight construction the driver. Features: CCEA compliant (City of Chicago Environmental Air) Emergency option Dimmable 5-year limited warranty 24-1/2" hanger bars with alignment feet and nails included cULus listed for damp location (wet location when used with specific trims) Patented, see noralighting.com/patents Dimming: Triac, ELV, 0-10V or Lutron Hi-lume EcoSystem Compatible Iolite Downlights: NIO-4PSTLA: 4" Iolite PLUS Square LED Trimless Adjustable NIO-4PSTLNDC: 4" Iolite PLUS Square LED Trimless Downlight Required Trimless Mud Plate: NIO-TLMR-4PS: Trimless Mud Plate for 4" Iolite Square PLUS Trimless Emergency: Housing can be specified with an integrated battery & remote test switch - [NHIOICDCP-425](https://noralighting.com/product/nhioicdcp-425/) - Dedicated new construction housing for 4" Iolite downlights. Chicago plenum rated (CCEA) for use in insulated ceilings and can be in direct contact with insulation. Airtight construction the driver. Features: CCEA compliant (City of Chicago Environmental Air) Emergency option Dimmable 5-year limited warranty 24-1/2" hanger bars with alignment feet and nails included cULus listed for damp location (wet location when used with specific trims) Patented, see noralighting.com/patents Dimming: Triac, ELV, 0-10V or Lutron Hi-lume EcoSystem Compatible Iolite Downlights: NIO-4 Compatible Accessories: NIO-4EXTC2: Extension collar for ceilings up to 2" thick NIO-4WCC2: Wood ceiling collar for ceilings up to 2" thick NIO-TLMR-4RA: Trimless mud plate for 4" round trimless downlights NIO-TLMR-4S: Trimless mud plate for 4" square trimless downlights NIO-FMMR-4R: Flush mount mud plate for 4" round flanged downlights NIO-FMMR-4S: Flush mount mud plate for 4" square flanged downlights Emergency: Housing can be specified with an integrated battery & remote test switch - [NHIOICD-4PS25](https://noralighting.com/product/nhioicd-4ps25/) - New construction housing for use with Square PLUS trimless only. Rated for insulated ceilings and can be in direct contact with insulation. Airtight construction provides energy savings by reducing the flow of air through the ceiling. Patented design allows for easy, tool-less removal of the driver. Features: IC Airtight rated Emergency options Dimmable 5-year limited warranty 24-1/2" hanger bars with alignment feet and nails included cULus listed for damp location (wet location when used with specific trims) Patented, see noralighting.com/patents Dimming: Triac, ELV, 0-10V, DALI or Lutron Hi-lume EcoSystem Compatible Iolite Downlights: NIO-4PSTLNDC: 4" Iolite PLUS Square LED Trimless Downlight Required Trimless Mud Plate: NIO-TLMR-4PS: Trimless Mud Plate for 4" Iolite Square PLUS Trimless Emergency: Housing can be specified with an integrated battery or pre-wired for use with remote battery (NEPK-07LEDUNV) - [NHIOICD-425](https://noralighting.com/product/nhioicd-425/) - Dedicated new construction housing for 4" Iolite downlights. Rated for use in insulated ceilings and can be in direct contact with insulation. Airtight construction provides energy savings by reducing the flow of air through the ceiling. Patented design allows easy, tool-less removal of the driver. Features: IC Airtight rated Emergency options Dimmable 5-year limited warranty 24-1/2" hanger bars with alignment feet and nails included cULus listed for damp location (wet location when used with specific trims) Patented, see noralighting.com/patents Dimming: Triac, ELV, 0-10V, DALI or Lutron Hi-lume EcoSystem Compatible Iolite Downlights: NIO-4 Compatible Accessories: NIO-4EXTC2: Extension collar for ceilings up to 2" thick NIO-4WCC2: Wood ceiling collar for ceilings up to 2" thick NIO-TLMR-4RA: Trimless mud plate for 4" round trimless downlights NIO-TLMR-4S: Trimless mud plate for 4" square trimless downlights NIO-FMMR-4R: Flush mount mud plate for 4" round flanged downlights NIO-FMMR-4S: Flush mount mud plate for 4" square flanged downlights Emergency: Housing can be specified with an integrated battery or pre-wired for use with remote battery (NEPK-07LEDUNV) - [NHIOICDCP-4PS20](https://noralighting.com/product/nhioicdcp-4ps20/) - New construction housing for use with Square PLUS trimless only. Chicago plenum rated (CCEA) for use in insulated ceilings and can be in direct contact with insulation. Airtight construction the driver. Features: IC Air-Tight rated Emergency option Dimmable 5-year limited warranty 24-1/2" hanger bars with alignment feet and nails included cULus listed for damp location (wet location when used with specific trims) Patented, see noralighting.com/patents Dimming: Triac, ELV, 0-10V or Lutron Hi-lume EcoSystem Compatible Iolite Downlights: NIO-4PSTLA: 4" Iolite PLUS Square LED Trimless Adjustable NIO-4PSTLNDC: 4" Iolite PLUS Square LED Trimless Downlight Required Trimless Mud Plate: NIO-TLMR-4PS: Trimless Mud Plate for 4" Iolite Square PLUS Trimless Emergency: Housing can be specified with an integrated battery & remote test switch - [NHIOICDCP-420](https://noralighting.com/product/nhioicdcp-420/) - Dedicated new construction housing for 4" Iolite downlights. Chicago plenum rated (CCEA) for use in insulated ceilings and can be in direct contact with insulation. Airtight construction the driver. Features: CCEA compliant (City of Chicago Environmental Air) Emergency option Dimmable 5-year limited warranty 24-1/2" hanger bars with alignment feet and nails included cULus listed for damp location (wet location when used with specific trims) Patented, see noralighting.com/patents Dimming: Triac, ELV, 0-10V or Lutron Hi-lume EcoSystem Compatible Iolite Downlights: NIO-4 Compatible Accessories: NIO-4EXTC2: Extension collar for ceilings up to 2" thick NIO-TLMR-4RA: Trimless mud plate for 4" round trimless downlights NIO-TLMR-4S: Trimless mud plate for 4" square trimless downlights NIO-FMMR-4R: Flush mount mud plate for 4" round flanged downlights NIO-FMMR-4S: Flush mount mud plate for 4" square flanged downlights Emergency: Housing can be specified with an integrated battery & remote test switch - [NHIOICD-4PS20](https://noralighting.com/product/nhioicd-4ps20/) - New construction housing for use with Square PLUS trimless only. Rated for insulated ceilings and can be in direct contact with insulation. Airtight construction provides energy savings by reducing the flow of air through the ceiling. Patented design allows for easy, tool-less removal of the driver. Features: IC Airtight rated Emergency options Dimmable 5-year limited warranty 24-1/2" hanger bars with alignment feet and nails included cULus listed for damp location (wet location when used with specific trims) Patented, see noralighting.com/patents Dimming: Triac, ELV, 0-10V, DALI or Lutron Hi-lume EcoSystem Compatible Iolite Downlights: NIO-4PSTLA: 4" Iolite PLUS Square LED Trimless Adjustable NIO-4PSTLNDC: 4" Iolite PLUS Square LED Trimless Downlight Required Trimless Mud Plate: NIO-TLMR-4PS: Trimless Mud Plate for 4" Iolite Square PLUS Trimless Emergency: Housing can be specified with an integrated battery or pre-wired for use with remote battery (NEPK-07LEDUNV) - [NHIOICD-420](https://noralighting.com/product/nhioicd-420/) - Dedicated new construction housing for 4" Iolite downlights. Rated for use in insulated ceilings and can be in direct contact with insulation. Airtight construction provides energy savings by reducing the flow of air through the ceiling. Patented design allows easy, tool-less removal of the driver. Features: IC Airtight rated Emergency options Dimmable 5-year limited warranty 24-1/2" hanger bars with alignment feet and nails included cULus listed for damp location (wet location when used with specific trims) Patented, see noralighting.com/patents Dimming: Triac, ELV, 0-10V, DALI or Lutron Hi-lume EcoSystem Compatible Iolite Downlights: NIO-4 Compatible Accessories: NIO-4EXTC2: Extension collar for ceilings up to 2" thick NIO-4WCC2: Wood ceiling collar for ceilings up to 2" thick NIO-TLMR-4RA: Trimless mud plate for 4" round trimless downlights NIO-TLMR-4S: Trimless mud plate for 4" square trimless downlights NIO-FMMR-4R: Flush mount mud plate for 4" round flanged downlights NIO-FMMR-4S: Flush mount mud plate for 4" square flanged downlights Emergency: Housing can be specified with an integrated battery or pre-wired for use with remote battery (NEPK-07LEDUNV) - [NHIOICDCP-4PS15](https://noralighting.com/product/nhioicdcp-4ps15/) - New construction housing for use with Square PLUS trimless only. Chicago plenum rated (CCEA) for use in insulated ceilings and can be in direct contact with insulation. Airtight construction the driver. Features: IC Airtight rated Emergency option Dimmable 5-year limited warranty 24-1/2" hanger bars with alignment feet and nails included cULus listed for damp location (wet location when used with specific trims) Patented, see noralighting.com/patents Dimming: Triac, ELV, 0-10V or Lutron Hi-lume EcoSystem Compatible Iolite Downlights: NIO-4PSTLA: 4" Iolite PLUS Square LED Trimless Adjustable NIO-4PSTLNDC: 4" Iolite PLUS Square LED Trimless Downlight Required Trimless Mud Plate: NIO-TLMR-4PS: Trimless Mud Plate for 4" Iolite Square PLUS Trimless Emergency: Housing can be specified with an integrated battery & remote test switch - [NHIOICDCP-415](https://noralighting.com/product/nhioicdcp-415/) - Dedicated new construction housing for 4" Iolite downlights. Chicago plenum rated (CCEA) for use in insulated ceilings and can be in direct contact with insulation. Airtight construction the driver. Features: CCEA compliant (City of Chicago Environmental Air) Emergency option Dimmable 5-year limited warranty 24-1/2" hanger bars with alignment feet and nails included cULus listed for damp location (wet location when used with specific trims) Patented, see noralighting.com/patents Dimming: Triac, ELV, 0-10V or Lutron Hi-lume EcoSystem Compatible Iolite Downlights: NIO-4 Compatible Accessories: NIO-4EXTC2: Extension collar for ceilings up to 2" thick NIO-4WCC2: Wood ceiling collar for ceilings up to 2" thick NIO-TLMR-4RA: Trimless mud plate for 4" round trimless downlights NIO-TLMR-4S: Trimless mud plate for 4" square trimless downlights NIO-FMMR-4R: Flush mount mud plate for 4" round flanged downlights NIO-FMMR-4S: Flush mount mud plate for 4" square flanged downlights Emergency: Housing can be specified with an integrated battery & remote test switch - [NHIOICD-4PS15](https://noralighting.com/product/nhioicd-4ps15/) - New construction housing for use with Square PLUS trimless only. Rated for insulated ceilings and can be in direct contact with insulation. Airtight construction provides energy savings by reducing the flow of air through the ceiling. Patented design allows for easy, tool-less removal of the driver. Features: IC Airtight rated Emergency options Dimmable 5-year limited warranty 24-1/2" hanger bars with alignment feet and nails included cULus listed for damp location (wet location when used with specific trims) Patented, see noralighting.com/patents Dimming: Triac, ELV, 0-10V, DALI or Lutron Hi-lume EcoSystem Compatible Iolite Downlights: NIO-4PSTLA: 4" Iolite PLUS Square LED Trimless Adjustable NIO-4PSTLNDC: 4" Iolite PLUS Square LED Trimless Downlight Required Trimless Mud Plate: NIO-TLMR-4PS: Trimless Mud Plate for 4" Iolite Square PLUS Trimless Emergency: Housing can be specified with an integrated battery or pre-wired for use with remote battery (NEPK-07LEDUNV) - [NHIOICD-225](https://noralighting.com/product/nhioicd-225/) - Dedicated new construction housing for 2" Iolite downlights. Rated for use in insulated ceilings and can be in direct contact with insulation. Airtight construction provides energy savings by reducing the flow of air through the ceiling. Patented design allows easy, tool-less removal of the driver. Features: IC Airtight rated Emergency options Dimmable 5-year limited warranty 24-1/2" hanger bars with alignment feet and nails included cULus listed for damp location (wet location when used with specific trims) Patented, see noralighting.com/patents Dimming: Triac, ELV, 0-10V, DALI or Lutron Hi-lume EcoSystem Compatible Iolite Downlights: NIO-2 and NIOB-2 Compatible Accessories: NIO-2EXTC2: Extension collar for ceilings up to 2" thick NIO-FMMR-2R: Flush mount mud plate for 2" round flanged downlights NIO-FMMR-2S: Flush mount mud plate for 2" square flanged downlights Emergency: Housing can be specified with an integrated battery or pre-wired for use with remote battery (NEPK-07LEDUNV) - [NHIOICDCP-215](https://noralighting.com/product/nhioicdcp-215/) - Dedicated new construction housing for 2" Iolite downlights. Chicago plenum rated (CCEA) for use in insulated ceilings and can be in direct contact with insulation. Airtight construction the driver. Features: CCEA compliant (City of Chicago Environmental Air) Emergency option Dimmable 5-year limited warranty 24-1/2" hanger bars with alignment feet and nails included cULus listed for damp location (wet location when used with specific trims) Patented, see noralighting.com/patents Dimming: Triac, ELV, 0-10V or Lutron Hi-lume EcoSystem Compatible Iolite Downlights: NIO-2 and NIOB-2 Compatible Accessories: NIO-2EXTC2: Extension collar for ceilings up to 2" thick NIO-TLMR-2R: Trimless mud plate for 2" round trimless downlights NIO-FMMR-2R: Flush mount mud plate for 2" round flanged downlights NIO-FMMR-2S: Flush mount mud plate for 2" square flanged downlights Emergency: Housing can be specified with an integrated battery & remote test switch - [NHIOICD-215](https://noralighting.com/product/nhioicd-215/) - Dedicated new construction housing for 2" Iolite downlights. Rated for use in insulated ceilings and can be in direct contact with insulation. Airtight construction provides energy savings by reducing the flow of air through the ceiling. Patented design allows easy, tool-less removal of the driver. Features: IC Airtight rated Emergency options Dimmable 5-year limited warranty 24-1/2" hanger bars with alignment feet and nails included cULus listed for damp location (wet location when used with specific trims) Patented, see noralighting.com/patents Dimming: Triac, ELV, 0-10V, DALI or Lutron Hi-lume EcoSystem Compatible Iolite Downlights: NIO-2 and NIOB-2 Compatible Accessories: NIO-2EXTC2: Extension collar for ceilings up to 2" thick NIO-FMMR-2R: Flush mount mud plate for 2" round flanged downlights NIO-FMMR-2S: Flush mount mud plate for 2" square flanged downlights Emergency: Housing can be specified with an integrated battery or pre-wired for use with remote battery (NEPK-07LEDUNV) - [NHIOFK-1](https://noralighting.com/product/nhiofk-1/) - New construction flat frame converts 1" Iolite remodel housings. Allows access to driver from below the ceiling. Compatible Housings: NHRIOIC-16 - [NHRIOIC-28](https://noralighting.com/product/nhrioic-28/) - Dedicated remodel housing for 2" Iolite downlights or 2" iPOINT monopoints. Rated for use in insulated ceilings and can be in direct contact with insulation. Airtight construction provides energy savings by reducing the flow of air through the ceiling. Features: IC Airtight rated Quick connects provided for easy installation Dimmable 5-year limited warranty cULus listed for damp location (wet location when used with specific reflectors) Input Voltage: 120-277V Dimming: Triac, ELV or 0-10V Compatible Iolite Recessed Trims: NIOB-2 Compatible iPOINT Monopoints: NIOP-2 Mounting: New construction flat frame ordered separately (NHIOFK-2) - [NHIOICDCP-28](https://noralighting.com/product/nhioicdcp-28/) - Dedicated new construction housing for 2" Iolite downlights or 2" iPOINT monopoints. Chicago plenum rated (CCEA) for use in insulated ceilings and can be in direct contact with insulation. Airtight construction the driver. Features: CCEA compliant (City of Chicago Environmental Air) Emergency option Dimmable 5-year limited warranty 24-1/2" hanger bars with alignment feet and nails included cULus listed for damp location (wet location when used with specific trims) Patented, see noralighting.com/patents Dimming: Triac, ELV, 0-10V or Lutron Hi-lume EcoSystem Compatible Iolite Downlights: NIO-2 and NIOB-2 Compatible iPOINT Monopoints: NIOP-2 Compatible Accessories: NIO-2EXTC2: Extension collar for ceilings up to 2" thick NIO-2WCC2: Wood ceiling collar for ceilings up to 2" thick NIO-TLMR-2R: Trimless mud plate for 2" round trimless downlights NIO-FMMR-2R: Flush mount mud plate for 2" round flanged downlights NIO-FMMR-2S: Flush mount mud plate for 2" square flanged downlights Emergency: Housing can be specified with an integrated battery & remote test switch - [NHIOICD-220](https://noralighting.com/product/nhioicd-220/) - Dedicated new construction housing for 2" Iolite downlights. Rated for use in insulated ceilings and can be in direct contact with insulation. Airtight construction provides energy savings by reducing the flow of air through the ceiling. Patented design allows easy, tool-less removal of the driver. Features: IC Airtight rated Emergency options Dimmable 5-year limited warranty 24-1/2" hanger bars with alignment feet and nails included cULus listed for damp location (wet location when used with specific trims) Patented, see noralighting.com/patents Dimming: Triac, ELV, 0-10V, DALI or Lutron Hi-lume EcoSystem Compatible Iolite Downlights: NIO-2 and NIOB-2 Compatible Accessories: NIO-2EXTC2: Extension collar for ceilings up to 2" thick NIO-FMMR-2R: Flush mount mud plate for 2" round flanged downlights NIO-FMMR-2S: Flush mount mud plate for 2" square flanged downlights Emergency: Housing can be specified with an integrated battery or pre-wired for use with remote battery (NEPK-07LEDUNV) - [NHIOICDCP-220](https://noralighting.com/product/nhioicdcp-220/) - Dedicated new construction housing for 2" Iolite downlights. Chicago plenum rated (CCEA) for use in insulated ceilings and can be in direct contact with insulation. Airtight construction the driver. Features: CCEA compliant (City of Chicago Environmental Air) Emergency option Dimmable 5-year limited warranty 24-1/2" hanger bars with alignment feet and nails included cULus listed for damp location (wet location when used with specific trims) Patented, see noralighting.com/patents Dimming: Triac, ELV, 0-10V or Lutron Hi-lume EcoSystem Compatible Iolite Downlights: NIO-2 and NIOB-2 Compatible Accessories: NIO-2EXTC2: Extension collar for ceilings up to 2" thick NIO-TLMR-2R: Trimless mud plate for 2" round trimless downlights NIO-FMMR-2R: Flush mount mud plate for 2" round flanged downlights NIO-FMMR-2S: Flush mount mud plate for 2" square flanged downlights Emergency: Housing can be specified with an integrated battery & remote test switch - [NHIOICDCP-225](https://noralighting.com/product/nhioicdcp-225/) - Dedicated new construction housing for 2" Iolite downlights. Chicago plenum rated (CCEA) for use in insulated ceilings and can be in direct contact with insulation. Airtight construction the driver. Features: CCEA compliant (City of Chicago Environmental Air) Emergency option Dimmable 5-year limited warranty 24-1/2" hanger bars with alignment feet and nails included cULus listed for damp location (wet location when used with specific trims) Patented, see noralighting.com/patents Dimming: Triac, ELV, 0-10V or Lutron Hi-lume EcoSystem Compatible Iolite Downlights: NIO-2 and NIOB-2 Compatible Accessories: NIO-2EXTC2: Extension collar for ceilings up to 2" thick NIO-TLMR-2R: Trimless mud plate for 2" round trimless downlights NIO-FMMR-2R: Flush mount mud plate for 2" round flanged downlights NIO-FMMR-2S: Flush mount mud plate for 2" square flanged downlights Emergency: Housing can be specified with an integrated battery & remote test switch - [NHIOICD-48](https://noralighting.com/product/nhioicd-48/) - Dedicated new construction housing for 4" Iolite downlights. Rated for use in insulated ceilings and can be in direct contact with insulation. Airtight construction provides energy savings by reducing the flow of air through the ceiling. Patented design allows easy, tool-less removal of the driver. Features: IC Airtight rated Emergency options Dimmable 5-year limited warranty 24-1/2" hanger bars with alignment feet and nails included cULus listed for damp location (wet location when used with specific trims) Patented, see noralighting.com/patents Dimming: Triac, ELV, 0-10V, DALI or Lutron Hi-lume EcoSystem Compatible Iolite Downlights: NIO-4 Compatible Accessories: NIO-4EXTC2: Extension collar for ceilings up to 2" thick NIO-4WCC2: Wood ceiling collar for ceilings up to 2" thick NIO-TLMR-4RA: Trimless mud plate for 4" round trimless downlights NIO-TLMR-4SA: Trimless mud plate for 4" square trimless downlights NIO-FMMR-4R: Flush mount mud plate for 4" round flanged downlights NIO-FMMR-4S: Flush mount mud plate for 4" square flanged downlights Emergency: Housing can be specified with an integrated battery or pre-wired for use with remote battery (NEPK-07LEDUNV) - [NHIOICDCP-48](https://noralighting.com/product/nhioicdcp-48/) - Dedicated new construction housing for 4" Iolite downlights. Chicago plenum rated (CCEA) for use in insulated ceilings and can be in direct contact with insulation. Airtight construction the driver. Features: CCEA compliant (City of Chicago Environmental Air) Emergency option Dimmable 5-year limited warranty 24-1/2" hanger bars with alignment feet and nails included cULus listed for damp location (wet location when used with specific trims) Patented, see noralighting.com/patents Dimming: Triac, ELV, 0-10V or Lutron Hi-lume EcoSystem Compatible Iolite Downlights: NIO-4 Compatible Accessories: NIO-4EXTC2: Extension collar for ceilings up to 2" thick NIO-4WCC2: Wood ceiling collar for ceilings up to 2" thick NIO-TLMR-4RA: Trimless mud plate for 4" round trimless downlights NIO-TLMR-4S: Trimless mud plate for 4" square trimless downlights NIO-FMMR-4R: Flush mount mud plate for 4" round flanged downlights NIO-FMMR-4S: Flush mount mud plate for 4" square flanged downlights Emergency: Housing can be specified with an integrated battery & remote test switch - [NHRIOIC-48](https://noralighting.com/product/nhrioic-48/) - Dedicated remodel housing for 4" Iolite downlights. Rated for use in insulated ceilings and can be in direct contact with insulation. Airtight construction provides energy savings by reducing the flow of air through the ceiling. Features: IC Airtight rated Quick connects provided for easy installation Dimmable 5-year limited warranty cULus listed for damp location (wet location when used with specific reflectors) Compatible Iolite Reflectors: NIO-4 - [NHIOICD-415](https://noralighting.com/product/nhioicd-415/) - Dedicated new construction housing for 4" Iolite downlights. Rated for use in insulated ceilings and can be in direct contact with insulation. Airtight construction provides energy savings by reducing the flow of air through the ceiling. Patented design allows easy, tool-less removal of the driver. Features: IC Airtight rated Emergency options Dimmable 5-year limited warranty 24-1/2" hanger bars with alignment feet and nails included cULus listed for damp location (wet location when used with specific trims) Patented, see noralighting.com/patents Dimming: Triac, ELV, 0-10V, DALI or Lutron Hi-lume EcoSystem Compatible Iolite Downlights: NIO-4 Compatible Accessories: NIO-4EXTC2: Extension collar for ceilings up to 2" thick NIO-4WCC2: Wood ceiling collar for ceilings up to 2" thick NIO-TLMR-4RA: Trimless mud plate for 4" round trimless downlights NIO-TLMR-4S: Trimless mud plate for 4" square trimless downlights NIO-FMMR-4R: Flush mount mud plate for 4" round flanged downlights NIO-FMMR-4S: Flush mount mud plate for 4" square flanged downlights Emergency: Housing can be specified with an integrated battery or pre-wired for use with remote battery (NEPK-07LEDUNV) - [NHIOICD-16](https://noralighting.com/product/nhioicd-16/) - Dedicated new construction housing for 1" Iolite downlights or 1" iPOINT monopoints. Rated for use in insulated ceilings and can be in direct contact with insulation. Airtight construction provides energy savings by reducing the flow of air through the ceiling. Features: IC Airtight rated Emergency options Dimmable 5-year limited warranty 24-1/2" hanger bars with alignment feet and nails included cULus listed for damp location (wet location when used with specific trims) Patented, see noralighting.com/patents Compatible Iolite Downlights: NIO-1 and NIOB-1 Compatible iPOINT Monopoints: NIOP-1 Compatible Accessories: NIO-1EXTC2: Extension collar for ceilings up to 2" thick NIO-FMMR-1R: Flush mount mud plate for 1" NIOB-1R round downlights NIO-FMMR-1S: Flush mount mud plate for 1" NIOB-1S square downlights Emergency: Housing can be specified with an integrated battery or pre-wired for use with remote battery (NEPK-07LEDUNV) - [NHIOICDCP-16](https://noralighting.com/product/nhioicdcp-16/) - Dedicated new construction housing for 1" Iolite downlights or 1" iPOINT monopoints. Chicago plenum rated (CCEA) for use in insulated ceilings and can be in direct contact with insulation. Airtight construction the driver. Features: CCEA compliant (City of Chicago Environmental Air) Dimmable 5-year limited warranty 24-1/2" hanger bars with alignment feet and nails included cULus listed for damp location (wet location when used with specific trims) Patented, see noralighting.com/patents Compatible Iolite Downlights: NIO-1 and NIOB-1 Compatible iPOINT Monopoints: NIOP-1 Compatible Accessories: NIO-1EXTC2: Extension collar for ceilings up to 2" thick NIO-FMMR-1R: Flush mount mud plate for 1" NIOB-1R round downlights NIO-FMMR-1S: Flush mount mud plate for 1" NIOB-1S square downlights Emergency: Housing can be specified with an integrated battery & remote test switch - [NHIOICD-28](https://noralighting.com/product/nhioicd-28/) - Dedicated new construction housing for 2" Iolite downlights or 2" iPOINT monopoints. Rated for use in insulated ceilings and can be in direct contact with insulation. Airtight construction provides energy savings by reducing the flow of air through the ceiling. Patented design allows easy, tool-less removal of the driver. Features: IC Airtight rated Quick connects provided for easy installation Emergency options 5-year limited warranty 24-1/2" hanger bars with alignment feet and nails included cULus listed for damp location (wet location when used with specific trims) Patented, see noralighting.com/patents Dimming: Triac, ELV, 0-10V, DALI or Lutron Hi-lume EcoSystem Compatible Iolite Downlights: NIO-2 and NIOB-2 Compatible iPOINT Monopoints: NIOP-2 Compatible Accessories: NIO-2EXTC2: Extension collar for ceilings up to 2" thick NIO-2WCC2: Wood ceiling collar for ceilings up to 2" thick NIO-TLMR-2R: Trimless mud plate for 2" round trimless downlights NIO-FMMR-2R: Flush mount mud plate for 2" round flanged downlights NIO-FMMR-2S: Flush mount mud plate for 2" square flanged downlights Emergency: Housing can be specified with an integrated battery or pre-wired for use with remote battery (NEPK-07LEDUNV) - [NHRIOIC-16](https://noralighting.com/product/nhrioic-16/) - Dedicated remodel housing for 1" Iolite reflectors or 1" iPOINT monopoints. Rated for use in insulated ceilings and can be in direct contact with insulation. Airtight construction provides energy savings by reducing the flow of air through the ceiling. Features: IC Airtight rated Quick connects provided for easy installation Dimmable 5-year limited warranty cULus listed for damp location (wet location when used with specific reflectors) Compatible Iolite Trims: NIOB-1 Compatible iPOINT Monopoints: NIOP-1 Mounting: New construction flat frame ordered separately (NHIOFK-1) - [NEPKA-07LEDFPTS](https://noralighting.com/product/nepka-07ledfpts/) - Replacement face plate and test switch for remote emergency LED drivers Compatible Emergency Driver: NEPK-07LEDUNV: 7W Emergency LED Driver - [NLCBC-453](https://noralighting.com/product/nlcbc-453/) - Cobalt LED Retrofit are cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The units produce 1000 Lumen output and rendering 90+ CRI. Cobalt fixtures integrate the latest from the Cree® COB family of LED arrays, giving bright spectacular light output and low power consumption. An obvious and smart choice for Green Energy efficient lighting in commercial and residential applications. Features 5-year limited warranty Cree® COB LED with integrated driver 1000 lumens 3000K @ 90+ CRI Dimmable Includes medium base socket for easy retrofitting GU24 Socket adapter available for use with GU24 base housings cULus classified for Wet Location Certified to the high efficacy requirements of California Title 24 JA8-2025 Compatible Housings: NFBIC-4LMRATA = Fire Rated LED Housing NFBIC-4INCATA = Fire Rated Line Voltage Housing NHIC-4LMRAT = IC Air-Tight LED Housing NHICCP-4LMRAT = CCEA LED Housing NSIC-401QAT = IC Air-Tight Line Voltage Housing NS-401QAT = Non-IC Air-Tight Line Voltage Housing NHIC-4G24AT = IC Air-Tight GU24 Housing NHRIC-4LMRAT = IC Air-Tight LED Remodel Housing NSRIC-404QAT = IC Air-Tight Line Voltage Housing NSR-404QAT = Non-IC Air-Tight Line Voltage Housing - [NLCBC-451D](https://noralighting.com/product/nlcbc-451d/) - Cobalt LED Retrofit are cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The units produce 1000 Lumen output and rendering 90+ CRI. Cobalt fixtures integrate the latest from the Cree® COB family of LED arrays, giving bright spectacular light output and low power consumption. An obvious and smart choice for Green Energy efficient lighting in commercial and residential applications. Features 5-year limited warranty Cree® COB LED with integrated driver 1000 lumens 3000K @ 90+ CRI Dimmable Includes medium base socket for easy retrofitting GU24 Socket adapter available for use with GU24 base housings cULus classified for Wet Location Certified to the high efficacy requirements of California Title 24 JA8-2025 Compatible Housings: NFBIC-4LMRATA = Fire Rated LED Housing NFBIC-4INCATA = Fire Rated Line Voltage Housing NHIC-4LMRAT = IC Air-Tight LED Housing NHICCP-4LMRAT = CCEA LED Housing NSIC-401QAT = IC Air-Tight Line Voltage Housing NS-401QAT = Non-IC Air-Tight Line Voltage Housing NHIC-4G24AT = IC Air-Tight GU24 Housing NHRIC-4LMRAT = IC Air-Tight LED Remodel Housing NSRIC-404QAT = IC Air-Tight Line Voltage Housing NSR-404QAT = Non-IC Air-Tight Line Voltage Housing - [NLCBC-452D](https://noralighting.com/product/nlcbc-452d/) - Cobalt LED Retrofit are cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The units produce 1000 Lumen output and rendering 90+ CRI. Cobalt fixtures integrate the latest from the Cree® COB family of LED arrays, giving bright spectacular light output and low power consumption. An obvious and smart choice for Green Energy efficient lighting in commercial and residential applications. Features 5-year limited warranty Cree® COB LED with integrated driver 1000 lumens 2700K or 3000K @ 90+ CRI Dimmable Includes medium base socket for easy retrofitting GU24 Socket adapter available for use with GU24 base housings cULus classified for Wet Location Certified to the high efficacy requirements of California Title 24 JA8-2025 Compatible Housings: NFBIC-4LMRATA = Fire Rated LED Housing NFBIC-4INCATA = Fire Rated Line Voltage Housing NHIC-4LMRAT = IC Air-Tight LED Housing NHICCP-4LMRAT = CCEA LED Housing NSIC-401QAT = IC Air-Tight Line Voltage Housing NS-401QAT = Non-IC Air-Tight Line Voltage Housing NHIC-4G24AT = IC Air-Tight GU24 Housing NHRIC-4LMRAT = IC Air-Tight LED Remodel Housing NSRIC-404QAT = IC Air-Tight Line Voltage Housing NSR-404QAT = Non-IC Air-Tight Line Voltage Housing - [NLCBC-470](https://noralighting.com/product/nlcbc-470/) - Cobalt retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The luminaires produce over 800 lumens at 90+ CRI. The Cobalt series intergrates a Cree® COB family of LED arrays, giving bright spectacular light output and low power consumption. The adjustable elbow allows for greater aiming flexibility with 358° horizontal and 75° vertical adjustment. Features Retrofit existing 4" recessed housings Field adjustable beam spreads (narrow flood installed and spot included) 800 lumen output 2700K, 3000K, 3500K or 4000K @ 90+ CRI Cree® COB LED Technology Integral dimmable driver Certified to the high efficacy requirements of California Title 24 JA8-2025 - [NLCBC-4870](https://noralighting.com/product/nlcbc-4870/) - Cobalt retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The luminaires produce over 800 lumens at 90+ CRI. The Cobalt series intergrates a Cree® COB family of LED arrays, giving bright spectacular light output and low power consumption. The adjustable elbow allows for greater aiming flexibility with 358° horizontal and 75° vertical adjustment. Features Retrofit existing 4" recessed housings Field adjustable beam spreads (narrow flood installed and spot included) 800 lumen output 2700K, 3000K, 3500K or 4000K @ 90+ CRI Cree® COB LED Technology Integral dimmable driver Certified to the high efficacy requirements of California Title 24 JA8-2025 - [NLOPAC-R8T24](https://noralighting.com/product/nlopac-r8t24/) - 8" AC Opal LED surface mount is designed to be installed over a standard junction box. The low-profile dimmable luminaire produces even illumination and is cULus listed for wet locations. Features: AC LED (No Driver) Dimmable Mount on standard 4" junction box Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: Up to 2150lm / 30W Color Temperature: 2700K, 3000K, 4000K or 5000K Color Rendering Index: 90+ CRI Finish: Black, Bronze, Natural Metal or White Optional Accessories: NLOPAC-56RECKIT-2 = Retrofit Kit for mounting on 5" or 6" recessed housings - [NFLIN-R815](https://noralighting.com/product/nflin-r815/) - Thin, regressed LED recessed luminaire designed for easy installation in new construction or remodel applications, no housing is required. FLIN includes a quick connect that allows the junction box to easily disconnect and mount in the ceiling. Junction box measures under 2" for shallow plenum ceilings where access above the ceiling is limited. The regressed lens with sharp baffle cuts reduces aperture brightness. Features Regressed lens with baffle Thin construction measures under 2" height IC Air-Tight & wet location listed Quick disconnect allows for easy installation Triac or ELV dimming 5-Year limited warranty Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 1900lm / 20W Color Temperature: 3500K or 5000K Color Rendering Index: 90+ CRI Finish: White Accessories: NFLIN-8R-F: New Construction Frame-In NFLIN-EW-4: 4' Quick Connect Extension Cable NFLIN-EW-20: 20' Quick Connect Extension Cable - [NTE-860](https://noralighting.com/product/nte-860/) - MAY LED Track fixture has an eclectic style to fit any decor. The die-cast aluminum body helps dissipate heat and improve life. Small track head resembles line voltage fixtures without large driver enclosures. FEATURES Over 75% energy savings when compared to incandescent 34º Narrow Flood Comfort Dim warms CCT from 2900K to 1800K as dimmed One or two circuit track capable 5-Year limited warranty Certified to requirements of CA Title 24 JA8-2025 Also available as track pack Lumens / Wattage: Dedicated CCT: Up to 850lm / 10W Comfort Dim: Up to 650lm / 10W Color Temperature: 2700K, 3000K, 3500K, 4000K or Comfort Dim (Warm Dim) Optics: 34° Narrow Flood Finish: Black or White Track Adapter: H-Style, J-Style or L-Style - [NLRS-6S11](https://noralighting.com/product/nlrs-6s11/) - Super sloped LED retrofit downlights adjust up to 45° for ceilings with steep pitches. Luminaires requires no driver and are suitable for use with most 6" super slope housings. Ceiling Pitch: 7/12 to 12/12 Lumens / Wattage: 1200lm / 16W Color Temperatures: 2700K, 3000K or 4000K Color Rendering Index: 90+ CRI Compatible Housings: NHIC-928LMRAT: 6" Super Sloped New Construction Housing - LED Dedicated NHIC-928QAT: 6" Super Sloped New Construction Housing - Medium Base Socket NHRIC-928LMRAT: 6" Super Sloped Remodel Housing - LED Dedicated NHRIC-928QAT: 6" Super Sloped Remodel Housing - Medium Base Socket Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch Listing: - cULus classified for Damp Location when used with compatible housing - 5-Year Limited Warranty - Certified to the high efficacy requirements of California Title 24 JA8-2025 - Meets ASTM-E283 Air-Tight requirements - [NLRS-6S12](https://noralighting.com/product/nlrs-6s12/) - Super sloped LED retrofit downlights adjust up to 45° for ceilings with steep pitches. Luminaires requires no driver and are suitable for use with most 6" super slope housings. Ceiling Pitch: 7/12 to 12/12 Lumens / Wattage: 1200lm / 16W Color Temperatures: 2700K, 3000K or 4000K Color Rendering Index: 90+ CRI Compatible Housings: NHIC-928LMRAT: 6" Super Sloped New Construction Housing - LED Dedicated NHIC-928QAT: 6" Super Sloped New Construction Housing - Medium Base Socket NHRIC-928LMRAT: 6" Super Sloped Remodel Housing - LED Dedicated NHRIC-928QAT: 6" Super Sloped Remodel Housing - Medium Base Socket Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch Listing: - cULus classified for Damp Location when used with compatible housing - 5-Year Limited Warranty - Certified to the high efficacy requirements of California Title 24 JA8-2025 - Meets ASTM-E283 Air-Tight requirements - [NLRS-612](https://noralighting.com/product/nlrs-612/) - 6" Sloped LED retrofit baffle adjust up to 25° for ceilings with steep pitches. Luminaires requires no driver and are suitable for use with most 6" sloped housings Ceiling Pitch: 2/12 to 6/12 Lumens / Wattage: 1200lm / 15W Color Temperatures: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Color Rendering Index: 90+ CRI Compatible Housings: NHIC-926DWQAT: 6" Sloped IC Air-Tight Double Wall New Construction - Medium Base Socket NHIC-926QAT: 6" Sloped IC Air-Tight New Construction - Medium Base Socket NHRIC-926QAT: 6" Sloped IC Air-Tight Remodel - Medium Base Socket NHIC-926LMRAT: 6" Sloped IC Air-Tight New Construction - LED Dedicated NHRIC-926LMRAT: 6" Sloped IC Air-Tight Remodel - LED Dedicated Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch Listing: - cULus classified for Damp Location when used with compatible housing - 5-Year Limited Warranty - Certified to the high efficacy requirements of California Title 24 JA8-2025 - Meets ASTM-E283 Air-Tight requirements - [NLRS-611](https://noralighting.com/product/nlrs-611/) - 6" Sloped LED retrofit reflector adjust up to 25° for ceilings with steep pitches. Luminaires requires no driver and are suitable for use with most 6" sloped housings Ceiling Pitch: 2/12 to 6/12 Lumens / Wattage: 1200lm / 15W Color Temperatures: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Color Rendering Index: 90+ CRI Compatible Housings: NHIC-926DWQAT: 6" Sloped IC Air-Tight Double Wall New Construction - Medium Base Socket NHIC-926QAT: 6" Sloped IC Air-Tight New Construction - Medium Base Socket NHRIC-926QAT: 6" Sloped IC Air-Tight Remodel - Medium Base Socket NHIC-926LMRAT: 6" Sloped IC Air-Tight New Construction - LED Dedicated NHRIC-926LMRAT: 6" Sloped IC Air-Tight Remodel - LED Dedicated Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch Listing: - cULus classified for Damp Location when used with compatible housing - 5-Year Limited Warranty - Certified to the high efficacy requirements of California Title 24 JA8-2025 - Meets ASTM-E283 Air-Tight requirements - [NOXAC-431TW](https://noralighting.com/product/noxac-431tw/) - 4” AC Onyx Retrofit Series requires no driver and allows for a sleek design. Spun aluminum construction provides clean sharp edges and is suitable for use with most 4” recessed housings. Deep-regressed optics and round aperture deliver even and glare-free illumination. Features: AC LED (No Driver) Dimmable Five color temperatures in each fixture Includes medium base socket adapter for easy retrofitting in 4" recessed housings Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 900lm / 11.5W Color Temperature: Selectable CCT (2700K, 3000K, 3500K, 4000K or 5000K) Note: For dedicated color temperature, see NOXAC-431 Finish: Black or White Dimming: Triac or ELV Accessories: NOX-4EYELID: 4" Round Eyelid for Onyx NOX-4OR-W: 4" Round Oversize Ring for Onyx NRA-212SM: GU24 Socket Adapter NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch - [NOXAC-5632TW](https://noralighting.com/product/noxac-5632tw/) - 5"/6" AC Onyx Retrofit Series requires no driver and allows for a sleek design. Baffle trim minimizes glare by absorbing and diffusing excess light, suitable for use with most 5” and 6” recessed housings. Features: AC LED (No Driver) Dimmable Five Selectable CCT(2700K / 3000K / 3500K / 4000K / 5000K) Includes medium base socket adapter for easy retrofitting in 5"/6" recessed housings Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: Up to 1150lm / 16.5W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Note: For dedicated color temperature, see NOXAC-5632 Finish: White Baffle / White Flange Dimming: Triac or ELV Accessories: NRA-212SM: GU24 Socket Adapter NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch - [NOXAC-432TW](https://noralighting.com/product/noxac-432tw/) - 4” AC Onyx Retrofit Series requires no driver and allows for a sleek design. Spun aluminum construction provides clean sharp edges and is suitable for use with most 4” recessed housings. Deep-regressed optics and round aperture deliver even and glare-free illumination. Features: AC LED (No Driver) Dimmable Five color temperatures in each fixture Includes medium base socket adapter for easy retrofitting in 4" recessed housings Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 900lm / 11.5W Color Temperature: Selectable CCT (2700K, 3000K, 3500K, 4000K or 5000K) Note: For dedicated color temperature, see NOXAC-432 Finish: White Dimming: Triac or ELV Accessories: NOX-4EYELID: 4" Round Eyelid for Onyx NOX-4OR-W: 4" Round Oversize Ring for Onyx NRA-212SM: GU24 Socket Adapter NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch - [NM1-RAEYELID](https://noralighting.com/product/nm1-raeyelid/) - Round scoop stainless steel trim for NM1-170. Easy install to threaded LED module, no tools are required. Finish: Black or White Compatible Luminaire: NM1-170: 1" 12V M1 LED Downlight - [NCA-EW-4](https://noralighting.com/product/nca-ew-4/) - Extension cables are used to extend the length between luminaire and driver enclosure. Can be connected together to create custom lengths. Maximum length between luminaire and driver is 40'. Cable Length: 4' Compatible Luminaires: NIOC-1LED: 900lm LED Module for 1" Iolite Can-less NJCB-09: 9W Driver Box for 1" Iolite Can-less NIOC-24LED: 1250lm LED Module for 2" & 4" Iolite Can-less NJCB-12: 12W Driver Box for 2" & 4" Iolite Can-less NMW-2: 2" M-Wave Can-less Downlight NMW-4: 4" M-Wave Can-less Downlight - [NCA-EW-10](https://noralighting.com/product/nca-ew-10/) - Extension cables are used to extend the length between luminaire and driver enclosure. Can be connected together to create custom lengths. Maximum length between luminaire and driver is 40'. Cable Length: 10' Compatible Fixtures: NIOC-1LED: 900lm LED Module for 1" Iolite Can-less NJCB-09: 9W Driver Box for 1" Iolite Can-less NIOC-24LED: 1250lm LED Module for 2" & 4" Iolite Can-less NJCB-12: 12W Driver Box for 2" & 4" Iolite Can-less NMW-2: 2" M-Wave Can-less Downlight NMW-4: 4" M-Wave Can-less Downlight - [NATL-202](https://noralighting.com/product/natl-202/) - The 2" interconnection cable allows for the linking of two Tape Light runs in any direction. Interconnection cables can be joined together for various lengths. Interconnection cables can also be used to extend Power Line Interconnectors. Compatible: Side-Lit Tape Light - [NIOP-2RCY](https://noralighting.com/product/niop-2rcy/) - *** While Supplies Last *** The iPOINT LED monopoint is the newest addition to the Iolite family. iPOINT luminaires require an Iolite housing, allowing the fixture to maintain a minimal canopy and sleek appearance. iPOINT fixtures produce 1000 lumens at 4000K / 90+ CRI. Similar to Iolite reflectors, each iPOINT includes spot, narrow flood and flood optics which can be easily changed in the field. Features Small appearance resembles a monopoint fixture LED COB technology Field changeable optics (three included) 5-Year limited warranty Lumens / Wattage: 1000lm / 14W Color Temperature: 4000K Color Rendering Index: 90+ CRI Finish: Black Compatible Housings: NHIOICD-28 - 2" IC Airtight New Construction NHIOICDCP-28 - 2" Chicago Plenum New Construction NHRIOIC-28 - 2" IC Airtight Remodel - [NATL-545W](https://noralighting.com/product/natl-545w/) - 24V plug-in driver to be used with Nora Lighting’s 24 Volt systems. Direct connection to a wall outlet. Input Voltage: 120VAC Ouput Voltage: 24VDC Wattage: 45W Dimming: Non-Dimmable Cord Length: 6' Accessory: NATL-302W: 5" Power Line Splitter Listing: cULus Listed - [NLIN-JBC-PLATE](https://noralighting.com/product/nlin-jbc-plate/) - Replaces junction box plate included with NLIN Surface Mount Kit Finish: Black Compatible Accessory: NLIN-JBC Dimensions: 4.5" x 4.5" - [NE-902LED](https://noralighting.com/product/ne-902led/) - Slim architectural outdoor LED wall-pack with photo-sensor for dusk to dawn security lighting. The unique luminaire includes general lighting for everyday use and emergency lighting when a power failure occurs. FEATURES Universal 120-277V Input Outdoor luminaire with general and emergency lighting Test switch and LED indicator IP65 rated Self-diagnostic and self-testing unit Available in three finishes with UV coating; white, black or bronze General illumination can be controlled with a photosensor or wall switch CONSTRUCTION Architectural, low profile decorative design with die-cast aluminum housing. Enclosure is IP65 rated and suitable for outdoor applications, and includes a UV Resistant polycarbonate lens. MOUNTING Wall mounted luminaire with 1/2” threaded conduit knockout on top or rear knockout for junction box wiring. LABELS AND LISTINGS 5-year limited warranty cULus Listed for Wet locations IP65 rated - [NE-921LED](https://noralighting.com/product/ne-921led/) - Decorative architectural die-cast outdoor luminaire includes a heater pack for cold weather applications. Luminaire includes a photosensor that will turn the 1250lm general light on after dawn and off in the morning. During a power loss, an internal battery will turn the luminaire on at 400lm for 90 minutes. FEATURES Universal 120-277V Input Outdoor luminaire with general and emergency lighting IP65 rated Self-diagnostic and self-testing unit General illumination can be controlled with a photosensor or wall switch Includes cold weather heater CONSTRUCTION Architectural, low profile decorative design with die-cast aluminum housing. Enclosure is IP65 rated and suitable for outdoor applications, and includes a UV Resistant polycarbonate lens. LABELS AND LISTINGS 5-year limited warranty cULus Listed for Wet locations IP65 rated - [NEG-50](https://noralighting.com/product/neg-50/) - Polycarbonate weather-proof, vandal resistant enclosure with ABS back plate. Heavy duty construction Gasket for Wet Location For use with LED Head Emergency (NE-700LED) Width: 15-3/8" Height: 7-3/4" Depth: 5-3/4" - [NE-700LED](https://noralighting.com/product/ne-700led/) - Mini profile LED emergency light with remote capability and self diagnostics. Luminaire provides 90 minutas of light from two adjustable heads for illuminating paths of egress upon failure of normal power. FEATURES Plastic enclosure with 5VA flame retardant Snap-together design for easy installation Two fully adjustable glare-free square shape heads Test switch and charge rate indicator Maintenance-free, rechargeable Ni-Cad batteries Extra 3.6V battery for 3W remote capabilities Self-diagnostic and self-testing unit Ceiling or wall mounted Universal 120-277V input CONSTRUCTION Injection-molded thermoplastic ABS housing. Plastic enclosure with 5VA flame retardant. Snap-together design for easy installation. Two fully adjustable glare-free square heads for emergency lighting LABELS AND LISTINGS cULus Listed for Damp locations NFPA - [NEG-602](https://noralighting.com/product/neg-602/) - Waterproof and Vandal Resistant Enclosure for Emergency Lights Compatible Products: NE-612LED: LED Compact Dual Head Emergency Light - [NPSU-3X96W/24](https://noralighting.com/product/npsu-3x96w-24/) - 24V Constant Voltage Class 2 Dimmable LED driver can be used with Nora Lighting's 24 Volt systems. Three channels each produce 96 watts and can be dimmed with Triac, ELV, MLV, 0-10V, or PWM dimmers. Enclosure is rated for wet locations and cULus listed. Input Voltage: 110V-277V Output Voltage: 24VDC Wattage: 3 x 96W Class 2 Circuits (288W) Dimming: Triac, ELV, MLV, 0-10V, or PWM Knockouts: Six Knockouts Listings: cULus Listed for Wet Locations Optional Accessories: NALTL-10: 10' Power Line Connector NALTL-30: 30' Power Line Connector - [NPSU-60W/12](https://noralighting.com/product/npsu-60w-12/) - 12V Constant Voltage Class 2 Dimmable LED driver can be used with Nora Lighting's 12 Volt systems. Compatible with Triac, ELV, MLV, 0-10V, or PWM dimmers and a wide range of applications. Enclosure is rated for wet locations and cULus listed. Input Voltage: 110V-277V Output Voltage: 12VDC Wattage: 60W Dimming: Triac, ELV, MLV, 0-10V, or PWM Knockouts: Five Knockouts Listings: cULus Listed for Wet Locations Optional Accessories: NALTL-10: 10' Power Line Connector NALTL-30: 30' Power Line Connector - [NULSA-106](https://noralighting.com/product/nulsa-106/) - 72" 3-Wire Cord used to connect the luminaire to an outlet. Finish: White Compatible Fixtures: NULS: 120V LED Linear - [NULSA-272-HWC](https://noralighting.com/product/nulsa-272-hwc/) - 72" 3-Wire Power cord used to connect luminaire to NULSA-JBOX or junction box. Finish: White Compatible Fixtures: NULS: 120V LED Linear - [NLCBC-469](https://noralighting.com/product/nlcbc-469/) - Cobalt retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. Patented adjustable mechanism rotates and adjusts while never exposing an opening or breaking the ceiling plane. Retrofit luminaires deliver up to 1000 lumens in various color temperature options. Cobalt series integrates the latest COB LED technology, giving bright spectacular light output and low power consumption. Features Retrofit existing 4" recessed housings Field adjustable optics (flood installed, spot and narrow flood included) COB LED Technology Integral dimmable driver Includes medium base socket adapter Certified to the high efficacy requirements of California Title 24 JA8-2025 Patented, see noralighting.com/patents Lumens / Wattage: Up to 1000lm / 12W Color Temperature: 2700K, 3000K, 3500K or 4000K Optics/Lenses: Three field changeable optics and two lenses are included (optional TIR optics are available) NLCBC-469TIR - Premium TIR Optic (25° or 45°) Oversize Ring: Covers cutouts up to 5-3/4" diameter (NLCBC-4OR) Compatible Housings: NFBIC-4LMRATA = Fire Rated LED Housing NFBIC-4INCATA = Fire Rated Line Voltage Housing NHIC-4LMRAT = IC Air-Tight LED Housing NHICCP-4LMRAT = CCEA LED Housing NSIC-401QAT = IC Air-Tight Line Voltage Housing NS-401QAT = Non-IC Air-Tight Line Voltage Housing NHIC-4G24AT = IC Air-Tight GU24 Housing NHRIC-4LMRAT = IC Air-Tight LED Remodel Housing NSRIC-404QAT = IC Air-Tight Line Voltage Housing NSR-404QAT = Non-IC Air-Tight Line Voltage Housing - [NLCBC-569](https://noralighting.com/product/nlcbc-569/) - Cobalt retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. Patented adjustable mechanism rotates and adjusts while never exposing an opening or breaking the ceiling plane. Retrofit luminaires deliver up to 1200 lumens in various color temperature options. Cobalt series integrates the latest COB LED technology, giving bright spectacular light output and low power consumption. Features Retrofit existing 5" recessed housings Field adjustable optics (flood installed, spot and narrow flood included) COB LED Technology Integral dimmable driver Includes medium base socket adapter Certified to the high efficacy requirements of California Title 24 JA8-2025 Patented, see noralighting.com/patents Lumens / Wattage: Up to 1200lm / 14W Color Temperature: 2700K, 3000K, 3500K or 4000K Optics/Lenses: Three field changeable optics and two lenses are included (optional TIR optics are available) NLCBC-569TIR - Premium 15° TIR Optic Oversize Ring: Covers cutouts up to 7" diameter (NLCBC-5OR) Compatible Housings: NFBIC-5LMRATA = Fire Rated LED Housing NFBIC-5INCATA = Fire Rated Line Voltage Housing NHIC-527LMRAT = Shallow IC Air-Tight LED Housing NHIC-5LMRAT = IC Air-Tight LED Housing NHIC-527QAT = Shallow IC Air-Tight Line Voltage Housing NHIC-501QAT = IC Air-Tight Line Voltage Housing NHRIC-527LMRAT = Shallow IC Air-Tight LED Remodel Housing NHRIC-5LMRAT = IC Air-Tight LED Remodel Housing NHRIC-527QAT = Shallow IC Air-Tight Line Voltage Housing NHRIC-504QAT = IC Air-Tight Line Voltage Housing - [NLCBC-669](https://noralighting.com/product/nlcbc-669/) - Cobalt retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. Patented adjustable mechanism rotates and adjusts while never exposing an opening or breaking the ceiling plane. Retrofit luminaires deliver up to 1200 lumens in various color temperature options. Cobalt series integrates the latest COB LED technology, giving bright spectacular light output and low power consumption. Features Retrofit existing 6" recessed housings Field adjustable optics (flood installed, spot and narrow flood included) COB LED Technology Integral dimmable driver Includes medium base socket adapter Certified to the high efficacy requirements of California Title 24 JA8-2025 Patented, see noralighting.com/patents Lumens / Wattage: Up to 1200lm / 14W Color Temperature: 2700K, 3000K, 3500K or 4000K Optics/Lenses: Three field changeable optics and two lenses are included (optional TIR optics are available) NLCBC-669TIR - Premium 15° TIR Optic Oversize Ring: Covers cutouts up to 8" diameter (NLCBC-6OR) Compatible Housings: NFBIC-6LMRATA = Fire Rated LED Housing NFBIC-6INCATA = Fire Rated Line Voltage Housing NHIC-27LMRAT = Shallow IC Air-Tight LED Housing NHIC-6LMRAT = IC Air-Tight LED Housing NHICCP-6LMRAT = CCEA LED Housing NHIC-27QAT = Shallow IC Air-Tight Line Voltage Housing NHIC-17QAT = IC Air-Tight Line Voltage Housing NH-26Q = Non-IC Line Voltage Housing NHIC-6G24ATFL = IC Air-Tight GU24 Housing NHRIC-27LMRAT = Shallow IC Air-Tight LED Remodel Housing NHRIC-6LMRAT = IC Air-Tight LED Remodel Housing NHRIC-27QAT = Shallow IC Air-Tight Line Voltage Housing NHRIC-17QAT = IC Air-Tight Line Voltage Housing NHR-26Q = Non-IC Line Voltage Housing - [NM1-RAIHEC](https://noralighting.com/product/nm1-raihec/) - Round hexcell louver, field changeable trim. Requires NM1-170. Finishes: Black, Brushed Nickel or White - [NIO-FMMR-2S](https://noralighting.com/product/nio-fmmr-2s/) - Allows 2" Iolite square flanged trims to be installed even with the ceiling plane, with a visible flange. Mud ring attaches to drywall and requires professional drywall finishing. Compatible Housings: NHIOICD-28: 2" Iolite New Construction Housing, 800lm-1000lm NHIOICD-215: 2" Iolite New Construction Housing, 1500lm NHIOICD-220: 2" Iolite New Construction Housing, 2000lm NHIOICD-225: 2" Iolite New Construction Housing, 2500lm NHIOICDCP-28: 2" Iolite Chicago Plenum Housing, 800lm-1000lm NHIOICDCP-215: 2" Iolite Chicago Plenum Housing, 1500lm NHIOICDCP-220: 2" Iolite Chicago Plenum Housing, 2000lm NHIOICDCP-225: 2" Iolite Chicago Plenum Housing, 2500lm Compatible Reflectors: NIOB-2SC: 2" Iolite LED Square Adjustable Cone NIOB-2SG: 2" Iolite LED Square Adjustable Gimbal NIOB-2SNDC: 2" Iolite LED Square Reflector with Round Aperture NIOB-2SNDSQ: 2" Iolite LED Square Reflector with Square Aperture NIOB-2SNB: 2" Iolite LED Square Bullnose - [NIO-FMMR-2R](https://noralighting.com/product/nio-fmmr-2r/) - Allows 2" Iolite round flanged trims to be installed even with the ceiling plane, with a visible flange. Mud ring attaches to drywall and requires professional drywall finishing. Compatible Housings: NHIOICD-28: 2" Iolite New Construction Housing, 800lm-1000lm NHIOICD-215: 2" Iolite New Construction Housing, 1500lm NHIOICD-220: 2" Iolite New Construction Housing, 2000lm NHIOICD-225: 2" Iolite New Construction Housing, 2500lm NHIOICDCP-28: 2" Iolite Chicago Plenum Housing, 800lm-1000lm NHIOICDCP-215: 2" Iolite Chicago Plenum Housing, 1500lm NHIOICDCP-220: 2" Iolite Chicago Plenum Housing, 2000lm NHIOICDCP-225: 2" Iolite Chicago Plenum Housing, 2500lm Compatible Reflectors: NIOB-2RC: 2" Iolite LED Round Adjustable Cone NIOB-2RG: 2" Iolite LED Round Adjustable Gimbal NIOB-2RPHA: 2" Iolite LED Round Adjustable Pinhole NIOB-2RSL: 2" Iolite LED Round Adjustable Slot Aperture NIOB-2RNDC: 2" Iolite LED Round Reflector NIOB-2RNB: 2" Iolite LED Round Bullnose NIOB-2RPH: 2" Iolite LED Round Pinhole - [NIO-FMMR-4S](https://noralighting.com/product/nio-fmmr-4s/) - Allows 4" Iolite square flanged trims to be installed even with the ceiling plane, with a visible flange. Mud ring attaches to drywall and requires professional drywall finishing. Compatible Housings: NHIOICD-48: 4" Iolite New Construction Housing, 800lm-1000lm NHIOICD-415: 4" Iolite New Construction Housing, 1500lm NHIOICD-420: 4" Iolite New Construction Housing, 2000lm NHIOICD-425: 4" Iolite New Construction Housing, 2500lm NHIOICDCP-48: 4" Iolite Chicago Plenum Housing, 800lm-1000lm NHIOICDCP-415: 4" Iolite Chicago Plenum Housing, 1500lm NHIOICDCP-420: 4" Iolite Chicago Plenum Housing, 2000lm NHIOICDCP-425: 4" Iolite Chicago Plenum Housing, 2500lm Compatible Reflectors: NIO-4SC: 4" Iolite LED Square Adjustable Cone NIO-4SG: 4" Iolite LED Square Adjustable Gimbal NIO-4SD: 4" Iolite LED Square Adjustable Reflector with Round Aperture NIO-4SDSQ: 4" Iolite LED Square Adjustable Reflector with Square Aperture NIO-4SNDC: 4" Iolite LED Square Reflector with Round Aperture NIO-4SNDSQ: 4" Iolite LED Square Reflector with Square Aperture NIO-4SNB: 4" Iolite LED Square Bullnose NIO-4SW: 4" Iolite LED Square Wall Wash - [NIO-FMMR-4R](https://noralighting.com/product/nio-fmmr-4r/) - Allows 4" Iolite round flanged trims to be installed even with the ceiling plane, with a visible flange. Mud ring attaches to drywall and requires professional drywall finishing. Compatible Housings: NHIOICD-48: 4" Iolite New Construction Housing, 800lm-1000lm NHIOICD-415: 4" Iolite New Construction Housing, 1500lm NHIOICD-420: 4" Iolite New Construction Housing, 2000lm NHIOICD-425: 4" Iolite New Construction Housing, 2500lm NHIOICDCP-48: 4" Iolite Chicago Plenum Housing, 800lm-1000lm NHIOICDCP-415: 4" Iolite Chicago Plenum Housing, 1500lm NHIOICDCP-420: 4" Iolite Chicago Plenum Housing, 2000lm NHIOICDCP-425: 4" Iolite Chicago Plenum Housing, 2500lm Compatible Reflectors: NIO-4RC: 4" Iolite LED Round Adjustable Cone NIO-4RG: 4" Iolite LED Round Adjustable Gimbal NIO-4RPHA: 4" Iolite LED Round Adjustable Pinhole NIO-4RSL: 4" Iolite LED Round Adjustable Slot Aperture NIO-4RD: 4" Iolite LED Round Adjustable Deep Reflector NIO-4RNDC: 4" Iolite LED Round Reflector NIO-4RNB: 4" Iolite LED Round Bullnose NIO-4RPH: 4" Iolite LED Round Pinhole - [NTM-726](https://noralighting.com/product/ntm-726/) - 6" Airtight Baffled Lensless Shower Trim rated up to 150W max. Compatible Housings: NH-26Q: Non-IC New Construction (Rated up to 150W) NHR-26Q: Non-IC Remodel (Rated up to 150W) NHIC-17/100DWQA: IC AT Double Wall New Construction (Rated up to 100W) NHIC-17QAT: IC Airtight New Construction (Rated up to 100W) NHRIC-17QAT: IC Airtight Remodel (Rated up to 100W) NHIC-17QNBAT: IC Airtight New Construction, No Bracket (Rated up to 100W) NHRIC-17QNBAT: IC Airtight Remodel, No Bracket (Rated up to 100W) Mounting: Torsion Springs Listing: cULus Listed for Wet Location when used with Compatible Housing - [NTM-713](https://noralighting.com/product/ntm-713/) - 6" Airtight Deep Baffle with Flange for Line Voltage Recessed Housings. Rated up to 150W and compatible with LED lamps. Compatible Housings: NHIC-17/100DWQA: IC Airtight New Construction (Ratd up to 100W) NHIC-17QAT: IC Airtight New Construction (Rated up to 90W) NHIC-17QNBAT: IC Airtight New Construction w/ Floating Socket/No Bracket (Rated up to 90W) NHRIC-17QAT: IC Airtight Remodel (Rated up to 90W) NHRIC-17QNBAT: IC Airtight Remodel w/ Floating Socket/No Bracket (Rated up to 90W) NH-26Q: Non-IC New Construction (Rated up to 150W) NHR-26Q: Non-IC Remodel (Rated up to 150W) NFBIC-6INCATA: Fire Rated New Construction (Rated up to 90W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTM-57W/M1](https://noralighting.com/product/ntm-57w-m1/) - 6" Regressed PAR38 Reflector for Line Voltage Recessed Housings. Rated up to 100W and compatible with LED lamps. Finish: Specular White Compatible Housings: NHIC-17/100DWQA: IC Air-Tight New Construction (Rated up to 100W) Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NM1-WH6](https://noralighting.com/product/nm1-wh6/) - Wire harness system is used to connect up to (6) NM1-170 to a compatible 12V LED driver on an evenly spaced wire. Each 6" dropped is spaced 32-1/2" on center. Maximum length between luminaire and driver is 80'. Includes power feed for NAPKED or NPSU LED drivers. Spacing between luminaires: 32-1/2". Output Wire Length: 6” each Compatible Luminaires: NM1-170: 12V M1 LED Downlight - [NM1-TM6](https://noralighting.com/product/nm1-tm6/) - Splitter cable is used to connect up to (6) NM1-170 to a compatible 12V LED driver. Maximum length between luminaire and driver is 80’. Includes power feed for NAPKED or NPSU LED drivers. Compatible Luminaires: NM1-170: 12V M1 LED Downlight - [NUDTW-8832/23345](https://noralighting.com/product/nudtw-8832-23345/) - LEDUR LED Under cabinet luminaires include two switches to change the color temperature and lumen output. Five color temperature options and two lumen outputs creates ten different fixtures in one! Color temperature options range from 2700K, 3000K, 3500K, 4000K or 5000K @ 90 CRI. Luminaires produces an 275 lumens or 475 lumens average per foot. LEDUR uniform reflectance is excellent when used under cabinet over granite, polished stone or any reflective surface, additionally it is excellent in retail display lighting where diode image might distract from display merchandise. FEATURES Ten fixtures in one! (5 CCT options and 2 lumen outputs) Five color temperatures in each fixture (2700K, 3000K, 3500K, 4000K or 5000K) Two lumen outputs in each fixture (275lm or 475lm per foot) Edge-lit design eliminates LED diode image Available in five different lengths Built-in on/off rocker switch Linkable up to 400 Watts fixtures 3-wire grounded electrical port on both ends for power or linking Quick connect stab-in connectors included Captive Screws for easy mounting Integral dimmable driver Length: 32″ Input Voltage: 120V Lumens / Wattage: 275lm or 475lm per ft. / 16W Color Temperature: Selectable CCT (27K/30K/35K/40K/50K) Color Rendering Index: 90+ CRI Dimming: Triac or ELV Finish: Bronze Maximum Run Length: 400W max. Accessories: NUA-802: Junction Box NUA-805: 72″ Cord & Plug Power Cord NUA-804: 72″ Hardwire Power Cord NUA-803: End-to-End Connector NUA-806: 6″ Jumper Cable NUA-812: 12″ Jumper Cable NUA-824: 24″ Jumper Cable NUA-872: 72″ Jumper Cable - [NUDTW-8822/23345](https://noralighting.com/product/nudtw-8822-23345/) - LEDUR LED Under cabinet luminaires include two switches to change the color temperature and lumen output. Five color temperature options and two lumen outputs creates ten different fixtures in one! Color temperature options range from 2700K, 3000K, 3500K, 4000K or 5000K @ 90 CRI. Luminaires produces an 275 lumens or 475 lumens average per foot. LEDUR uniform reflectance is excellent when used under cabinet over granite, polished stone or any reflective surface, additionally it is excellent in retail display lighting where diode image might distract from display merchandise. FEATURES Ten fixtures in one! (5 CCT options and 2 lumen outputs) Five color temperatures in each fixture (2700K, 3000K, 3500K, 4000K or 5000K) Two lumen outputs in each fixture (275lm or 475lm per foot) Edge-lit design eliminates LED diode image Available in five different lengths Built-in on/off rocker switch Linkable up to 400 Watts fixtures 3-wire grounded electrical port on both ends for power or linking Quick connect stab-in connectors included Captive Screws for easy mounting Integral dimmable driver Length: 22″ Input Voltage: 120V Lumens / Wattage: 275lm or 475lm per ft. / 11W Color Temperature: Selectable CCT (27K/30K/35K/40K/50K) Color Rendering Index: 90+ CRI Dimming: Triac or ELV Finish: Bronze or White Maximum Run Length: 400W max. Accessories: NUA-802: Junction Box NUA-805: 72″ Cord & Plug Power Cord NUA-804: 72″ Hardwire Power Cord NUA-803: End-to-End Connector NUA-806: 6″ Jumper Cable NUA-812: 12″ Jumper Cable NUA-824: 24″ Jumper Cable NUA-872: 72″ Jumper Cable - [NUDTW-8811/23345](https://noralighting.com/product/nudtw-8811-23345/) - LEDUR LED Under cabinet luminaires include two switches to change the color temperature and lumen output. Five color temperature options and two lumen outputs creates ten different fixtures in one! Color temperature options range from 2700K, 3000K, 3500K, 4000K or 5000K @ 90 CRI. Luminaires produces an 275 lumens or 475 lumens average per foot. LEDUR uniform reflectance is excellent when used under cabinet over granite, polished stone or any reflective surface, additionally it is excellent in retail display lighting where diode image might distract from display merchandise. FEATURES Ten fixtures in one! (5 CCT options and 2 lumen outputs) Five color temperatures in each fixture (2700K, 3000K, 3500K, 4000K or 5000K) Two lumen outputs in each fixture (275lm or 475lm per foot) Edge-lit design eliminates LED diode image Available in five different lengths Built-in on/off rocker switch Linkable up to 400 Watts fixtures 3-wire grounded electrical port on both ends for power or linking Quick connect stab-in connectors included Captive Screws for easy mounting Integral dimmable driver Length: 11″ Input Voltage: 120V Lumens / Wattage: 275lm or 475lm per ft. / 7W Color Temperature: Selectable CCT (27K/30K/35K/40K/50K) Color Rendering Index: 90+ CRI Dimming: Triac or ELV Finish: Bronze or White Maximum Run Length: 400W max. Accessories: NUA-802: Junction Box NUA-805: 72″ Cord & Plug Power Cord NUA-804: 72″ Hardwire Power Cord NUA-803: End-to-End Connector NUA-806: 6″ Jumper Cable NUA-812: 12″ Jumper Cable NUA-824: 24″ Jumper Cable NUA-872: 72″ Jumper Cable - [NUDTW-8818/23345](https://noralighting.com/product/nudtw-8818-23345/) - LEDUR LED Under cabinet luminaires include two switches to change the color temperature and lumen output. Five color temperature options and two lumen outputs creates ten different fixtures in one! Color temperature options range from 2700K, 3000K, 3500K, 4000K or 5000K @ 90 CRI. Luminaires produces an 275 lumens or 475 lumens average per foot. LEDUR uniform reflectance is excellent when used under cabinet over granite, polished stone or any reflective surface, additionally it is excellent in retail display lighting where diode image might distract from display merchandise. FEATURES Ten fixtures in one! (5 CCT options and 2 lumen outputs) Five color temperatures in each fixture (2700K, 3000K, 3500K, 4000K or 5000K) Two lumen outputs in each fixture (275lm or 475lm per foot) Edge-lit design eliminates LED diode image Available in five different lengths Built-in on/off rocker switch Linkable up to 400 Watts fixtures 3-wire grounded electrical port on both ends for power or linking Quick connect stab-in connectors included Captive Screws for easy mounting Integral dimmable driver Length: 18″ Input Voltage: 120V Lumens / Wattage: 275lm or 475lm per ft. / 9W Color Temperature: Selectable CCT (27K/30K/35K/40K/50K) Color Rendering Index: 90+ CRI Dimming: Triac or ELV Finish: White Maximum Run Length: 400W max. Accessories: NUA-802: Junction Box NUA-805: 72″ Cord & Plug Power Cord NUA-804: 72″ Hardwire Power Cord NUA-803: End-to-End Connector NUA-806: 6″ Jumper Cable NUA-812: 12″ Jumper Cable NUA-824: 24″ Jumper Cable NUA-872: 72″ Jumper Cable - [NUDTW-8842/23345](https://noralighting.com/product/nudtw-8842-23345/) - LEDUR LED Under cabinet luminaires include two switches to change the color temperature and lumen output. Five color temperature options and two lumen outputs creates ten different fixtures in one! Color temperature options range from 2700K, 3000K, 3500K, 4000K or 5000K @ 90 CRI. Luminaires produces an 275 lumens or 475 lumens average per foot. LEDUR uniform reflectance is excellent when used under cabinet over granite, polished stone or any reflective surface, additionally it is excellent in retail display lighting where diode image might distract from display merchandise. FEATURES Ten fixtures in one! (5 CCT options and 2 lumen outputs) Five color temperatures in each fixture (2700K, 3000K, 3500K, 4000K or 5000K) Two lumen outputs in each fixture (275lm or 475lm per foot) Edge-lit design eliminates LED diode image Available in five different lengths Built-in on/off rocker switch Linkable up to 400 Watts fixtures 3-wire grounded electrical port on both ends for power or linking Quick connect stab-in connectors included Captive Screws for easy mounting Integral dimmable driver Length: 42″ Input Voltage: 120V Lumens / Wattage: 275lm or 475lm per ft. / 16W Color Temperature: Selectable CCT (27K/30K/35K/40K/50K) Color Rendering Index: 90+ CRI Dimming: Triac or ELV Finish: Bronze or White Maximum Run Length: 400W max. Accessories: NUA-802: Junction Box NUA-805: 72″ Cord & Plug Power Cord NUA-804: 72″ Hardwire Power Cord NUA-803: End-to-End Connector NUA-806: 6″ Jumper Cable NUA-812: 12″ Jumper Cable NUA-824: 24″ Jumper Cable NUA-872: 72″ Jumper Cable - [NUA-902](https://noralighting.com/product/nua-902/) - Junction box used to power LED luminaires using hardwire power cord Finish: Black or White Compatible Luminaires: NULB120: 120V LED Lightbar NUDA: 120V LEDUR Adjustable Under Cabinet NUDTW-98: 120V Bravo LED Linear with Selectable CCT - [NLCBC2-656](https://noralighting.com/product/nlcbc2-656/) - The 6" Cobalt Click LED retrofit series is cULus classified for use in existing IC or non-IC housings manufactured by Nora and others. The patented "Click" system allows the aluminum spun trim to be easily changed in the field, and spring mounting clips properly secure it to the LED module. Features Available with Phase (120V) or 0-10V (120-277V) dimming Includes a medium base socket for easy retrofitting Dedicated CCT, Selectable CCT, or Comfort Dim (warm dim) Emergency options available 5-year limited warranty cULus classified for Wet Locations Patented, see noralighting.com/patents Input Voltage: 120V or 120-277V Lumens: 750lm to 1000lm Color Temperature: Dedicated CCT (2700K, 3000K, 3500K, 4000K) Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Comfort Dim (3000K to 2000K) Dimming: Triac/ELV or 0-10V Compatible Housings: NFBIC-6LMRATA = Fire Rated LED Housing NFBIC-6INCATA = Fire Rated Line Voltage Housing NHIC-27LMRAT = Shallow IC Air-Tight LED Housing NHIC-6LMRAT = IC Air-Tight LED Housing NHICCP-6LMRAT = CCEA LED Housing NHIC-27QAT = Shallow IC Air-Tight Line Voltage Housing NHIC-17QAT = IC Air-Tight Line Voltage Housing NH-26Q = Non-IC Line Voltage Housing NHIC-6G24ATFL = IC Air-Tight GU24 Housing NHRIC-27LMRAT = Shallow IC Air-Tight LED Remodel Housing NHRIC-6LMRAT = IC Air-Tight LED Remodel Housing NHRIC-27QAT = Shallow IC Air-Tight Line Voltage Housing NHRIC-17QAT = IC Air-Tight Line Voltage Housing NHR-26Q = Non-IC Line Voltage Housing Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch (compatible with Selectable CCT only) - [NLCBC2-653](https://noralighting.com/product/nlcbc2-653/) - The 6" Cobalt Click LED retrofit series is cULus classified for use in existing IC or non-IC housings manufactured by Nora and others. The patented "Click" system allows the aluminum spun trim to be easily changed in the field, and spring mounting clips properly secure it to the LED module. Features Available with Phase (120V) or 0-10V (120-277V) dimming Includes a medium base socket for easy retrofitting Dedicated CCT, Selectable CCT, or Comfort Dim (warm dim) Emergency options available 5-year limited warranty cULus classified for Wet Locations Patented, see noralighting.com/patents Input Voltage: 120V or 120-277V Lumens: 750lm to 1000lm Color Temperature: Dedicated CCT (2700K, 3000K, 3500K, 4000K) Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Comfort Dim (3000K to 2000K) Dimming: Triac/ELV or 0-10V Compatible Housings: NFBIC-6LMRATA = Fire Rated LED Housing NFBIC-6INCATA = Fire Rated Line Voltage Housing NHIC-27LMRAT = Shallow IC Air-Tight LED Housing NHIC-6LMRAT = IC Air-Tight LED Housing NHICCP-6LMRAT = CCEA LED Housing NHIC-27QAT = Shallow IC Air-Tight Line Voltage Housing NHIC-17QAT = IC Air-Tight Line Voltage Housing NH-26Q = Non-IC Line Voltage Housing NHIC-6G24ATFL = IC Air-Tight GU24 Housing NHRIC-27LMRAT = Shallow IC Air-Tight LED Remodel Housing NHRIC-6LMRAT = IC Air-Tight LED Remodel Housing NHRIC-27QAT = Shallow IC Air-Tight Line Voltage Housing NHRIC-17QAT = IC Air-Tight Line Voltage Housing NHR-26Q = Non-IC Line Voltage Housing Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch (compatible with Selectable CCT only) - [NLCBC2-652](https://noralighting.com/product/nlcbc2-652/) - The 6" Cobalt Click LED retrofit series is cULus classified for use in existing IC or non-IC housings manufactured by Nora and others. The patented "Click" system allows the aluminum spun trim to be easily changed in the field, and spring mounting clips properly secure it to the LED module. Features Available with Phase (120V) or 0-10V (120-277V) dimming Includes a medium base socket for easy retrofitting Dedicated CCT, Selectable CCT, or Comfort Dim (warm dim) Emergency options available 5-year limited warranty cULus classified for Wet Locations Patented, see noralighting.com/patents Input Voltage: 120V or 120-277V Lumens: 750lm to 1000lm Color Temperature: Dedicated CCT (2700K, 3000K, 3500K, 4000K) Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Comfort Dim (3000K to 2000K) Dimming: Triac/ELV or 0-10V Compatible Housings: NFBIC-6LMRATA = Fire Rated LED Housing NFBIC-6INCATA = Fire Rated Line Voltage Housing NHIC-27LMRAT = Shallow IC Air-Tight LED Housing NHIC-6LMRAT = IC Air-Tight LED Housing NHICCP-6LMRAT = CCEA LED Housing NHIC-27QAT = Shallow IC Air-Tight Line Voltage Housing NHIC-17QAT = IC Air-Tight Line Voltage Housing NH-26Q = Non-IC Line Voltage Housing NHIC-6G24ATFL = IC Air-Tight GU24 Housing NHRIC-27LMRAT = Shallow IC Air-Tight LED Remodel Housing NHRIC-6LMRAT = IC Air-Tight LED Remodel Housing NHRIC-27QAT = Shallow IC Air-Tight Line Voltage Housing NHRIC-17QAT = IC Air-Tight Line Voltage Housing NHR-26Q = Non-IC Line Voltage Housing Accessories: NLCBC-6OR: 6" Oversize Ring NLCBC-6EYELID: 6" Eyelid NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch (compatible with Selectable CCT only) - [NLCBC2-651](https://noralighting.com/product/nlcbc2-651/) - The 6" Cobalt Click LED retrofit series is cULus classified for use in existing IC or non-IC housings manufactured by Nora and others. The patented "Click" system allows the aluminum spun trim to be easily changed in the field, and spring mounting clips properly secure it to the LED module. Features Available with Phase (120V) or 0-10V (120-277V) dimming Includes a medium base socket for easy retrofitting Dedicated CCT, Selectable CCT, or Comfort Dim (warm dim) Emergency options available 5-year limited warranty cULus classified for Wet Locations Patented, see noralighting.com/patents Input Voltage: 120V or 120-277V Lumens: 750lm to 1000lm Color Temperature: Dedicated CCT (2700K, 3000K, 3500K, 4000K) Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Comfort Dim (3000K to 2000K) Dimming: Triac/ELV or 0-10V Compatible Housings: NFBIC-6LMRATA = Fire Rated LED Housing NFBIC-6INCATA = Fire Rated Line Voltage Housing NHIC-27LMRAT = Shallow IC Air-Tight LED Housing NHIC-6LMRAT = IC Air-Tight LED Housing NHICCP-6LMRAT = CCEA LED Housing NHIC-27QAT = Shallow IC Air-Tight Line Voltage Housing NHIC-17QAT = IC Air-Tight Line Voltage Housing NH-26Q = Non-IC Line Voltage Housing NHIC-6G24ATFL = IC Air-Tight GU24 Housing NHRIC-27LMRAT = Shallow IC Air-Tight LED Remodel Housing NHRIC-6LMRAT = IC Air-Tight LED Remodel Housing NHRIC-27QAT = Shallow IC Air-Tight Line Voltage Housing NHRIC-17QAT = IC Air-Tight Line Voltage Housing NHR-26Q = Non-IC Line Voltage Housing Accessories: NLCBC-6OR: 6" Oversize Ring NLCBC-6EYELID: 6" Eyelid NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch (compatible with Selectable CCT only) - [NLCBC2-556](https://noralighting.com/product/nlcbc2-556/) - Cobalt “Click” series offers the end user, distributor, and Nora the quick flexibility to supply over 300 trim variations quickly. Cobalt Click Series reflectors simply "Click" in place on the COB LED engine allowing to easily change from a standard reflector to an application specific reflector. Cobalt Click is available in standard 120V, 277V, Triac 0-10V dimming and EM configurations. The Click on trims are available in reflector, baffle and square styles in various finishes making the Cobalt Click the most versatile LED Retrofit on the market today. Features Available with Phase (120V) or 0-10V (120-277V) dimming Includes a medium base socket for easy retrofitting Dedicated CCT, Selectable CCT, or Comfort Dim (warm dim) Emergency options available 5-year limited warranty cULus classified for Wet Locations Patented, see noralighting.com/patents Lumens / Wattage: 750lm / 12W or 1000lm / 12W Color Temperature: 2700K, 3000K, 3500K, 4000K or Comfort Dim (3100K to 1700K) Compatible Housings: NFBIC-5LMRATA = Fire Rated LED Housing NFBIC-5INCATA = Fire Rated Line Voltage Housing NHIC-527LMRAT = Shallow IC Air-Tight LED Housing NHIC-5LMRAT = IC Air-Tight LED Housing NHIC-527QAT = Shallow IC Air-Tight Line Voltage Housing NHIC-501QAT = IC Air-Tight Line Voltage Housing NHRIC-527LMRAT = Shallow IC Air-Tight LED Remodel Housing NHRIC-5LMRAT = IC Air-Tight LED Remodel Housing NHRIC-527QAT = Shallow IC Air-Tight Line Voltage Housing NHRIC-504QAT = IC Air-Tight Line Voltage Housing Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch (compatible with Selectable CCT only) - [NLCBC2-553](https://noralighting.com/product/nlcbc2-553/) - Cobalt “Click” series offers the end user, distributor, and Nora the quick flexibility to supply over 300 trim variations quickly. Cobalt Click Series reflectors simply "Click" in place on the COB LED engine allowing to easily change from a standard reflector to an application specific reflector. Cobalt Click is available in standard 120V, 277V, Triac 0-10V dimming and EM configurations. The Click on trims are available in reflector, baffle and square styles in various finishes making the Cobalt Click the most versatile LED Retrofit on the market today. Features Available with Phase (120V) or 0-10V (120-277V) dimming Includes a medium base socket for easy retrofitting Dedicated CCT, Selectable CCT, or Comfort Dim (warm dim) Emergency options available 5-year limited warranty cULus classified for Wet Locations Patented, see noralighting.com/patents Lumens / Wattage: 750lm / 12W or 1000lm / 12W Color Temperature: 2700K, 3000K, 3500K, 4000K or Comfort Dim (3100K to 1700K) Compatible Housings: NFBIC-5LMRATA = Fire Rated LED Housing NFBIC-5INCATA = Fire Rated Line Voltage Housing NHIC-527LMRAT = Shallow IC Air-Tight LED Housing NHIC-5LMRAT = IC Air-Tight LED Housing NHIC-527QAT = Shallow IC Air-Tight Line Voltage Housing NHIC-501QAT = IC Air-Tight Line Voltage Housing NHRIC-527LMRAT = Shallow IC Air-Tight LED Remodel Housing NHRIC-5LMRAT = IC Air-Tight LED Remodel Housing NHRIC-527QAT = Shallow IC Air-Tight Line Voltage Housing NHRIC-504QAT = IC Air-Tight Line Voltage Housing Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch (compatible with Selectable CCT only) - [NLCBC2-552](https://noralighting.com/product/nlcbc2-552/) - Cobalt “Click” series offers the end user, distributor, and Nora the quick flexibility to supply over 300 trim variations quickly. Cobalt Click Series reflectors simply "Click" in place on the COB LED engine allowing to easily change from a standard reflector to an application specific reflector. Cobalt Click is available in standard 120V, 277V, Triac 0-10V dimming and EM configurations. The Click on trims are available in reflector, baffle and square styles in various finishes making the Cobalt Click the most versatile LED Retrofit on the market today. Features Available with Phase (120V) or 0-10V (120-277V) dimming Includes a medium base socket for easy retrofitting Dedicated CCT, Selectable CCT, or Comfort Dim (warm dim) Emergency options available 5-year limited warranty cULus classified for Wet Locations Patented, see noralighting.com/patents Lumens / Wattage: 750lm / 12W or 1000lm / 12W Color Temperature: 2700K, 3000K, 3500K, 4000K or Comfort Dim (3100K to 1700K) Compatible Housings: NFBIC-5LMRATA = Fire Rated LED Housing NFBIC-5INCATA = Fire Rated Line Voltage Housing NHIC-527LMRAT = Shallow IC Air-Tight LED Housing NHIC-5LMRAT = IC Air-Tight LED Housing NHIC-527QAT = Shallow IC Air-Tight Line Voltage Housing NHIC-501QAT = IC Air-Tight Line Voltage Housing NHRIC-527LMRAT = Shallow IC Air-Tight LED Remodel Housing NHRIC-5LMRAT = IC Air-Tight LED Remodel Housing NHRIC-527QAT = Shallow IC Air-Tight Line Voltage Housing NHRIC-504QAT = IC Air-Tight Line Voltage Housing Accessories: NLCBC-5OR = 5" Oversize Ring NLCBC-5EYELID = 5" Eyelid NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch (compatible with Selectable CCT only) - [NLCBC2-551](https://noralighting.com/product/nlcbc2-551/) - The 5" Cobalt Click LED retrofit series is cULus classified for use in existing IC or non-IC housings manufactured by Nora and others. The patented "Click" system allows the aluminum spun trim to be easily changed in the field, and spring mounting clips properly secure it to the LED module. Features Available with Phase (120V) or 0-10V (120-277V) dimming Includes a medium base socket for easy retrofitting Dedicated CCT, Selectable CCT, or Comfort Dim (warm dim) Emergency options available 5-year limited warranty cULus classified for Wet Locations Patented, see noralighting.com/patents Input Voltage: 120V or 120-277V Lumens: 750lm to 1000lm Color Temperature: Dedicated CCT (2700K, 3000K, 3500K, 4000K) Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Comfort Dim (3000K to 2000K) Dimming: Triac/ELV or 0-10V Compatible Housings: NFBIC-5LMRATA = Fire Rated LED Housing NFBIC-5INCATA = Fire Rated Line Voltage Housing NHIC-527LMRAT = Shallow IC Air-Tight LED Housing NHIC-5LMRAT = IC Air-Tight LED Housing NHIC-527QAT = Shallow IC Air-Tight Line Voltage Housing NHIC-501QAT = IC Air-Tight Line Voltage Housing NHRIC-527LMRAT = Shallow IC Air-Tight LED Remodel Housing NHRIC-5LMRAT = IC Air-Tight LED Remodel Housing NHRIC-527QAT = Shallow IC Air-Tight Line Voltage Housing NHRIC-504QAT = IC Air-Tight Line Voltage Housing Accessories: NLCBC-5OR = 5" Oversize Ring NLCBC-5EYELID = 5" Eyelid NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch (compatible with Selectable CCT only) - [NLCBC2-453](https://noralighting.com/product/nlcbc2-453/) - The 4" Cobalt Click LED retrofit series is cULus classified for use in existing IC or non-IC housings manufactured by Nora and others. The patented "Click" system allows the aluminum spun trim to be easily changed in the field, and spring mounting clips properly secure it to the LED module. Features Available with Phase (120V) or 0-10V (120-277V) dimming Includes a medium base socket for easy retrofitting Emergency wiring option 5-year limited warranty cULus classified for Wet Locations Certified to the high efficacy requirements of California Title 24 JA8-2025 Patented, see noralighting.com/patents Input Voltage: 120V or 120-277V Lumens: 750lm to 1000lm Color Temperature: Dedicated CCT (2700K, 3000K, 3500K, 4000K) Comfort Dim (3000K to 2000K) Dimming: Triac/ELV or 0-10V Compatible Housings: NFBIC-4LMRATA = Fire Rated LED Housing NFBIC-4INCATA = Fire Rated Line Voltage Housing NHIC-4LMRAT = IC Air-Tight LED Housing NHICCP-4LMRAT = CCEA LED Housing NSIC-401QAT = IC Air-Tight Line Voltage Housing NS-401QAT = Non-IC Air-Tight Line Voltage Housing NHIC-4G24AT = IC Air-Tight GU24 Housing NHRIC-4LMRAT = IC Air-Tight LED Remodel Housing NSRIC-404QAT = IC Air-Tight Line Voltage Housing NSR-404QAT = Non-IC Air-Tight Line Voltage Housing - [NLCBC2-455](https://noralighting.com/product/nlcbc2-455/) - The 4" Cobalt Click LED retrofit series is cULus classified for use in existing IC or non-IC housings manufactured by Nora and others. The patented "Click" system allows the aluminum spun trim to be easily changed in the field, and spring mounting clips properly secure it to the LED module. Features Available with Phase (120V) or 0-10V (120-277V) dimming Includes a medium base socket for easy retrofitting Dedicated CCT, Selectable CCT, or Comfort Dim (warm dim) Emergency options available 5-year limited warranty cULus classified for Wet Locations Certified to the high efficacy requirements of California Title 24 JA8-2025 Patented, see noralighting.com/patents Input Voltage: 120V or 120-277V Lumens: 750lm to 1000lm Color Temperature: Dedicated CCT (2700K, 3000K, 3500K, 4000K) Comfort Dim (3000K to 2000K) Dimming: Triac/ELV or 0-10V Compatible Housings: NFBIC-4LMRATA = Fire Rated LED Housing NFBIC-4INCATA = Fire Rated Line Voltage Housing NHIC-4LMRAT = IC Air-Tight LED Housing NHICCP-4LMRAT = CCEA LED Housing NSIC-401QAT = IC Air-Tight Line Voltage Housing NS-401QAT = Non-IC Air-Tight Line Voltage Housing NHIC-4G24AT = IC Air-Tight GU24 Housing NHRIC-4LMRAT = IC Air-Tight LED Remodel Housing NSRIC-404QAT = IC Air-Tight Line Voltage Housing NSR-404QAT = Non-IC Air-Tight Line Voltage Housing - [NLCBC2-451](https://noralighting.com/product/nlcbc2-451/) - The 4" Cobalt Click LED retrofit series is cULus classified for use in existing IC or non-IC housings manufactured by Nora and others. The patented "Click" system allows the aluminum spun trim to be easily changed in the field, and spring mounting clips properly secure it to the LED module. Features Available with Phase (120V) or 0-10V (120-277V) dimming Includes a medium base socket for easy retrofitting Dedicated CCT, Selectable CCT, or Comfort Dim (warm dim) Emergency options available 5-year limited warranty cULus classified for Wet Locations Certified to the high efficacy requirements of California Title 24 JA8-2025 Patented, see noralighting.com/patents Input Voltage: 120V or 120-277V Lumens: 750lm to 1000lm Color Temperature: Dedicated CCT (2700K, 3000K, 3500K, 4000K) Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Comfort Dim (3000K to 2000K) Dimming: Triac/ELV or 0-10V Compatible Housings: NFBIC-4LMRATA = Fire Rated LED Housing NFBIC-4INCATA = Fire Rated Line Voltage Housing NFJB-R4 = Fire Rated IC Air-Tight Junction Box Housing (NLCBC2-451TW only) NHIC-4LMRAT = IC Air-Tight LED Housing NHICCP-4LMRAT = CCEA LED Housing NSIC-401QAT = IC Air-Tight Line Voltage Housing NS-401QAT = Non-IC Air-Tight Line Voltage Housing NHIC-4G24AT = IC Air-Tight GU24 Housing NHRIC-4LMRAT = IC Air-Tight LED Remodel Housing NSRIC-404QAT = IC Air-Tight Line Voltage Housing NSR-404QAT = Non-IC Air-Tight Line Voltage Housing Accessories: NLCBC-4OR = 4" Oversize Ring NLCBC-4EYELID = 4" Eyelid NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch (compatible with Selectable CCT only) - [NLCBC2-452](https://noralighting.com/product/nlcbc2-452/) - The 4" Cobalt Click LED retrofit series is cULus classified for use in existing IC or non-IC housings manufactured by Nora and others. The patented "Click" system allows the aluminum spun trim to be easily changed in the field, and spring mounting clips properly secure it to the LED module. Features Available with Phase (120V) or 0-10V (120-277V) dimming Includes a medium base socket for easy retrofitting Dedicated CCT, Selectable CCT, or Comfort Dim (warm dim) Emergency options available 5-year limited warranty cULus classified for Wet Locations Certified to the high efficacy requirements of California Title 24 JA8-2025 Patented, see noralighting.com/patents Input Voltage: 120V or 120-277V Lumens: 750lm to 1000lm Color Temperature: Dedicated CCT (2700K, 3000K, 3500K, 4000K) Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Comfort Dim (3000K to 2000K) Dimming: Triac/ELV or 0-10V Compatible Housings: NFBIC-4LMRATA = Fire Rated LED Housing NFBIC-4INCATA = Fire Rated Line Voltage Housing NFJB-R4 = Fire Rated IC Air-Tight Junction Box Housing (NLCBC2-452TW only) NHIC-4LMRAT = IC Air-Tight LED Housing NHICCP-4LMRAT = CCEA LED Housing NSIC-401QAT = IC Air-Tight Line Voltage Housing NS-401QAT = Non-IC Air-Tight Line Voltage Housing NHIC-4G24AT = IC Air-Tight GU24 Housing NHRIC-4LMRAT = IC Air-Tight LED Remodel Housing NSRIC-404QAT = IC Air-Tight Line Voltage Housing NSR-404QAT = Non-IC Air-Tight Line Voltage Housing Accessories: NLCBC-4OR = 4" Oversize Ring NLCBC-4EYELID = 4" Eyelid NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch (compatible with Selectable CCT only) - [NLCB2-652](https://noralighting.com/product/nlcb2-652/) - Cobalt High Lumens Series features Dedicated New Construction and Remodel Housings rated for IC Air-Tight or Non-IC applications. Cobalt High Lumen reflectors produce up to 2000 lumens in 2700K, 3000K, 3500K or 4000K @ 90+ CRI. 6" Reflectors are wet location rated, and can be used to comply with Title 24 when used with ICAT housing. The Cobalt series intergrates a Cree® COB family of LED arrays, giving bright spectacular light output and low power consumption. An obvious and smart choice for Green Energy efficient lighting in commercial and residential applications. Features Deep set optics for visual comfort Nora UTM (Unitized Thermal Management) includes thick, die-cast aluminum heat sink to dissipate heat from LEDs. Dimmable (Triac, ELV or 0-10V) Patented, see noralighting.com/patents Lumens: 1500lm or 2000lm Color Temperatures: 2700K, 3000K, 3500K, 4000K or Comfort Dim (Warm Dim) Compatible Housings NHICCB-6: IC Air-Tight New Construction NHCB-6: Non-IC New Construction NHRCB-6: Non-IC Remodel Listing: - cULus Listed for Wet Location when used with compatible housing - 5-Year Limited Warranty - Certified to the high efficacy requirements of California Title 24 JA8-2025 - [NLCB2-651](https://noralighting.com/product/nlcb2-651/) - Cobalt High Lumens Series features Dedicated New Construction and Remodel Housings rated for IC Air-Tight or Non-IC applications. Cobalt High Lumen reflectors produce up to 2000 lumens in 2700K, 3000K, 3500K or 4000K @ 90+ CRI. 6" Reflectors are wet location rated, and can be used to comply with Title 24 when used with ICAT housing. The Cobalt series intergrates a Cree® COB family of LED arrays, giving bright spectacular light output and low power consumption. An obvious and smart choice for Green Energy efficient lighting in commercial and residential applications. Features Deep set optics for visual comfort Nora UTM (Unitized Thermal Management) includes thick, die-cast aluminum heat sink to dissipate heat from LEDs. Dimmable (Triac, ELV or 0-10V) Patented, see noralighting.com/patents Lumens: 1500lm or 2000lm Color Temperatures: 2700K, 3000K, 3500K, 4000K or Comfort Dim (Warm Dim) Compatible Housings NHICCB-6: IC Air-Tight New Construction NHCB-6: Non-IC New Construction NHRCB-6: Non-IC Remodel Listing: - cULus Listed for Wet Location when used with compatible housing - 5-Year Limited Warranty - Certified to the high efficacy requirements of California Title 24 JA8-2025 - [NLCB2-656](https://noralighting.com/product/nlcb2-656/) - Cobalt High Lumens Series features Dedicated New Construction and Remodel Housings rated for IC Air-Tight or Non-IC applications. Cobalt High Lumen reflectors produce up to 2000 lumens in 2700K, 3000K, 3500K or 4000K @ 90+ CRI. 6" Reflectors are wet location rated, and can be used to comply with Title 24 when used with ICAT housing. The Cobalt series intergrates a Cree® COB family of LED arrays, giving bright spectacular light output and low power consumption. An obvious and smart choice for Green Energy efficient lighting in commercial and residential applications. Features Deep set optics for visual comfort Nora UTM (Unitized Thermal Management) includes thick, die-cast aluminum heat sink to dissipate heat from LEDs. Dimmable (Triac, ELV or 0-10V) Patented, see noralighting.com/patents Lumens: 1500lm or 2000lm Color Temperatures: 2700K, 3000K, 3500K, 4000K or Comfort Dim (Warm Dim) Compatible Housings NHICCB-6: IC Air-Tight New Construction NHCB-6: Non-IC New Construction NHRCB-6: Non-IC Remodel Listing: - cULus Listed for Wet Location when used with compatible housing - 5-Year Limited Warranty - Certified to the high efficacy requirements of California Title 24 JA8-2025 - [NLCB2-653](https://noralighting.com/product/nlcb2-653/) - Cobalt High Lumens Series features Dedicated New Construction and Remodel Housings rated for IC Air-Tight or Non-IC applications. Cobalt High Lumen reflectors produce up to 2000 lumens in 2700K, 3000K, 3500K or 4000K @ 90+ CRI. 6" Reflectors are wet location rated, and can be used to comply with Title 24 when used with ICAT housing. The Cobalt series intergrates a Cree® COB family of LED arrays, giving bright spectacular light output and low power consumption. An obvious and smart choice for Green Energy efficient lighting in commercial and residential applications. Features Deep set optics for visual comfort Nora UTM (Unitized Thermal Management) includes thick, die-cast aluminum heat sink to dissipate heat from LEDs. Dimmable (Triac, ELV or 0-10V) Patented, see noralighting.com/patents Lumens: 1500lm or 2000lm Color Temperatures: 2700K, 3000K, 3500K, 4000K or Comfort Dim (Warm Dim) Compatible Housings NHICCB-6: IC Air-Tight New Construction NHCB-6: Non-IC New Construction NHRCB-6: Non-IC Remodel Listing: - cULus Listed for Wet Location when used with compatible housing - 5-Year Limited Warranty - Certified to the high efficacy requirements of California Title 24 JA8-2025 - [NLCBS-4W52](https://noralighting.com/product/nlcbs-4w52/) - 4” Cobalt shallow reflectors are dedicated for Cobalt shallow housing. Available in multiple finishes and lumens outputs, also in round and square apertures. Cobalt family utilize Cree LED technology throughout, for a consistent and uniform appearance. Features - Cree® COB LED Technology - 5-Year limited warranty - cULus listed for wet locations - Patented, see noralighting.com/patents Compatible Housings: NHSIC-4 Color Temperatures: 2700K, 3000K, 3500K, 4000K Lumens / Wattage: 850lm / 13.5W or 1250lm / 16.5W - [NLCBS-456](https://noralighting.com/product/nlcbs-456/) - 4” Cobalt shallow reflectors are dedicated for Cobalt shallow housing. Available in multiple finishes and lumens outputs, also in round and square apertures. Cobalt family utilize Cree LED technology throughout, for a consistent and uniform appearance. Features - Cree® COB LED Technology - 5-Year limited warranty - cULus listed for wet locations - Patented, see noralighting.com/patents Compatible Housings: NHSIC-4 Color Temperatures: 2700K, 3000K, 3500K, 4000K Lumens / Wattage: 850lm / 13.5W or 1250lm / 16.5W - [NLCBS-453](https://noralighting.com/product/nlcbs-453/) - 4” Cobalt shallow reflectors are dedicated for Cobalt shallow housing. Available in multiple finishes and lumens outputs, also in round and square apertures. Cobalt family utilize Cree LED technology throughout, for a consistent and uniform appearance. Features - Cree® COB LED Technology - 5-Year limited warranty - cULus listed for wet locations - Patented, see noralighting.com/patents Compatible Housings: NHSIC-4 Color Temperatures: 2700K, 3000K, 3500K, 4000K Lumens / Wattage: 850lm / 13.5W or 1250lm / 16.5W - [NLCBS-4W51](https://noralighting.com/product/nlcbs-4w51/) - 4” Cobalt shallow reflectors are dedicated for Cobalt shallow housing. Available in multiple finishes and lumens outputs, also in round and square apertures. Cobalt family utilize Cree LED technology throughout, for a consistent and uniform appearance. Features - Cree® COB LED Technology - 5-Year limited warranty - cULus listed for wet locations - Patented, see noralighting.com/patents Compatible Housing: NHSIC-4 Color Temperatures: 2700K, 3000K, 3500K, 4000K Lumens / Wattage: 850lm / 13.5W or 1250lm / 16.5W - [NRLIN-2](https://noralighting.com/product/nrlin-2/) - L-Line Linear series offers a clean and modern appearance with a sleek extruded aluminum housing. Symmetrical light distribution will evenly illuminate surfaces with a diffused lens, making the L-Line ideal for commercial, retail, healthcare and education applications. FEATURES Internal quick connects for easy connection to additional luminaires Dedicated CCT (3000K, 3500K or 4000K) Also available in surface mount, pendant mounted or wall mounted Patented, see noralighting.com/patents Length: 2' (actual length 25") Input Voltage: 120-277V Lumens / Wattage: 2100lm / 23W Color Temperature: 3000K, 3500K, or 4000K Color Rendering Index: 80+ CRI Dimming: 0-10V Finish: Aluminum or White Accessories: NRLIN-BRKT: Bracket for Continuous Runs (includes spacer) NLINSW-LENS/41: 41-ft. Continuous Lens (field cuttable) NLINSW-LENS/81: 81-ft. Continuous Lens (field cuttable) NEPK-20LEDUNV: 20W Emergency Battery with Remote Test Switch - [NRLIN-4](https://noralighting.com/product/nrlin-4/) - L-Line Linear series offers a clean and modern appearance with a sleek extruded aluminum housing. Symmetrical light distribution will evenly illuminate surfaces with a diffused lens, making the L-Line ideal for commercial, retail, healthcare and education applications. FEATURES Internal quick connects for easy connection to additional luminaires Dedicated CCT (3000K, 3500K or 4000K) Also available in surface mount, pendant mounted or wall mounted Patented, see noralighting.com/patents Length: 4' (actual length 49") Input Voltage: 120-277V Lumens / Wattage: 4200lm / 41W Color Temperature: 3000K, 3500K or 4000K Color Rendering Index: 80+ CRI Dimming: 0-10V Finish: Aluminum or White Accessories: NRLIN-BRKT: Bracket for Continuous Runs (includes spacer) NLINSW-LENS/41: 41-ft. Continuous Lens (field cuttable) NLINSW-LENS/81: 81-ft. Continuous Lens (field cuttable) NEPK-20LEDUNV: 20W Emergency Battery with Remote Test Switch - [NRLIN-8](https://noralighting.com/product/nrlin-8/) - L-Line Linear series offers a clean and modern appearance with a sleek extruded aluminum housing. Symmetrical light distribution will evenly illuminate surfaces with a diffused lens, making the L-Line ideal for commercial, retail, healthcare and education applications. FEATURES Internal quick connects for easy connection to additional luminaires Dedicated CCT (3000K, 3500K or 4000K) Also available in surface mount, pendant mounted or wall mounted Patented, see noralighting.com/patents Length: 8' (actual length 93.375") Input Voltage: 120-277V Lumens / Wattage: 8400lm / 82W Color Temperature: 3000K, 3500K or 4000K Color Rendering Index: 80+ CRI Dimming: 0-10V Finish: Aluminum or White Accessories: NRLIN-BRKT: Bracket for Continuous Runs (includes spacer) NLINSW-LENS/41: 41-ft. Continuous Lens (field cuttable) NLINSW-LENS/81: 81-ft. Continuous Lens (field cuttable) NEPK-20LEDUNV: 20W Emergency Battery with Remote Test Switch - [NMHIOIC-11LE4](https://noralighting.com/product/nmhioic-11-le4/) - IC new construction housing for Iolite Mulitple Lighting System. Accepts One Head Iolite Multiple Flanged (NMIOT-11) or Trimless (NMIOTL-11). Includes one LED driver with Triac/ELV and 0-10V dimming and 120/277V input. Features: IC rated housing Dimmable Utilizes same technology as Iolite Downlight Series Includes 24-1/2" hanger bars with alignment feet cULus listed for damp location - [NPTCB-E22](https://noralighting.com/product/nptcb-e22/) - ** While Supplies Last: Replacement Item: NPTCBSW-22 ** Energy-efficient and economical Center Basket LED Troffer produces an incredible amount of smooth and uniform general lighting. Fixtures are 120V/277V with 0–10V dimming, are available in a range of Kelvin temperatures and are DLC listed. The fixtures include a diffused, removable lens, a hinged access plate with LED board and built-in earthquake clips. The shallow housing design and easy access wiring plate make the Center Basket Troffer a quick installation. Ideal for use in task areas where general illumination is desired such as offices, schools, conference rooms, libraries, retail, hospitals and others. Features Architectural style and quality Complete room illumination Soft, uniform reflectance Fits most grid ceilings Removable diffused lens evenly distributes light and maximizes performance Two replaceable LED Strips with tightly spaced diodes eliminate the diode image Enclosed driver compartment easily accessible from below via a hinged LED platform Built-in earthquake clips cULus Damp Location Listed DLC listed Input Voltage: 120-277VAC Lumens / Wattage: 3400lm / 33W Color Temperature: 5000K Dimming: 0-10V Finish: White Emergency: Optional integrated emergency battery with remote test switch - [NPDBL-24RFK/W](https://noralighting.com/product/npdbl-24rfk-w/) - The white finished flange kit consists of one piece. The assembled frame is installed into a hard ceiling. The LED panel lifts and shifts in the frame ending in a finished flush appearance. Compatible Luminaires: NCSP-24: 2' x 4' Contractor Series Backlit Panels with Selectable Lumens & CCT NPDBL-E24: 2'x4' LED Backlit Panels NPDBLSW-E24: 2'x4' LED Backlit Panels with Selectable Lumens & CCT NPTCB-E24: 2'x4' LED Troffer Finish: White - [NPDBL-22RFK/W](https://noralighting.com/product/npdbl-22rfk-w/) - The white-finished flange kit consists of one piece. The assembled frame is installed into a hard ceiling. The LED panel lifts and shifts in the frame ending in a finished flush appearance. Compatible Luminaires: NCSP-22: 2' x 2' Contractor Series Backlit Panels with Selectable Lumens & CCT NPDBL-E22: 2'x2' LED Backlit Panels NPDBLSW-E22: 2'x2' LED Backlit Panels with Selectable Lumens & CCT NPTCB-E22: 2'x2' LED Troffer Finish: White - [NPDBL-14RFK/W](https://noralighting.com/product/npdbl-14rfk-w/) - The white finished flange kit consist of one piece. The assembled frame installs into a hard ceiling. The LED panel lifts and shifts in the frame ending in a finished flush appearance. Compatible Panels / Troffers: NPDBL-E14 = 1'x4' LED Backlit Panels NPDBLSW-E14 = 1'x4' LED Backlit Panels with Selectable Lumens & CCT NPTCB-E14 = 1'x4' LED Troffers Finish: White - [NPDBL-JB4X4](https://noralighting.com/product/npdbl-jb4x4/) - 4" Junction box for LED Backlit Panels. Junction box mounts on panel to allow them be daisy chained together on the same switch (4-in / 4-out) Compatible Luminaires: NCSP-22: 2' x 2' Contractor Series Backlit Panels with Selectable Lumens & CCT NCSP-24: 2' x 4' Contractor Series Backlit Panels with Selectable Lumens & CCT NPDBL-E22: 2' x 2' LED Backlit Panels NPDBLSW-E22: 2' x 2' LED Backlit Panels with Selectable Lumens & CCT NPDBL-E24: 2' x 4' LED Backlit Panels NPDBLSW-E24: 2' x 4' LED Backlit Panels with Selectable Lumens & CCT NPDBL-E14: 1' x 4' LED Backlit Panels NPDBLSW-E14: 1' x 4' LED Backlit Panels with Selectable Lumens & CCT - [NPDBL-PKW](https://noralighting.com/product/npdbl-pkw/) - Allows LED panel to be suspended as a pendant. White finished canopy has grip lock fasteners to allow for field adjustment from 12" to 96". Canopy includes 8' power cord that can be shortened in the field. Pendant kit may be used with surface mounting frames. Canopy Dimension: Width: 6" Length: 6" Height: 0.75" Cord & Cable: 8'-6" Compatible Luminaires: NPDBL-E14: 1' x 4' LED Backlit Panel NPDBLSW-E14: 1' x 4' LED Backlit Panel with Selectable Lumens NPDBL-E22: 2' x 2' LED Backlit Panel NPDBLSW-E22: 2' x 2' LED Backlit Panel with Selectable Lumens NPDBL-E24: 2' x 4' LED Backlit Panel NPDBLSW-E24: 2' x 4' LED Backlit Panel with Selectable Lumens Finish: White - [NPDBL-24DDFK](https://noralighting.com/product/npdbl-24ddfk/) - 2' x 4' Frame mounts over an existing junction box and panel slides into place. Surface frame extends only 4.33" from the ceiling. Not compatible with pendant kit. Compatible Panels: NPDBL-E22 = 2' x 4' LED Backlit Panel with Emergency NPDBLSW-E22 = 2' x 4' LED Backlit Panel w/ Selectable Lumens & CCT and Emergency Compatible Pendant Kits: NPDBL-PK/W = Pendant Kit, White Finish Dimension: Width: 24" Length: 48" Height: 4.33" Finish: White - [NPDBL-24DFK](https://noralighting.com/product/npdbl-24dfk/) - 2' x 4' Frame mounts over an existing junction box and the panel slides into place. The surface frame extends only 2.5" from the ceiling. May be used in combination with a pendant kit for a complete finished appearance. Compatible Luminaires: NCSP-24: 2' x 4' Contractor Series Backlit Panels with Selectable Lumens & CCT NPDBL-E24: 2' x 4' LED Backlit Panel NPDBLSW-E24: 2' x 4' LED Backlit Panel with Selectable Lumens & CCT Compatible Pendant Kits: NPDBL-PK/W: Pendant Kit, White Finish Dimension: Width: 24" Length: 48" Height: 2.5" Finish: White - [NPDBL-22DDFK](https://noralighting.com/product/npdbl-22ddfk/) - 2' x 2' Frame mounts over an existing junction box and panel slides into place. Surface frame extends only 4.33" from the ceiling. Not compatible with pendant kit. Compatible Panels: NPDBL-E22 = 2' x 2' LED Backlit Panel with Emergency NPDBLSW-E22 = 2' x 2' LED Backlit Panel w/ Selectable Lumens & CCT and Emergency Compatible Pendant Kits: NPDBL-PK/W = Pendant Kit, White Finish Dimension: Width: 24" Length: 24" Height: 4.33" Finish: White - [NPDBL-22DFK](https://noralighting.com/product/npdbl-22dfk/) - 2' x 2' Frame mounts over an existing junction box and the panel slides into place. The surface frame extends only 2.5" from the ceiling. May be used in combination with a pendant kit for a complete finished appearance. Compatible Luminaires: NCSP-22: 2' x 2' Contractor Series Backlit Panels with Selectable Lumens & CCT NPDBL-E22: 2' x 2' LED Backlit Panel NPDBLSW-E22: 2' x 2' LED Backlit Panel with Selectable Lumens & CCT Compatible Pendant Kits: NPDBL-PK/W: Pendant Kit, White Finish Dimension: Width: 24" Length: 24" Height: 2.5" Finish: White - [NPDBL-14DDFK](https://noralighting.com/product/npdbl-14ddfk/) - 1' x 4' Frame mounts over an existing junction box and panel slides into place. Surface frame extends only 4.33" from the ceiling. Not compatible with pendant kit. Compatible Panels: NPDBL-E14 = 1' x 4' LED Backlit Panel with Emergency NPDBLSW-E14 = 1' x 4' LED Backlit Panel w/ Selectable Lumens & CCT and Emergency Dimension: Width: 12" Length: 48" Height: 4.33" Finish: White - [NPDBL-14DFK](https://noralighting.com/product/npdbl-14dfk/) - 1' x 4' Frame mounts over an existing junction box and panel slides into place. Surface frame extends only 2.5" from the ceiling. May be used in combination with pendant kit for a complete finished appearance. Compatible Panels: NPDBL-E14 = 1' x 4' LED Backlit Panel NPDBLSW-E14 = 1' x 4' LED Backlit Panel w/ Selectable Lumens & CCT Compatible Pendant Kits: NPDBL-PK/W = Pendant Kit, White Finish Dimension: Width: 12" Length: 48" Height: 2.5" Finish: White - [NUTP13](https://noralighting.com/product/nutp13/) - Custom 120V LED Tape Light system can be specified up to 150' with various power cords and accessories. Tape light is IP65 rated for indoor and outdoor applications, and produces 330 lumens per foot in dedicated color temperatures (2700K, 3000K or 4000K). To maintain ETL listing and IP65 rating, system is cut and capped/sealed in the factory. FEATURES · IP65 rated for wet locations · 120VAC system - integrated LED driver · Hardwired or Cord & Plug · 330 lumens / 3.6W per foot · Available in a range of color temperatures (2700K, 3000K or 4000K) · 150' maximum length and available in custom lengths · Mounting clips included and aluminum channel available Input Voltage: 120V Lumens / Wattage: 330lm / 3.6W per foot Color Temperature: 2700K, 3000K or 4000K Dimming: Triac Maximum Run Length: 150' Power Cord: Hardwired, Hardwired with Surge Protector, Cord & Plug, Cord & Plug with Surge Protector (factory installed) Surge Protector: Power cord can be specified with integral surge protector or installed separately (NATL-IP65/SP) Compatible Channels: NATL-CIP25: 4' Deep Recessed Channel (includes NUTP13-ADHTAPE) NATL-CIP26: 4' Deep Channel (includes NUTP13-ADHTAPE) NUTP13-ADHTAPE: 3M Adhesive (required for channels) NATL-IP6512: Mounting Clips, Set of Two (included with luminaire) Connectors (factory installed): NATL-IP65/EW-06: 6" Extension Cable NATL-IP65/C90-L: 90° Left Connector NATL-IP65/C90-R: 90° Right Connector - [NFC-R313](https://noralighting.com/product/nfc-r313/) - New construction frame-in with collar for pre-wiring and easier layout planning. Dimensions: 12.06" x 7.56" Compatible Fixtures: NIOC-2RNB: 2" Iolite Can-less Round Bullnose NIOC-2RNDC: 2" Iolite Can-less Round Downlight NIOC-2RPH: 2" Iolite Can-less Round Pinhole NIOC-2SNDSQ: 2" Iolite Can-less Square Downlight NMW-4: 4" M-Wave Adjustable Can-less Downlight - [NYLI-6W](https://noralighting.com/product/nyli-6w/) - Architectural grade cylinder with medium base socket attached to a deep cone reflector or baffle for optimal visual comfort. 2-piece cylinder allows for easy installation and multiple mounting options. Use with incandescent BR/PAR lamps or with energy efficient long life LED lamps. Features 120V input Medium Base Socket for Incandescent or LED lamp Also available in Surface, Stem or Cable mounted 300W max. 5-Year limited warranty cULus listed for indoor wet location with feed through Socket: Medium Base Socket Wattage: 300W max. Mounting: Cylinder is supplied with hardware to mount directly over junction box. Reflector Styles: Available with Baffle or Reflector styles - [NYLI-6P](https://noralighting.com/product/nyli-6p/) - Architectural grade cylinder with medium base socket attached to a deep cone reflector or baffle for optimal visual comfort. 2-piece cylinder allows for easy installation and multiple mounting options. Use with incandescent BR/PAR lamps or with energy efficient long life LED lamps. Features 120V input Medium Base Socket for Incandescent or LED lamp Also available in Surface, Stem or Cable mounted 300W max. 5-Year limited warranty cULus listed for indoor damp location with feed through Socket: Medium Base Socket Wattage: 300W max. Mounting: Cylinder includes five threaded rods that can be customized up to 7' and attached to matching canopy Reflector Styles: Available with Baffle or Reflector styles - [NYLI-6C](https://noralighting.com/product/nyli-6c/) - Architectural grade cylinder with medium base socket attached to a deep cone reflector or baffle for optimal visual comfort. 2-piece cylinder allows for easy installation and multiple mounting options. Use with incandescent BR/PAR lamps or with energy efficient long life LED lamps. Features 120V input Medium Base Socket for Incandescent or LED lamp Also available in Surface, Stem or Cable mounted 300W max. 5-Year limited warranty cULus listed for indoor damp location with feed through Socket: Medium Base Socket Wattage: 300W max. Mounting: Cylinder comes with 8' of field cuttable aircraft cable and offset cable (5-wire) for power and dimming Reflector Styles: Available with Baffle or Reflector styles - [NYLI-6S](https://noralighting.com/product/nyli-6s/) - Architectural grade cylinder with medium base socket attached to a deep cone reflector or baffle for optimal visual comfort. 2-piece cylinder allows for easy installation and multiple mounting options. Use with incandescent BR/PAR lamps or with energy efficient long life LED lamps. Features 120V input Medium Base Socket for Incandescent or LED lamp Also available in Surface, Stem or Cable mounted 300W max. 5-Year limited warranty cULus listed for indoor damp location with feed through Socket: Medium Base Socket Wattage: 300W max. Mounting: Cylinder is supplied with hardware to mount directly over junction box. Reflector Styles: Available with Baffle or Reflector styles - [NT-2358/A](https://noralighting.com/product/nt-2358-a/) - Powers track system in between track units in a straight run. Includes two knockouts and can be utilized on hard, grid ceilings, or pendant suspended track. Current Limiter can be used as an on/off switch. Breaker features a "tripped" condition indicator. Why and when to use a Nora Current Limiter? Use Nora's track current limiter in tough watts per square foot. Commercial, residential and NEC calculate the wattage of a line voltage track run by the length of the run, not by the wattage consumed. NEC applies 45 watts per foot regardless of actual load. Example: (3) 39W Fixtures on a 20' run would be calculated at 900W (20' at 45 Watts) With Nora's 1 amp current limiter track feed, this run is now limited to 120 watts. A savings of 780 watts in the watts per square foot. Compatible Track System: Two-Circuit Input Voltage: 120V Current Limiter: 0.5A, 1A, 2.5A, 5A, 7.5A, 10A, 12A, 14A Dimming: Triac or ELV Finish: Black or White - [NT-358/A](https://noralighting.com/product/nt-358-a/) - Powers track system in between track units in a straight run. Includes two knockouts and can be utilized on hard, grid ceilings, or pendant suspended track. Current Limiter can be used as an on/off switch. Breaker features a "tripped" condition indicator. Why and when to use a Nora Current Limiter? Use Nora's track current limiter in tough watts per square foot. Commercial, residential and NEC calculate the wattage of a line voltage track run by the length of the run, not by the wattage consumed. NEC applies 45 watts per foot regardless of actual load. Example: (3) 39W Fixtures on a 20' run would be calculated at 900W (20' at 45 Watts) With Nora's 1 amp current limiter track feed, this run is now limited to 120 watts. A savings of 780 watts in the watts per square foot. Compatible Track System: One-Circuit Input Voltage: 120V Current Limiter: 0.5A, 1A, 2.5A, 5A, 7.5A, 10A, 12A, 14A Dimming: Triac or ELV Finish: Black or White - [NTLE-845](https://noralighting.com/product/ntle-845/) - Track pack comes complete and ready to install with mounting hardware and track heads. Components includes: (1) 4’ single circuit track, (2) end caps, (1) floating canopy feed and (3) 1400lm Aiden LED track heads. The utilitarian style fits almost any design criteria. Adjustability Per Head: 350° horizontal and 90° vertical rotation Finish: Black, Silver, or White Lumens / Wattage Per Head: 1400lm / 14W Color Rendering Index: 90 CRI Beam Spread: Spot and Flood (included) Color Temperature: 3000K Dimming: Triac or ELV - [NX-503-LED](https://noralighting.com/product/nx-503-led/) - Compact, low profile LED exit signs are as brilliant and visible as standard incandescent signs, yet use a fraction of the power. LED light sources require no maintenance for 25 years–saving greatly on maintenance and upkeep costs. Nora Lighting’s LED exits are ideal for commercial and industrial standard non-emergency applications where low maintenance and operating costs are a must. NX-503-LED/G - Green "Exit" Letters, White Housing NX-503-LED/BG - Green "Exit" Letters, Black Housing NX-503-LED/R - Red "Exit" Letters, White Housing NX-503-LED/BR - Red "Exit" Letters, Black Housing BODY 12-1/8" Width x 8-5/8" Height x 1-3/4" Depth Injection-molded thermoplastic housing FACE Single or double face available. Lettered face provided if dual face is preferred. 6" high text with color diffusion Replaceable knockout directional chevrons MOUNTING Wall, side, or ceiling Mounting hardware and canopy included ELECTRICAL 120V/277V Input Total power usage: 2.7 Watts LED light source Isolated surge/short circuit protection Disconnect for deep discharge LIFE EXPECTANCY LED sources and PC circuitry are rated for approximately 25 years with no change in illumination level 5 year warranty on materials and workmanship APPROVALS UL 924 Suitable for damp location NFPA NEC State & Municipal Certified to the energy efficiency standards of California Title 20 ACCESSORIES NEXL-R: Red replacement lens NEG-60: Wet Location Enclosure - [NL-3312](https://noralighting.com/product/nl-3312/) - Precision spun 0.050 aluminum high-grade reflector. The gimbal ring allows the lamp to be mounted on top of the trim and adjustable up to 35°. Lamp: Line Voltage: 50W 120V MR16 GU10(LED or Halogen) Low Voltage: 20W-50W 12V MR16 Finish: Specular Clear Reflector / White Trim, Haze Reflector / White Trim, Specular White Reflector / White Trim - [NELOCAC-8RP](https://noralighting.com/product/nelocac-8rp/) - 8" ELO luminaires are a thin 1/2" surface mounted luminaire. Luminaire is available in 4", 6", 8", 11" or 16" sizes and mounts easily over a standard or fire rated junction boxes. Luminaires can be used to retrofit recessed housings with retrofit kit accessory. Features Dedicated color temperatures (2700K, 3000K, 3500K, 5000K) at 90+ CRI Surface mounted or retrofit over existing recessed housings Available in five sizes (4", 6", 8", 11" or 16") Dimmable with Triac or ELV dimmers cETLus Listed for Damp Location 5-year limited warranty Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Lumens / Wattage: 1100lm / 18W Color Temperature: 2700K, 3000K, 3500K, or 5000K Color Rendering Index: 90+ CRI Finish: White (accepts decorative rings) Retrofit Kit: Each luminaire includes a retrofit kit with medium base socket adapter to mount over 5" or 6" recessed housings Accessories: NLOCAC-8R: 8" Decorative Ring in Black, Brushed Nickel, Chrome or Matte Powder White finish - [NUD-6812](https://noralighting.com/product/nud-6812/) - *** While Supplies Last *** Low-profile linear fixtures provide excellent and even illumination on all surfaces. At only 7 watts per foot, Bravo FROST produces 500 lumens at a crisp sharp 90+ CRI. Each Bravo Frost contains it own driver allowing a 120V feed and longer single runs than low voltage systems. It is one of the most energy efficient products in the market. LED technology eliminates forward heat from the fixture, also no UV or infrared rays to harm artwork or heat sensitive foods. Length: 12-5/6" Input Voltage: 120V Lumens / Wattage: 500lm / 7W per foot Color Temperature: Dedicated CCT (2700K, 3000K, 4000K or 5000K) Finish: Bronze (2700K) or White (3000K, 4000K or 5000K) - [NUD-6818](https://noralighting.com/product/nud-6818/) - *** While Supplies Last *** Low-profile linear fixtures provide excellent and even illumination on all surfaces. At only 7 watts per foot, Bravo FROST produces 500 lumens at a crisp sharp 90+ CRI. Each Bravo Frost contains it own driver allowing a 120V feed and longer single runs than low voltage systems. It is one of the most energy efficient products in the market. LED technology eliminates forward heat from the fixture, also no UV or infrared rays to harm artwork or heat sensitive foods. Length: 18-5/6" Input Voltage: 120V Lumens / Wattage: 500lm / 7W per foot Color Temperature: Dedicated CCT (2700K, 4000K or 5000K) Finish: White - [NUD-6824](https://noralighting.com/product/nud-6824/) - *** While Supplies Last *** Low-profile linear fixtures provide excellent and even illumination on all surfaces. At only 7 watts per foot, Bravo FROST produces 500 lumens at a crisp sharp 90+ CRI. Each Bravo Frost contains it own driver allowing a 120V feed and longer single runs than low voltage systems. It is one of the most energy efficient products in the market. LED technology eliminates forward heat from the fixture, also no UV or infrared rays to harm artwork or heat sensitive foods. Length: 24-1/4" Input Voltage: 120V Lumens / Wattage: 500lm / 7W per foot Color Temperature: Dedicated CCT (2700K, 4000K or 5000K) Finish: White - [NUD-6832](https://noralighting.com/product/nud-6832/) - *** While Supplies Last *** Low-profile linear fixtures provide excellent and even illumination on all surfaces. At only 7 watts per foot, Bravo FROST produces 500 lumens at a crisp sharp 90+ CRI. Each Bravo Frost contains it own driver allowing a 120V feed and longer single runs than low voltage systems. It is one of the most energy efficient products in the market. LED technology eliminates forward heat from the fixture, also no UV or infrared rays to harm artwork or heat sensitive foods. Length: 32-13/16" Input Voltage: 120V Lumens / Wattage: 500lm / 7W per foot Color Temperature: Dedicated CCT (3000K, 4000K or 5000K) Finish: Bronze (3000K) or White (4000K or 5000K) - [NUD-8842](https://noralighting.com/product/nud-8842/) - LEDUR series of 120V dimmable Under Cabinet LED lighting. The LEDUR allows for easy retrofitting of existing Fluorescent, Incandescent, Halogen, or Xenon undercabinet lights. LEDUR's built in LED driver and large knockout plate in the back makes LEDUR easy to install in retrofit or new construction applications. A heavily frosted lens diffuses the LED image and softens the light output. Available in five sizes, two finishes, and warm 2700K, 3000K or cool 4000K. The new LEDUR LED undercabinet is a designers choice for quality, energy efficient LED lighting. Features: • Edge-Lit design eliminate diode image • Excellent color rendition - 90+ CRI • 350+ Lumens and 7 Watts per foot average • 2700K or 3000K • Available in 6 lengths from 8-3/4" to 42" • Low 1" depth by 3-1/2" width • Dark Bronze or White finish • Frosted Lens • Built-in On/Off switch • 120V Dimmable • Linkable up to 400 Watts • 3-Wire grounded electrical port on both ends for power or linking • Can be directly hardwired with Romex™ feed • Each unit includes Romex™ Connector and End-to-End Connector • Includes Stab-In quick connectors • Easy to mount with captive screws • Integral electronic driver • Easy to mount with captive screws • 50,000 hours rated lamp life Included with every LEDUR: (1) 120V LEDUR, (1) End to End Connector [NUA-803], (1) On/Off Rocker switch Voltage: 120V DC Power Consumption: 7W per foot Lumens: 350+ Lumens per foot average Color Rendering Index: 90+ CRI Light Source: Edge-Lit LEDs Life Expectancy: 50,000 hours Maximum Run Length: 400 Watts linked fixtures Color Temperature: 2700K or 3000K Dimensions: Length: 42" Width: 3-1/2" Height: 1" Listing: cULus Listed for Dry location - [NUD-8832](https://noralighting.com/product/nud-8832/) - LEDUR series of 120V dimmable Under Cabinet LED lighting. The LEDUR allows for easy retrofitting of existing Fluorescent, Incandescent, Halogen, or Xenon undercabinet lights. LEDUR's built in LED driver and large knockout plate in the back makes LEDUR easy to install in retrofit or new construction applications. A heavily frosted lens diffuses the LED image and softens the light output. Available in five sizes, two finishes, and warm 2700K, 3000K or cool 4000K. The new LEDUR LED undercabinet is a designers choice for quality, energy efficient LED lighting. Features: • Edge-Lit design eliminate diode image • Excellent color rendition - 90+ CRI • 350+ Lumens and 7 Watts per foot average • 2700K, 3000K (Warm) and 4000K (Cool) color temps • Available in 6 lengths from 8-3/4" to 42" • Low 1" depth by 3-1/2" width • Dark Bronze or White finish • Frosted Lens • Built-in On/Off switch • 120V Dimmable • Linkable up to 400 Watts • 3-Wire grounded electrical port on both ends for power or linking • Can be directly hardwired with Romex™ feed • Each unit includes Romex™ Connector and End-to-End Connector • Includes Stab-In quick connectors • Easy to mount with captive screws • Integral electronic driver • Easy to mount with captive screws • 50,000 hours rated lamp life Included with every LEDUR: (1) 120V LEDUR, (1) End to End Connector [NUA-803], (1) On/Off Rocker switch Voltage: 120V DC Power Consumption: 7W per foot Lumens: 350+ Lumens per foot average Color Rendering Index: 90+ CRI Light Source: Edge-Lit LEDs Life Expectancy: 50,000 hours Maximum Run Length: 400 Watts linked fixtures Color Temperature: Warm White (2700K), White (3000K), Cool White (4000K) Dimensions: Length: 32-3/4" Width: 3-1/2" Height: 1" Listing: cULus Listed for Dry location - [NUD-8822](https://noralighting.com/product/nud-8822/) - LEDUR series of 120V dimmable Under Cabinet LED lighting. The LEDUR allows for easy retrofitting of existing Fluorescent, Incandescent, Halogen, or Xenon undercabinet lights. LEDUR's built in LED driver and large knockout plate in the back makes LEDUR easy to install in retrofit or new construction applications. A heavily frosted lens diffuses the LED image and softens the light output. Available in five sizes, two finishes, and warm 2700K, 3000K or cool 4000K. The new LEDUR LED undercabinet is a designers choice for quality, energy efficient LED lighting. Features: • Edge-Lit design eliminate diode image • Excellent color rendition - 90+ CRI • 350+ Lumens and 7 Watts per foot average • 2700K, 3000K (Warm) and 4000K (Cool) color temps • Available in 6 lengths from 8-3/4" to 42" • Low 1" depth by 3-1/2" width • Dark Bronze or White finish • Frosted Lens • Built-in On/Off switch • 120V Dimmable • Linkable up to 400 Watts • 3-Wire grounded electrical port on both ends for power or linking • Can be directly hardwired with Romex™ feed • Each unit includes Romex™ Connector and End-to-End Connector • Includes Stab-In quick connectors • Easy to mount with captive screws • Integral electronic driver • Easy to mount with captive screws • 50,000 hours rated lamp life Included with every LEDUR: (1) 120V LEDUR, (1) End to End Connector [NUA-803], (1) On/Off Rocker switch Voltage: 120V DC Power Consumption: 7W per foot Lumens: 350+ Lumens per foot average Color Rendering Index: 90+ CRI Light Source: Edge-Lit LEDs Life Expectancy: 50,000 hours Maximum Run Length: 400 Watts linked fixtures Color Temperature: Warm White (2700K), White (3000K), Cool White (4000K) Dimensions: Length: 22-1/4" Width: 3-1/2" Height: 1" Listing: cULus Listed for Dry location - [NUD-8811](https://noralighting.com/product/nud-8811/) - LEDUR series of 120V dimmable Under Cabinet LED lighting is easy to retrofit existing Fluorescent, Incandescent, Halogen, or Xenon undercabinet lights. LEDUR's built in LED driver and large knockout plate in the back makes LEDUR easy to install in retrofit or new construction applications. A heavily frosted lens diffuses the LED image and softens the light output. Available in five sizes, two finishes, and warm 2700K, 3000K or cool 4000K. Features: • Edge-Lit design eliminate diode image • Excellent color rendition - 90+ CRI • 350+ Lumens and 7 Watts per foot average • Available in 6 lengths from 8-3/4" to 42" • Low 1" depth by 3-1/2" width • Frosted Lens • Built-in On/Off switch • 120V Dimmable • Linkable up to 400 Watts • 3-Wire grounded electrical port on both ends for power or linking • Can be directly hardwired with Romex™ feed • Each unit includes Romex™ Connector and End-to-End Connector • Includes Stab-In quick connectors • Easy to mount with captive screws • Integral electronic driver • Easy to mount with captive screws • 50,000 hours rated lamp life Included with every LEDUR: (1) 120V LEDUR, (1) End to End Connector [NUA-803], (1) On/Off Rocker switch Voltage: 120V DC Power Consumption: 7W per foot Lumens: 350+ Lumens per foot average Color Rendering Index: 90+ CRI Light Source: Edge-Lit LEDs Life Expectancy: 50,000 hours Maximum Run Length: 400 Watts linked fixtures Color Temperature: Warm White (2700K), White (3000K), Cool White (4000K) Dimensions: Length: 11-1/4" Width: 3-1/2" Height: 1" Listing: cULus Listed for Dry locations - [NUD-8818](https://noralighting.com/product/nud-8818/) - LEDUR series of 120V dimmable Under Cabinet LED lighting. The LEDUR allows for easy retrofitting of existing Fluorescent, Incandescent, Halogen, or Xenon undercabinet lights. LEDUR's built in LED driver and large knockout plate in the back makes LEDUR easy to install in retrofit or new construction applications. A heavily frosted lens diffuses the LED image and softens the light output. Available in five sizes, two finishes, and warm 2700K, 3000K or cool 4000K. The new LEDUR LED undercabinet is a designers choice for quality, energy efficient LED lighting. Features: • Edge-Lit design eliminate diode image • Excellent color rendition - 90+ CRI • 350+ Lumens and 7 Watts per foot average • 2700K, 3000K (Warm) and 4000K (Cool) color temps • Available in 6 lengths from 8-3/4" to 42" • Low 1" depth by 3-1/2" width • Dark Bronze or White finish • Frosted Lens • Built-in On/Off switch • 120V Dimmable • Linkable up to 400 Watts • 3-Wire grounded electrical port on both ends for power or linking • Can be directly hardwired with Romex™ feed • Each unit includes Romex™ Connector and End-to-End Connector • Includes Stab-In quick connectors • Easy to mount with captive screws • Integral electronic driver • Easy to mount with captive screws • 50,000 hours rated lamp life Included with every LEDUR: (1) 120V LEDUR, (1) End to End Connector [NUA-803], (1) On/Off Rocker switch Voltage: 120V DC Power Consumption: 7W per foot Lumens: 350+ Lumens per foot average Color Rendering Index: 90+ CRI Light Source: Edge-Lit LEDs Life Expectancy: 50,000 hours Maximum Run Length: 400 Watts linked fixtures Color Temperature: Warm White (2700K), White (3000K), Cool White (4000K) Dimensions: Length: 18-1/4" Width: 3-1/2" Height: 1" Listing: cULus Listed for Dry location - [NUD-8808](https://noralighting.com/product/nud-8808/) - LEDUR series of 120V dimmable Under Cabinet LED lighting. The LEDUR allows for easy retrofitting of existing Fluorescent, Incandescent, Halogen, or Xenon undercabinet lights. LEDUR's built in LED driver and large knockout plate in the back makes LEDUR easy to install in retrofit or new construction applications. A heavily frosted lens diffuses the LED image and softens the light output. Available in five sizes, two finishes, and warm 2700K, 3000K or cool 4000K. Features: • Edge-Lit design eliminate diode image • Excellent color rendition - 90+ CRI • 350+ Lumens and 7 Watts per foot average • 2700K, 3000K (Warm) and 4000K (Cool) color temps • Available in 6 lengths from 8-3/4" to 42" • Low 1" depth by 3-1/2" width • Dark Bronze or White finish • Frosted Lens • Built-in On/Off switch • 120V Dimmable • Linkable up to 400 Watts • 3-Wire grounded electrical port on both ends for power or linking • Can be directly hardwired with Romex™ feed • Each unit includes Romex™ Connector and End-to-End Connector • Includes Stab-In quick connectors • Easy to mount with captive screws • Integral electronic driver • Easy to mount with captive screws • 50,000 hours rated lamp life Included with every LEDUR: (1) 120V LEDUR, (1) End to End Connector [NUA-803], (1) On/Off Rocker switch Voltage: 120V DC Power Consumption: 5W per foot Lumens: 350+ Lumens per foot average Color Rendering Index: 90+ CRI Light Source: 7 LEDs Life Expectancy: 50,000 hours Maximum Run Length: 400 Watts linked fixtures Color Temperature: Warm White (3000K), Cool White (4000K) Dimensions: Length: 8-3/4" Width: 3-1/2" Height: 1" Listing: cULus Listed for Dry location Order example: NUD-8808/27BZ: 8" LEDUR LED 120V Under Cabinet Light, 2700K, Bronze finish NUD-8808/27WH: 8" LEDUR LED 120V Under Cabinet Light, 2700K, White finish NUD-8808/30BZ: 8" LEDUR LED 120V Under Cabinet Light, 3000K, Bronze finish NUD-8808/30WH: 8" LEDUR LED 120V Under Cabinet Light, 3000K, White finish NUD-8808/40WH: 8" LEDUR LED 120V Under Cabinet Light, 4000K, White finish - [NHRCB-6](https://noralighting.com/product/nhrcb-6/) - Dedicated remodel housing for use where insulation can be kept 3" away from housing. The housing is dedicated and labeled for use with Cobalt High Lumen Reflectors. Input Voltage: 120V or 277V Wattage: 22W or 30W Dimming: 0-10V Compatible Trims: NLCB-651: 6" Round Open Reflector (2700K only) NLCB2-651: 6" Round Open Reflector NLCB-652: 6" Round Baffle (2700K only) NLCB2-652: 6" Round Baffle NLCB-653: 6" Square Reflector with Round Aperture (2700K only) NLCB2-653: 6" Square Reflector with Round Aperture NLCB-656: 6" Square Reflector with Square Aperture (2700K only) NLCB2-656: 6" Square Reflector with Square Aperture Emergency: Housing can be used with a remote battery (NEPK-07LEDUNV) - [NHCB-6](https://noralighting.com/product/nhcb-6/) - Dedicated new construction housing for use where insulation can be kept 3" away from housing. The housing is dedicated and labeled for use with Cobalt High Lumen Reflectors. Input Voltage: 120-277V Wattage: 22W or 30W Dimming: 0-10V Compatible Trims: NLCB-651: 6" Round Open Reflector (2700K only) NLCB2-651: 6" Round Open Reflector NLCB-652: 6" Round Baffle (2700K only) NLCB2-652: 6" Round Baffle NLCB-653: 6" Square Reflector with Round Aperture (2700K only) NLCB2-653: 6" Square Reflector with Round Aperture NLCB-656: 6" Square Reflector with Square Aperture (2700K only) NLCB2-656: 6" Square Reflector with Square Aperture Emergency: Housing can be specified with an integrated battery with remote test switch - [NHICCB-6](https://noralighting.com/product/nhiccb-6/) - Dedicated IC Airtight new construction housing can be used in direct contact with insulation. The housing is dedicated and labeled for use with Cobalt High Lumen Reflectors. Input Voltage: 120/277V Wattage: 22W or 28W Dimming: Phase (Triac or ELV) or 0-10V Compatible Trims: NLCB2-651: 6" Round Open Reflector NLCB2-652: 6" Round Baffle NLCB2-653: 6" Square Reflector with Round Aperture NLCB2-656: 6" Square Reflector with Square Aperture Emergency: Housing can be pre-wired for use with remote battery (NEPK-07LEDUNV) - [NHRIC-427LMRAT](https://noralighting.com/product/nhric-427lmrat/) - Dedicated remodel housing for use in insulated ceilings can be in direct contact with insulation. Airtight construction provides energy savings by reducing the flow of air through the ceiling. The housing is dedicated and labeled for use with Nora 4" Onyx LED downlights. FEATURES Low 3-1/2″ profile for shallow ceiling plenums IC rated for direct contact with insulation No above-ceiling access required Quick connect provided for electrical connection to the LED Trim Airtight in accordance to ASTM E283 cULus Listed for Damp Locations Dimmable Install in existing sheet rock ceilings up to 0.75″ thick Compatible Luminaires: NOX-431: 4" Onyx Round Reflector NOX-432: 4" Onyx Round Baffle NOXTW-431: 4" Onyx TW Round Reflector NOXAC-431: 4" AC Onyx Round Reflector with Dedicated CCT NOXAC-431TW: 4" AC Onyx Round Reflector with Selectable CCT NOXAC-432: 4" AC Onyx Round Baffle with Dedicated CCT NOXAC-432TW: 4" AC Onyx Round Baffle with Selectable CCT NOXAC-436 4" AC Onyx Square Reflector NPR-4RC: 4" Pearl Round LED Adjustable Cone NPR-4RG: 4" Pearl Round LED Adjustable Gimbal NPR-4SC: 4" Pearl Square LED Adjustable Cone NPR-4SG: 4" Pearl Square LED Adjustable Gimbal - [NSLR-404AT/10](https://noralighting.com/product/nslr-404at-10/) - Line Voltage MR16 GU10 housing provides the crisp reflectance of MR16 light sources while operating on straight line voltage without transformers. GU10 lamps are shielded and feature solid, heavy duty turn-and-lock contacts. Nora’s GU10 fixture is quick to install, operates on standard incandescent dimming controls, and accepts a wide variety of high quality, adjustable finishing trims. Minimum Clearances: Non-IC housings require minimum clearances of 3" from thermal insulation and 1/2" from adjacent building components Installation: High tension tempered steel springs secure remodel housings evenly to ceiling; hole cutout template provided for convenience. Socket: GU10 Twist and Lock Maximum Wattage: 50W - [NS-401QAT](https://noralighting.com/product/ns-401qat/) - 4" Recessed housings deliver ultra-high design quality in any application with minimal apertures ideal for R/PAR20, PAR16 designer light sources. Available in both standard and energy savings airtight configurations, Nora’s 4" products are quick to install and accept a wide variety of high quality, attractive finishing trims. Minimum Clearances: Non-IC housings require minimum clearances of 3" from thermal insulation and 1/2" from adjacent building components Socket Plate: Socket plate adjusts inside housing and can be removed in the field to convert to a floating socket Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be re-positioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Maximum Wattage: 50W (can be labeled for lower wattages) - [NHIC-501QAT](https://noralighting.com/product/nhic-501qat/) - IC Recessed housings are high quality, light weight units ideal for use in insulated ceilings. Air-tight construction reduces energy costs by reducing the amount of air escaping through the ceiling. Rated for direct contact with insulation (except spay foam insulation) and combustive materials, IC housings are easy and quick to install and accept a wide variety of high quality, attractive finishing trims. Minimum Clearances: “IC” Housings are direct contact rated; no minimum clearance is required Floating Socket: Socket is free floating and installs on trim Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be re-positioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Maximum Wattage: 75W (actual wattage varies with trim) - [NHIC-527QAT](https://noralighting.com/product/nhic-527qat/) - Shallow ceiling housings are ideal for locations with 6" joists and tighter ceiling clearances. IC Recessed housings are high quality, light weight units ideal for use in insulated ceilings. Air-tight construction reduces energy costs by reducing the amount of air escaping through the ceiling. Rated for direct contact with insulation (except spay foam insulation) and combustive materials, IC housings are easy and quick to install and accept a wide variety of high quality, attractive finishing trims. Minimum Clearances: “IC” Housings are direct contact rated; no minimum clearance is required Socket Plate: Socket is free floating and installs on trim Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be repositioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Maximum Wattage: 50W (actual wattage varies with trim) - [NHICCP-4LMRAT](https://noralighting.com/product/nhiccp-4lmrat/) - 4" Dedicated Chicago Plenum housings are designed for use with all 4" Nora Lighting LED retrofit luminares. CP housings are high quality, light weight units ideal for use in insulated ceilings. Airtight construction reduces energy costs by reducing the amount of air escaping through the ceiling. Rated for direct contact with insulation (except spay foam insulation) and combustive materials. Compliant with City of Chicago Environmental Air (CCEA) Features Approved for City of Chicago Environmental Air (CCEA) Quick connect provided for electrical connection to the LED Trim cULus Listed for Damp Location (Wet location when used with compatible luminaire) 24-1/2″ bar hangers included with captive nails and alignment foot Compatible Luminaires: NLCBC-469: 4" Cobalt Adjustable Downlight NLCBC2-4: 4" Cobalt Click Downlights NOX-4: 4" Onyx Downlights NOXAC-4: 4" AC Onyx Downlights NOXTW-4: 4" Onyx Tunable White Downlights NIR-4: 4" Iolite Retrofit Downlights NPR-4: 4" Pearl Downlights - [NM1-EXT72](https://noralighting.com/product/nm1-ext72/) - An extension cable is used to extend the length between the luminaire (NM1-170) and a compatible 12V LED driver. Cables can be connected together to create custom lengths. Maximum length between luminaire and driver is 80'. Length: 72" Compatible Luminaires: NM1-170: 12V M1 LED Downlight - [NM1-EXT6](https://noralighting.com/product/nm1-ext6/) - An extension cable is used to extend the length between the luminaire (NM1-170) and a compatible 12V LED driver. Cables can be connected together to create custom lengths. Maximum length between luminaire and driver is 80'. Length: 6" Compatible Luminaires: NM1-170: 12V M1 LED Downlight - [NM1-EXT48](https://noralighting.com/product/nm1-ext48/) - An extension cable is used to extend the length between the luminaire (NM1-170) and a compatible 12V LED driver. Cables can be connected together to create custom lengths. Maximum length between luminaire and driver is 80'. Length: 48" Compatible Luminaires: NM1-170: 12V M1 LED Downlight - [NM1-EXT240](https://noralighting.com/product/nm1-ext240/) - An extension cable is used to extend the length between the luminaire (NM1-170) and a compatible 12V LED driver. Cables can be connected together to create custom lengths. Maximum length between luminaire and driver is 80'. Length: 240" Compatible Luminaires: NM1-170: 12V M1 LED Downlight - [NM1-EXT18](https://noralighting.com/product/nm1-ext18/) - An extension cable is used to extend the length between the luminaire (NM1-170) and a compatible 12V LED driver. Cables can be connected together to create custom lengths. Maximum length between luminaire and driver is 80'. Length: 18" Compatible Luminaires: NM1-170: 12V M1 LED Downlight - [NM1-EXT12](https://noralighting.com/product/nm1-ext12/) - An extension cable is used to extend the length between the luminaire (NM1-170) and a compatible 12V LED driver. Cables can be connected together to create custom lengths. Maximum length between luminaire and driver is 80'. Length: 12" Compatible Luminaires: NM1-170: 12V M1 LED Downlight - [NM1-SSS](https://noralighting.com/product/nm1-sss/) - Square stainless steel, field changeable trim. Requires NM1-170. - [NM1-RSSD](https://noralighting.com/product/nm1-rssd/) - Round indicator stainless steel, field changeable trim. Requires NM1-170. - [NM1-RLOUV](https://noralighting.com/product/nm1-rlouv/) - Round louver stainless steel, field changeable trim. Requires NM1-170. Finishes: Black, Brushed Nickel or White - [NM1-F](https://noralighting.com/product/nm1-f/) - For new construction pre-wiring and easier layout planning. Compatible Luminaires: NM1-170: 12V M1 LED Downlight - [NAPK-524W/12](https://noralighting.com/product/napk-524w-12/) - 12V plug-in driver to be used with Nora Lighting’s 12 Volt systems. Direct connection to a wall outlet. Input Voltage: 120VAC Output Voltage: 12VDC Wattage: 24W Dimming: Non-Dimmable Cord Length: 48" Accessory: NATL-302W: 5" Power Line Splitter Listing: cULus Listed - [NATL-524W](https://noralighting.com/product/natl-524w/) - 24V plug-in driver to be used with Nora Lighting's 24 Volt systems. Direct connection to a wall outlet. Input Voltage: AC 100V-240V Ouput Voltage: 24VDC Wattage: 24W Dimming: Non-Dimmable Cord Length: 6' Accessory: NATL-302W: 5" Power Line Splitter Listing: cULus Listed - [NUA-824](https://noralighting.com/product/nua-824/) - Jumper cable connects two LEDUR fixtures or to a junction box (NUA-802) Length: 24″ Finish: Black or White Compatible Luminaires: NUD-88: 120V LEDUR Under Cabinet with Dedicated CCT NUDTW-88: 120V LEDUR Under Cabinet with Selectable CCT - [NUA-812](https://noralighting.com/product/nua-812/) - Jumper cable connects two LEDUR fixtures or to a junction box (NUA-802) Length: 12″ Finish: Black or White Compatible Luminaires: NUD-88: 120V LEDUR Under Cabinet with Dedicated CCT NUDTW-88: 120V LEDUR Under Cabinet with Selectable CCT - [NUA-806](https://noralighting.com/product/nua-806/) - Jumper cable connects two LEDUR fixtures or to a junction box (NUA-802) Length: 6″ Finish: Black or White Compatible Luminaires: NUD-88: 120V LEDUR Under Cabinet with Dedicated CCT NUDTW-88: 120V LEDUR Under Cabinet with Selectable CCT - [NUA-802](https://noralighting.com/product/nua-802/) - Junction box used to power LED luminaires using a jumper cable or a hardwire power cord. Finish: Black or White Compatible Luminaires: NUD-88: 120V LEDUR Under Cabinet with Dedicated CCT NUDTW-88: 120V LEDUR Under Cabinet with Selectable CCT - [NUA-803](https://noralighting.com/product/nua-803/) - Connects two luminaires seamlessly. (Note: One connector is included with each fixture) Finish: White Compatible Luminaires: NUD-88: 120V LEDUR Under Cabinet with Dedicated CCT NUDTW-88: 120V LEDUR Under Cabinet with Selectable CCT - [NUA-872](https://noralighting.com/product/nua-872/) - Jumper cable connects two LEDUR fixtures or to a junction box (NUA-802) Length: 72″ Finish: Black or White Compatible Luminaires: NUD-88: 120V LEDUR Under Cabinet with Dedicated CCT NUDTW-88: 120V LEDUR Under Cabinet with Selectable CCT - [NUA-804](https://noralighting.com/product/nua-804/) - 72" 3-Wire Power cord used to connect luminaire to NUA-802 or junction box. Finish: Black or White Compatible Luminaires: NUD-88: 120V LEDUR Under Cabinet with Dedicated CCT NUDTW-88: 120V LEDUR Under Cabinet with Selectable CCT - [NUA-805](https://noralighting.com/product/nua-805/) - 72" 3-Wire Cord used to connect the luminaire to an outlet. Finish: Black or White Compatible Luminaires: NUD-88: 120V LEDUR Under Cabinet with Dedicated CCT NUDTW-88: 120V LEDUR Under Cabinet with Selectable CCT - [NULSA-212-90](https://noralighting.com/product/nulsa-212-90/) - 12" Jumper cable with 90˚ connector is used to connect two luminaires or to NULSA-JBOX. Finish: White Compatible Fixtures: NULS: 120V LED Linear - [NULSA-206](https://noralighting.com/product/nulsa-206/) - 6" Jumper cable is used to connect two luminaires or to NULSA-JBOX. Finish: White Compatible Fixtures: NULS: 120V LED Linear - [NULSA-206-90](https://noralighting.com/product/nulsa-206-90/) - 6" Jumper cable with 90˚ connector is used to connect two luminaires or to NULSA-JBOX. Finish: White Compatible Fixtures: NULS: 120V LED Linear - [NULSA-218](https://noralighting.com/product/nulsa-218/) - 18" Jumper cable is used to connect two luminaires or to NULSA-JBOX. Finish: White Compatible Fixtures: NULS: 120V LED Linear - [NULSA-212](https://noralighting.com/product/nulsa-212/) - 12" Jumper cable is used to connect two luminaires or to NULSA-JBOX. Finish: White Compatible Fixtures: NULS: 120V LED Linear - [NULSA-211](https://noralighting.com/product/nulsa-211/) - 8.5" Power cord with On/Off Switch is used to connect luminaire to NULSA-JBOX. Finish: White Compatible Fixtures: NULS: 120V LED Linear - [NULSA-218-90](https://noralighting.com/product/nulsa-218-90/) - 18" Jumper cable with 90˚ connector is used to connect two luminaires or to NULSA-JBOX. Finish: White Compatible Fixtures: NULS: 120V LED Linear - [NULSA-JBOX](https://noralighting.com/product/nulsa-jbox/) - Junction box used to power LED luminaires using a hardwire power cord or jumper cables. Finish: White Compatible Fixtures: NULS: 120V LED Linear - [NULSA-MAGMC](https://noralighting.com/product/nulsa-magmc/) - A pair of magnetic mounting brackets used to mount NULS luminaires on a metal surface. Compatible Fixtures: NULS: 120V LED Linear - [NULSA-MTGKIT](https://noralighting.com/product/nulsa-mtgkit/) - Hardware mounting kit includes (2) mounting brackets, (1) end-to-end connector, and (2) screws. (Note: Hardware mounting kit is included with each fixture) Compatible Fixtures: NULS: 120V LED Linear - [NUA-909](https://noralighting.com/product/nua-909/) - A pair of adjustable mounting brackets used to angle the luminaire on a surface, includes two screws. (Note: Two brackets are included with each fixture) Finish: White Compatible Luminaires: NUDTW-98: 120V Bravo FROST LED Linear with Selectable CCT - [NUA-609](https://noralighting.com/product/nua-609/) - 0º to 90º adjustable mount bracket for Bravo FROST luminaires. Note: Two are included with each luminaire Finish: Bronze Compatible Luminaires: NUD-68: 120V Bravo FROST with Dedicated CCT - [NUA-972W](https://noralighting.com/product/nua-972w/) - A jumper cable is used to connect two luminaires. Length: 72" Compatible Luminaires: NUDTW-98: 120V Bravo FROST LED Linear with Selectable CCT - [NUA-924W](https://noralighting.com/product/nua-924w/) - A jumper cable is used to connect two luminaires. Length: 24" Compatible Luminaires: NUDTW-98: 120V Bravo FROST LED Linear with Selectable CCT - [NUA-912W](https://noralighting.com/product/nua-912w/) - A jumper cable is used to connect two luminaires. Length: 12" Compatible Luminaires: NUDTW-98: 120V Bravo FROST LED Linear with Selectable CCT - [NUA-906W](https://noralighting.com/product/nua-906w/) - A jumper cable is used to connect two luminaires. Length: 6" Compatible Luminaires: NUDTW-98: 120V Bravo FROST LED Linear with Selectable CCT - [NUA-903W](https://noralighting.com/product/nua-903w/) - Connects two luminaires seamlessly. (Note: One connector is included with each fixture) Finish: White Compatible Luminaires: NUDTW-98: 120V Bravo FROST LED Linear with Selectable CCT - [NUA-905W](https://noralighting.com/product/nua-905w/) - 72" 3-Wire Cord used to connect the luminaire to the outlet. Compatible Luminaires: NUDTW-98: 120V Bravo FROST LED Linear with Selectable CCT - [NUA-904W](https://noralighting.com/product/nua-904w/) - 3-Wire connector used to hardwire fixture to NUA-902W (Junction Box). Compatible Products: NUDTW-98: 120V Bravo FROST Tunable White NUA-902W: Junction Box - [NUDTW-9812](https://noralighting.com/product/nudtw-9812/) - Low-profile LED Bravo FROST Tunable White fixtures provide excellent and even illumination on all surfaces. At only 10 watts per foot, Bravo FROST TW produces an incredible 850 lumens per foot at a crisp sharp 90+ CRI. Each Bravo Frost TW contains it own driver allowing a 120V feed and longer single runs than low voltage systems. Each luminaire includes 90° adjustable brackets and integral CCT switch to change the color tempearture (3000K / 3500K / 4000K). Input Voltage: 120V Length: 12" Lumens / Wattage: 850lm / 10W per foot Color Temperature: Field Selectable (3000K / 3500K / 4000K) Finish: White Included with luminaire: (2) 90° Adjustable mounting brackets and (1) End-to-End connector Accessories: NUA-902W: Hardwire Junction Box NUA-904W: 72" Hardwire Connector NUA-905W: 72" Cord and Plug NUA-903W: End-to-End Connector (included with luminaire) NUA-906W: 6" Jumper Cable NUA-912W: 12" Jumper Cable NUA-924W: 24" Jumper Cable NUA-972W: 72" Jumper Cable NUA-909W: 90° Adjustable Mounting Brackets (included with luminaire) - [NUDTW-9816](https://noralighting.com/product/nudtw-9816/) - Low-profile LED Bravo FROST Tunable White fixtures provide excellent and even illumination on all surfaces. At only 10 watts per foot, Bravo FROST TW produces an incredible 850 lumens per foot at a crisp sharp 90+ CRI. Each Bravo Frost TW contains it own driver allowing a 120V feed and longer single runs than low voltage systems. Each luminaire includes 90° adjustable brackets and integral CCT switch to change the color tempearture (3000K / 3500K / 4000K). Input Voltage: 120V Length: 16" Lumens / Wattage: 850lm / 10W per foot Color Temperature: Field Selectable (3000K / 3500K / 4000K) Finish: White Included with luminaire: (2) 90° Adjustable mounting brackets and (1) End-to-End connector Accessories: NUA-902W: Hardwire Junction Box NUA-904W: 72" Hardwire Connector NUA-905W: 72" Cord and Plug NUA-903W: End-to-End Connector (included with luminaire) NUA-906W: 6" Jumper Cable NUA-912W: 12" Jumper Cable NUA-924W: 24" Jumper Cable NUA-972W: 72" Jumper Cable NUA-909W: 90° Adjustable Mounting Brackets (included with luminaire) - [NUDTW-9824](https://noralighting.com/product/nudtw-9824/) - Low-profile LED Bravo FROST Tunable White fixtures provide excellent and even illumination on all surfaces. At only 10 watts per foot, Bravo FROST TW produces an incredible 850 lumens per foot at a crisp sharp 90+ CRI. Each Bravo Frost TW contains it own driver allowing a 120V feed and longer single runs than low voltage systems. Each luminaire includes 90° adjustable brackets and integral CCT switch to change the color tempearture (3000K / 3500K / 4000K). Input Voltage: 120V Length: 24" Lumens / Wattage: 850lm / 10W per foot Color Temperature: Field Selectable (3000K / 3500K / 4000K) Finish: White Included with luminaire: (2) 90° Adjustable mounting brackets and (1) End-to-End connector Accessories: NUA-902W: Hardwire Junction Box NUA-904W: 72" Hardwire Connector NUA-905W: 72" Cord and Plug NUA-903W: End-to-End Connector (included with luminaire) NUA-906W: 6" Jumper Cable NUA-912W: 12" Jumper Cable NUA-924W: 24" Jumper Cable NUA-972W: 72" Jumper Cable NUA-909W: 90° Adjustable Mounting Brackets (included with luminaire) - [NUDTW-9832](https://noralighting.com/product/nudtw-9832/) - Low-profile LED Bravo FROST Tunable White fixtures provide excellent and even illumination on all surfaces. At only 10 watts per foot, Bravo FROST TW produces an incredible 850 lumens per foot at a crisp sharp 90+ CRI. Each Bravo Frost TW contains it own driver allowing a 120V feed and longer single runs than low voltage systems. Each luminaire includes 90° adjustable brackets and integral CCT switch to change the color tempearture (3000K / 3500K / 4000K). Input Voltage: 120V Length: 32" Lumens / Wattage: 850lm / 10W per foot Color Temperature: Field Selectable (3000K / 3500K / 4000K) Finish: White Included with luminaire: (2) 90° Adjustable mounting brackets and (1) End-to-End connector Accessories: NUA-902W: Hardwire Junction Box NUA-904W: 72" Hardwire Connector NUA-905W: 72" Cord and Plug NUA-903W: End-to-End Connector (included with luminaire) NUA-906W: 6" Jumper Cable NUA-912W: 12" Jumper Cable NUA-924W: 24" Jumper Cable NUA-972W: 72" Jumper Cable NUA-909W: 90° Adjustable Mounting Brackets (included with luminaire) - [NUA-606](https://noralighting.com/product/nua-606/) - Jumper cable connects two Bravo FROST fixtures or to a junction box (NUA-602) Length: 6" Finish: White Compatible Luminaires: NUD-68: 120V Bravo FROST with Dedicated CCT - [NUA-672](https://noralighting.com/product/nua-672/) - Jumper cable connects two Bravo FROST fixtures or to a junction box (NUA-602) Length: 72" Finish: Black or White Compatible Luminaires: NUD-68: 120V Bravo FROST with Dedicated CCT - [NUA-624](https://noralighting.com/product/nua-624/) - Jumper cable connects two Bravo FROST fixtures or to a junction box (NUA-602) Length: 24" Finish: Black or White Compatible Luminaires: NUD-68: 120V Bravo FROST with Dedicated CCT - [NUA-612](https://noralighting.com/product/nua-612/) - Jumper cable connects two Bravo FROST fixtures or to a junction box (NUA-602) Length: 12" Finish: Black or White Compatible Luminaires: NUD-68: 120V Bravo FROST with Dedicated CCT - [NUA-602](https://noralighting.com/product/nua-602/) - A junction box with an on/off switch is used to power LED luminaires using a jumper cable or a hardwire power cord. Finish: Bronze or White Compatible Luminaires: NUD-68: 120V Bravo FROST with Dedicated CCT - [NUA-603](https://noralighting.com/product/nua-603/) - Connects two luminaires seamlessly. (Note: One connector is included with each fixture) Finish: Bronze Compatible Luminaires: NUD-68: 120V Bravo FROST with Dedicated CCT - [NUA-605](https://noralighting.com/product/nua-605/) - 72" 2-Wire Power cord used to connect luminaire to outlet. Finish: Black or White Compatible Luminaires: NUD-68: 120V Bravo FROST with Dedicated CCT - [NUA-604](https://noralighting.com/product/nua-604/) - 72" 2-Wire Power cord used to connect luminaire to NUA-602 or junction box. Finish: Black or White Compatible Luminaires: NUD-68: 120V Bravo FROST with Dedicated CCT - [NHR-26Q](https://noralighting.com/product/nhr-26q/) - Universal remodel housing is the base standard for incandescent recessed fixtures. The remodel housing installs into existing drywall or wood ceilings with no above access required. Designed for non-IC applications, it offers the widest range and variety of high quality, attractive finishing trims for lamps ranging from simple A-Type to larger PAR sources. Minimum Clearances: Non-IC housings require minimum clearances of 3" from thermal insulation and 1/2" from adjacent building components Socket Plate: Socket plate adjusts inside housing and can be removed in the field to convert to a floating socket Installation: High tension tempered steel springs secure remodel housings evenly to ceiling; hole cutout template provided for convenience. Maximum Wattage: 150W (actual wattage varies with trim) - [NOX-56OR-W](https://noralighting.com/product/nox-56or-w/) - An oversize ring used to cover large ceiling cut-outs up to 8-1/8" when using compatible 5"/6" Onyx reflectors Finish: White Compatible Luminaires: NOX-5631: 5"/6" Onyx Reflector NOX-5632: 5"/6" Onyx Baffle NOX-5634: 5"/6" Onyx Adjustable NOXAC-5631: 5"/6" AC Onyx Reflector NOXAC-5632: 5"/6" AC Onyx Baffle NOXTW-5631: 5"/6" Onyx TW Reflector NOXTW-5632: 5"/6" Onyx TW Baffle - [NOX-56EYELID](https://noralighting.com/product/nox-56eyelid/) - An eyelid is used to convert 5"/6" Onyx round reflectors or baffles to half-moon wall wash trim. Finish: White Compatible Luminaires: NOX-5631: 5"/6" Onyx Reflector NOX-5632: 5"/6" Onyx Baffle NOXAC-5631: 5"/6" AC Onyx Reflector NOXAC-5632: 5"/6" AC Onyx Baffle NOXTW-5631: 5"/6" Onyx TW Reflector NOXTW-5632: 5"/6" Onyx TW Baffle - [NOX-56BAF](https://noralighting.com/product/nox-56baf/) - Baffle insert used to convert a 5"/6" AC Onyx Reflector to a baffle. The baffle insert does not change the white flange. Finish: White or Black Compatible Luminaire: NOXAC-5631: 5"/6" AC Onyx Reflector - [NOX-56REFL](https://noralighting.com/product/nox-56refl/) - Reflector insert used to convert a 5"/6" AC Onyx Reflector to a different finish. The reflector insert does not change the white flange. Finish: Clear Diffused, Haze, or Black Compatible Luminaire: NOXAC-5631: 5"/6" AC Onyx Reflector with Dedicated CCT - [NOXAC-636](https://noralighting.com/product/noxac-636/) - AC Onyx retrofit series requires no driver for a sleek design. Square reflectors are suitable for use with most 6" recessed housings. Die-cast aluminum construction provides clean sharp edges. Deep regressed optics and round aperture delivers even and glare-free illumination. FEATURES AC input (no driver needed) Dedicated CCT options Includes medium base socket adapter for easy retrofitting in 6" recessed housings Quick connector is compatible with dedicated LED housings. Required by some codes in recessed can applications or to meet energy rebate program requirements Lumens / Wattage: 1100lm / 17W Color Temperature: Dedicated CCT (2700K, 3000K or 4000K) Finish: White Reflector / White Flange Dimming: Triac or ELV - [NOXAC-56RGTW](https://noralighting.com/product/noxac-56rgtw/) - 5"/6" AC Onyx adjustable LED retrofit downlights requires no driver and allow for a sleek design. Spun aluminum construction provides clean sharp edges and is suitable for use with most 5" or 6" recessed housings. Features: 40° Tilt / 180° Rotation Dimmable AC LED Includes medium base socket adapter for easy retrofitting in 5" or 6" recessed housings Quick connector is compatible with dedicated LED housings. Required by some codes in recessed can applications or to meet energy rebate program requirements Lumens / Wattage: 1050lm / 14.5W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Finish: White Dimming: Triac or ELV Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch ? - [NOXAC-5632](https://noralighting.com/product/noxac-5632/) - AC Onyx 5”/6” Retrofit Series requires no driver and allow for a sleek design. Spun aluminum construction provides clean sharp edges and is suitable for use with most 5” and 6” recessed housings. Deep regressed optics and round aperture deliver even and glare-free illumination. Features: Recessed mount into 5"/6" housing. Includes medium base socket adapter for easy retrofitting in 5"/6" recessed housings. Quick connector is compatible with dedicated LED housings. Required by some codes in recessed can applications or to meet energy rebate program requirements. Lumens / Wattage: 850lm / 12.5W or 1150lm / 15.5W Color Temperature: Dedicated CCT (2700K, 3000K, 3500K, 4000K or 5000K) Dimming: Triac or ELV Accessories: NOX-56EYELID: 5"/6" Round Eyelid for Onyx NOX-56OR-W: 5"/6" Round Oversize Ring for Onyx - [NOX-4OR-W](https://noralighting.com/product/nox-4or-w/) - An oversize ring used to cover large ceiling cut-outs up to 5-7/8" when using compatible 4" Onyx reflectors Finish: White Compatible Luminaires: NOX-431: 4" Onyx Reflector NOX-432: 4" Onyx Baffle NOX-434: 4" Onyx Adjustable NOXAC-431: 4" AC Onyx Reflector NOXAC-432: 4" AC Onyx Baffle NOXTW-431: 4" Onyx TW Reflector - [NOX-4EYELID](https://noralighting.com/product/nox-4eyelidw/) - An eyelid is used to convert 4" Onyx round reflectors or baffles to half-moon wall wash trim. Finish: White Compatible Luminaires: NOX-431: 4" Onyx Reflector NOX-432: 4" Onyx Baffle NOXAC-431: 4" AC Onyx Reflector NOXAC-432: 4" AC Onyx Baffle NOXTW-431: 4" Onyx TW Reflector - [NOX-4BAF](https://noralighting.com/product/nox-4baf/) - A baffle insert converts a 4" Onyx Reflector with Dedicated CCT to a baffled trim. It does not change the white flange. Finish: White or Black Compatible Luminaires: NOXAC-431: 4" AC Onyx Reflector with Dedicated CCT (not compatible with Selectable CCT) NOXTW-431: 4" Onyx TW Reflector - [NOX-4REFL](https://noralighting.com/product/nox-4refl/) - A reflector insert converts a 4" Onyx Reflector with Dedicated CCT to a different finish. It does not change the white flange. Finish: Clear Diffused, Haze or Black Compatible Luminaires: NOXAC-431: 4" AC Onyx Reflector with Dedicated CCT (not compatible with Selectable CCT) NOXTW-431: 4" Onyx TW Reflector - [NOXAC-4SWTW](https://noralighting.com/product/noxac-4swtw/) - 4" AC Onyx wall wash LED retrofit downlights requires no driver and allow for a sleek design. Square trims are compatible for use with most 4" recessed housings. Die-cast aluminum construction provides clean sharp edges. Features: Dimmable AC LED Includes medium base socket adapter for easy retrofitting in 4" recessed housings Quick connector is compatible with dedicated LED housings. Required by some codes in recessed can applications or to meet energy rebate program requirements Lumens / Wattage: 700lm / 11W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Finish: White Dimming: Triac or ELV Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch - [NOXAC-4RWTW](https://noralighting.com/product/noxac-4rwtw/) - 4" AC Onyx wall wash LED retrofit downlights requires no driver and allow for a sleek design. Compatible for use with most 4" recessed housings. Die-cast aluminum construction provides clean sharp edges. Features: Dimmable AC LED Includes medium base socket adapter for easy retrofitting in 4" recessed housings Quick connector is compatible with dedicated LED housings. Required by some codes in recessed can applications or to meet energy rebate program requirements Lumens / Wattage: 800lm / 11W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Finish: White Dimming: Triac or ELV Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch - [NOXAC-4RGTW](https://noralighting.com/product/noxac-4rgtw/) - 4" AC Onyx adjustable LED retrofit downlights requires no driver and allow for a sleek design. Spun aluminum construction provides clean sharp edges and is suitable for use with most 4" recessed housings. Features: 15° Tilt / 360° Rotation Dimmable AC LED Includes medium base socket adapter for easy retrofitting in 4" recessed housings Quick connector is compatible with dedicated LED housings. Required by some codes in recessed can applications or to meet energy rebate program requirements Lumens / Wattage: 800lm / 11W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Finish: White Dimming: Triac or ELV Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch ? - [NOXAC-436](https://noralighting.com/product/noxac-436/) - AC Onyx retrofit series requires no driver for a sleek design. Square reflectors are suitable for use with most 4" recessed housings. Die-cast aluminum construction provides clean sharp edges. Deep regressed optics and round aperture delivers even and glare-free illumination. Features: AC input (no driver needed) Dedicated CCT options Includes medium base socket adapter for easy retrofitting in 4" recessed housings Quick connector is compatible with dedicated LED housings. Required by some codes in recessed can applications or to meet energy rebate program requirements Lumens / Wattage: 1000lm / 14.5W Color Temperature: Dedicated CCT (2700K, 3000K, or 4000K) Finish: White Reflector / White Flange Dimming: Triac or ELV - [NOXLV-4R1TW](https://noralighting.com/product/noxlv-4r1tw/) - 4" Onyx Low Voltage Retrofit luminaires are perfect solution to convert low voltage recessed housings into LED luminaire. Each fixture include an integral tunable CCT switch to change the color temperature appearance. Spun aluminum construction provides clean sharp edges and is suitable for use with most 4" low voltage housings. Deep regressed optics and round aperture deliver even and glare-free illumination. Features: Includes GU5.3 socket adapter for easy retrofitting in 4" low voltage recessed housings Five color temperatures in each fixture Integral dimmable driver Compatible with magnetic and electronic transformers Lumens / Wattage: 800lm / 11W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Finish: White Reflector / White Flange Dimming: Triac or ELV - [NOXLV-4R2TW](https://noralighting.com/product/noxlv-4r2tw/) - 4" Onyx Low Voltage Retrofit luminaires are perfect solution to convert low voltage recessed housings into LED luminaire. Each fixture include an integral tunable CCT switch to change the color temperature appearance. Spun aluminum construction provides clean sharp edges and is suitable for use with most 4" low voltage housings. Deep regressed optics and round aperture deliver even and glare-free illumination. Features: Includes GU5.3 socket adapter for easy retrofitting in 4" low voltage recessed housings Five color temperatures in each fixture Integral dimmable driver Compatible with magnetic and electronic transformers Lumens / Wattage: 800lm / 11W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Finish: White Baffle / White Flange Dimming: Triac or ELV - [NOXAC-432](https://noralighting.com/product/noxac-432/) - 4” AC Onyx Retrofit Series requires no driver and allow for a sleek design. Spun aluminum construction provides clean sharp edges and is suitable for use with most 4” recessed housings. Deep regressed optics and round aperture deliver even and glare-free illumination. Features: Includes medium base socket adapter for easy retrofitting in 4" recessed housings Quick connector is compatible with dedicated LED housings. Required by some codes in recessed can applications or to meet energy rebate program requirements Lumens / Wattage: 700lm / 10.5W or 1000lm / 15W Color Temperature: Dedicated CCT (2700K, 3000K, 3500K, 4000K or 5000K) Note: For selectable color temperature, see NOXAC-432TW Finish: White Baffle / White Flange Dimming: Triac or ELV Accessories: NOX-4EYELID: 4" Round Eyelid for Onyx NOX-4OR-W: 4" Round Oversize Ring for Onyx NRA-212SM: GU24 Socket Adapter - [NOXAC-431](https://noralighting.com/product/noxac-431/) - 4” AC Onyx Retrofit Series requires no driver and allows for a sleek design. Spun aluminum construction provides clean sharp edges and is suitable for use with most 4” recessed housings. Deep-regressed optics and round aperture deliver even and glare-free illumination. Features: Includes medium base socket adapter for easy retrofitting in 4" recessed housings Quick connector is compatible with dedicated LED housings. Required by some codes in recessed can applications or to meet energy rebate program requirements Lumens / Wattage: 700lm / 10.5W or 1000lm / 15W Color Temperature: Dedicated CCT (2700K, 3000K, 3500K, 4000K or 5000K) Note: For selectable color temperature, see NOXTW-431 Finish: White Reflector / White Flange Note: Reflector accepts baffle or reflector inserts for additional appearances Dimming: Triac or ELV Accessories: NOX-4EYELID: 4" Round Eyelid for Onyx NOX-4OR-W: 4" Round Oversize Ring for Onyx NOX-4REFL: 4" Reflector Insert for Onyx NOX-4BAF: 4" Baffle Insert for Onyx NRA-212SM: GU24 Socket Adapter - [NOXTW-5632](https://noralighting.com/product/noxtw-5632/) - ** While Supplies Last, replacement items: NOXAC-5632 or NOXAC-5632TW ** Onyx 5"/6" Tunable White Retrofit Series include an integral tunable CCT switch. Spun aluminum construction provides clean sharp edges and is suitable for use with most 5" and 6" recessed housings. Deep regressed optics and round aperture deliver even and glare-free illumination. Features: Selectable (2700K, 3000K, 3500K, 4000K or 5000K @ 90+ CRI) Integral dimmable driver Recessed mount into 5"/6" housing. Includes medium base socket adapter for easy retrofitting in 5"/6" recessed housings. Quick connector is compatible with dedicated LED housings. Required by some codes in recessed can applications or to meet energy rebate program requirements. Lumens / Wattage: Up to 1100lm / 15.5W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Note: For dedicated color temperature, see NOXAC-5632 Finish: White Baffle / White Flange Dimming: Triac or ELV Accessories: NOX-56EYELID: 5"/6" Round Eyelid for Onyx NOX-56OR-W: 5"/6" Round Oversize Ring for Onyx NRA-212SM: GU24 Socket Adapter - [NOXTW-431](https://noralighting.com/product/noxtw-431/) - Onyx 4” Tunable White Retrofit Series include an integral tunable CCT switch. Spun aluminum construction provides clean sharp edges and is suitable for use with most 4” recessed housings. Deep regressed optics and round aperture deliver even and glare-free illumination. Features: Selectable (2700K, 3000K, 3500K, 4000K or 5000K @ 90+ CRI) Integral dimmable driver Includes medium base socket adapter for easy retrofitting in 4" recessed housings Quick connector is compatible with dedicated LED housings. Required by some codes in recessed can applications or to meet energy rebate program requirements Accepts baffle or reflector insert accessories Lumens / Wattage: Up to 850lm / 10.5W Color Temperature: Selectable CCT (2700K / 3000K / 3500K / 4000K / 5000K) Note: For dedicated color temperature, see NOXAC-431 Finishes: White Reflector / White Flange Note: Reflector accepts baffle or reflector inserts for additional appearances Dimming: Triac or ELV Accessories: NOX-4EYELID: 4" Round Eyelid for Onyx NOX-4OR-W: 4" Round Oversize Ring for Onyx NOX-4REFL: 4" Reflector Insert for Onyx NOX-4BAF: 4" Baffle Insert for Onyx NRA-212SM: GU24 Socket Adapter - [NHIC-527LMRAT](https://noralighting.com/product/nhic-527lmrat/) - 5" Shallow IC Air-Tight Dedicated New Construction housings are designed for use with all 5" Nora Lighting LED retrofit luminares. IC housings are high quality, light weight units ideal for use in insulated ceilings. Airtight construction reduces energy costs by reducing the amount of air escaping through the ceiling. Rated for direct contact with insulation (except spay foam insulation) and combustive materials, Nora IC housings are easy and quick to install. Features Low 5-7/8″ profile shallow housing IC rated for direct contact with insulation Quick connect provided for electrical connection to the LED Trim Airtight in accordance to ASTM E283 cULus Listed for Damp Location (Wet location when used with compatible luminaire) Dimmable 24-1/2″ bar hangers included with captive nails and alignment foot Compatible Luminaires: NLCBC-569: 5″ Cobalt Adjustable Downlight NLCBC2-5: 5″ Cobalt Click Downlights NOX-56: 5″/6″ Onyx Downlights NOXAC-56: 5″/6″ AC Onyx Downlights NOXTW-56: 5″/6″ Onyx Tunable White Downlights NPR-56: 5″/6″ Pearl Downlights - [NX-603D-LED](https://noralighting.com/product/nx-603d-led/) - A compact exit sign with dual color LEDs, allows end user to change the color from Red to Green in the field. The exit sign includes a maintenance-free NiCad battery to power the fixture during power loss for 90 minutes on a full charge. LED light sources require no maintenance for 25 years–saving greatly on maintenance and upkeep costs. LED exits are ideal for commercial and industrial standard non-emergency applications where low maintenance and operating costs are a must. LED Source: Internal switch changes the color of LEDs from Green to Red Colored Filters: Green and Red Filters are included with each sign Face: Double Face and Blank Face included Mounting: Wall, Side, or Ceiling Mounted. Mounting hardware and canopy included Input Voltage: 120V/277V input Battery: 3.6V 300mAh NiCad (nickel-cadmium) Testing: The manual test switch and indicator light are located on the bottom of the sign Accessories: NEG-60 (Wet Location Enclosure for Wall Mounting only) Listings: UL Listed for Damp Locations NFPA Certified to the energy efficiency standards of California Title 20 - [NX-606-LED](https://noralighting.com/product/nx-606-led/) - Die-cast aluminum low-profile LED exit signs are as brilliant and visible as standard incandescent signs, yet use a fraction of the power. LED light sources require no maintenance for 25 years–saving greatly on maintenance and upkeep costs. Exit signs are ideal for commercial and industrial standard non-emergency applications where low maintenance and operating costs are a must. Die-cast exit sign utilizing Light Emitting Diode (LED) modules as the primary light source for economy operation. Exit sign includes a backup NiCad battery for 90-minute operation under emergency applications where the primary power source has been interrupted or terminated. Electrical Voltage: 120/277VAC dual input Wattage: 2.3W Light Source: LED Circuitry Protection: Short circuit protection. Brown-out protection. Construction: Brushed, die-cast aluminum, low-profile, snap-together housing constructed of 20-gauge steel. Snap-out knockouts for wiring. Face: Two front faces sent with the dual face unit, one face plate sent with the single face unit. 6″ high text with color diffusion. Mounting: Exit sign can be mounted on a wall, side, or ceiling (all mounting hardware included). Battery: Replaceable NiCad battery offers 90-minute emergency operation on a fully charged battery. Testing: High-charge / ready operation indicator light and test button. Labels and Listings 5-Year Limited Warranty UL Listed NFPA NEC Certified to the energy efficiency standards of California Title 20 - [NX-616-LED](https://noralighting.com/product/nx-616-led/) - For architectural applications, Nora Lighting offers its low profile, die-cast aluminum LED exit sign with battery backup. Both die-cast faces are brushed to give a simple, yet elegant, effect. In the event of power loss, the LED light sources will remain illuminated at their full light level for 90 minutes. Self Diagnostic feature automatically tests to ensure proper operation. Input Voltage: 120V or 277V Wattage: 2.5W Circuitry Protection: Short circuit protection. Brown-out protection. Letters: 6" Height with Red or Green Letters Face(s): Single or Double APPROVALS UL Listed NFPA / NFPA-101 NEC Suitable for damp location Certified to the energy efficiency standards of California Title 20 - [NX-815-LED](https://noralighting.com/product/nx-815-led/) - Ideal for architectural applications where aesthetic and minimal profile appearance is desired. LED sources within the adjustable housing cast a brilliant red or green illumination on letters embedded inside the acrylic face. BODY 12" Width X 8-1/4" Height X 4" Depth Extruded aluminum housing, acrylic panel, and die-cast cover plate HOUSING Galvanized steel construction FACE Single or double face. Acrylic face has rounded and finished edge for attractive appearance. Red or green 6" lettering inside face. Stick-on chevrons included. MOUNTING 24-1/2" Bar Hangers included ELECTRICAL Voltage: 120V or 277V dual input Power Consumption: 3 watts normal / 5 watts emergency operation Light Source: Long life LED sources Testing: High-charge/ready operation indicator light with test button Circuitry Protection: Short circuit and brown-out protection (Disconnect for deep discharge) Life Expectancy: 25 Years with no change in illumination BATTERY Replaceable 90-minute Ni-Cad battery included LABELS AND LISTINGS UL Listed NEC NFPA State & Municipal Certified to the energy efficiency standards of California Title 20 ACCESSORIES NEXC-R: Red stick-on chevron NEXC-G: Green stick-on chevron - [NX-814-LED](https://noralighting.com/product/nx-814-led/) - Ideal for architectural applications where aesthetic and minimal profile appearance is desired. LED sources within the adjustable housing cast a brilliant red or green illumination on letters embedded inside the acrylic face. BODY 12" Width X 8-1/4" Height X 4" Depth Extruded aluminum housing, acrylic panel, and die-cast cover plate HOUSING Galvanized steel construction FACE Single or double face. Acrylic face has rounded and finished edge for attractive appearance. Red or green 6" lettering inside face. Stick-on chevrons included. MOUNTING 24-1/2" Bar Hangers included ELECTRICAL Voltage: 120V or 277V dual input Power Consumption: 3 watts normal / 5 watts emergency operation Light Source: Long life LED sources Testing: High-charge/ready operation indicator light with test button Circuitry Protection: Short circuit and brown-out protection (Disconnect for deep discharge) Life Expectancy: 25 Years with no change in illumination EMERGENCY CIRCUIT 2nd Circuit for input for external EPS or other alternative emergency power source or generator LABELS AND LISTINGS UL Listed NEC NFPA State & Municipal Certified to the energy efficiency standards of California Title 20 ACCESSORIES NEXC-R - Red stick-on chevron NEXC-G - Green stick-on chevron - [NX-813-LED](https://noralighting.com/product/nx-813-led/) - Ideal for architectural applications where aesthetic and minimal profile appearance is desired. LED sources within the adjustable housing cast a brilliant red or green illumination on letters embedded inside the acrylic face. BODY 12" Width X 8-1/4" Height X 4" Depth Extruded aluminum housing, acrylic panel, and die-cast cover plate HOUSING Galvanized steel construction FACE Single or double face. Acrylic face has rounded and finished edge for attractive appearance. Red or green 6" lettering inside face. Stick-on chevrons included. MOUNTING 24-1/2" Bar Hangers included ELECTRICAL Voltage: 120V or 277V dual input Power Consumption: 3 watts normal / 5 watts emergency operation Light Source: Long life LED sources Testing: High-charge/ready operation indicator light with test button Circuitry Protection: Short circuit and brown-out protection (Disconnect for deep discharge) Life Expectancy: 25 Years with no change in illumination LABELS AND LISTINGS UL Listed NEC NFPA State & Municipal Certified to the energy efficiency standards of California Title 20 ACCESSORIES NEXC-R - Red stick-on chevron NEXC-G - Green stick-on chevron - [NX-812-LED](https://noralighting.com/product/nx-812-led/) - Ideal for architectural applications where aesthetic and minimal profile appearance is desired. LED sources within the adjustable housing cast a brilliant red or green illumination on letters embedded inside the acrylic face. BODY 12" Width X 10-5/8" Height X 1-5/8" Depth Extruded aluminum housing and acrylic panel HOUSING 2-piece snap-together aluminum extrusion holding battery, LED source, PC board, and top of acrylic face. Housing adjusts to any angle up to 90 degrees. FACE Single or double face. Acrylic face has rounded and finished edge for attractive appearance. Red or green 6" lettering inside face. Stick-on chevrons included. MOUNTING Universal mount to wall, ceiling or side Mounting hardware included ELECTRICAL Voltage: 120V or 277V dual input Power Consumption: 3 watts normal / 5 watts emergency operation Light Source: Long life LED sources Testing: High-charge/ready operation indicator light with test button Circuitry Protection: Short circuit and brown-out protection (Disconnect for deep discharge) Life Expectancy: 25 Years with no change in illumination BATTERY Replaceable 90-minute Ni-Cad battery included LABELS AND LISTINGS UL Listed NEC NFPA State & Municipal Certified to the energy efficiency standards of California Title 20 ACCESSORIES NEXC-R: Red stick-on chevron NEXC-G: Green stick-on chevron - [NX-811-LED](https://noralighting.com/product/nx-811-led/) - Ideal for architectural applications where aesthetic and minimal profile appearance is desired. LED sources within the adjustable housing cast a brilliant red or green illumination on letters embedded inside the acrylic face. A 90-minute battery is included for emergency operation. BODY 12" Width X 10-5/8" Height X 1-5/8" Depth Extruded aluminum housing and acrylic panel HOUSING 2-piece snap-together aluminum extrusion holding battery, LED source, PC board, and top of acrylic face. Housing adjusts to any angle up to 90 degrees. FACE Single or double face. Acrylic face has rounded and finished edge for attractive appearance. Red or green 6" lettering inside face. Stick-on chevrons included. MOUNTING Universal mount to wall, ceiling or side Mounting hardware included ELECTRICAL Voltage: 120V or 277V dual input Power Consumption: 3 watts normal / 5 watts emergency operation Light Source: Long life LED sources Testing: High-charge/ready operation indicator light with test button Circuitry Protection: Short circuit and brown-out protection (Disconnect for deep discharge) Life Expectancy: 25 Years with no change in illumination EMERGENCY CIRCUIT 2nd Circuit for input for external EPS or other alternative emergency power source or generator LABELS AND LISTINGS UL Listed NEC NFPA State & Municipal Certified to the energy efficiency standards of California Title 20 ACCESSORIES NEXC-R - Red stick-on chevron NEXC-G - Green stick-on chevron - [NE-612LED](https://noralighting.com/product/ne-612led/) - Luminaire provides 90 minutes of light from two adjustable heads for illuminating paths of egress upon failure of normal power. Emergency unit is available in higher lumen output and remote capability. FEATURES Compact housing with (2) adjustable LEDs Lightweight snap together design Plastic enclosure with 5VA flame retardant 3.6V maintenance-free, rechargeable NiMH battery Self-diagnostic and self-testing option available Ceiling or wall mounted Universal 120-277V input Remote capable must specify CONSTRUCTION Injection-molded thermoplastic ABS housing. Plastic enclosure with 5VA flame retardant. Quick connector design for easy installation. Two fully adjustable glare-free round heads for emergency lighting. MOUNTING Plastic enclosure includes a top and side knockout for conduit application. Suitable for wall mounting or ceiling mounting. Waterproof and Vandal Resistant Enclosure available (NEG-602) REPLACEMENT BATTERY NEB-NiCAD8: Replacement battery for NE-612LED NEB-NiCAD9: Two replacement batteries for NE-612LED with Remote (RC) LABELS AND LISTINGS 5 year limited warranty NFPA - [NEX-730-LED](https://noralighting.com/product/nex-730-led/) - LED Exit sign with dual emergency fixtures feature Ball and Socket LED lights for full adjustability. The exit sign is powered by LED source for maximum life without maintenance; Expected life 100,000 hours. In the event of power loss, both sign and heads will operate for a minimum of 90 minutes. FEATURES • Fully adjustable 2.8 watt high-intensity LED head • Universal mounting - Wall or ceiling • UL listed and meets or exceeds UL924, NEC, OSHA and NFPA 101 Life Safety Code requirements • Injection molded high impact and scratch resistant corrosion-proof and UL94 5V-0 flame retardant housing • Push-To-Test switch • Maintenace free NiCad battery • 120V or 277V AC input • Field selectable Chevrons • 6" High and 3/4" stroke letters • External LED status indicator • Available in Black or White • Damp location listed • Wet location shield accessory available (NEG-60). Sold separately. Finishes: Black (B), or White (W) Battery: 4.8V Replaceable 1.0Ah NiCad Input Voltage: 120V or 277V AC Dimensions: Width: 1-3/4" Height: 7-1/4" Length: 11-3/4" Max Extension: 9-1/2" - [NX-810-LED](https://noralighting.com/product/nx-810-led/) - Ideal for architectural applications where aesthetic and minimal profile appearance is desired. LED sources within the adjustable housing cast a brilliant red or green illumination on letters embedded inside the acrylic face. BODY 12" Width X 10-5/8" Height X 1-5/8" Depth Extruded aluminum housing and acrylic panel HOUSING 2-piece snap-together aluminum extrusion holding battery, LED source, PC board, and top of acrylic face. Housing adjusts to any angle up to 90 degrees. FACE Single or double face. Acrylic face has rounded and finished edge for attractive appearance. Red or green 6" lettering inside face. Stick-on chevrons included. MOUNTING Universal mount to wall, ceiling or side Mounting hardware included ELECTRICAL Voltage: 120V or 277V dual input Power Consumption: 3 watts normal / 5 watts emergency operation Light Source: Long life LED sources Testing: High-charge/ready operation indicator light with test button Circuitry Protection: Short circuit and brown-out protection (Disconnect for deep discharge) Life Expectancy: 25 Years with no change in illumination LABELS AND LISTINGS UL Listed NEC NFPA State & Municipal Certified to the energy efficiency standards of California Title 20 ACCESSORIES NEXC-R - Red stick-on chevron NEXC-G - Green stick-on chevron - [NS-401QAT/IC](https://noralighting.com/product/ns-401qat-ic/) - 4" Recessed housings deliver ultra-high design quality in any application with minimal apertures ideal for R/PAR20, PAR16 designer light sources. Minimum Clearances: : “IC” Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam insulation Socket: Medium base socket attached to plate that adjusts inside housing and can be removed in the field to convert to a floating socket Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be re-positioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Wattage: 15W max. - [NLIN-T](https://noralighting.com/product/nlin-t/) - Luminous T-Connector connects three L-Line Linear luminaires in a "T" shape. T-Connector includes two male connectors and one female connector for seamless continuity. Note: The system cannot be powered through L, T and X connectors. Lumens / Wattage: 4600lm / 46W Color Temperature: 3000K, 3500K or 4000K Color Rendering Index: 80+ CRI Finish: Aluminum L-Line LED Linear Luminaires: NLIN-2: 2' L-Line LED Direct Linear NLIN-4: 4' L-Line LED Direct Linear NLIN-8: 8' L-Line LED Direct Linear Mounting Kits: NLIN-CC: Pendant Mounting Kit NLIN-JBC: Surface Mount Kit Accessories: NLINSW-LENS/41: 41-ft. Continuous Lens (field cuttable) NLINSW-LENS/81: 81-ft. Continuous Lens (field cuttable) NEPK-20LEDUNV: 20W Emergency Battery with Remote Test Switch - [NLIN-L](https://noralighting.com/product/nlin-l/) - Luminous L-Connector connects two L-Line Linear luminaires in a 90º angle. L-Connector includes one male connector and one female connector for seamless continuity. Note: The system cannot be powered through L, T and X connectors. Lumens / Wattage: 3000lm / 31W Color Temperature: 3000K, 3500K or 4000K Color Rendering Index: 80+ CRI Finish: Aluminum or Black L-Line LED Linear Luminaires: NLIN-2: 2' L-Line LED Direct Linear NLIN-4: 4' L-Line LED Direct Linear NLIN-8: 8' L-Line LED Direct Linear Mounting Kits: NLIN-CC: Pendant Mounting Kit NLIN-JBC: Surface Mount Kit Accessories: NLINSW-LENS/41: 41-ft. Continuous Lens (field cuttable) NLINSW-LENS/81: 81-ft. Continuous Lens (field cuttable) NEPK-20LEDUNV: 20W Emergency Battery with Remote Test Switch - [NLIN-X](https://noralighting.com/product/nlin-x/) - Luminous X-Connector connects four L-Line Linear luminaires in a "X" shape. X-Connector includes three male connectors and one female connector for seamless continuity. Note: The system cannot be powered through L, T and X connectors. Lumens / Wattage: 5200lm / 47W Color Temperature: 3000K, 3500K or 4000K Color Rendering Index: 80+ CRI Finish: Aluminum L-Line LED Linear Luminaires: NLIN-2: 2' L-Line LED Direct Linear NLIN-4: 4' L-Line LED Direct Linear NLIN-8: 8' L-Line LED Direct Linear Mounting Kits: NLIN-CC: Pendant Mounting Kit NLIN-JBC: Surface Mount Kit Accessories: NLINSW-LENS/41: 41-ft. Continuous Lens (field cuttable) NLINSW-LENS/81: 81-ft. Continuous Lens (field cuttable) NEPK-20LEDUNV: 20W Emergency Battery with Remote Test Switch - [NHIC-17QAT](https://noralighting.com/product/nhic-17qat/) - IC Recessed housings are high-quality, lightweight units ideal for insulated ceilings. Air-tight construction reduces energy costs by reducing the amount of air escaping through the ceiling. Rated for direct contact with insulation (except spay foam insulation) and combustive materials, IC housings are easy and quick to install and accept a wide variety of high-quality, attractive finishing trims. Minimum Clearances: “IC” Housings are direct contact rated; no minimum clearance is required Socket Plate: The socket plate adjusts inside the housing and can be removed in the field to convert to a floating socket Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be repositioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Maximum Wattage: 90W (actual wattage varies with trim) - [NHIC-27QAT](https://noralighting.com/product/nhic-27qat/) - Shallow ceiling housings are ideal for locations with 6" joists and tighter ceiling clearances. IC Recessed housings are high quality, light weight units ideal for use in insulated ceilings. Air-tight construction reduces energy costs by reducing the amount of air escaping through the ceiling. Rated for direct contact with insulation (except spay foam insulation) and combustive materials, IC housings are easy and quick to install and accept a wide variety of high quality, attractive finishing trims. Minimum Clearances: “IC” Housings are direct contact rated; no minimum clearance is required Socket Plate: Socket plate adjusts inside housing and can be removed in the field to convert to a floating socket Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be repositioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Maximum Wattage: 75W (actual wattage varies with trim) - [NMRT-652TL (PAR30)](https://noralighting.com/product/nmrt-652tl-par30/) - PAR30 Lamp Holder for NMR Trimless Incandescent series. Adjustable socket for various lamp lengths. Easy twist and lock installation. Lamp holder is compatible with most PAR30 LED and Halogen Lamps. Socket: Medium Base Lamp: PAR30 Wattage: 75W max. Finish: Black or White Compatible Housings: NMRTLI-11: Line Voltage One-Head Multiple Lighting Housing NMRTLI-12: Line Voltage Two-Head Multiple Lighting Housing NMRTLI-13: Line Voltage Three-Head Multiple Lighting Housing - [NSW-6629](https://noralighting.com/product/nsw-6629/) - Innovative designed step light uses bright energy efficient LED light sources which provide an extraordinary 30,000 hour lamp life and are maintenance free. LED step lights are suitable for use on stairs, wall bases, or any application requiring a low profile, recessed fixture providing safe illumination in indoor dark areas. FEATURES Internal brackets for installation hardware. UL and cULus Listed for Wet locations. Can be mounted vertically or horizontally Input Voltage: 120VAC Lumens / Wattage: 29lm / 1W Color Temperature: 2700K Color Rendering Index: 90+ CRI Dimming: Non-Dimmable Face Plate: Lensed face plate includes tempered glass Finish: Brushed Nickel, Bronze, or White - [NSW-6619](https://noralighting.com/product/nsw-6619/) - Innovative designed step light uses bright energy efficient LED light sources which provide an extraordinary 30,000 hour lamp life and are maintenance free. LED step lights are suitable for use on stairs, wall bases, or any application requiring a low profile, recessed fixture providing safe illumination in indoor dark areas. FEATURES Internal brackets for installation hardware. UL and cULus Listed for Wet locations. Heavy duty Includes Horizontal and Vertical Face Plate Input Voltage: 120VAC Lumens / Wattage: 19lm / 1W Color Temperature: 2700K Color Rendering Index: 90+ CRI Dimming: Non-Dimmable Face Plate: Two louvered face plates are included (horizontal and vertical) Finish: Brushed Nickel, Bronze, or White - [NSW-6629PC](https://noralighting.com/product/nsw-6629pc/) - Mini LED Step Lights with an integral Photocell use the latest technology in solid state lighting. The energy saving photocell allows the step light to turn on in the evening and off in the morning. Each unit includes both a horizontal and vertical louver and can be easily installed in a standard single gang switch box. FEATURES Internal brackets for installation hardware. UL and cULus Listed for Wet locations. Photocell pre-installed for on/off function Can be mounted vertically or horizontally Input Voltage: 120VAC Lumens / Wattage: 29lm / 1W Color Temperature: 2700K Color Rendering Index: 90+ CRI Dimming: Non-Dimmable Photocell: The Photocell sensor comes pre-installed in the step light's face. The energy-saving dusk-to-dawn feature turns the LEDs on in the dark and off in the morning or in the presence of light. Face Plate: Lensed face plate includes tempered glass Finish: Brushed Nickel, Bronze, or White - [NSW-6619PC](https://noralighting.com/product/nsw-6619pc/) - Mini LED Step Lights with an integral photocell use the latest technology in solid-state lighting. The energy-saving photocell allows the step light to turn on in the evening and off in the morning. Each unit includes both a horizontal and vertical louver, and can be easily installed in a standard single-gang switch box. FEATURES Internal brackets for installation hardware. cULus Listed for Wet locations. Photocell pre-installed for on/off function Includes Horizontal and Vertical Face Plate Input Voltage: 120VAC Lumens / Wattage: 19lm / 1W Color Temperature: 2700K Color Rendering Index: 90+ CRI Dimming: Non-Dimmable Photocell: The Photocell sensor comes pre-installed in the step light's face. The energy-saving dusk-to-dawn feature turns the LEDs on in the dark and off in the morning or in the presence of light. Face Plate: Two louvered face plates are included (horizontal and vertical) Finish: Brushed Nickel, Bronze, or White - [NX-505-LED](https://noralighting.com/product/nx-505-led/) - Die-Cast aluminum low-profile LED exit signs are as brilliant and visible as standard incandescent signs, yet use a fraction of the power. LED light sources require no maintenance for 25 years–saving greatly on maintenance and upkeep costs. Exit signs are ideal for commercial and industrial standard non-emergency applications where low maintenance and operating costs are a must. Electrical Voltage: 120/277VAC dual input Wattage: 2W Light Source: LED Circuitry Protection: Short circuit protection. Brown-out protection. Construction: Brushed, die-cast aluminum, low-profile, snap-together housing constructed of 20-gauge steel. Snap-out knockouts for wiring. Face: Two front faces sent with the dual face unit, one face plate sent with the single face unit. 6" high text with color diffusion. Mounting: Exit sign can be mounted on a wall, side, or ceiling (all mounting hardware included). Labels and Listings 5-Year Limited Warranty UL Listed NFPA NEC - [NEX-752-LED](https://noralighting.com/product/nex-752-led/) - Rugged 20 gauge steel luminaires comply with the latest New York City codes and performance standards. Stencil letters are 8" high with 1" stroke, with a minimum of 100' viewing distance rating as required by UL 924 standard. FEATURES Meets City of New York Emergency Code requirements 20-gauge steel housing with white powder coating Fully-illuminated 8" letters with 1" stroke Includes single and double faces Removable knockout chevron directional arrows Illuminates for 90 minutes during power failure Universal mounting (Wall or Side) HOUSING 20-gauge steel housing includes an additional face for a double-sided exit sign. Adjustable emergency heads feature a unique twist-locking collar. Low profile snap-together. Snap-out knockouts for wiring. MOUNTING Steel case includes two knockouts for side of wall mounting (hardware included). LABELS AND LISTINGS 5 year limited warranty Meets City of New York emergency code requirements (NY Approved) NFPA-101 cULus Listed for damp locations - [NEX-751-LED](https://noralighting.com/product/nex-751-led/) - Rugged 20 gauge steel luminaires comply with the latest New York City codes and performance standards. Available in exit or exit/emergency combination units. FEATURES 120 / 277VAC Dual voltage operation 20-gauge steel housing with white powder coating Large 8" font with 1" stroke Includes single and double faces Removable knockout chevron directional arrows Illuminates for 90 minutes during power failure Meets City of New York state codes HOUSING 20-gauge steel housing includes an additional face for a double-sided exit sign. Adjustable emergency heads feature a unique twist-locking collar. Low profile snap-together. Snap-out knockouts for wiring. MOUNTING The steel case includes two knockouts for side of wall mounting (hardware included). LABELS AND LISTINGS 5 year limited warranty Meets City of New York emergency code requirements (NY Approved) NEC OSHA cULus Listed for damp locations - [NELOCAC-11RP](https://noralighting.com/product/nelocac-11rp/) - 11" ELO luminaires are a thin 1/2" surface mounted luminaire. Luminaire is available in 4", 6", 8", 11" or 16" sizes and mounts easily over a standard or fire rated junction boxes. Luminaires include a retrofit kit accessory for installation over recessed housings. Features Dedicated color temperatures (2700K, 3500K, 4000K, 5000K) at 90+ CRI Surface mounted or retrofit over existing recessed housings Available in five sizes (4", 6", 8", 11" or 16") Dimmable with Triac or ELV dimmers cETLus Listed for Damp Location 5-year limited warranty Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Lumens / Wattage: 1700lm / 24W Color Temperature: 2700K, 3500K, 4000K or 5000K Color Rendering Index: 90+ CRI Finish: White (accepts decorative rings) Retrofit Kit: Each luminaire includes a retrofit kit with medium base socket adapter to mount over 5" or 6" recessed housings Accessories: NLOCAC-11R: 11" Decorative Ring in Black, Brushed Nickel, Chrome or Matte Powder White finish - [NELOCAC-6RP](https://noralighting.com/product/nelocac-6rp/) - 6" ELO luminaires are a thin 1/2" surface mounted luminaire. Luminaire is available in 4", 6", 8", 11" or 16" sizes and mounts easily over a standard or fire rated junction boxes. Luminaires include a retrofit kit accessory for installation over recessed housings. Features Dedicated color temperatures (2700K, 3500K, 4000K, 5000K) at 90+ CRI Surface mounted or retrofit over existing recessed housings Available in five sizes (4", 6", 8", 11" or 16") Dimmable with Triac or ELV dimmers cETLus Listed for Damp Location 5-year limited warranty Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Lumens / Wattage: 700lm / 12W Color Temperature: 2700K, 3500K, 4000K or 5000K Color Rendering Index: 90+ CRI Finish: White (accepts decorative rings) Retrofit Kit: Each luminaire includes a retrofit kit with a medium base socket adapter to mount over 5" or 6" recessed housings Accessories: NSEM-6WD: Enclosure with Emergency Driver NSEM-6ND: Decorative Enclosure without Emergency Driver NLOCAC-6R: 6" Decorative Ring in Brushed Nickel, Chrome or Matte Powder White finish - [NL-401](https://noralighting.com/product/nl-401/) - 4” low voltage new construction housing provides crisp, defined MR16 quartz halogen illumination to any insulated ceiling application. The small profile of this series provides easy installation to any joist or steel stud construction. A wide variety of attractive adjustable trims allows fine tuned aiming of direction light sources. Input Voltage: 120V Output Voltage: 12V Transformer: Magnetic or Electronic (must specify) Wattage: 50W max. (can be labeled at lower wattage, consult factory) Lamp / Socket: MR16 / GU5.3 Minimum Clearances: Non-IC housings require a minimum clearance of 3” from thermal insulation and 1/2" from adjacent building components. - [NRMC3-41](https://noralighting.com/product/nrmc3-41/) - The Marquise III Retrofit Series replaces existing recessed trims and light sources. Series includes Signify® COB LED with optimized beam spreads, dimmable driver, and medium base socket to replace old light sources with the latest LED technology. Features Retrofit existing architectural or commercial frame-ins with the latest LED technology Over 80% energy savings when compared to incandescent Signify® COB LED Technology Specifiable beam spreads Lumens / Wattage: 1300lm / 12W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Dimming: Triac or ELV Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch Listing: - cULus classified for Wet Location - 5-Year Limited Warranty - [NRMC3-42](https://noralighting.com/product/nrmc3-42/) - The Marquise III Retrofit Series replaces existing recessed trims and light sources. Series includes Signify® COB LED with optimized beam spreads, dimmable driver, and medium base socket to replace old light sources with the latest LED technology. Features Retrofit existing architectural or commercial frame-ins with the latest LED technology Over 80% energy savings when compared to incandescent Signify® COB LED Technology Specifiable beam spreads Lumens / Wattage: 1300lm / 12W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Dimming: Triac or ELV Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch Listing: - cULus classified for Wet Location - 5-Year Limited Warranty - [NRMC3-51](https://noralighting.com/product/nrmc3-51/) - The Marquise III Retrofit Series replaces existing recessed trims and light sources. Series includes Signify® COB LED with optimized beam spreads, dimmable driver, and medium base socket to replace old light sources with the latest LED technology. Features Retrofit existing architectural or commercial frame-ins with the latest LED technology Over 80% energy savings when compared to incandescent Signify® COB LED Technology Specifiable beam spreads Lumens / Wattage: 1300lm / 12W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Dimming: Triac or ELV Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch Listing: - cULus classified for Wet Location - 5-Year Limited Warranty - [NRMC3-52](https://noralighting.com/product/nrmc3-52/) - The Marquise III Retrofit Series replaces existing recessed trims and light sources. Series includes Signify® COB LED with optimized beam spreads, dimmable driver, and medium base socket to replace old light sources with the latest LED technology. Features Retrofit existing architectural or commercial frame-ins with the latest LED technology Over 80% energy savings when compared to incandescent Signify® COB LED Technology Specifiable beam spreads Lumens / Wattage: 1300lm / 12W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Dimming: Triac or ELV Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch Listing: - cULus classified for Wet Location - 5-Year Limited Warranty - [NRMC3-61](https://noralighting.com/product/nrmc3-61/) - The Marquise III Retrofit Series replaces existing recessed trims and light sources. Series includes Signify® COB LED with optimized beam spreads, dimmable driver, and medium base socket to replace old light sources with the latest LED technology. Features Retrofit existing architectural or commercial frame-ins with the latest LED technology Over 80% energy savings when compared to incandescent Signify® COB LED Technology Specifiable beam spreads Lumens / Wattage: 1300lm / 12W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Dimming: Triac or ELV Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch Listing: - cULus classified for Wet Location - 5-Year Limited Warranty - [NRMC3-62](https://noralighting.com/product/nrmc3-62/) - The Marquise III Retrofit Series replaces existing recessed trims and light sources. Series includes Signify® COB LED with optimized beam spreads, dimmable driver, and medium base socket to replace old light sources with the latest LED technology. Features Retrofit existing architectural or commercial frame-ins with the latest LED technology Over 80% energy savings when compared to incandescent Signify® COB LED Technology Specifiable beam spreads Lumens / Wattage: 1300lm / 12W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Dimming: Triac or ELV Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch Listing: - cULus classified for Wet Location - 5-Year Limited Warranty - [NMA-EW-10](https://noralighting.com/product/nma-ew-10/) - Extension cables are used to extend the length between luminaire and driver enclosure. Can be connected together to create custom lengths. Maximum length between luminaire and driver is 40'. Cable Length: 10' Compatible Luminaires: NM1-PRDC: 1" M1+ LED Round Downlight NM2-2RTLDC: 2" M2 Trimless LED Round Downlight - [NMA-EW-4](https://noralighting.com/product/nma-ew-4/) - Extension cables are used to extend the length between luminaire and driver enclosure. Can be connected together to create custom lengths. Maximum length between luminaire and driver is 40'. Cable Length: 4' Compatible Luminaires: NM1-PRDC: 1" M1+ LED Round Downlight NM2-2RTLDC: 2" M2 Trimless LED Round Downlight - [NFP-S425](https://noralighting.com/product/nfp-s425/) - New construction plate for 4" FLIN Square LED Recessed Downlight. Assist indicating wiring location and cutting guide. Compatible Luminaire: NFLIN-S407 - [NM2-EW-10](https://noralighting.com/product/nm2-ew-10/) - Extension cables are used to extend the length between luminaire and driver enclosure. Can be connected together to create custom lengths. Maximum length between luminaire and driver is 40'. Cable Length: 10' Compatible Fixtures: NM2-2RDC: 2" M2 LED Round Downlight NM2-2RDCS: 2" M2 LED Round Lensed Downlight NM2-2RG: 2" M2 LED Round Adjustable Gimbal NM2-2R270: 2" M2 LED Round Adjustable Elbow NM2-2SDC: 2" M2 LED Square Downlight NM2-2SB: 2" M2 LED Square Baffle NM4-RDC: 4" M4 LED Round Downlight NM4-RG: 4" M4 LED Round Adjustable Gimbal NM4-R470: 4" M4 LED Round Adjustable Elbow - [NM2-EW-4](https://noralighting.com/product/nm2-ew-4/) - Extension cables are used to extend the length between luminaire and driver enclosure. Can be connected together to create custom lengths. Maximum length between luminaire and driver is 40'. Cable Length: 4' Compatible Fixtures: NM2-2RDC: 2" M2 LED Round Downlight NM2-2RDCS: 2" M2 LED Round Lensed Downlight NM2-2RG: 2" M2 LED Round Adjustable Gimbal NM2-2R270: 2" M2 LED Round Adjustable Elbow NM2-2SDC: 2" M2 LED Square Downlight NM2-2SB: 2" M2 LED Square Baffle NM4-RDC: 4" M4 LED Round Downlight NM4-RG: 4" M4 LED Round Adjustable Gimbal NM4-R470: 4" M4 LED Round Adjustable Elbow - [NFP-R725](https://noralighting.com/product/nfp-r725/) - New construction frame-in can be used to assist installing canless recessed downlighting. Helps indicate wiring location and cutting guide. Compatible Luminaires: NLTH-81TW: 8" Theia LED Downlight (2700K/3000K/3500K/4000K/5000K) - [NPSU-96W/24](https://noralighting.com/product/npsu-96w-24/) - 24V Constant Voltage Class 2 Dimmable LED driver can be used with Nora Lighting's 24 Volt systems. Compatible with Triac, ELV, MLV, 0-10V, or PWM dimmers and a wide range of applications. Enclosure is rated for wet locations and cULus listed. Input Voltage: 110V-277V Output Voltage: 24VDC Wattage: 96W Dimming: Triac, ELV, MLV, 0-10V, or PWM Knockouts: Five Knockouts Listings: cULus Listed for Wet Locations Optional Accessories: NALTL-10: 10' Power Line Connector NALTL-30: 30' Power Line Connector - [NPSU-60W/24](https://noralighting.com/product/npsu-60w-24/) - 24V Constant Voltage Class 2 Dimmable LED driver can be used with Nora Lighting's 24 Volt systems. Compatible with Triac, ELV, MLV, 0-10V, or PWM dimmers and a wide range of applications. Enclosure is rated for wet locations and cULus listed. Input Voltage: 110V-277V Output Voltage: 24VDC Wattage: 60W Dimming: Triac, ELV, MLV, 0-10V, or PWM Knockouts: Five Knockouts Listings: cULus Listed for Wet Locations Optional Accessories: NALTL-10: 10' Power Line Connector NALTL-30: 30' Power Line Connector - [NFP-R613](https://noralighting.com/product/nfp-r613/) - New construction plate can be used to assist in installing canless recessed downlighting. Helps indicate wiring location and cutting guide. Compatible Luminaires: NFLAT-R6TW: 6" FLAT Non-Metallic LED Downlight NFLINA-R6TWMPW: 6" FLIN Adjustable LED Downlight NLTH-61TW: 6" Theia LED Downlight NQZ2-61TWTW-MPW: 6" Quartz LED Downlight - [NFP-R413](https://noralighting.com/product/nfp-r413/) - New construction frame-in can be used to assist installing canless recessed downlighting. Helps indicate wiring location and cutting guide. Compatible Luminaires: NFLAT-R4TW: 4" FLAT Non-Metallic LED Downlight NFLINA-R4TWMPW: 4" FLIN Adjustable LED Downlight NLTH-41TW: 4" Theia LED Downlight - [NEFLINTW-EW-4](https://noralighting.com/product/neflintw-ew-4/) - Extension cables extend the length between the luminaire and the driver enclosure. They can be connected together to create custom lengths. Length: 4 feet Compatible Luminaires: NCSC-R4D1TWMPW: 4" Contractor Series Can-less Deep Downlight NCSC-R4W2TWMPW: 4" Contractor Series Can-less Wafer Downlight NCSC-R6D1TWMPW: 6" Contractor Series Can-less Deep Downlight NCSC-R6W2TWMPW: 6" Contractor Series Can-less Wafer Downlight NEFLINTW-R4MPW: 4" FLIN Wafer LED Downlight NEFLINTW-R6MPW: 6" FLIN Wafer LED Downlight NFLAT-R4TW: 4" FLAT Non-Metallic LED Downlight NFLAT-R6TW: 6" FLAT Non-Metallic LED Downlight - [NEFLINTW-EW-20](https://noralighting.com/product/neflintw-ew-20/) - Extension cables extend the length between the luminaire and the driver enclosure. They can be connected together to create custom lengths. Length: 20 feet Compatible Luminaires: NCSC-R4D1TWMPW: 4" Contractor Series Can-less Deep Downlight NCSC-R4W2TWMPW: 4" Contractor Series Can-less Wafer Downlight NCSC-R6D1TWMPW: 6" Contractor Series Can-less Deep Downlight NCSC-R6W2TWMPW: 6" Contractor Series Can-less Wafer Downlight NEFLINTW-R4MPW: 4" FLIN Wafer LED Downlight NEFLINTW-R6MPW: 6" FLIN Wafer LED Downlight NFLAT-R4TW: 4" FLAT Non-Metallic LED Downlight NFLAT-R6TW: 6" FLAT Non-Metallic LED Downlight - [NOX-434](https://noralighting.com/product/nox-434/) - ** While Supplies Last ** 4" Onyx Adjustable Series offers an economical quality solution to LED Retrofit Downlighting. Compatible with most 4" housings, each luminaire includes a medium base socket adapter. Adjustable retrofit allows LED module to tilt up to 18°. Features: 18° Adjustable Integral dimmable driver Includes medium base socket adapter for easy retrofitting in 4" recessed housings Quick connector is compatible with dedicated LED housings. Required by some codes in recessed can applications or to meet energy rebate program requirements Lumens / Wattage: 600lm / 10.5W Color Temperature: 4000K Finish: White Dimming: Triac or ELV Accessories: NOX-4OR-W: 4" Round Oversize Ring for Onyx NRA-212SM: GU24 Socket Adapter - [NHIC-5LMRAT](https://noralighting.com/product/nhic-5lmrat/) - 5" IC Air-Tight Dedicated New Construction housings are designed for use with all 5" Nora Lighting LED retrofit luminares. IC housings are high quality, light weight units ideal for use in insulated ceilings. Airtight construction reduces energy costs by reducing the amount of air escaping through the ceiling. Rated for direct contact with insulation (except spay foam insulation) and combustive materials, Nora IC housings are easy and quick to install. Features IC rated for direct contact with insulation Quick connect provided for electrical connection to the LED Trim Airtight in accordance to ASTM E283 cULus Listed for Damp Location (Wet location when used with compatible luminaire) Dimmable 24-1/2" bar hangers included with captive nails and alignment foot Compatible Downlights: NLCBC-569: 5" Cobalt Adjustable Retrofit Downlight NLCBC2-5: 5" Cobalt Click Retrofit Series NOX-56: 5"/6" Onyx LED Series NOXAC-56: 5"/6" AC Onyx LED Series NOXTW-56: 5"/6" Onyx Tunable White LED Series NPR-56: 5"/6" Pearl LED Retrofit Downlights NRMC3-5: 5" Marquise III LED Retrofit Series - [NHIC-17QNBAT](https://noralighting.com/product/nhic-17qnbat/) - IC Recessed housings are high quality, light weight units ideal for use in insulated ceilings. Air-tight construction reduces energy costs by reducing the amount of air escaping through the ceiling. Rated for direct contact with insulation (except spay foam insulation) and combustive materials, IC housings are easy and quick to install and accept a wide variety of high quality, attractive finishing trims. Minimum Clearances: “IC” Housings are direct contact rated; no minimum clearance is required Floating Socket: Socket is free floating and installs on trim Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be repositioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Maximum Wattage: 90W (actual wattage varies with trim) - [NTE-864](https://noralighting.com/product/nte-864/) - MAX Mini LED track heads deliver 1000 lumens, ideal for residential ceilings and commercial applications. Luminaires include Cree® COB LED technology with TIR narrow flood optic. Constructed of extruded and machined aluminum, the heat-sink and integrated driver housing provide a sleek and modern look, designed to quietly compliment any space. Features Dedicated CCT (2700K, 3000K, 3500K, 4000K) Deliver up to 1000 lumens TIR narrow flood optic Integral dimmable driver Adjustability: 359° horizontal and 90° vertical rotation Lumens / Wattage: Up to 1000lm / 13W Color Rendering Index: 90+ CRI Beam Spread: 41° Narrow Flood Color Temperature: Dedicated CCT (2700K, 3000K, 3500K, 4000K) Dimming: Triac or ELV Accessories: NT-366: Round Monopoint Canopy NT-319: Square Monopoint Canopy - [NTE-865](https://noralighting.com/product/nte-865/) - MAX LED track heads deliver 2450 lumens, ideal for higher ceilings and commercial applications. Luminaires include Cree® COB LED technology with TIR optics that can be specified in three beam angles. Constructed of extruded and machined aluminum, the heat-sink and integrated driver housing provide a sleek and modern look, designed to quietly compliment any space. Features Dedicated CCT (2700K, 3000K, 3500K, 4000K) Deliver up to 2450 lumens Available in spot, narrow flood or flood beam spreads Integral dimmable driver Adjustability: 359° horizontal and 90° vertical rotation Lumens / Wattage: Up to 2450lm / 25W Color Rendering Index: 90+ CRI Beam Spread: 20° Spot, 32° Narrow Flood or 54° Flood Color Temperature: Dedicated CCT (2700K, 3000K, 3500K, 4000K) Dimming: Triac or ELV Accessories: NTE-855BD: Barn Door NT-366: Round Monopoint Canopy NT-319: Square Monopoint Canopy - [NFC-R275](https://noralighting.com/product/nfc-r275/) - New construction frame-in with collar for 2" M2 LED Recessed Series. Used for pre-wiring and easier layout planning. Dimensions: 4.33" x 4.33" Compatible Fixtures: NM2-2R270: 2" M2 LED Round Adjustable Elbow NM2-2RDC: 2" M2 LED Round Downlight NM2-2RDCS: 2" M2 LED Round Lensed Downlight NM2-2RG: 2" M2 LED Round Adjustable Gimbal NM2-2RTLDC: 2" M2 LED Trimless Downlight NM2-2SB: 2" M2 LED Square Baffle NM2-2SDC: 2" M2 LED Square Downlight - [NFC-R5](https://noralighting.com/product/nfc-r5/) - New construction frame-in with collar for pre-wiring and easier layout planning. Dimensions: 14" x 9.25" Compatible Fixture: NMC-6RTW: 6" M-Curve Adjustable LED Downlight - [NFC-R725](https://noralighting.com/product/nfc-r725/) - New construction frame-in with collar for 8" Theia LED Recessed Downlight. Assist in indicating wiring location, cutting guide, and pre-wiring. Compatible Luminaires: NLTH-81TW: 8" Theia Can-less LED Round Downlight - [NFC-R413](https://noralighting.com/product/nfc-r413/) - New construction frame-in with collar for pre-wiring and easier layout planning. Dimensions: 12.06" x 7.56" Compatible Fixtures: NIOC-4RNB: 4" Iolite Can-less Round Bullnose NIOC-4RNDC: 4" Iolite Can-less Round Downlight NIOC-4RPH: 4" Iolite Can-less Round Pinhole NIOC-4RSLA: 4" Iolite Can-less Round Adjustable Slot NIOC-4SNDSQ: 4" Iolite Can-less Square Downlight - [NFC-R231](https://noralighting.com/product/nfc-r231/) - New construction frame-in with collar for pre-wiring and easier layout planning. Dimensions: 12.06" x 7.56" Compatible Fixtures: NIOC-1RNB: 1" Iolite Can-less Round Bullnose NIOC-1RNG: 1" Iolite Can-less Round Downlight NIOC-1SNG: 1" Iolite Can-less Square Downlight - [NF-R725](https://noralighting.com/product/nf-r725/) - New construction frame-in can be used to assist installing can-less recessed downlighting. Helps indicate wiring location and cutting guide. Compatible Luminaires: NLTH-81TW: 8" Theia Can-less LED Round Downlight - [NF-R2](https://noralighting.com/product/nf-r2/) - New construction frame-in can be used to assist installing can-less recessed downlighting. Helps indicate wiring location and cutting guide. Compatible Luminaires: NM1-PRDC: 1" M1+ LED Round Downlight - [NTA-97](https://noralighting.com/product/nta-97/) - 6" A19 Cone Reflector for Line Voltage Recessed Housings. Rated up to 100W. Compatible Housings: NHIC-17/100DWQA: IC Air-Tight New Construction (Rated up to 100W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 60W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 60W) NHR-26Q: Non-IC Remodel (Rated up to 100W) NH-26Q: Non-IC New Construction (Rated up to 100W) Mounting: Trim includes three trim blades that securely mount trim in housing. Listing: cULus Listed for Damp Location when used with Compatible Housing - [NRLM-16](https://noralighting.com/product/nrlm-16/) - A beautiful timeless aluminum spun shade fits many decors. The LED optics are deep set in the bowl for even distribution and visual comfort. Shades are available in three sizes and multiple finishes. Features Over 80% energy savings when compared to incandescent Built-in dimmable LED driver allows for minimal canopy size 5-year limited warranty Input Voltage: 120V / 277V Lumens / Wattage: 2500lm / 27W or 3800lm / 48W Color Temperature: 3000K, 3500K or 4000K Color Rendering Index: 90+ CRI Outer Shade Finishes: Black, Gun Metal or White. (Inner shade is white) Mounting Options: Cable or Stem Emergency: NEPK-20LEDUNV: Remote Mounted Emergency Driver - [NT-2348](https://noralighting.com/product/nt-2348/) - Live end feed powers the track system from the end of a run. Junction box canopy mounts over a 4" or 3" octagon outlet box and includes two knockouts. Compatible Track System: Two-Circuit Polarity: Right Polarity Input Voltage: 120V, 60Hz, 20A max. per circuit Maximum Wattage: 2400W per circuit Dimming: Triac or ELV Finish: Black, Silver, or White - [NT-2348/A](https://noralighting.com/product/nt-2348-a/) - Powers track system from the end of a run. Includes two knockouts and can be utilized on hard, grid ceilings, or pendant suspended track. Current Limiter can be used as an on/off switch. Breaker features a "tripped" condition indicator. Why and when to use a Nora Current Limiter? Use Nora's track current limiter in tough watts per square foot. Commercial, residential and NEC calculate the wattage of a line voltage track run by the length of the run, not by the wattage consumed. NEC applies 45 watts per foot regardless of actual load. Example: (3) 39W Fixtures on a 20' run would be calculated at 900W (20' at 45 Watts) With Nora's 1 amp current limiter track feed, this run is now limited to 120 watts. A savings of 780 watts in the watts per square foot. Compatible Track System: Two-Circuit Polarity: Right Polarity Input Voltage: 120V Current Limiter: 0.5A, 1A, 2.5A, 5A, 7.5A, 10A, 12A, 14A Dimming: Triac or ELV Finish: Black, Silver, or White - [NHMIC3-4](https://noralighting.com/product/nhmic3-4/) - Dedicated air-tight new construction housing for Marquise III LED downlights. Clearance: “IC” Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam insulation. Input Voltage: 120V or 120-277V Lumens / Wattage: Up to 1500lm / 16W Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Trims: NRM3-41: 4" Round Reflector NRM3-42: 4" Round Baffle NRM3-43: 4" Square Reflector - [NHM3-6](https://noralighting.com/product/nhm3-6/) - Dedicated air-tight remodel housing for Marquise III LED downlights. Clearance: Non-IC housings require a minimum clearance of 3” from thermal insulation and 1/2” from adjacent building components. Input Voltage: 120V or 120-277V Lumens / Wattage: Up to 2500lm / 26W Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Trims: NRM3-61: 6" Open Reflector NRM3-62: 6" Baffle NRM3-64: 6" Surface Adjustable NRM3-67: 6" Adjustable Regressed Baffle NRM3-68: 6" Open Reflector for Decorative Glass NRM3-69: 6" Adjustable Regressed Reflector - [NHMIC3-6](https://noralighting.com/product/nhmic3-6/) - Dedicated air-tight new construction housing for Marquise III LED downlights. Clearance: “IC” Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam insulation. Input Voltage: 120V or 120-277V Lumens / Wattage: Up to 1500lm / 16W Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Trims: NRM3-61: 6" Open Reflector NRM3-62: 6" Baffle NRM3-64: 6" Surface Adjustable NRM3-67: 6" Adjustable Regressed Baffle NRM3-68: 6" Open Reflector for Decorative Glass NRM3-69: 6" Adjustable Regressed Reflector - [NT-348](https://noralighting.com/product/nt-348/) - Live end feed powers the track system from the end of a run. Junction box canopy mounts over a 4" or 3" octagon outlet box and includes two knockouts. Compatible Track System: One-Circuit Polarity: Right Polarity Input Voltage: 120V, 60Hz, 20A max. Maximum Wattage: 2400W Dimming: Triac or ELV Finish: Black, Silver, or White - [NT-348/A](https://noralighting.com/product/nt-348-a/) - Powers track system from the end of a run. Includes two knockouts and can be utilized on hard, grid ceilings, or pendant suspended track. Current Limiter can be used as an on/off switch. Breaker features a "tripped" condition indicator. Why and when to use a Nora Current Limiter? Use Nora's track current limiter in tough watts per square foot. Commercial, residential and NEC calculate the wattage of a line voltage track run by the length of the run, not by the wattage consumed. NEC applies 45 watts per foot regardless of actual load. Example: (3) 39W Fixtures on a 20' run would be calculated at 900W (20' at 45 Watts) With Nora's 1 amp current limiter track feed, this run is now limited to 120 watts. A savings of 780 watts in the watts per square foot. Compatible Track System: One-Circuit Polarity: Right Polarity Input Voltage: 120V Current Limiter: 0.5A, 1A, 2.5A, 5A, 7.5A, 10A, 12A, 14A Dimming: Triac or ELV Finish: Black, Silver, or White - [NLOPAC-4BKT-2](https://noralighting.com/product/nlopac-4bkt-2/) - Universal bracket for mounting 4” & 6” AC Opal to 3” or 4” junction boxes. Universal bracket is included with NLOPAC-R4509 series. Compatible Luminaires: NLOPAC-R4T24 = 4" Title 24 AC Opal NLOPAC-R4509 = 4" AC Opal NLOPAC-R6T24 = 6" Title 24 AC Opal NLOPAC-R6509 = 6" AC Opal NLOPAC-R6REGT24TW = 6" Regressed AC Opal - [NAP-3RDSLEEVE](https://noralighting.com/product/nap-3rdsleeve/) - Round sleeve shade accessory for 3" Apollo round housings. It covers the internal LED mechanism if visible below the ceiling. - [NAP-TLMR-3R](https://noralighting.com/product/nap-tlmr-3r/) - Round Trimless Mud Plate for 3" Apollo Round Trimless. Required for trimless drywall installations. - [NAPC-3R05](https://noralighting.com/product/napc-3r05/) - Round ceiling collar for 3" Apollo housings. Threaded collar replaces the existing collar installed on housing. Can be used with ceilings 0.5" to 0.875" thick - [NAPO-3D25](https://noralighting.com/product/napo-3d25/) - Replacement 26° Spot TIR optic for 3" Apollo field adjustable optic housings. Easily twist and lock on the COB LED chip. - [NAPO-3D40](https://noralighting.com/product/napo-3d40/) - Replacement 38° Narrow Flood TIR optic for 3" Apollo field adjustable optic housings. Easily twist and lock on the COB LED chip. - [NAPO-3D55](https://noralighting.com/product/napo-3d55/) - Replacement 55° Flood TIR optic for 3" Apollo field adjustable optic housings. Easily twist and lock on the COB LED chip. - [NAPC-3R10](https://noralighting.com/product/napc-3r10/) - Round ceiling collar for 3" Apollo housings. Threaded collar replaces the existing collar installed on housing. Can be used with ceilings 0.875" to 1.25" thick - [NAPC-3R15](https://noralighting.com/product/napc-3r15/) - Round ceiling collar for 3" Apollo housings. Threaded collar replaces the existing collar installed on housing. Can be used with ceilings 1.25" to 1.625" thick - [NAPC-3R20](https://noralighting.com/product/napc-3r20/) - Round ceiling collar for 3" Apollo housings. Threaded collar replaces the existing collar installed on housing. Can be used with ceilings 1.625" to 2" thick - [NAPC-3S05](https://noralighting.com/product/napc-3s05/) - Square ceiling collar for 3" Apollo housings. Threaded collar replaces the existing collar installed on housing. Can be used with ceilings 0.5" to 0.875" thick - [NAPC-3S10](https://noralighting.com/product/napc-3s10/) - Square ceiling collar for 3" Apollo housings. Threaded collar replaces the existing collar installed on housing. Can be used with ceilings 0.875" to 1.25" thick - [NAPC-3S15](https://noralighting.com/product/napc-3s15/) - Square ceiling collar for 3" Apollo housings. Threaded collar replaces the existing collar installed on housing. Can be used with ceilings 1.25" to 1.625" thick - [NAPC-3S20](https://noralighting.com/product/napc-3s20/) - Square ceiling collar for 3" Apollo housings. Threaded collar replaces the existing collar installed on housing. Can be used with ceilings 1.625" to 2" thick - [NAP-TLMR-3S](https://noralighting.com/product/nap-tlmr-3s/) - Square Trimless Mud Plate for 3" Apollo Square Trimless. Required for trimless drywall installations. - [NAP-3SQSLEEVE](https://noralighting.com/product/nap-3sqsleeve/) - Square sleeve shade accessory for 3" Apollo square housings. It covers the internal LED mechanism if visible below the ceiling. - [NTL-215/75](https://noralighting.com/product/ntl-215-75/) - ** While Supplies Last ** Nora Lighting's low voltage track fixtures are an outstanding, state-of-the-art solution for energy efficient task and accent lighting. Used where color rendition and high resolution are desired. low voltage track features precise beam control, a crisp "white" light and longer lamp life. Featuring top quality and great design at an affordable price, all 200 Series track fixtures are energy efficient and have a built-in 50 or 75 watt transformer. Use different sized beams of halogen MR16 lamps to customize your lighting effects, highlight furnishings and illuminate favorite decorations. Finish: Black Wattage: 75W max. - [NTH-121](https://noralighting.com/product/nth-121/) - ** While supplies last ** Line voltage cylindrical housing with round back design and black baffle. Includes a yoke that provides full adjustment of light source for special aiming and has dual tightening knobs assure secure lock on angle position. Lamp: PAR16 Track Adapter: Standard "H" Style, "J" Style or "L" Style - [NTE-LIN4VIS](https://noralighting.com/product/nte-lin4vis/) - 4' Visor accessory to cover NTE-LIN4TW and direct light towards a wall. Length: 4' Finish: Black, Silver, or White Compatible Track Head: NTE-LIN4TW: 4' T-Line Linear Track Head with Selectable CCT - [NTE-LIN2VIS](https://noralighting.com/product/nte-lin2vis/) - 2' Visor accessory to cover NTE-LIN2TW and direct light towards a wall. Length: 2' Finish: Black, Silver, or White Compatible Track Head: NTE-LIN2TW: 2' T-Line Linear Track Head with Selectable CCT - [NTE-LIN4SASYLENS](https://noralighting.com/product/nte-lin4sasylens/) - The asymmetric lens replaces the symmetrical lens included with NTE-LIN4TW. Used to change the light distribution towards a single wall wash. Length: 4' Compatible Track Head: NTE-LIN4TW: 4' T-Line Linear Track Head with Selectable CCT - [NTE-LIN2SASYLENS](https://noralighting.com/product/nte-lin2sasylens/) - The asymmetric lens replaces the symmetrical lens included with NTE-LIN2TW. Used to change the light distribution towards a single wall wash. Length: 2' Compatible Track Head: NTE-LIN2TW: 2' T-Line Linear Track Head with Selectable CCT - [NTE-LIN4DASYLENS](https://noralighting.com/product/nte-lin4dasylens/) - The double asymmetric lens replaces the symmetrical lens included with NTE-LIN4TW. Used to change the light distribution towards two opposite walls. Length: 4' Compatible Track Head: NTE-LIN4TW: 4' T-Line Linear Track Head with Selectable CCT - [NTE-LIN2DASYLENS](https://noralighting.com/product/nte-lin2dasylens/) - The double asymmetric lens replaces the symmetrical lens included with NTE-LIN2TW (2' T-Line Track Head). Used to change the light distribution towards two opposite walls. Length: 2' Compatible Track Head: NTE-LIN2TW: 2' T-Line Linear Track Head with Selectable CCT - [NT-330](https://noralighting.com/product/nt-330/) - The flexible track head extension rod extends the length that the track head is suspended from the track system. Compatible Track Systems: One-Circuit and Two-Circuit Length: 18" Finish: Black or White Compatible Track Heads: NTH-618: Italia™ Line Voltage MR16 GU10 Track Head NTH-694: Round Back with Black Baffle Line Voltage MR16 GU10 Track Head NTH-695: Telescope Line Voltage MR16 GU10 Track Fixture - [NT-325](https://noralighting.com/product/nt-325/) - Extends the length of a track fixture that is suspended from the track or monopoint. Compatible Track Systems: One-Circuit and Two-Circuit Length: 48" (additional sizes are available) Finish: Black, Silver, or White Compatible Monopoints: NT-319: Square Monopoint Canopy for Line Voltage Track Heads NT-366: Round Monopoint Canopy for Line Voltage Track Heads - [NT-324](https://noralighting.com/product/nt-324/) - Extends the length of a track fixture that is suspended from the track or monopoint. Compatible Track Systems: One-Circuit and Two-Circuit Length: 36" (additional sizes are available) Finish: Black, Silver, or White Compatible Monopoints: NT-319: Square Monopoint Canopy for Line Voltage Track Heads NT-366: Round Monopoint Canopy for Line Voltage Track Heads - [NT-323](https://noralighting.com/product/nt-323/) - Extends the length of a track fixture that is suspended from the track or monopoint. Compatible Track Systems: One-Circuit and Two-Circuit Length: 24" (additional sizes are available) Finish: Black, Silver, or White Compatible Monopoints: NT-319: Square Monopoint Canopy for Line Voltage Track Heads NT-366: Round Monopoint Canopy for Line Voltage Track Heads - [NT-322](https://noralighting.com/product/nt-322/) - Extends the length of a track fixture that is suspended from the track or monopoint. Compatible Track Systems: One-Circuit and Two-Circuit Length: 18" (additional sizes are available) Finish: Black, Silver, or White Compatible Monopoints: NT-319: Square Monopoint Canopy for Line Voltage Track Heads NT-366: Round Monopoint Canopy for Line Voltage Track Heads - [NT-322/12](https://noralighting.com/product/nt-322-12/) - Extends the length of a track fixture that is suspended from the track or monopoint. Compatible Track Systems: One-Circuit and Two-Circuit Length: 12" (additional sizes are available) Finish: Black or White Compatible Monopoints: NT-319: Square Monopoint Canopy for Line Voltage Track Heads NT-366: Round Monopoint Canopy for Line Voltage Track Heads - [NT-379](https://noralighting.com/product/nt-379/) - A round canopy is used to cover a junction box and power an NTE-850 track head. Input Voltage: 120V Dimming: Triac or ELV Finish: Black, Silver, or White Compatible Track Heads: NTE-850: Aiden LED Track Head, 800lm - [NT-374](https://noralighting.com/product/nt-374/) - A track monopoint retrofit kit converts a 4" recessed housing with a medium base socket. Input Voltage: 120V Maximum Wattage: 250W Maximum Weight: 5 lbs. Finish: Black Dimension: 5" diameter - [NT-368](https://noralighting.com/product/nt-368/) - A pendant adapter allows fixtures up to 5 lbs. to be suspended and powered from the track system. Compatible Track Systems: One-Circuit and Two-Circuit Maximum Weight: 5 lbs. Finish: Black, Silver, or White Adapter: H-Style, J-Style, or L-Style - [NT-327](https://noralighting.com/product/nt-327/) - An outlet adapter allows a power outlet to be placed on the track system. Compatible Track Systems: One-Circuit and Two-Circuit Finish: Black, Silver, or White Adapter: H-Style, J-Style, or L-Style - [NT-308](https://noralighting.com/product/nt-308/) - A utility hook allows chain-hung fixtures up to 30 lbs. to be suspended from the track system. Non-electrical. Compatible Track Systems: One-Circuit and Two-Circuit Maximum Weight: 30 lbs. Finish: Black, Silver, or White Adapter: H-Style, J-Style, or L-Style - [NT-355](https://noralighting.com/product/nt-355/) - Suspends track from high ceiling applications with aircraft cable. Use one at each end of the track, and every 4′ in between. Use additional kits for additional support. Includes mounting hardware for wood, drywall, and T-Bar installations. Compatible Track Systems: One-Circuit and Two-Circuit Aircraft Length: 8' or 20' Included: 15/16" T-Bar Grid Adapter, Aircraft Cable, Anchor, and Mounting Hardware - [NT-332](https://noralighting.com/product/nt-332/) - Attaches track to 15/16" T-Bar drop ceiling. Use one at each end of track, and every 4′ in between. Use additional clips for additional support. Compatible Track Systems: One-Circuit and Two-Circuit - [NT-320](https://noralighting.com/product/nt-320/) - Outlet box cover mounts over a 4" or 3″ octagon outlet box. Can be used at any end feed, I-Connector, L-Connector, T-Connector, X-Connector, or Flexible Connector. Finish: Black, Bronze, Silver, or White Compatible Power Feeds: NT-309: Flexible Connector for One-Circuit Track NT-312: I-Connector for One-Circuit Track NT-313: L-Connector for One-Circuit Track NT-314: T-Connector for One-Circuit Track NT-315: X-Connector for One-Circuit Track NT-316: Live End for One-Circuit Track NT-2312: I-Connector for Two-Circuit Track NT-2313: L-Connector for Two-Circuit Track NT-2314: T-Connector for Two-Circuit Track NT-2315: X-Connector for Two-Circuit Track NT-2316: Live End for Two-Circuit Track - [NRA-82](https://noralighting.com/product/nra-82/) - Used to combine two 5/16" stems together and create custom stem lengths Compatible Stems: NRA-132/24: 24" Replacement Stem NRA-132/48: 48" Replacement Stem NRA-132/72: 72" Replacement Stem NRA-132/96: 96" Replacement Stem - [NT-326](https://noralighting.com/product/nt-326/) - Wire way cover allows track systems to be wired through a pendant assembly kit. For use with end feed, I-Connector, L-Connector, T-Connector, X-Connector, or Flexible Connector. Compatible Track Systems: One-Circuit and Two-Circuit Finish: Black, Silver, or White Compatible Power Feeds: NT-309: Flexible Connector for One-Circuit Track NT-312: I-Connector for One-Circuit Track NT-313: L-Connector for One-Circuit Track NT-314: T-Connector for One-Circuit Track NT-315: X-Connector for One-Circuit Track NT-316: Live End for One-Circuit Track NT-2312: I-Connector for Two-Circuit Track NT-2313: L-Connector for Two-Circuit Track NT-2314: T-Connector for Two-Circuit Track NT-2315: X-Connector for Two-Circuit Track NT-2316: Live End for Two-Circuit Track - [NRA-132/96](https://noralighting.com/product/nra-132-96/) - Replaces the existing stem included with pendant assembly kits or can be used with a sloped ceiling canopy (NT-349). Custom lengths can be created by using a coupler (NRA-82) to join two stems together. Stem Length: 96" (additional sizes are available and can be joined with a coupler) Compatible Pendant Kits: NT-305: 18" Pendant Assembly Kit NT-306: 24" Pendant Assembly Kit NT-329: 48" Pendant Assembly Kit NT-336: 36" Pendant Assembly Kit NT-372: 72" Pendant Assembly Kit NT-396: 96" Pendant Assembly Kit - [NRA-132/72](https://noralighting.com/product/nra-132-72/) - Replaces the existing stem included with pendant assembly kits or can be used with a sloped ceiling canopy (NT-349). Custom lengths can be created by using a coupler (NRA-82) to join two stems together. Stem Length: 72" (additional sizes are available and can be joined with a coupler) Compatible Pendant Kits: NT-305: 18" Pendant Assembly Kit NT-306: 24" Pendant Assembly Kit NT-329: 48" Pendant Assembly Kit NT-336: 36" Pendant Assembly Kit NT-372: 72" Pendant Assembly Kit NT-396: 96" Pendant Assembly Kit - [NRA-132/48](https://noralighting.com/product/nra-132-48/) - Replaces the existing stem included with pendant assembly kits or can be used with a sloped ceiling canopy (NT-349). Custom lengths can be created by using a coupler (NRA-82) to join two stems together. Stem Length: 48" (additional sizes are available and can be joined with a coupler) Compatible Pendant Kits: NT-305: 18" Pendant Assembly Kit NT-306: 24" Pendant Assembly Kit NT-329: 48" Pendant Assembly Kit NT-336: 36" Pendant Assembly Kit NT-372: 72" Pendant Assembly Kit NT-396: 96" Pendant Assembly Kit - [NRA-132/24](https://noralighting.com/product/nra-132-24/) - Replaces the existing stem included with pendant assembly kits or can be used with a sloped ceiling canopy (NT-349). Custom lengths can be created by using a coupler (NRA-82) to join two stems together. Stem Length: 24" (additional sizes are available and can be joined with a coupler) Compatible Pendant Kits: NT-305: 18" Pendant Assembly Kit NT-306: 24" Pendant Assembly Kit NT-329: 48" Pendant Assembly Kit NT-336: 36" Pendant Assembly Kit NT-372: 72" Pendant Assembly Kit NT-396: 96" Pendant Assembly Kit - [NT-305](https://noralighting.com/product/nt-305/) - The pendant assembly kit suspends the track from the ceiling. 4' maximum distance between pendant assembly kits. Can be used to power track system with end feed, I-Connector, L-Connector, T-Connector, X-Connector, or flexible connector with a wire way cover (NT-326). The canopy can be replaced with a sloped ceiling canopy (NT-349). Included: Canopy, stem, mounting hardware, and cover. Compatible Track Systems: One-Circuit and Two-Circuit Stem Length: 18" (replacement stems and additional sizes are available) Finish: Black, Silver, or White Compatible Power Feeds: NT-309: Flexible Connector for One-Circuit Track NT-312: I-Connector for One-Circuit Track NT-313: L-Connector for One-Circuit Track NT-314: T-Connector for One-Circuit Track NT-315: X-Connector for One-Circuit Track NT-316: Live End for One-Circuit Track NT-2312: I-Connector for Two-Circuit Track NT-2313: L-Connector for Two-Circuit Track NT-2314: T-Connector for Two-Circuit Track NT-2315: X-Connector for Two-Circuit Track NT-2316: Live End for Two-Circuit Track - [NT-329](https://noralighting.com/product/nt-329/) - The pendant assembly kit suspends the track from the ceiling. 4' maximum distance between pendant assembly kits. Can be used to power track system with end feed, I-Connector, L-Connector, T-Connector, X-Connector, or flexible connector with a wire way cover (NT-326). The canopy can be replaced with a sloped ceiling canopy (NT-349). Included: Canopy, stem, mounting hardware, and cover. Compatible Track Systems: One-Circuit and Two-Circuit Stem Length: 48" (replacement stems and additional sizes are available) Finish: Black, Silver, or White Compatible Power Feeds: NT-309: Flexible Connector for One-Circuit Track NT-312: I-Connector for One-Circuit Track NT-313: L-Connector for One-Circuit Track NT-314: T-Connector for One-Circuit Track NT-315: X-Connector for One-Circuit Track NT-316: Live End for One-Circuit Track NT-2312: I-Connector for Two-Circuit Track NT-2313: L-Connector for Two-Circuit Track NT-2314: T-Connector for Two-Circuit Track NT-2315: X-Connector for Two-Circuit Track NT-2316: Live End for Two-Circuit Track - [NT-336](https://noralighting.com/product/nt-336/) - The pendant assembly kit suspends the track from the ceiling. 4' maximum distance between pendant assembly kits. Can be used to power track system with end feed, I-Connector, L-Connector, T-Connector, X-Connector, or flexible connector with a wire way cover (NT-326). The canopy can be replaced with a sloped ceiling canopy (NT-349). Included: Canopy, stem, mounting hardware, and cover. Compatible Track Systems: One-Circuit and Two-Circuit Stem Length: 36" (replacement stems and additional sizes are available) Finish: Black, Silver, or White Compatible Power Feeds: NT-309: Flexible Connector for One-Circuit Track NT-312: I-Connector for One-Circuit Track NT-313: L-Connector for One-Circuit Track NT-314: T-Connector for One-Circuit Track NT-315: X-Connector for One-Circuit Track NT-316: Live End for One-Circuit Track NT-2312: I-Connector for Two-Circuit Track NT-2313: L-Connector for Two-Circuit Track NT-2314: T-Connector for Two-Circuit Track NT-2315: X-Connector for Two-Circuit Track NT-2316: Live End for Two-Circuit Track - [NT-396](https://noralighting.com/product/nt-396/) - The pendant assembly kit suspends the track from the ceiling. 4' maximum distance between pendant assembly kits. Can be used to power track system with end feed, I-Connector, L-Connector, T-Connector, X-Connector, or flexible connector with a wire way cover (NT-326). The canopy can be replaced with a sloped ceiling canopy (NT-349). Included: Canopy, stem, mounting hardware, and cover. Compatible Track Systems: One-Circuit and Two-Circuit Stem Length: 96" (replacement stems and additional sizes are available) Finish: Black, Silver, or White Compatible Power Feeds: NT-309: Flexible Connector for One-Circuit Track NT-312: I-Connector for One-Circuit Track NT-313: L-Connector for One-Circuit Track NT-314: T-Connector for One-Circuit Track NT-315: X-Connector for One-Circuit Track NT-316: Live End for One-Circuit Track NT-2312: I-Connector for Two-Circuit Track NT-2313: L-Connector for Two-Circuit Track NT-2314: T-Connector for Two-Circuit Track NT-2315: X-Connector for Two-Circuit Track NT-2316: Live End for Two-Circuit Track - [NT-372](https://noralighting.com/product/nt-372/) - The pendant assembly kit suspends the track from the ceiling. 4' maximum distance between pendant assembly kits. Can be used to power track system with end feed, I-Connector, L-Connector, T-Connector, X-Connector, or flexible connector with a wire way cover (NT-326). The canopy can be replaced with a sloped ceiling canopy (NT-349). Included: Canopy, stem, mounting hardware, and cover. Compatible Track Systems: One-Circuit and Two-Circuit Stem Length: 72" (replacement stems and additional sizes are available) Finish: Black, Silver, or White Compatible Power Feeds: NT-309: Flexible Connector for One-Circuit Track NT-312: I-Connector for One-Circuit Track NT-313: L-Connector for One-Circuit Track NT-314: T-Connector for One-Circuit Track NT-315: X-Connector for One-Circuit Track NT-316: Live End for One-Circuit Track NT-2312: I-Connector for Two-Circuit Track NT-2313: L-Connector for Two-Circuit Track NT-2314: T-Connector for Two-Circuit Track NT-2315: X-Connector for Two-Circuit Track NT-2316: Live End for Two-Circuit Track - [NT-306](https://noralighting.com/product/nt-306/) - The pendant assembly kit suspends the track from the ceiling. 4' maximum distance between pendant assembly kits. Can be used to power track system with end feed, I-Connector, L-Connector, T-Connector, X-Connector, or flexible connector with a wire way cover (NT-326). The canopy can be replaced with a sloped ceiling canopy (NT-349). Included: Canopy, stem, mounting hardware, and cover. Compatible Track Systems: One-Circuit and Two-Circuit Stem Length: 24" (replacement stems and additional sizes are available) Finish: Black, Silver, or White Compatible Power Feeds: NT-309: Flexible Connector for One-Circuit Track NT-312: I-Connector for One-Circuit Track NT-313: L-Connector for One-Circuit Track NT-314: T-Connector for One-Circuit Track NT-315: X-Connector for One-Circuit Track NT-316: Live End for One-Circuit Track NT-2312: I-Connector for Two-Circuit Track NT-2313: L-Connector for Two-Circuit Track NT-2314: T-Connector for Two-Circuit Track NT-2315: X-Connector for Two-Circuit Track NT-2316: Live End for Two-Circuit Track - [NT-349](https://noralighting.com/product/nt-349/) - The sloped ceiling canopy is used to replace the canopy included with pendant assembly kits. The canopy mounts over a 4" or 3" octagonal outlet box, and the stem adjusts from up to 90 °. Use one at each end of the track, and every 4' in between. Can be used to power a track system with end feed, i connector, l connector, t connector, x connector, or flexible connector with a wire way cover (NT-326). Not recommended for wall mounting. Compatible Track Systems: One-Circuit and Two-Circuit Finish: Black, Silver, or White Compatible Pendant Kits: NT-305: 18" Pendant Assembly Kit NT-306: 24" Pendant Assembly Kit NT-336: 36" Pendant Assembly Kit NT-329: 48" Pendant Assembly Kit NT-372: 72" Pendant Assembly Kit NT-396: 96" Pendant Assembly Kit - [NT-2318](https://noralighting.com/product/nt-2318/) - Dead end cap is used to cover the end of a track section. Note: Two dead end caps are included with each track section. Compatible Track System: Two-Circuit Polarity: Left or Right Polarity Finish: Black, Silver, or White - [NT-318](https://noralighting.com/product/nt-318/) - Dead end cap is used to cover the end of a track section. Note: Two dead end caps are included with each track section. Compatible Track System: One-Circuit Finish: Black, Silver, or White - [NT-315](https://noralighting.com/product/nt-315/) - X-Connector is used to connect four track sections together. Can also be used as a power feed for track system. Compatible Track System: One-Circuit Polarity: Right Polarity Input Voltage: 120V Maximum Wattage: 2400W Dimming: Triac or ELV Finish: Black, Silver, or White - [NT-2315](https://noralighting.com/product/nt-2315/) - X-Connector is used to connect four track sections together. Can also be used as a power feed for track system. Compatible Track System: Two-Circuit Polarity: Right Polarity Input Voltage: 120V Maximum Wattage: 2400W per circuit Dimming: Triac or ELV Finish: Black, Silver, or White - [NT-313](https://noralighting.com/product/nt-313/) - L-Connector is used to connect two pieces of track together in a right angle and carry the electricity. Can be used as a power feed with one knockout. Can be adjusted to accommodate left and right polarity. Includes “I” Connector cover to convert into a Straight Connector. Compatible Track System: One-Circuit Polarity: Right Polarity Input Voltage: 120V Maximum Wattage: 2400W Dimming: Triac or ELV Finish: Black, Bronze, Silver, or White - [NT-2313](https://noralighting.com/product/nt-2313/) - L-Connector is used to connect two pieces of track together in a right angle and carry the electricity. Can be used as a power feed with one knockout. Can be adjusted to accommodate left and right polarity. Includes “I” Connector cover to convert into a Straight Connector. Compatible Track System: Two-Circuit Polarity: Right Polarity Input Voltage: 120V Maximum Wattage: 2400W per circuit Dimming: Triac or ELV Finish: Black, Silver, or White - [NT-312](https://noralighting.com/product/nt-312/) - I-Connector is used to connect two pieces of track together and carry the electricity. Can be used as a power feed with one knockout. Compatible Track System: One-Circuit Polarity: Right Polarity Input Voltage: 120V Maximum Wattage: 2400W Dimming: Triac or ELV Finish: Black, Silver, or White - [NT-2312](https://noralighting.com/product/nt-2312/) - I-Connector is used to connect two pieces of track together and carry the electricity. Can be used as a power feed with one knockout. Compatible Track System: Two-Circuit Polarity: Right Polarity Input Voltage: 120V Maximum Wattage: 2400W per circuit Dimming: Triac or ELV Finish: Black, Silver, or White - [NT-314](https://noralighting.com/product/nt-314/) - T-Connector is used to connect three track sections together. Can also be used as a power feed for track system. Compatible Track System: One-Circuit Polarity: Left or Right Polarity Input Voltage: 120V Maximum Wattage: 2400W Dimming: Triac or ELV Finish: Black, Silver, or White - [NT-2314](https://noralighting.com/product/nt-2314/) - T-Connector is used to connect three track sections together. Can also be used as a power feed for track system. Compatible Track System: Two-Circuit Polarity: Left or Right Polarity Input Voltage: 120V Maximum Wattage: 2400W per circuit Dimming: Triac or ELV Finish: Black, Silver, or White - [NT-309](https://noralighting.com/product/nt-309/) - A flexible connector is used to connect two pieces of track and carry electricity for any angle between 0 ° and 90 °, allowing for horizontal or vertical movement. Can be used as a power feed with two knockouts. Compatible Track System: One-Circuit Finish: Black, Silver, or White - [NT-2310](https://noralighting.com/product/nt-2310/) - Straight Connector is used to connect two pieces of track and carry electricity. Cannot be used as a power feed. Compatible Track System: Two-Circuit Finish: Black, Silver, or White - [NT-310](https://noralighting.com/product/nt-310/) - Straight Connector is used to connect two pieces of track and carry electricity. Cannot be used as a power feed. Compatible Track System: One-Circuit Finish: Black, Bronze, Silver, or White - [NT-328](https://noralighting.com/product/nt-328/) - Live end feed powers the track system from the end of a run. End knockout accepts 1/2" trade size conduit fitting. Left polarity end feeds can be used at the end of powered run to continue "or jump" to another track run. Compatible Track System: One-Circuit Polarity: Left or Right Polarity Input Voltage: 120V Maximum Wattage: 2400W Dimming: Triac or ELV Finish: Black, Silver, or White - [NT-2311](https://noralighting.com/product/nt-2311/) - Live end feed with cover to mount over a 4" or 3" octagon outlet box. Live end powers the track system from the end of a run. Bottom knockout allows direct feed with electrical connector. Compatible Track System: Two-Circuit Polarity: Right Polarity Input Voltage: 120V Maximum Wattage: 2400W per circuit Dimming: Triac or ELV Finish: Black, Silver, or White - [NT-2328](https://noralighting.com/product/nt-2328/) - Live end feed powers the track system from the end of a run. End knockout accepts 1/2" trade size conduit fitting. Left polarity end feeds can be used at the end of powered run to continue "or jump" to another track run. Compatible Track System: Two-Circuit Polarity: Left or Right Polarity Input Voltage: 120V Maximum Wattage: 2400W per circuit Dimming: Triac or ELV Finish: Black, Silver, or White - [NT-321](https://noralighting.com/product/nt-321/) - Live end feed powers the track system from the end of a run. Pre-wired to 12' 10A cord and plug with ground. Compatible Track System: One-Circuit Polarity: Right Polarity Input Voltage: 120V Maximum Wattage: 1200W Finish: Black, Silver, or White - [NT-307](https://noralighting.com/product/nt-307/) - Floating canopy feed connects the track to an existing outlet box anywhere along the track. Mounts to a 4" or 3" octagon junction box, mounting hardware included. Compatible Track System: One-Circuit Input Voltage: 120V Maximum Wattage: 2400W Dimming: Triac or ELV Finish: Black, Bronze, Silver, or White - [NT-2307](https://noralighting.com/product/nt-2307/) - Floating canopy feed connects the track to an existing outlet box anywhere along the track. Mounts to a 4" or 3" octagon junction box, mounting hardware included. Compatible Track System: Two-Circuit Input Voltage: 120V Maximum Wattage: 2400W per circuit Dimming: Triac or ELV Finish: Black, Silver, or White - [NT-2352](https://noralighting.com/product/nt-2352/) - Live end feed with canopy to mount over a 4" or 3" octagon outlet box. Molded canopy and live end feed are one unit and powers the track system. Bottom knockout allows direct feed with electrical connector. Compatible Track System: Two-Circuit Polarity: Right Polarity Input Voltage: 120V Maximum Wattage: 2400W per circuit Dimming: Triac or ELV Finish: Black, Silver, or White - [NT-352](https://noralighting.com/product/nt-352/) - Live end feed with canopy to mount over a 4" or 3" octagon outlet box. Molded canopy and live end feed are one unit and powers the track system. Bottom knockout allows direct feed with electrical connector. Compatible Track System: One-Circuit Polarity: Right Polarity Input Voltage: 120V Maximum Wattage: 2400W Dimming: Triac or ELV Finish: Black, Bronze, Silver, or White - [NT-311](https://noralighting.com/product/nt-311/) - Live end feed with cover to mount over a 4" or 3" octagon outlet box. Live end powers the track system from the end of a run. Bottom knockout allows direct feed with electrical connector. Compatible Track System: One-Circuit Polarity: Right Polarity Input Voltage: 120V Maximum Wattage: 2400W Dimming: Triac or ELV Finish: Black, Silver, or White - [NT-2316](https://noralighting.com/product/nt-2316/) - Two-Circuit live end feed powers track system from the end of a run. Bottom knockout allows direct feed with electrical connector. Left polarity end feeds can be used at the end of powered run to continue "or jump" to another track run. Compatible Track System: Two-Circuit Polarity: Right Polarity (standard) or Left Polarity (/L) Input Voltage: 120V Maximum Wattage: 2400W per circuit Dimming: Triac or ELV Finish: Black, Silver, or White - [NT-316](https://noralighting.com/product/nt-316/) - One-Circuit live end feed powers track system from the end of a run. Bottom knockout allows direct feed with electrical connector. Left polarity end feeds can be used at the end of powered run to continue "or jump" to another track run. Compatible Track System: One-Circuit Polarity: Right Polarity (standard) or Left Polarity (/L) Input Voltage: 120V Maximum Wattage: 2400W Dimming: Triac or ELV Finish: Black, Bronze, Silver, or White - [NTRT-18](https://noralighting.com/product/ntrt-18/) - Dead end recessed housing for use with Nora Dead Ends. The extruded aluminum housing is mounted into the ceiling cavity which allows for flush installation of the track system to any style of ceiling. Compatible Straight Connectors: NT-318: Dead End for One-Circuit Track NT-2318: Dead End for Two-Circuit Track Finish: Black or White - [NTRT-15](https://noralighting.com/product/ntrt-15/) - X-Connector recessed housing for use with Nora X-Connectors. The extruded aluminum housing is mounted into the ceiling cavity which allows for flush installation of the track system to any style of ceiling. Compatible X-Connectors: NT-315: X-Connector for One-Circuit Track NT-2315: X-Connector for Two-Circuit Track Finish: Black or White - [NTRT-14](https://noralighting.com/product/ntrt-14/) - T-Connector recessed housing for use with Nora T-Connectors. The extruded aluminum housing is mounted into the ceiling cavity which allows for flush installation of the track system to any style of ceiling. Compatible T-Connectors: NT-314: T-Connector for One-Circuit Track NT-2314: T-Connector for Two-Circuit Track Finish: Black or White - [NTRT-10](https://noralighting.com/product/ntrt-10/) - Straight connector recessed housing for use with Nora Straight Connectors. The extruded aluminum housing is mounted into the ceiling cavity which allows for flush installation of the track system to any style of ceiling. Compatible Straight Connectors: NT-312: Straight Connector for One-Circuit Track NT-2312: Straight Connector for Two-Circuit Track Finish: Black or White - [NTRT-13](https://noralighting.com/product/ntrt-13/) - L-Connector recessed housing for use with Nora L-Connectors. The extruded aluminum housing is mounted into the ceiling cavity which allows for flush installation of the track system to any style of ceiling. Compatible L-Connectors: NT-313: L-Connector for One-Circuit Track NT-2313: L-Connector for Two-Circuit Track Finish: Black or White - [NTRT-16](https://noralighting.com/product/ntrt-16/) - End feed recessed housing for use with Nora Live End Feeds. The extruded aluminum housing is mounted into the ceiling cavity which allows for flush installation of the track system to any style of ceiling. Compatible Track Live End Feeds: NT-311: Live End Feed for One-Circuit Track NT-2311: Live End Feed for Two-Circuit Track Finish: Black or White - [NTRT-8](https://noralighting.com/product/ntrt-8/) - Recessed track housing is designed for use with Nora track systems. The extruded aluminum housing is mounted into the ceiling cavity which allows for flush installation of the track system to any style of ceiling. Compatible Track System: NT-304: 8' One-Circuit Track NT-2304: 8' Two-Circuit Track Finish: Black or White - [NTRT-4](https://noralighting.com/product/ntrt-4/) - Recessed track housing is designed for use with Nora track systems. The extruded aluminum housing is mounted into the ceiling cavity which allows for flush installation of the track system to any style of ceiling. Compatible Track System: NT-302: 4' One-Circuit Track NT-2302: 4' Two-Circuit Track Finish: Black or White - [NT-331K](https://noralighting.com/product/nt-331k/) - 12' One-circuit track kit with miniature size and push in connector provides versatility for every lighting application. The system is designed and engineered for safety and easy installation. SPECIFICATIONS: Save money on freight shipping costs Miniature extruded aluminum channel Push-in connectors Solid, 12-gauge copper conductors in PVC insulators Separate, full-length ground conductor Compatible with most common 3-wire systems Visual polarity groove indicates proper electrical installation Size is only 11/16" high X 1-7/16" wide Can be field cut to the desired length Input Voltage: 120V Maximum Wattage: 2400W Finish: Black, Silver, or White Included: (2) 6′ One-Circuit Tracks, (1) Straight Connector, (1) End Cap, and Mounting Hardware - [NT-331](https://noralighting.com/product/nt-331/) - Nora Lighting's one circuit track system with miniature size and push in connector provides versatility for every lighting application. The system is designed and engineered for safety and easy installation. SPECIFICATIONS: Miniature extruded aluminum channel Push-in connectors Solid, 12-gauge copper conductors in PVC insulators Separate, full-length ground conductor Compatible with most common 3-wire systems Visual polarity groove indicates proper electrical installation Size is only 11/16" high X 1-7/16" wide Can be field-cut to the desired length Length: 144.25in Input Voltage: 120V Maximum Wattage: 2400W Finish: Black, Silver, or White Included: End Caps and Mounting Hardware - [NT-304](https://noralighting.com/product/nt-304/) - Nora Lighting's one circuit track system with miniature size and push in connector provides versatility for every lighting application. The system is designed and engineered for safety and easy installation. SPECIFICATIONS: Miniature extruded aluminum channel Push-in connectors Solid, 12-gauge copper conductors in PVC insulators Separate, full-length ground conductor Compatible with most common 3-wire systems Visual polarity groove indicates proper electrical installation Size is only 11/16" high X 1-7/16" wide Can be field-cut to the desired length Length: 92.375in Input Voltage: 120V Maximum Wattage: 2400W Finish: Black, Bronze, Silver, or White Included: End Caps and Mounting Hardware - [NT-303](https://noralighting.com/product/nt-303/) - Nora Lighting's one circuit track system with miniature size and push in connector provides versatility for every lighting application. The system is designed and engineered for safety and easy installation. SPECIFICATIONS: Miniature extruded aluminum channel Push-in connectors Solid, 12-gauge copper conductors in PVC insulators Separate, full-length ground conductor Compatible with most common 3-wire systems Visual polarity groove indicates proper electrical installation Size is only 11/16" high X 1-7/16" wide Can be field-cut to the desired length Length: 72.25in Input Voltage: 120V Maximum Wattage: 2400W Finish: Black, Natural Metal, Silver, or White Included: End Caps and Mounting Hardware - [NT-2301](https://noralighting.com/product/nt-2301/) - Nora Lighting's two-circuit track system provides versatility for every lighting need. Miniature size, push-in connectors, and contemporary finishes all combine to make the two-circuit Nora track perfect for residential or commercial use. This track system is ideal for single or double switching, allowing greater control of intermittent illumination. SPECIFICATIONS: Miniature extruded aluminum channel Push-in connectors Solid, 12-gauge copper conductors in PVC insulators Separate, full-length ground conductor Compatible with most common 2-circuit, 4-wire systems Rated for double capacity (4800 watts) Ideal for single or double switching Visual polarity groove indicates proper electrical installation Size is only 5/8" high X 1-3/8" wide Can be field-cut to the desired length Length: 24.25in Input Voltage: 120V Maximum Wattage: 4800W (2400W per circuit) Finish: Black, Silver, or White Included: End Caps and Mounting Hardware - [NT-335](https://noralighting.com/product/nt-335/) - Sloped track adapter is used to extend track head on a sloped ceiling. Compatible Track Systems: J-Style Compatible Track Heads: H-Style Finish: Black or White - [NT-333](https://noralighting.com/product/nt-333/) - Sloped track adapter is used to extend track head on a sloped ceiling. Compatible Track Systems: One-Circuit and Two-Circuit Compatible Track Heads: H-Style Finish: Black, Silver, or White - [NT-334](https://noralighting.com/product/nt-334/) - Sloped track adapter is used to extend track head on a sloped ceiling. Compatible Track Systems: H-Style Compatible Track Heads: J-Style Finish: Black, Silver, or White - [NT-351](https://noralighting.com/product/nt-351/) - Concentrates beam to produce well-defined round spot of light. Includes four round beam templates for choice of beam size. For use with MR16 flood lamp. Finish: Black Compatible Track Head: NTH-695: Telescope Line Voltage MR16 GU10 Track Fixture - [NT-340](https://noralighting.com/product/nt-340/) - Adjustable barn door accessory can be added to BR40/PAR38 track heads. Barn doors can hold (1) louver louver or 5-9/16" glass filter (by others) Finish: Black or White Compatible Accessory: NT-343: BR40/PAR38 Louver Compatible Track Heads: NTH-131: Roundback Cylinder with Black Baffle NTH-150: Shroud - [NT-337](https://noralighting.com/product/nt-337/) - Square canopy mounts over a 4" or 3″ octagon outlet box. Input Voltage: 120V Finish: Black, Silver, or White Compatible Track Heads: NTL-205: Hi-Tech Low Voltage Track Fixture with 50W Integral Electronic Transformer NTL-207: Gimbal Ring Low Voltage Track Fixture with 50W Integral Electronic Transformer NTL-208: Barn Door Low Voltage Track Fixture with 50W Integral Electronic Transformer NTL-210: Clasp Low Voltage Track Fixture with 50W Integral Electronic Transformer NTL-213: Wireback Low Voltage Track Fixture with 50W Integral Electronic Transformer NTL-215/75: Telescope Low Voltage Track Fixture with 75W Integral Electronic Transformer NTL-250: AR111 Sail™ Low Voltage Track Fixture with 50W Integral Electronic Transformer - [NT-2304](https://noralighting.com/product/nt-2304/) - Nora Lighting's two-circuit track system provides versatility for every lighting need. Miniature size, push in connectors contemporary finishes all combine to make two-circuit Nora track perfect for residential or commercial use. This track system is ideal for single or double switching, allowing greater control of intermittent illumination. SPECIFICATIONS: Miniature extruded aluminum channel Push-in connectors Solid, 12-gauge copper conductors in PVC insulators Separate, full-length ground conductor Compatible with most common 2-circuit, 4-wire systems Rated for double capacity (4800 watts) Ideal for single or double switching Visual polarity groove indicates proper electrical installation Size is only 5/8" high X 1-3/8" wide Can be field-cut to the desired length Length: 92.375in Input Voltage: 120V Maximum Wattage: 4800W (2400W per circuit) Finish: Black, Silver, or White Included: End Cap and Mounting Hardware - [NT-2303](https://noralighting.com/product/nt-2303/) - Nora Lighting's two-circuit track system provides versatility for every lighting need. Miniature size, push in connectors contemporary finishes all combine to make two-circuit Nora track perfect for residential or commercial use. This track system is ideal for single or double switching, allowing greater control of intermittent illumination. SPECIFICATIONS: Miniature extruded aluminum channel Push-in connectors Solid, 12-gauge copper conductors in PVC insulators Separate, full-length ground conductor Compatible with most common 2-circuit, 4-wire systems Rated for double capacity (4800 watts) Ideal for single or double switching Visual polarity groove indicates proper electrical installation Size is only 5/8" high X 1-3/8" wide Can be field-cut to the desired length Length: 72.25in Input Voltage: 120V Maximum Wattage: 4800W (2400W per circuit) Finish: Black, Silver, or White Included: End Cap and Mounting Hardware - [NT-2302](https://noralighting.com/product/nt-2302/) - Nora Lighting's two-circuit track system provides versatility for every lighting need. Miniature size, push in connectors contemporary finishes all combine to make two-circuit Nora track perfect for residential or commercial use. This track system is ideal for single or double switching, allowing greater control of intermittent illumination. SPECIFICATIONS: Miniature extruded aluminum channel Push-in connectors Solid, 12-gauge copper conductors in PVC insulators Separate, full-length ground conductor Compatible with most common 2-circuit, 4-wire systems Rated for double capacity (4800 watts) Ideal for single or double switching Visual polarity groove indicates proper electrical installation Size is only 5/8" high X 1-3/8" wide Can be field-cut to the desired length Length: 48.25in Input Voltage: 120V Maximum Wattage: 4800W (2400W per circuit) Finish: Black, Silver, or White Included: End Cap and Mounting Hardware - [NT-2331K](https://noralighting.com/product/nt-2331k/) - 12' Two-circuit track kit provides versatility for every lighting need. Miniature size, push-in connectors, and contemporary finishes all combine to make the two-circuit Nora track perfect for residential or commercial use. This track system is ideal for single or double switching, allowing greater control of intermittent illumination. SPECIFICATIONS: Save money on freight shipping costs Miniature extruded aluminum channel Push-in connectors Solid, 12-gauge copper conductors in PVC insulators Separate, full-length ground conductor Compatible with most common 2-circuit, 4-wire systems Rated for double capacity (4800 watts) Ideal for single or double switching Visual polarity groove indicates proper electrical installation Size is only 5/8" high X 1-3/8" wide Can be field-cut to the desired length Input Voltage: 120V Maximum Wattage: 4800W (2400W per circuit) Finish: Black, Silver, or White Included: (2) 6' Two-Circuit Tracks, (1) Straight Connector, (1) End Cap, and Mounting Hardware - [NTEC-880330](https://noralighting.com/product/ntec-880330/) - ** While Supplies Last ** The Dipper provides an even wash off light using energy efficient LEDs. The indirect reflective design eliminates diode image for excellent visual comfort. Features Can be used as an indirect luminaire or wall wash Available in two lengths (8" or 12") 3000K, 3500K or 4000K @ 90 CRI Available in black, silver and white finishes 5-year limited warranty Size: 12" Width x 7-3/4" Height Finish: Black, Silver or White Input Voltage: 120-277V Lumens / Wattage: 2300lm / 30W Color Rendering Index: 90+ CRI Color Temperature: 3000K, 3500K or 4000K Dimming: Triac or ELV - [NTEC-880315](https://noralighting.com/product/ntec-880315/) - ** While Supplies Last ** The Dipper provides an even wash off light using energy efficient LEDs. The indirect reflective design eliminates diode image for excellent visual comfort. Features Can be used as an indirect luminaire or wall wash Available in two lengths (8" or 12") 3000K, 3500K or 4000K @ 90 CRI Available in black, silver and white finishes 5-year limited warranty Size: 8" Width x 7-3/4" Height Finish: Black, Silver or White Input Voltage: 120-277V Lumens / Wattage: 1000lm / 15W Color Rendering Index: 90+ CRI Color Temperature: 3000K, 3500K or 4000K Dimming: Triac or ELV - [NTE-880330](https://noralighting.com/product/nte-880330/) - ** While Supplies Last ** The Dipper provides an even wash off light using energy efficient LEDs. The indirect reflective design eliminates diode image for excellent visual comfort. Features Can be used as an indirect luminaire or wall wash Available in two lengths (8" or 12") 5-year limited warranty Adjustability: 355° horizontal and 135° vertical rotation Finish: Black or Silver Lumens / Wattage: 2300lm / 30W Color Rendering Index: 90+ CRI Color Temperature: 3000K or 3500K Dimming: Triac or ELV Accessories: NT-380: Round Monopoint Canopy - [NTE-855](https://noralighting.com/product/nte-855/) - ** While Supplies Last ** Small scale, Jason LED Cylinder Track Fixture delivering up to 2800 lumens. Constructed of extruded and machined aluminum, the heat-sink and integrated driver housing provide a sleek and modern look, designed to quietly compliment any space. Dimming is standard and allows smooth illumination down to 10% precision adjustment. 315º aiming horizontal rotation, 90º vertical rotation. Integral on/off switch and track polarity indicator are standard Adjustability: 315° horizontal and 90° vertical rotation Lumens: 1400lm or 2800lm CRI: 80 or 90 Beam Spread: 24° Spot, 40° Narrow Flood or 60° Flood Color Temperature: 3000K, 3500K or 4000K Dimming: Triac or ELV Accessories: NTE-855BD: Barn Door NTE-855SN: Snoot NTE-855SNWW: Directional Shield NTE-855HC: Honeycomb Louver NTE-855FG: Frosted Glass NT-380: Round Monopoint Canopy - [NTE-880315](https://noralighting.com/product/nte-880315/) - ** While Supplies Last ** The Dipper provides an even wash off light using energy efficient LEDs. The indirect reflective design eliminates diode image for excellent visual comfort. Features Can be used as an indirect luminaire or wall wash Available in two lengths (8" or 12") 3000K, 3500K or 4000K @ 90 CRI Available in black, silver and white finishes 5-year limited warranty Adjustability: 355° horizontal and 135° vertical rotation Finish: Black, Silver or White Lumens / Wattage: 1000lm / 15W Color Rendering Index: 90+ CRI Color Temperature: 3000K, 3500K or 4000K Dimming: Triac or ELV Accessories: NT-380: Round Monopoint Canopy - [NTH-131](https://noralighting.com/product/nth-131/) - Line voltage cylindrical housing with round back design and black baffle. Includes a yoke that provides full adjustment of light source for special aiming and has dual tightening knobs assure secure lock on angle position. Lamp: BR40/PAR38 Finish: Black or White Track Adapter: Standard "H" Style, "J" Style or "L" Style Optional Accessories: NT-340: BR40/PAR38 Black Barn Door NT-343: BR40/PAR38 Black Louver (Requires NT-340 or NT-346) NT-346: BR40/PAR38 Black Accessory Holder - [NLCBC-6OR](https://noralighting.com/product/nlcbc-6or/) - 6" Round oversized ring covers ceiling cut-outs up to 8" Outside Diameter: 8.5" Ring Finishes: NLCBC-6OR-B = Black NLCBC-6OR-BZ = Bronze NLCBC-6OR-MPW = Matte Powder White NLCBC-6OR-W = White Compatible Downlights: NLCBC2-651 = 6" Cobalt Click Round Reflector NLCBC2-652 = 6" Cobalt Click Round Baffle NLCB2-651 = 6" Cobalt High Lumen Round Reflector NLCB2-652 = 6" Cobalt High Lumen Round Baffle NLCBC-669 = 6" Cobalt Adjustable Retrofit - [NLOPAC-R7MSTW](https://noralighting.com/product/nlopac-r7mstw/) - The AC Opal Motion Sensor LED Series is designed to surface mount over a standard junction box. The low-profile luminaire produces even illumination and the integral PIR sensor activates when motion is detected. After one minute of no motion, the fixture automatically turns off. Features: Surface mounts to most standard junction boxes Five color temperatures in each fixture PIR (passive infrared) motion sensor for easy on/off operation PIR sensor can detect motion up to 16' diameter pattern at 8' mounting height Surface mounted or retrofit into an existing recessed housing with torsion spring kit (ordered separately) Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Lumens / Wattage: 950lm / 14W Color Temperature: Selectable CCT (2700K/3000K/3500K/4000K/5000K) Color Rendering Index: 90+ CRI Finish: White Optional Accessories: NLOPAC-4BKT-2: Universal Bracket for 3" Junction Boxes NLOPAC-R6TWRECKIT: Retrofit Kit for 5" and 6" Recessed Housings - [NLOPAC-56RECKIT-2](https://noralighting.com/product/nlopac-56reckit-2/) - This is a torsion spring kit for mounting disk lights to 5" or 6" recessed housings. It allows surface-mount luminaires to retrofit existing installations. Compatible Luminaires: NCSD-R630 = 6" Contractor Series Disk Light with 3000K, 12-Pack NCSD-R6TW = 6" Contractor Series Disk Light with Selectable CCT, 12-Pack NLOPAC-R6REGT24 = 6" Regressed AC Opal with Dedicated CCT NLOPAC-R6509T24 = 6" Title 24 AC Opal with Dedicated CCT NLOPAC2-R6509T24 = 6" Title 24 AC Opal 2 with Dedicated CCT NLOPAC-R6T24 = 6" Title 24 AC Opal with Dedicated CCT NLOPAC-R6509 = 6" AC Opal with Dedicated CCT NLOPAC-R7MS = 7" AC Opal with Motion Sensor NLOPAC-R8T24 = 8" Title 24 AC Opal with Dedicated CCT - [NHRMIC3-6](https://noralighting.com/product/nhrmic3-6/) - Dedicated air-tight remodel housing for Marquise III LED downlights. Clearance: “IC” Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam insulation. Input Voltage: 120V or 120-277V Lumens / Wattage: Up to 1500lm / 16W Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Trims: NRM3-61: 6" Open Reflector NRM3-62: 6" Baffle NRM3-64: 6" Surface Adjustable NRM3-67: 6" Adjustable Regressed Baffle NRM3-68: 6" Open Reflector for Decorative Glass NRM3-69: 6" Adjustable Regressed Reflector - [NHRM3-6](https://noralighting.com/product/nhrm3-6/) - Dedicated air-tight remodel housing for Marquise III LED downlights. Clearance: Non-IC housings require a minimum clearance of 3” from thermal insulation and 1/2” from adjacent building components. Input Voltage: 120V or 120-277V Lumens / Wattage: Up to 2500lm / 26W Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Trims: NRM3-61: 6" Open Reflector NRM3-62: 6" Baffle NRM3-64: 6" Surface Adjustable NRM3-67: 6" Adjustable Regressed Baffle NRM3-68: 6" Open Reflector for Decorative Glass NRM3-69: 6" Adjustable Regressed Reflector - [NHMICD3-6](https://noralighting.com/product/nhmicd3-6/) - Dedicated new construction housing for use in insulated ceilings can be in direct contact with thermal insulation. Air-tight construction provides energy savings by reducing the flow of air through the ceiling. Clearance: “IC” Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam insulation. Input Voltage: 120V or 120-277V Lumens / Wattage: Up to 2500lm / 24W Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Trims: NRM3-61: 6" Open Reflector NRM3-62: 6" Baffle NRM3-64: 6" Surface Adjustable NRM3-67: 6" Adjustable Regressed Baffle NRM3-68: 6" Open Reflector for Decorative Glass NRM3-69: 6" Adjustable Regressed Reflector - [NHRMIC3-5](https://noralighting.com/product/nhrmic3-5/) - Dedicated air-tight remodel housing for Marquise III LED downlights. Clearance: “IC” Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam insulation. Input Voltage: 120V or 120-277V Lumens / Wattage: Up to 1500lm / 16W Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Trims: NRM3-51: 5" Open Reflector NRM3-52: 5" Baffle NRM3-54: 5" Surface Adjustable NRM3-57: 5" Adjustable Regressed Baffle NRM3-58: 5" Open Reflector for Decorative Glass NRM3-59: 5" Adjustable Regressed Reflector - [NHRM3-5](https://noralighting.com/product/nhrm3-5/) - Dedicated air-tight remodel housing for Marquise III LED downlights. Clearance: Non-IC housings require a minimum clearance of 3” from thermal insulation and 1/2” from adjacent building components. Input Voltage: 120V or 120-277V Lumens / Wattage: Up to 2500lm / 26W Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Trims: NRM3-51: 5" Open Reflector NRM3-52: 5" Baffle NRM3-54: 5" Surface Adjustable NRM3-57: 5" Adjustable Regressed Baffle NRM3-58: 5" Open Reflector for Decorative Glass NRM3-59: 5" Adjustable Regressed Reflector - [NHMIC3-5](https://noralighting.com/product/nhmic3-5/) - Dedicated air-tight remodel housing for Marquise III LED downlights. Clearance: “IC” Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam insulation. Input Voltage: 120V or 120-277V Lumens / Wattage: Up to 1500lm / 16W Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Trims: NRM3-51: 5" Open Reflector NRM3-52: 5" Baffle NRM3-54: 5" Surface Adjustable NRM3-57: 5" Adjustable Regressed Baffle NRM3-58: 5" Open Reflector for Decorative Glass NRM3-59: 5" Adjustable Regressed Reflector - [NHM3-5](https://noralighting.com/product/nhm3-5/) - Dedicated air-tight new construction housing for Marquise III LED downlights. Clearance: Non-IC housings require a minimum clearance of 3” from thermal insulation and 1/2” from adjacent building components. Input Voltage: 120V or 120-277V Lumens / Wattage: Up to 2500lm / 26W Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Trims: NRM3-51: 5" Open Reflector NRM3-52: 5" Baffle NRM3-54: 5" Surface Adjustable NRM3-57: 5" Adjustable Regressed Baffle NRM3-58: 5" Open Reflector for Decorative Glass NRM3-59: 5" Adjustable Regressed Reflector - [NHMICD3-4](https://noralighting.com/product/nhmicd3-4/) - Dedicated new construction housing for use in insulated ceilings can be in direct contact with thermal insulation. Air-tight construction provides energy savings by reducing the flow of air through the ceiling. Clearance: “IC” Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam insulation. Input Voltage: 120V or 120-277V Lumens / Wattage: Up to 2500lm / 24W Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Trims: NRM3-41: 4" Round Reflector NRM3-42: 4" Round Baffle NRM3-43: 4" Square Reflector - [NHRMIC3-4](https://noralighting.com/product/nhrmic3-4/) - Dedicated air-tight remodel housing for Marquise III LED downlights. Clearance: “IC” Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam insulation. Input Voltage: 120V or 120-277V Lumens / Wattage: Up to 1500lm / 16W Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Trims: NRM3-41: 4" Round Reflector NRM3-42: 4" Round Baffle NRM3-43: 4" Square Reflector - [NRM3-69](https://noralighting.com/product/nrm3-69/) - Marquise III COB Series enhances an established series of downlighting with the latest COB technology by Signify®. The COB allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. Lumens / Wattage: Up to 2500lm / 26W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Compatible Housings: The reflector is only compatible with Marquise III housings manufactured by Nora Lighting. NHM3-6 (6" Non-IC New Construction) NHRM3-6 (6" Non-IC Remodel) NHMIC3-6 (6" IC New Construction) NHMICD3-6 (6" Double Wall IC New Construction) NHRMIC3-6 (6" IC Remodel) Listing: – cULus Listed for Damp Location when used with compatible housing – 5-Year Limited Warranty - [NRM3-67](https://noralighting.com/product/nrm3-67/) - Marquise III COB Series enhances an established series of downlighting with the latest COB technology by Signify®. The COB allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. Lumens / Wattage: Up to 2500lm / 26W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Compatible Housings: The reflector is only compatible with Marquise III housings manufactured by Nora Lighting. NHM3-6 (6" Non-IC New Construction) NHRM3-6 (6" Non-IC Remodel) NHMIC3-6 (6" IC New Construction) NHMICD3-6 (6" Double Wall IC New Construction) NHRMIC3-6 (6" IC Remodel) Listing: – cULus Listed for Damp Location when used with compatible housing – 5-Year Limited Warranty - [NRM3-64](https://noralighting.com/product/nrm3-64/) - Marquise III COB Series enhances an established series of downlighting with the latest COB technology by Signify®. The COB allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. Lumens / Wattage: Up to 2500lm / 26W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Compatible Housings: The reflector is only compatible with Marquise III housings manufactured by Nora Lighting. NHM3-6 (6" Non-IC New Construction) NHRM3-6 (6" Non-IC Remodel) NHMIC3-6 (6" IC New Construction) NHMICD3-6 (6" Double Wall IC New Construction) NHRMIC3-6 (6" IC Remodel) Listing: – cULus Listed for Damp Location when used with compatible housing – 5-Year Limited Warranty - [NRM3-62](https://noralighting.com/product/nrm3-62/) - Marquise III COB Series enhances an established series of downlighting with the latest COB technology by Signify®. The COB allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. Lumens / Wattage: Up to 2500lm / 26W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Compatible Housings: Reflector is only compatible with respective Marquise II series frames manufactured by Nora Lighting. NHM3-6 (6" Non-IC New Construction) NHRM3-6 (6" Non-IC Remodel) NHMIC3-6 (6" IC New Construction) NHMICD3-6 (6" Double Wall IC New Construction) NHRMIC3-6 (6" IC Remodel) Listing: - cULus Listed for Wet Location when used with compatible housing - 5-Year Limited Warranty - [NRM3-61](https://noralighting.com/product/nrm3-61/) - Marquise III COB Series enhances an established series of downlighting with the latest COB technology by Signify®. The COB allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. Lumens / Wattage: Up to 2500lm / 26W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Compatible Housings: Reflector is only compatible with respective Marquise II series frames manufactured by Nora Lighting. NHM3-6 (6" Non-IC New Construction) NHRM3-6 (6" Non-IC Remodel) NHMIC3-6 (6" IC New Construction) NHMICD3-6 (6" Double Wall IC New Construction) NHRMIC3-6 (6" IC Remodel) Listing: - cULus Listed for Wet Location when used with compatible housing - 5-Year Limited Warranty - [NRM3-59](https://noralighting.com/product/nrm3-59/) - Marquise III COB Series enhances an established series of downlighting with the latest COB technology by Signify®. The COB allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. Lumens / Wattage: Up to 2500lm / 26W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Compatible Housings: The reflector is only compatible with Marquise III housings manufactured by Nora Lighting. NHM3-5 (5" Non-IC New Construction) NHRM3-5 (5" Non-IC Remodel) NHMIC3-5 (5" IC New Construction) NHRMIC3-5 (5" IC Remodel) Listing: - cULus Listed for Damp Location when used with compatible housing - 5-Year Limited Warranty - [NRM3-58](https://noralighting.com/product/nrm3-58/) - Marquise III COB Series enhances an established series of downlighting with the latest COB technology by Signify®. The COB allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. Lumens / Wattage: Up to 2500lm / 26W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Decorative Glass (Ordered Separately): Up to two glasses can be used per luminaire NTG-5CF (5" Tempered Clear Glass with Frosted Center) NTG-5FC (5" Tempered Frosted Glass with Clear Center) NTG-5HC (5" Tempered Clear Glass with Frosted Center and 3-1/8" Open Center) Compatible Housings: The reflector is only compatible with Marquise III housings manufactured by Nora Lighting. NHM3-5 (5" Non-IC New Construction) NHRM3-5 (5" Non-IC Remodel) NHMIC3-5 (5" IC New Construction) NHRMIC3-5 (5" IC Remodel) Listing: - cULus Listed for Wet Location when used with compatible housing - 5-Year Limited Warranty - [NRM3-57](https://noralighting.com/product/nrm3-57/) - Marquise III COB Series enhances an established series of downlighting with the latest COB technology by Signify®. The COB allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. Lumens / Wattage: Up to 2500lm / 26W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Compatible Housings: The reflector is only compatible with Marquise III housings manufactured by Nora Lighting. NHM3-5 (5" Non-IC New Construction) NHRM3-5 (5" Non-IC Remodel) NHMIC3-5 (5" IC New Construction) NHRMIC3-5 (5" IC Remodel) Listing: - cULus Listed for Damp Location when used with compatible housing - 5-Year Limited Warranty - [NRM3-54](https://noralighting.com/product/nrm3-54/) - Marquise III COB Series enhances an established series of downlighting with the latest COB technology by Signify®. The COB allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. Lumens / Wattage: Up to 2500lm / 26W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Compatible Housings: The reflector is only compatible with Marquise III housings manufactured by Nora Lighting. NHM3-5 (5" Non-IC New Construction) NHRM3-5 (5" Non-IC Remodel) NHMIC3-5 (5" IC New Construction) NHRMIC3-5 (5" IC Remodel) Listing: - cULus Listed for Damp Location when used with compatible housing - 5-Year Limited Warranty - [NRM3-52](https://noralighting.com/product/nrm3-52/) - Marquise III COB Series enhances an established series of downlighting with the latest COB technology by Signify®. The COB allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. Lumens / Wattage: Up to 2500lm / 26W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Compatible Housings: The reflector is only compatible with Marquise III housings manufactured by Nora Lighting. NHM3-5 (5" Non-IC New Construction) NHRM3-5 (5" Non-IC Remodel) NHMIC3-5 (5" IC New Construction) NHRMIC3-5 (5" IC Remodel) Listing: - cULus Listed for Wet Locations when used with compatible housing - 5-Year Limited Warranty - [NRM3-51](https://noralighting.com/product/nrm3-51/) - Marquise III COB Series enhances an established series of downlighting with the latest COB technology by Signify®. The COB allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. Lumens / Wattage: Up to 2500lm / 26W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Compatible Housings: Reflector is only compatible with respective Marquise II series frames manufactured by Nora Lighting. NHM3-5 (5" Non-IC New Construction) NHRM3-5 (5" Non-IC Remodel) NHMIC3-5 (5" IC New Construction) NHRMIC3-5 (5" IC Remodel) Listing: - cULus Listed for Wet Location when used with compatible housing - 5-Year Limited Warranty - [NRM3-42](https://noralighting.com/product/nrm3-42/) - Marquise III COB Series enhances an established series of downlighting with the latest COB technology by Signify®. The COB allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. Lumens / Wattage: Up to 2500lm / 26W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Compatible Housings: The reflector is only compatible with Marquise III housings manufactured by Nora Lighting. NHMIC3-4 (4" IC New Construction) NHRMIC3-4 (4" IC Remodel) NHMICD3-4 (4" IC Double Wall) Listing: - cULus Listed for Wet Location when used with compatible housing - 5-Year Limited Warranty - [NRM3-41](https://noralighting.com/product/nrm3-41/) - Marquise III COB Series enhances an established series of downlighting with the latest COB technology by Signify®. The COB allows for better optic control offering three beam spreads. Beam spreads focus the light down to the work plane from high ceiling applications. Lumens / Wattage: Up to 2500lm / 26W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Compatible Housings: The reflector is only compatible with Marquise III housings manufactured by Nora Lighting. NHMIC3-4 (4" IC New Construction) NHRMIC3-4 (4" IC Remodel) NHMICD3-4 (4" IC Double Wall) Listing: - cULus Listed for Wet Location when used with compatible housing - 5-Year Limited Warranty - [NCHAIC3-8](https://noralighting.com/product/nchaic3-8/) - New Construction Housing for 8" Sapphire III COB LED downlights includes bar hangers that can be adjusted on either side of the flat frame. Clearance: “IC” Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam insulation. Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Reflector: NC3-89 = 4" Adjustable Reflector Emergency Option: Housing can be connected to a remote emergency battery. Emergency driver with remote test switch ordered separately (NEPK-07LEDUNV) - [NCHA3-8](https://noralighting.com/product/ncha3-8/) - New Construction Housing for 8" Sapphire III COB LED downlights includes bar hangers that can be adjusted on either side of the flat frame. Clearance: Non-IC housings require a minimum clearance of 3” from thermal insulation and 1/2” from adjacent building components. Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Reflector: NC3-89 = 4" Adjustable Reflector Emergency Option: Housing can be connected to a remote emergency battery. Emergency driver with remote test switch ordered separately (NEPK-07LEDUNV) - [NCHAIC3-6](https://noralighting.com/product/nchaic3-6/) - New Construction Housing for 6" Sapphire III COB LED downlights includes bar hangers that can be adjusted on either side of the flat frame. Clearance: “IC” Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam insulation. Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Reflector: NC3-69 = 6" Adjustable Reflector Emergency Option: Housing can be connected to a remote emergency battery. Emergency driver with remote test switch ordered separately (NEPK-07LEDUNV) - [NCHA3-6](https://noralighting.com/product/ncha3-6/) - New Construction Housing for 6" Sapphire III COB LED downlights includes bar hangers that can be adjusted on either side of the flat frame. Clearance: Non-IC housings require a minimum clearance of 3” from thermal insulation and 1/2” from adjacent building components. Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Reflector: NC3-69 = 6" Adjustable Reflector Emergency Option: Housing can be connected to a remote emergency battery. Emergency driver with remote test switch ordered separately (NEPK-07LEDUNV) - [NCHAIC3-4](https://noralighting.com/product/nchaic3-4/) - New Construction Housing for 4" Sapphire III COB LED downlights includes bar hangers that can be adjusted on either side of the flat frame. Clearance: “IC” Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam insulation. Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Reflector: NC3-49 = 4" Adjustable Reflector Emergency Option: Housing can be connected to a remote emergency battery. Emergency driver with remote test switch ordered separately (NEPK-07LEDUNV) - [NRM3-6S1](https://noralighting.com/product/nrm3-6s1/) - Marquise III sloped reflectors include Signify® COB LEDs with optimized beam spreads. A Unitized Thermal Management (UTM) system and outboard-mounted driver allow cooler operation. Lumens / Wattage: Up to 1200lm / 16W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Compatible Housings: The trim is only compatible with Marquise III housings manufactured by Nora Lighting. NHMIC3-926: (6" Non-IC New Construction) NHRMIC3-926: (6" IC Remodel) Listing: - cULus Listed for Damp Location when used with compatible housing - 5-Year Limited Warranty - [NRM3-6S2](https://noralighting.com/product/nrm3-6s2/) - Marquise III sloped baffles include Signify® COB LEDs with optimized beam spreads. A Unitized Thermal Management (UTM) system and outboard-mounted driver allow cooler operation. Lumens / Wattage: Up to 1200lm / 16W Beam Spread: Spot, Narrow Flood or Flood Color Temperatures: 2700K, 3000K, 3500K or 4000K Compatible Housings: The trim is only compatible with Marquise III housings manufactured by Nora Lighting. NHMIC3-926: (6" Non-IC New Construction) NHRMIC3-926: (6" IC Remodel) Listing: - cULus Listed for Damp Location when used with compatible housing - 5-Year Limited Warranty - [NHRMIC3-926](https://noralighting.com/product/nhrmic3-926/) - IC construction housing for sloped ceilings offers a clear path of unobstructed light from a 6/12 pitch ceiling to any floor or surface. Air-tight housing additionally reduces energy costs by decreasing the flow of air escaping through the ceiling. It is rated for direct contact with insulation and adjacent ceiling structures. Sloped IC housings are easy and quick to install and accept Marquise II sloped reflectors. Input Voltage: 120V or 120-277V Lumens / Wattage: Up to 1200lm / 16W Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Trims: NRM3-6S1: 6" Marquise III Sloped LED Reflector NRM3-6S2: 6" Marquise III Sloped LED Baffle - [NHMIC3-926](https://noralighting.com/product/nhmic3-926/) - IC construction housing for sloped ceiling offer a clear path of unobstructed light from a 6/12 pitch ceiling to any floor or surface. Air-tight housing additionally reduces energy costs by decreasing the flow or air escaping through the ceiling. Rated for direct contact with insulation and adjacent ceiling structures. Sloped IC housings are easy and quick to install and accepts Marquise II sloped reflectors. Input Voltage: 120V or 120-277V Lumens / Wattage: Up to 1200lm / 16W Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Trims: NRM3-6S1: 6" Marquise III Sloped LED Reflector NRM3-6S2: 6" Marquise III Sloped LED Baffle - [NL-4585](https://noralighting.com/product/nl-4585/) - 4" Square Adjustable Reflector rated up to 50W max. Compatible Low Voltage Housings: NL-408AT: IC Air-Tight New Construction (Rated up to 50W) NLIC-408AT: IC Air-Tight New Construction (Rated up to 50W) NLR-409AT: Non-IC Remodel (Rated up to 50W) Lamp: 12V MR16 Mounting: Trim Clips Listing: cULus Listed for Damp Location - [NL-601](https://noralighting.com/product/nl-601/) - Nora Lighting’s series of 6" low voltage housings provides crisp, defined quartz halogen illumination from MR16, AR111 or PAR36 light sources to any application. A wide variety of attractive adjustable trims allows fine-tuned aiming of directional light sources. Also available as remodel. Transformer: Input: 120V Transformer: Electronic or Magnetic Output: 12V 50W Minimum Clearances: Non-IC housings require a minimum clearance of 3" from thermal insulation and 1/2" from adjacent building components Ceiling Thickness: Ceiling thickness varies from 5/8" - 1-3/8" Lamp Adjustment: Circular bracket on low voltage trims provides a secure snap-in hold and friction-locked aiming adjustment. UV/Shatter Guard Shield: All low voltage trims include a tempered UV/shatter shield. Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be repositioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Junction Box: Junction box is listed for through branch circuit wiring and contains seven 1/2" knockouts and four Romex® pryouts with strain relief Dimming: Use magnetic low voltage dimming control with magnetic transformer or electronic low voltage dimming control with electronic transformer Electrical: Quick Connector provided Wattage: 20W-50W (actual wattage varies with trim) Lamp: 12V MR16 / AR111 / PAR36 Dimensions: Length: 12-1/2" Width: 7-1/2" Depth: 7-1/2" Ceiling Opening: 6-3/8" Listings: cULus Damp Location w/ Feed Through cULus Wet Location (Only with designated trims) - [NL-408AT](https://noralighting.com/product/nl-408at/) - The Q4 series is designed for architectural and commercial applications. The reflectors feature aluminum die-cast construction with deep set lamp holders providing excellent visual comfort. The Q4 die-cast aluminum lamp holders help dissipate heat for longer life and can accommodate 2 filters. The Q4 series available with Electronic or Magnetic transformer. Minimum Clearances: Non-IC housings require a minimum clearance of 3” from thermal insulation and 1/2" from adjacent building components. Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be repositioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Socket: Bi-Pin GU5.3 socket with heat shield Maximum Wattage: 50W (consult factory for lower wattage label) - [NLR-403S](https://noralighting.com/product/nlr-403s/) - 4” Shallow low voltage remodel housing for installation into existing sheet rock ceilings where access is only available from below the ceiling. A wide variety of attractive adjustable trims allows fine-tuned aiming of direction light sources. - [NL-402S](https://noralighting.com/product/nl-402s/) - 4” Shallow low voltage IC small low profile new construction housing provides crisp, defined MR16 quartz halogen illumination to any insulated ceiling application. The small profile of this series provides easy installation to any joist or steel stud construction. A wide variety of attractive adjustable trims allows fine-tuned aiming of direction light sources. - [NLR-404](https://noralighting.com/product/nlr-404/) - 4" low voltage remodel housing for installation into existing sheet rock ceilings where access is only available from below the ceiling. A wide variety of attractive adjustable trims allows fine-tuned aiming of direction light sources. Input Voltage: 120V Output Voltage: 12V Transformer: Magnetic or Electronic (must specify) Wattage: 50W max. (can be labeled at lower wattage, consult factory) Lamp / Socket: MR16 / GU5.3 Minimum Clearances: Non-IC housings require a minimum clearance of 3” from thermal insulation and 1/2" from adjacent building components. - [NLIC-401](https://noralighting.com/product/nlic-401/) - 4” low voltage IC small low profile double wall housing provides crisp, defined MR16 quartz halogen illumination to any insulated ceiling application. Air-Tight construction offers energy savings by reducing the flow of air through the ceiling. The small profile of this series provides easy installation to any joist or steel stud construction. A wide variety of attractive adjustable trims allows fine-tuned aiming of direction light sources. Input Voltage: 120V Output Voltage: 12V Transformer: Magnetic or Electronic (must specify) Wattage: 50W max. (can be labeled at lower wattage, consult factory) Lamp / Socket: MR16 / GU5.3 - [NL-301](https://noralighting.com/product/nl-301/) - Nora Lighting’s 3" low voltage housing provides soft, brilliant JC or crisp, defined MR16 quartz halogen illumination to any application. Airtight option offers energy savings by reducing the flow of air through the ceiling. A wide variety of attractive trims provide beautiful decorative enhancements to any ceiling. Minimum Clearances: Non-IC housings require a minimum clearance of 3” from thermal insulation and 1/2" from adjacent building components. Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be repositioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Socket: Bi-Pin GU5.3 socket with heat shield Maximum Wattage: 50W (can be labeled for lower wattages - consult factory) - [NLIC-301](https://noralighting.com/product/nlic-301/) - 3" low voltage IC double wall housing provides soft, brilliant JC or crisp, defined MR16 quartz halogen illumination to any insulated ceiling application. Airtight option offers energy savings by reducing the flow of air through the ceiling. A wide variety of attractive trims provide beautiful decorative enhancements to any ceiling. Minimum Clearances: “IC” Housings are direct contact rated; no minimum clearance is required Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be repositioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Socket: Bi-Pin GU5.3 socket with heat shield Maximum Wattage: 50W (can be labeled for lower wattages - consult factory) - [NTM-615](https://noralighting.com/product/ntm-615/) - Metal baffle trim accommodates slope ceilings with a 2/12 - 6/12 pitch to provide straight downlighting Finish: Black Baffle / White Flange (B) or White Baffle / White Flange (W) OD: 7-1/2" x 7-7/8" Lamp (not included): 75W BR30/PAR30 max. or 100W BR40/PAR38 Compatible Housings: NHIC-926QAT: 6" Sloped IC Air-Tight New Construction Housing (75W BR30/PAR30 max.) NHRIC-926QAT: 6" Sloped IC Air-Tight Remodel Housing (75W BR30/PAR30 max.) NHIC-926DWQAT: 6" Sloped IC Air-Tight Double Wall Housing (100W BR40/PAR38 max.) - [NTP-614](https://noralighting.com/product/ntp-614/) - Metal baffle trim accommodates slope ceilings with a 2/12 - 6/12 pitch to provide straight downlighting Finish: Black Baffle / White Flange (B) or White Baffle / White Flange (W) OD: 7-1/2" x 7-7/8" Lamp (not included): 75W BR30/PAR30 max. or 100W BR40/PAR38 Compatible Housings: NHIC-926QAT: 6" Sloped IC Air-Tight New Construction Housing (75W BR30/PAR30 max.) NHRIC-926QAT: 6" Sloped IC Air-Tight Remodel Housing (75W BR30/PAR30 max.) NHIC-926DWQAT: 6" Sloped IC Air-Tight Double Wall Housing (100W BR40/PAR38 max.) - [NTM-616/45](https://noralighting.com/product/ntm-616-45/) - Super sloped trims adjust up to 45° for ceilings with steep pitches. Reflector Finishes: Black (B), White (W) Flange Finish: White Lamp: 75W BR40, PAR38, BR30 or PAR30 max. Compatible Housings: NHIC-928QAT: 6" Super Sloped New Construction Housing NHRIC-928QAT: 6" Super Sloped Remodel Housing - [NTM-617/45](https://noralighting.com/product/ntm-617-45/) - Super sloped trims adjust up to 45° for ceilings with steep pitches. Baffle Finishes: Black (B), White (W) Flange Finish: White Lamp: 75W BR40, PAR38, BR30 or PAR30 max. Compatible Housings: NHIC-928QAT: 6" Super Sloped New Construction Housing NHRIC-928QAT: 6" Super Sloped Remodel Housing - [NL-4859](https://noralighting.com/product/nl-4859/) - 4" Square Reflector with Square Aperture and Clear Lens for Round housings rated up to 50W max. Compatible Low Voltage Housings: NLIC-401: IC Air-Tight New Construction (Rated up to 50W) NL-401: IC New Construction (Rated up to 50W) NLR-404: Non-IC Remodel (Rated up to 50W) Compatible Line Voltage Housings: NSEIC-407AT/20: IC Air-Tight New Construction (Rated up to 20W) NSERIC-407AT/20: IC Air-Tight Remodel (Rated up to 20W) NFBIC-401AT/25A: Fire Rated IC Air-Tight New Construction (Rated up to 25W) NSLIC-401AT/10: IC Air-Tight New Construction (Rated up to 50W) NSL-401AT/10: Non-IC Air-Tight New Construction (Rated up to 50W) NSLR-404AT/10: Non-IC Air-Tight Remodel (Rated up to 50W) Lamp: 12V MR16 or 120V MR16 GU10 Mounting: Trim Clips Listing: cULus Listed for Wet Location when used with Compatible Housing - [NL-432](https://noralighting.com/product/nl-432/) - 4" Round Deep Reflector. Rated up to 75W and compatible with LED lamps. Compatible Low Voltage Housings: NLIC-401: IC Air-Tight New Construction (Rated up to 50W) NL-401: IC New Construction (Rated up to 75W) NLR-404: Non-IC Remodel (Rated up to 75W) Compatible Line Voltage Housings: NSEIC-407AT/20: IC Air-Tight New Construction (Rated up to 20W) NSERIC-407AT/20: IC Air-Tight Remodel (Rated up to 20W) NFBIC-401AT/25A: Fire Rated IC Air-Tight New Construction (Rated up to 25W) NSLIC-401AT/10: IC Air-Tight New Construction (Rated up to 50W) NSL-401AT/10: Non-IC Air-Tight New Construction (Rated up to 50W) NSLR-404AT/10: Non-IC Air-Tight Remodel (Rated up to 50W) Lamp: 12V MR16 or 120V MR16 GU10 Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NL-4857](https://noralighting.com/product/nl-4857/) - 4" Square Reflector with Square Aperture for Round housings. Rated up to 75W and compatible with LED lamps. Compatible Low Voltage Housings: NLIC-401: IC Air-Tight New Construction (Rated up to 50W) NL-401: IC New Construction (Rated up to 75W) NLR-404: Non-IC Remodel (Rated up to 75W) Compatible Line Voltage Housings: NSEIC-407AT/20: IC Air-Tight New Construction (Rated up to 20W) NSERIC-407AT/20: IC Air-Tight Remodel (Rated up to 20W) NFBIC-401AT/25A: Fire Rated IC Air-Tight New Construction (Rated up to 25W) NSLIC-401AT/10: IC Air-Tight New Construction (Rated up to 50W) NSL-401AT/10: Non-IC Air-Tight New Construction (Rated up to 50W) NSLR-404AT/10: Non-IC Air-Tight Remodel (Rated up to 50W) Lamp: 12V MR16 or 120V MR16 GU10 Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NL-3326](https://noralighting.com/product/nl-3326/) - Frosted Flat Lens with Reflector for Low Voltage and Line Voltage Housings Lamps: Line Voltage: 50W 120V MR16 GU10 max. Low Voltage: 20-50W 12V MR16 max. Mounting: Trim Clips - [NL-3345](https://noralighting.com/product/nl-3345/) - 3" Adjustable Slot Aperture Metal trim with 1-1/8" x 1-3/4" slot aperture that can rotate 358° horizontally. Gimbal ring allows lamp to be mounted on top of the trim and adjustable up to 35°. Lamp: Line Voltage: 50W 120V MR16 GU10(LED or Halogen) Low Voltage: 20W-50W 12V MR16 - [NL-3310](https://noralighting.com/product/nl-3310/) - 3" Round Adjustable Baffle Precision spun 0.040 aluminum baffle with deep grooves to reduce aperture glare. Non-reflective painted finishes. Gimbal ring allows lamp to be mounted on top of the trim and adjustable up to 35°. Lamp: Line Voltage: 50W 120V MR16 GU10(LED or Halogen) Low Voltage: 20W-50W 12V MR16 - [NL-3412](https://noralighting.com/product/nl-3412/) - 3" Square Reflector with Round Aperture Precision spun 0.050 aluminum high grade reflector. Gimbal ring allows lamp to be mounted on top of the trim and adjustable up to 35°. Lamp: Line Voltage: 50W 120V MR16 GU10(LED or Halogen) Low Voltage: 20W-50W 12V MR16 - [NFBIC-401AT/25A](https://noralighting.com/product/nfbic-401at-25a/) - Specification grade fire-rated new construction housing. The double wall fixture incorporates a non-combustible fiber insulation to prevent passage of flames, toxic gases, ignitable gasses into ceiling plenums. The cULus listed housing is rated for a minimum of two hours protection. Suitable for commercial, multi-family and residential applications. Fire Rating: cULus two-hour fire rated classification. Housings are direct contact rated; no minimum clearance is required Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be repositioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Maximum Wattage: 25W - [NSERIC-407AT/20](https://noralighting.com/product/nseric-407at-20/) - Remodel four inch housing for installation into existing sheet rock ceilings where access is only available from below the ceiling. Rated for direct contact with thermal insulation, Nora’s 4" IC housing is quick to install, accepts a wide variety of high quality trims, and is airtight built for energy savings. IC Recessed housings are high quality, light weight units ideal for use in insulated ceilings. Air-tight construction reduces energy costs by reducing the amount of air escaping through the ceiling. Rated for direct contact with insulation (except spay foam insulation) and combustive materials. Minimum Clearances: “IC” Housings are direct contact rated; no minimum clearance is required Installation: High tension tempered steel springs secure remodel housings evenly to ceiling; hole cutout template provided for convenience. Socket: GU10 Twist and Lock Maximum Wattage: 20W - [NSL-401AT/10](https://noralighting.com/product/nsl-401at-10/) - Line Voltage MR16 GU10 housing provides the crisp reflectance of MR16 light sources while operating on straight line voltage without transformers. GU10 lamps are shielded and feature solid, heavy duty turn-and-lock contacts. Nora’s GU10 fixture is quick to install, operates on standard incandescent dimming controls, and accepts a wide variety of high quality, adjustable finishing trims. Also available as remodel. Minimum Clearances: Non-IC housings require minimum clearances of 3" from thermal insulation and 1/2" from adjacent building components Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be re-positioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Socket: GU10 Twist and Lock Maximum Wattage: 50W - [NSLIC-401AT/10](https://noralighting.com/product/nslic-401at-10/) - Line Voltage MR16 GU10 housing provides the crisp reflectance of MR16 light sources in insulated ceiling environments. GU10 lamps are shielded and feature solid, heavy duty turn-and-lock contacts. Nora’s GU10 fixture is quick to install, operates on standard incandescent dimming controls, and accepts a wide variety of high quality, adjustable finished trims. IC Recessed housings are high quality, light weight units ideal for use in insulated ceilings. Air-tight construction reduces energy costs by reducing the amount of air escaping through the ceiling. Rated for direct contact with insulation (except spay foam insulation) and combustive materials. Minimum Clearances: “IC” Housings are direct contact rated; no minimum clearance is required Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be repositioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Socket: GU10 Twist and Lock Maximum Wattage: 50W - [NHR-354AT](https://noralighting.com/product/nhr-354at/) - Line Voltage MR16 GU10 housing provides the crisp reflectance of MR16 light sources while operating on straight line voltage without transformers. GU10 lamps are shielded and feature solid, heavy duty turn-and-lock contacts. Nora’s GU10 fixture is quick to install, operates on standard incandescent dimming controls, and accepts a wide variety of high quality, adjustable finishing trims. Minimum Clearances: Non-IC housings require minimum clearances of 3" from thermal insulation and 1/2" from adjacent building components Installation: High tension tempered steel springs secure remodel housings evenly to ceiling; hole cutout template provided for convenience. Socket: GU10 Twist and Lock Maximum Wattage: 50W - [NH-350AT](https://noralighting.com/product/nh-350at/) - Line Voltage MR16 GU10 housing provides the crisp reflectance of MR16 light sources while operating on straight line voltage without transformers. GU10 lamps are shielded and feature solid, heavy duty turn-and-lock contacts. Nora’s GU10 fixture is quick to install, operates on standard incandescent dimming controls, and accepts a wide variety of high quality, adjustable finishing trims. Also available as remodel. Minimum Clearances: Non-IC housings require minimum clearances of 3" from thermal insulation and 1/2" from adjacent building components Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be re-positioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Socket: GU10 Twist and Lock Maximum Wattage: 50W - [NHIC-350AT](https://noralighting.com/product/nhic-350at/) - Line Voltage MR16 GU10 housing provides the crisp reflectance of MR16 light sources in insulated ceiling environments. GU10 lamps are shielded and feature solid, heavy duty turn-and-lock contacts. Nora’s GU10 fixture is quick to install, operates on standard incandescent dimming controls, and accepts a wide variety of high quality, adjustable finished trims. IC Recessed housings are high quality, light weight units ideal for use in insulated ceilings. Air-tight construction reduces energy costs by reducing the amount of air escaping through the ceiling. Rated for direct contact with insulation (except spay foam insulation) and combustive materials. Minimum Clearances: “IC” Housings are direct contact rated; no minimum clearance is required Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be repositioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Socket: GU10 Twist and Lock Maximum Wattage: 50W - [NARGB-710W](https://noralighting.com/product/nargb-710w/) - The 12" power line interconnector cable allows for easy connection to any CCT controller with NARGBW-710W-M. One is included and connected with each CCT Tape Light roll. Additional cables can be used for additional tape light sections to be installed in different locations. Compatible CCT Controllers: NACCT-868: CCT Touch Pad Wall Controller NATL-875: RGBW & CCT Controller for Tape Light Extension Cables: NARGB-702: 2" Extension Cable NARGB-706: 6" Extension Cable NARGB-708: 8" Extension Cable NARGB-718: 18" Extension Cable NARGB-736: 36" Extension Cable Compatible Tape Light: NUTP10: 24V CCT Color Tuning Tape Light - [NARGBW-710W-M](https://noralighting.com/product/nargbw-710-m/) - The 12" controller quick connect allows for easy connection to any CCT controller with NARGB-710W. Compatible CCT Controllers: NACCT-868: CCT Touch Pad Wall Controller NATL-875: RGBW & CCT Controller for Tape Light Compatible Quick Connect: NARGB-710W: 12" Power Line Interconnector - [NTM-31](https://noralighting.com/product/ntm-31/) - 6" BR/PAR30 Stepped Baffle Trim with Ring for Line Voltage Recessed Housings. Rated up to 75W and compatible with LED lamps. Compatible Housings: NH-26Q: Non-IC New Construction (Rated up to 75W) NH-27Q: Non-IC Shallow New Construction (Rated up to 75W) NHIC-17/100DWQA: IC Air-Tight New Construction (Ratd up to 75W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 75W) NHIC-27QAT: IC Air-Tight Shallow New Construction (Rated up to 75W) NHR-26Q: Non-IC Remodel (Rated up to 75W) NHR-27Q: Non-IC Shallow Remodel (Rated up to 75W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 75W) NHRIC-27QAT: IC Air-Tight Shallow Remodel (Rated up to 75W) Mounting: Coil Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTM-716](https://noralighting.com/product/ntm-716/) - ** While Supplies Last ** 6" Air-Tight Shallow Baffle Cone for Line Voltage Recessed Housings. Rated up to 75W and compatible with LED lamps. Compatible Housings: NHIC-27QAT: IC Air-Tight New Construction (Ratd up to 75W) NH-27QAT: IC Air-Tight New Construction (Rated up to 75W) NHRIC-27QAT: Non-IC Remodel (Rated up to 75W) NHR-27QAT: Non-IC Remodel (Rated up to 75W) NFBIC-6INCATA: IC Air-Tight Fire Rated New Construction (Rated up to 90W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTM-42](https://noralighting.com/product/ntm-42/) - 6" Regressed Albalite Lens with Baffle for Line Voltage Recessed Housings. Rated up to 60W and compatible with LED lamps. Compatible Housings: NH-27Q: Non-IC Shallow New Construction (Rated up to 40W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 40W) NHIC-27QAT: IC Air-Tight Shallow New Construction (Rated up to 40W) NHR-27Q: Non-IC Shallow Remodel (Rated up to 40W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 40W) NHRIC-27QAT: IC Air-Tight Shallow Remodel (Rated up to 40W) NHR-26Q: Non-IC Remodel (Rated up to 60W) NHR-26Q: Non-IC Remodel (Rated up to 60W) NHIC-17/100DWQA: IC Air-Tight New Construction (Ratd up to 60W) Mounting: Torsion Springs Listing: cULus Listed for Wet Location when used with Compatible Housing - [NP-323](https://noralighting.com/product/np-323/) - 6" Fresnel Lens with Trim and Bracket for Line Voltage Recessed Housings. Rated up to 60W and compatible with LED lamps. Compatible Lamps: A19 Compatible Housings: NHIC-27QAT: IC Air-Tight Shallow New Construction (Rated up to 25W) NHRIC-27QAT: IC Air-Tight Shallow Remodel (Rated up to 25W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 40W) NHIC-17QNBAT: IC Air-Tight New Construction w/ Floating Socket/No Bracket (Rated up to 40W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 40W) NHRIC-17QNBAT: IC Air-Tight Remodel w/ Floating Socket/No Bracket (Rated up to 40W) NH-26Q: Non-IC New Construction (Rated up to 60W) NH-27Q: Non-IC Shallow New Construction (Rated up to 60W) NHIC-17/100DWQA: IC Air-Tight New Construction (Ratd up to 60W) NHR-26Q: Non-IC Remodel (Rated up to 60W) NHR-27Q: Non-IC Shallow Remodel (Rated up to 60W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTM-323](https://noralighting.com/product/ntm-323/) - 6" Fresnel Lens with Trim and Bracket for Line Voltage Recessed Housings. Rated up to 60W and compatible with LED lamps. Compatible Housings: NHIC-27QAT: IC Air-Tight Shallow New Construction (Rated up to 25W) NHRIC-27QAT: IC Air-Tight Shallow Remodel (Rated up to 25W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 40W) NHIC-17QNBAT: IC Air-Tight New Construction w/ Floating Socket/No Bracket (Rated up to 40W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 40W) NHRIC-17QNBAT: IC Air-Tight Remodel w/ Floating Socket/No Bracket (Rated up to 40W) NH-26Q: Non-IC New Construction (Rated up to 60W) NH-27Q: Non-IC Shallow New Construction (Rated up to 60W) NHIC-17/100DWQA: IC Air-Tight New Construction (Ratd up to 60W) NHR-26Q: Non-IC Remodel (Rated up to 60W) NHR-27Q: Non-IC Shallow Remodel (Rated up to 60W) Mounting: Torsion Springs Listing: cULus Listed for Wet Location when used with Compatible Housing - [NP-322](https://noralighting.com/product/np-322/) - 6" Albalite Lens with Plastic Trim and Bracket rated up to 60W max. Compatible Housings: NH-26Q: Non-IC New Construction (Rated up to 60W) NHR-26Q: Non-IC Remodel (Rated up to 60W) NHIC-17/100DWQA: IC AT Double Wall New Construction (Rated up to 60W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 40W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 40W) NHIC-17QNBAT: IC Air-Tight New Construction, No Bracket (Rated up to 40W) NHRIC-17QNBAT: IC Air-Tight Remodel, No Bracket (Rated up to 40W) NH-27Q: Shallow Non-IC New Construction (Rated up to 60W) NHR-27Q: Shallow Non-IC New Construction (Rated up to 60W) NHIC-27QAT: Shallow IC Air-Tight New Construction (Rated up to 25W) NHRIC-27QAT: Shallow IC Air-Tight Remodel (Rated up to 25W) Mounting: Torsion Springs Listing: cULus Listed for Wet Location when used with Compatible Housing - [NTM-322](https://noralighting.com/product/ntm-322/) - 6" Albalite Lens with Metal Trim and Bracket rated up to 60W max. Compatible Housings: NH-26Q: Non-IC New Construction (Rated up to 60W) NHR-26Q: Non-IC Remodel (Rated up to 60W) NHIC-17/100DWQA: IC AT Double Wall New Construction (Rated up to 60W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 40W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 40W) NHIC-17QNBAT: IC Air-Tight New Construction, No Bracket (Rated up to 40W) NHRIC-17QNBAT: IC Air-Tight Remodel, No Bracket (Rated up to 40W) NH-27Q: Shallow Non-IC New Construction (Rated up to 60W) NHR-27Q: Shallow Non-IC New Construction (Rated up to 60W) NHIC-27QAT: Shallow IC Air-Tight New Construction (Rated up to 25W) NHRIC-27QAT: Shallow IC Air-Tight Remodel (Rated up to 25W) Mounting: Torsion Springs Listing: cULus Listed for Wet Location when used with Compatible Housing - [NP-24](https://noralighting.com/product/np-24/) - 6" Drop Opal Lens with Plastic Trim rated up to 60W max. Compatible Housings: NH-26Q: Non-IC New Construction (Rated up to 60W) NHR-26Q: Non-IC Remodel (Rated up to 60W) NHIC-17/100DWQA: IC AT Double Wall New Construction (Rated up to 60W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 40W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 40W) NH-27Q: Shallow Non-IC New Construction (Rated up to 60W) NHR-27Q: Shallow Non-IC New Construction (Rated up to 60W) NHIC-27QAT: Shallow IC Air-Tight New Construction (Rated up to 25W) NHRIC-27QAT: Shallow IC Air-Tight Remodel (Rated up to 25W) NHIC-926QAT: Sloped IC Air-Tight New Construction (Rated up to 40W) NHRIC-926QAT: Sloped IC Air-Tight Remodel (Rated up to 40W) Mounting: Torsion Springs Listing: cULus Listed for Wet Location when used with Compatible Housing - [NP-23](https://noralighting.com/product/np-23/) - 6" Fresnel Lens with Plastic Trim rated up to 60W max. Compatible Housings: NH-26Q: Non-IC New Construction (Rated up to 60W) NHR-26Q: Non-IC Remodel (Rated up to 60W) NHIC-17/100DWQA: IC AT Double Wall New Construction (Rated up to 60W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 40W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 40W) NH-27Q: Shallow Non-IC New Construction (Rated up to 60W) NHR-27Q: Shallow Non-IC New Construction (Rated up to 60W) NHIC-27QAT: Shallow IC Air-Tight New Construction (Rated up to 25W) NHRIC-27QAT: Shallow IC Air-Tight Remodel (Rated up to 25W) NHIC-926QAT: Sloped IC Air-Tight New Construction (Rated up to 40W) NHRIC-926QAT: Sloped IC Air-Tight Remodel (Rated up to 40W) Mounting: Torsion Springs Listing: cULus Listed for Wet Location when used with Compatible Housing - [NT-23](https://noralighting.com/product/nt-23/) - 6" Fresnel Lens with Metal Trim rated up to 60W max. Compatible Housings: NH-26Q: Non-IC New Construction (Rated up to 60W) NHR-26Q: Non-IC Remodel (Rated up to 60W) NHIC-17/100DWQA: IC AT Double Wall New Construction (Rated up to 60W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 40W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 40W) NH-27Q: Shallow Non-IC New Construction (Rated up to 60W) NHR-27Q: Shallow Non-IC New Construction (Rated up to 60W) NHIC-27QAT: Shallow IC Air-Tight New Construction (Rated up to 25W) NHRIC-27QAT: Shallow IC Air-Tight Remodel (Rated up to 25W) NHIC-926QAT: Sloped IC Air-Tight New Construction (Rated up to 40W) NHRIC-926QAT: Sloped IC Air-Tight Remodel (Rated up to 40W) Mounting: Torsion Springs Listing: cULus Listed for Wet Location when used with Compatible Housing - [NP-22](https://noralighting.com/product/np-22/) - 6" Albalite Lens with Plastic Trim for Line Voltage Recessed Housings. Rated up to 60W. Compatible Housings: NHIC-17/100DWQA: IC Air-Tight New Construction (Rated up to 60W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 40W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 40W) NH-26Q: Non-IC New Construction (Rated up to 60W) NHR-26Q: Non-IC Remodel (Rated up to 60W) NHIC-27QAT: Shallow IC Air-Tight New Construction (Rated up to 60W) NHRIC-27QAT: Shallow IC Air-Tight Remodel (Rated up to 60W) NH-27Q: Shallow Non-IC New Construction (Rated up to 60W) NHR-27Q: Shallow Non-IC New Construction w/ Floating Socket/No Bracket (Rated up to60W) NHIC-926QAT: Sloped IC Air-Tight New Construction Sloped (Rated up to 40W) NHRIC-926QAT: Sloped IC Air-Tight Remodel Sloped (Rated up to 40W) NHIC-926DWQAT: Sloped IC Air-Tight Double Wall New Construction Sloped (Rated up to 40W) NHRIC-926QAT: Sloped IC Air-Tight Remodel Sloped (Rated up to 40W) Mounting: Torsion Springs Listing: cULus Listed for Wet Location when used with Compatible Housing - [NT-22](https://noralighting.com/product/nt-22/) - 6" Albalite Lens with Metal Trim for Line Voltage Recessed Housings. Rated up to 60W. Compatible Housings: NHIC-17/100DWQA: IC Air-Tight New Construction (Rated up to 60W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 40W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 40W) NH-26Q: Non-IC New Construction (Rated up to 60W) NHR-26Q: Non-IC Remodel (Rated up to 60W) NHIC-27QAT: Shallow IC Air-Tight New Construction (Rated up to 60W) NHRIC-27QAT: Shallow IC Air-Tight Remodel (Rated up to 60W) NH-27Q: Shallow Non-IC New Construction (Rated up to 60W) NHR-27Q: Shallow Non-IC New Construction w/ Floating Socket/No Bracket (Rated up to60W) NHIC-926QAT: Sloped IC Air-Tight New Construction Sloped (Rated up to 40W) NHRIC-926QAT: Sloped IC Air-Tight Remodel Sloped (Rated up to 40W) NHIC-926DWQAT: Sloped IC Air-Tight Double Wall New Construction Sloped (Rated up to 40W) NHRIC-926QAT: Sloped IC Air-Tight Remodel Sloped (Rated up to 40W) Mounting: Torsion Springs Listing: cULus Listed for Wet Location when used with Compatible Housing - [NTM-300](https://noralighting.com/product/ntm-300/) - 6" BR/PAR30 Open Metal Trim with Bracket for Line Voltage Recessed Housings. Rated up to 75W and compatible with LED lamps. Compatible Housings: NFBIC-6INCATA: IC Air-Tight Fire Rated New Construction (Rated up to 75W) NH-26Q: Non-IC New Construction (Rated up to 75W) NH-27Q: Non-IC Shallow New Construction (Rated up to 75W) NHIC-17/100DWQA: IC Air-Tight New Construction (Ratd up to 75W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 75W) NHIC-17QNBAT: IC Air-Tight New Construction w/ Floating Socket/No Bracket (Rated up to 75W) NHIC-27QAT: IC Air-Tight Shallow New Construction (Rated up to 75W) NHR-26Q: Non-IC Remodel (Rated up to 75W) NHR-27Q: Non-IC Shallow Remodel (Rated up to 75W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 75W) NHRIC-17QNBAT: IC Air-Tight Remodel w/ Floating Socket/No Bracket (Rated up to 75W) NHRIC-27QAT: IC Air-Tight Shallow Remodel (Rated up to 75W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NT-30D](https://noralighting.com/product/nt-30d/) - 6" BR/PAR30 Metal Splay Trim rated up to 75W max. Compatible Housings: NH-26Q: Non-IC New Construction (Rated up to 75W) NHR-26Q: Non-IC Remodel (Rated up to 75W) NHIC-17/100DWQA: IC AT Double Wall New Construction (Rated up to 75W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 75W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 75W) NH-27Q: Shallow Non-IC New Construction (Rated up to 75W) NHR-27Q: Non-IC Remodel (Rated up to 75W) NHIC-27QAT: Shallow IC Air-Tight New Construction (Rated up to 75W) NHRIC-27QAT: Shallow IC Air-Tight Remodel (Rated up to 75W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NT-30](https://noralighting.com/product/nt-30/) - 6" BR30/PAR30 Open Metal Trim rated up to 75W max. Compatible Housings: NH-26Q: Non-IC New Construction (Rated up to 75W) NHR-26Q: Non-IC Remodel (Rated up to 75W) NHIC-17/100DWQA: IC AT Double Wall New Construction (Rated up to 75W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 75W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 75W) NH-27Q: Shallow Non-IC New Construction (Rated up to 75W) NHR-27Q: Non-IC Remodel (Rated up to 75W) NHIC-27QAT: Shallow IC Air-Tight New Construction (Rated up to 75W) NHRIC-27QAT: Shallow IC Air-Tight Remodel (Rated up to 75W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NT-25](https://noralighting.com/product/nt-25/) - 6" Half Moon Wall Wash with Reflector for Line Voltage Recessed Housings. Rated up to 75W. Compatible Housings: NHIC-17/100DWQA: IC Air-Tight New Construction (Rated up to 60W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 60W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 60W) NH-26Q: Non-IC New Construction (Rated up to 60W) NHR-26Q: Non-IC Remodel (Rated up to 60W) NH-27Q: Shallow Non-IC New Construction (Rated up to 60W) NHR-27Q: Shallow Non-IC New Construction w/ Floating Socket/No Bracket (Rated up to 60W) NHIC-926QAT: Sloped IC Air-Tight New Construction Sloped (Rated up to 75W) NHRIC-926QAT: Sloped IC Air-Tight Remodel Sloped (Rated up to 75W) NHIC-926DWQAT: Sloped IC Air-Tight Double Wall New Construction Sloped (Rated up to 75W) NHRIC-926QAT: Sloped IC Air-Tight Remodel Sloped (Rated up to 75W) NHR-26Q: Non-IC Remodel (Rated up to 75W) Lamp Type: A19 Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTM-49](https://noralighting.com/product/ntm-49/) - 6" Stepped Baffle with Regressed Eyeball for Line Voltage Recessed Housings. Rated up to 75W and compatible with LED lamps. Compatible Housings: NFBIC-6INCATA: IC Air-Tight Fire Rated New Construction (Rated up to 75W) NH-26Q: Non-IC New Construction (Rated up to 75W) NH-27Q: Non-IC Shallow New Construction (Rated up to 75W) NHIC-17/100DWQA: IC Air-Tight New Construction (Ratd up to 75W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 75W) NHIC-17QNBAT: IC Air-Tight New Construction w/ Floating Socket/No Bracket (Rated up to 75W) NHIC-27QAT: IC Air-Tight Shallow New Construction (Rated up to 75W) NHR-26Q: Non-IC Remodel (Rated up to 75W) NHR-27Q: Non-IC Shallow Remodel (Rated up to 75W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 75W) NHRIC-17QNBAT: IC Air-Tight Remodel w/ Floating Socket/No Bracket (Rated up to 75W) NHRIC-27QAT: IC Air-Tight Shallow Remodel (Rated up to 75W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTM-52](https://noralighting.com/product/ntm-52/) - 6" BR/PAR30 Gimbal Ring with Metal Trim for Line Voltage Recessed Housings. Rated up to 75W and compatible with LED lamps. Compatible Housings: NFBIC-6INCATA: IC Air-Tight Fire Rated New Construction (Rated up to 75W) NH-26Q: Non-IC New Construction (Rated up to 75W) NH-27Q: Non-IC Shallow New Construction (Rated up to 75W) NHIC-17/100DWQA: IC Air-Tight New Construction (Ratd up to 75W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 75W) NHIC-17QNBAT: IC Air-Tight New Construction w/ Floating Socket/No Bracket (Rated up to 75W) NHIC-27QAT: IC Air-Tight Shallow New Construction (Rated up to 75W) NHR-26Q: Non-IC Remodel (Rated up to 75W) NHR-27Q: Non-IC Shallow Remodel (Rated up to 75W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 75W) NHRIC-17QNBAT: IC Air-Tight Remodel w/ Floating Socket/No Bracket (Rated up to 75W) NHRIC-27QAT: IC Air-Tight Shallow Remodel (Rated up to 75W) NHIC-926/DWQAT: IC Air-Tight Double Wall New Construction Sloped (Rated up to 75W) NHIC-926QAT: IC Air-Tight New Construction Sloped (Rated up to 75W) NHRIC-926QAT: IC Air-Tight Remodel Sloped (Rated up to 75W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NT-28](https://noralighting.com/product/nt-28/) - 6" BR/PAR30 Eyeball with Metal Trim for Line Voltage Recessed Housings. Rated up to 75W and compatible with LED lamps. Compatible Housings: NFBIC-6INCATA: IC Air-Tight Fire Rated New Construction (Rated up to 75W) NH-26Q: Non-IC New Construction (Rated up to 75W) NH-27Q: Non-IC Shallow New Construction (Rated up to 75W) NHIC-17/100DWQA: IC Air-Tight New Construction (Ratd up to 75W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 75W) NHIC-17QNBAT: IC Air-Tight New Construction w/ Floating Socket/No Bracket (Rated up to 75W) NHIC-27QAT: IC Air-Tight Shallow New Construction (Rated up to 75W) NHR-26Q: Non-IC Remodel (Rated up to 75W) NHR-27Q: Non-IC Shallow Remodel (Rated up to 75W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 75W) NHRIC-17QNBAT: IC Air-Tight Remodel w/ Floating Socket/No Bracket (Rated up to 75W) NHRIC-27QAT: IC Air-Tight Shallow Remodel (Rated up to 75W) NHIC-926/DWQAT: IC Air-Tight Double Wall New Construction Sloped (Rated up to 75W) NHIC-926QAT: IC Air-Tight New Construction Sloped (Rated up to 75W) NHRIC-926QAT: IC Air-Tight Remodel Sloped (Rated up to 75W) NHIC-6G24ATFL: IC Air-Tight GU24 New Construction (Rated up to 15W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTS-41](https://noralighting.com/product/nts-41/) - 6" PAR38 Reflector for Line Voltage Recessed Housings. Rated up to 150W. Compatible Housings: NHIC-17/100DWQA: IC Air-Tight New Construction (Rated up to 100W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 100W) NH-26Q: Non-IC New Construction (Rated up to 150W) NHR-26Q: Non-IC Remodel (Rated up to 150W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTS-33](https://noralighting.com/product/nts-33/) - 6" BR/PAR30 Reflector for Line Voltage Recessed Housings. Rated up to 75W and compatible with LED lamps. Compatible Lamps: BR/PAR30 Compatible Housings: NH-26Q: Non-IC New Construction (Rated up to 75W) NH-27Q: Non-IC Shallow New Construction (Rated up to 75W) NHIC-17/100DWQA: IC Air-Tight New Construction (Ratd up to 75W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 75W) NHIC-27QAT: IC Air-Tight Shallow New Construction (Rated up to 75W) NHR-26Q: Non-IC Remodel (Rated up to 75W) NHR-27Q: Non-IC Shallow Remodel (Rated up to 75W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 75W) NHRIC-27QAT: IC Air-Tight Shallow Remodel (Rated up to 75W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTS-31HZ](https://noralighting.com/product/nts-31hz/) - 6" BR/PAR30 Reflector for Line Voltage Recessed Housings. Rated up to 75W and compatible with LED lamps. Compatible Housings: NH-26Q: Non-IC New Construction (Rated up to 75W) NH-27Q: Non-IC Shallow New Construction (Rated up to 75W) NHIC-17/100DWQA: IC Air-Tight New Construction (Ratd up to 75W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 75W) NHIC-27QAT: IC Air-Tight Shallow New Construction (Rated up to 75W) NHR-26Q: Non-IC Remodel (Rated up to 75W) NHR-27Q: Non-IC Shallow Remodel (Rated up to 75W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 75W) NHRIC-27QAT: IC Air-Tight Shallow Remodel (Rated up to 75W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTS-31](https://noralighting.com/product/nts-31/) - 6" BR/PAR30 Reflector for Line Voltage Recessed Housings. Rated up to 75W and compatible with LED lamps. Compatible Lamps: BR/PAR30 Compatible Housings: NH-26Q: Non-IC New Construction (Rated up to 75W) NH-27Q: Non-IC Shallow New Construction (Rated up to 75W) NHIC-17/100DWQA: IC Air-Tight New Construction (Ratd up to 75W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 75W) NHIC-27QAT: IC Air-Tight Shallow New Construction (Rated up to 75W) NHR-26Q: Non-IC Remodel (Rated up to 75W) NHR-27Q: Non-IC Shallow Remodel (Rated up to 75W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 75W) NHRIC-27QAT: IC Air-Tight Shallow Remodel (Rated up to 75W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTS-714](https://noralighting.com/product/nts-714/) - 6" Specular Reflector with White Plastic Ring for Line Voltage Recessed Housings. Rated up to 150W and compatible with LED lamps. Compatible Housings: NHIC-17/100DWQA: IC Air-Tight New Construction (Ratd up to 100W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 75W) NHIC-17QNBAT: IC Air-Tight New Construction w/ Floating Socket/No Bracket (Rated up to 75W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 75W) NHRIC-17QNBAT: IC Air-Tight Remodel w/ Floating Socket/No Bracket (Rated up to 75W) NH-26Q: Non-IC New Construction (Rated up to 150W) NHR-26Q: Non-IC Remodel (Rated up to 150W) NFBIC-6INCATA: Fire Rated New Construction (Rated up to 90W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTM-710](https://noralighting.com/product/ntm-710/) - 6" Air-Tight Deep Reflector with Self Flange for Line Voltage Recessed Housings. Rated up to 150W and compatible with LED lamps. Compatible Housings: NHIC-17/100DWQA: IC Air-Tight New Construction (Rated up to 100W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 90W) NHIC-17QNBAT: IC Air-Tight New Construction w/ Floating Socket/No Bracket (Rated up to 90W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 90W) NHRIC-17QNBAT: IC Air-Tight Remodel w/ Floating Socket/No Bracket (Rated up to 90W) NH-26Q: Non-IC New Construction (Rated up to 150W) NHR-26Q: Non-IC Remodel (Rated up to 150W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTM-41N](https://noralighting.com/product/ntm-41n/) - 6" BR40/PAR38 Stepped Baffle with Ring for Line Voltage Recessed Housings. Rated up to 150W. Compatible Housings: NHIC-17/100DWQA: IC Air-Tight New Construction (Rated up to 100W) NH-26Q: Non-IC New Construction (Rated up to 150W) NHR-26Q: Non-IC Remodel (Rated up to 150W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTM-41](https://noralighting.com/product/ntm-41/) - 6" BR40/PAR38 Stepped Baffle with Ring for Line Voltage Recessed Housings. Rated up to 150W. Compatible Housings: NHIC-17/100DWQA: IC Air-Tight New Construction (Rated up to 100W) NH-26Q: Non-IC New Construction (Rated up to 150W) NHR-26Q: Non-IC Remodel (Rated up to 150W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTM-41CO](https://noralighting.com/product/ntm-41co/) - 6" BR40/PAR38 Stepped Baffle with Ring for Line Voltage Recessed Housings. Rated up to 150W. Compatible Housings: NHIC-17/100DWQA: IC Air-Tight New Construction (Rated up to 100W) NH-26Q: Non-IC New Construction (Rated up to 150W) NHR-26Q: Non-IC Remodel (Rated up to 150W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTM-41BZ](https://noralighting.com/product/ntm-41bz/) - 6" BR40/PAR38 Stepped Baffle with Ring for Line Voltage Recessed Housings. Rated up to 150W. Compatible Housings: NHIC-17/100DWQA: IC Air-Tight New Construction (Rated up to 100W) NH-26Q: Non-IC New Construction (Rated up to 150W) NHR-26Q: Non-IC Remodel (Rated up to 150W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTM-40](https://noralighting.com/product/ntm-40/) - 6" BR40/PAR38 Stepped Baffle with Ring for Line Voltage Recessed Housings. Rated up to 150W. Compatible Housings: NHIC-17/100DWQA: IC Air-Tight New Construction (Rated up to 100W) NH-26Q: Non-IC New Construction (Rated up to 150W) NHR-26Q: Non-IC Remodel (Rated up to 150W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTM-34](https://noralighting.com/product/ntm-34/) - 6" BR/PAR30 Stepped Baffle Trim with Ring for Line Voltage Recessed Housings. Rated up to 75W and compatible with LED lamps. Compatible Housings: NH-26Q: Non-IC New Construction (Rated up to 75W) NH-27Q: Non-IC Shallow New Construction (Rated up to 75W) NHIC-17/100DWQA: IC Air-Tight New Construction (Ratd up to 75W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 75W) NHIC-27QAT: IC Air-Tight Shallow New Construction (Rated up to 75W) NHR-26Q: Non-IC Remodel (Rated up to 75W) NHR-27Q: Non-IC Shallow Remodel (Rated up to 75W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 75W) NHRIC-27QAT: IC Air-Tight Shallow Remodel (Rated up to 75W) Mounting: Coil Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTM-33](https://noralighting.com/product/ntm-33/) - 6" BR/PAR30 Stepped Baffle Trim with Ring for Line Voltage Recessed Housings. Rated up to 75W and compatible with LED lamps. Compatible Housings: NH-26Q: Non-IC New Construction (Rated up to 75W) NH-27Q: Non-IC Shallow New Construction (Rated up to 75W) NHIC-17/100DWQA: IC Air-Tight New Construction (Ratd up to 75W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 75W) NHIC-27QAT: IC Air-Tight Shallow New Construction (Rated up to 75W) NHR-26Q: Non-IC Remodel (Rated up to 75W) NHR-27Q: Non-IC Shallow Remodel (Rated up to 75W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 75W) NHRIC-27QAT: IC Air-Tight Shallow Remodel (Rated up to 75W) Mounting: Coil Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTM-32](https://noralighting.com/product/ntm-32/) - 6" BR/PAR30 Stepped Baffle Trim with Ring for Line Voltage Recessed Housings. Rated up to 75W and compatible with LED lamps. Compatible Housings: NH-26Q: Non-IC New Construction (Rated up to 75W) NH-27Q: Non-IC Shallow New Construction (Rated up to 75W) NHIC-17/100DWQA: IC Air-Tight New Construction (Ratd up to 75W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 75W) NHIC-27QAT: IC Air-Tight Shallow New Construction (Rated up to 75W) NHR-26Q: Non-IC Remodel (Rated up to 75W) NHR-27Q: Non-IC Shallow Remodel (Rated up to 75W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 75W) NHRIC-27QAT: IC Air-Tight Shallow Remodel (Rated up to 75W) Mounting: Coil Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTP-31](https://noralighting.com/product/ntp-31/) - 6" BR30/PAR30 White Phenolic (Plastic) Stepped Baffle with White Plastic Ring rated up to 150W max. Compatible Housings: NH-26Q: Non-IC New Construction (Rated up to 50W) NHR-26Q: Non-IC Remodel (Rated up to 50W) NHIC-17/100DWQA: IC Air-Tight Double Wall New Construction (Rated up to 50W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 50W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 50W) NHIC-17QNBAT: IC Air-Tight New Construction (Rated up to 50W) NHRIC-17QNBAT: IC Air-Tight Remodel (Rated up to 50W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTM-30](https://noralighting.com/product/ntm-30/) - 6" BR/PAR30 Stepped Baffle Trim with Ring for Line Voltage Recessed Housings. Rated up to 75W and compatible with LED lamps. Compatible Housings: NH-26Q: Non-IC New Construction (Rated up to 75W) NH-27Q: Non-IC Shallow New Construction (Rated up to 75W) NHIC-17/100DWQA: IC Air-Tight New Construction (Ratd up to 75W) NHIC-17QAT: IC Air-Tight New Construction (Rated up to 75W) NHIC-27QAT: IC Air-Tight Shallow New Construction (Rated up to 75W) NHR-26Q: Non-IC Remodel (Rated up to 75W) NHR-27Q: Non-IC Shallow Remodel (Rated up to 75W) NHRIC-17QAT: IC Air-Tight Remodel (Rated up to 75W) NHRIC-27QAT: IC Air-Tight Shallow Remodel (Rated up to 75W) Mounting: Coil Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NHRIC-928QAT](https://noralighting.com/product/nhric-928qat/) - Remodel housing for pitched ceilings ranging from 7/12 to 12/12. Air-tight housing additionally reduces energy costs by decreasing the flow of air escaping through the ceiling. Rated for direct contact with insulation and adjacent ceiling structures. Minimum Clearances: "IC" Housings are direct contact rated; no minimum clearance is required Slope Angle: Pitch: Minimum Pitch: 7/12, Maximum Pitch 12/12 Angle: Miminum Angle: 30°, Maximum Angle: 45° Installation: High tension tempered steel springs secure remodel housings evenly to ceiling; hole cutout template provided for convenience. Maximum Wattage: 75W max. (wattage varies based on trim) Compatible Trims: NLRS-6S11: 6" Super Slope LED Retrofit Reflector NLRS-6S12: 6" Super Slope LED Retrofit Baffle NTM-616/45: 6" Super Slope Reflector NTM-617/45: 6" Super Slope Baffle - [NHRIC-926QAT](https://noralighting.com/product/nhric-926qat/) - IC housings for sloped ceilings offer a clear path of unobstructed light from a 6/12 pitch (22-1/2 degree) ceiling to any floor or work plane. Airtight housing additionally reduces energy costs by decreasing the flow of air escaping through the ceiling. Rated for direct contact with insulation and adjacent ceiling structures, Nora’s sloped IC housings are easy and quick to install and accept standard down light or adjustable finishing trims. Also available as remodel. Minimum Clearances: "IC" Housings are direct contact rated; no minimum clearance is required Slope Angle: Pitch: Minimum Pitch: 1/12, Maximum Pitch 6/12 Angle: Miminum Angle: 4.75°, Maximum Angle: 26.5° Installation: High tension tempered steel springs secure remodel housings evenly to ceiling; hole cutout template provided for convenience. Maximum Wattage: 75W (actual wattage varies with trim) - [NHIC-928QAT](https://noralighting.com/product/nhic-928qat/) - New construction housing for pitched ceilings ranging from 7/12 to 12/12. Air-tight housing additionally reduces energy costs by decreasing the flow of air escaping through the ceiling. Rated for direct contact with insulation and adjacent ceiling structures. Minimum Clearances: "IC" Housings are direct contact rated; no minimum clearance is required Slope Angle: Pitch: Minimum Pitch: 7/12, Maximum Pitch 12/12 Angle: Miminum Angle: 30°, Maximum Angle: 45° Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2". Bar hangers are slotted for T-bar installation and include captive nails. Maximum Wattage: 75W max. (wattage varies based on trim) Compatible Trims: NLRS-6S11: 6" Super Slope LED Retrofit Reflector NLRS-6S12: 6" Super Slope LED Retrofit Baffle NTM-616/45: 6" Super Slope Reflector NTM-617/45: 6" Super Slope Baffle - [NHIC-926QAT](https://noralighting.com/product/nhic-926qat/) - Sloped ceilings offer a clear path of unobstructed light from a 6/12 pitch (22-1/2 degree) ceiling to any floor or work plane. Airtight housing additionally reduces energy costs by decreasing the flow of air escaping through the ceiling. Rated for direct contact with insulation and adjacent ceiling structures, Nora’s sloped IC housings are easy and quick to install and accept standard down light or adjustable finishing trims. Also available as remodel. Minimum Clearances: "IC" Housings are direct contact rated; no minimum clearance is required Slope Angle: Pitch: Minimum Pitch: 2/12, Maximum Pitch 6/12 Angle: Miminum Angle: 4.75°, Maximum Angle: 26.5° Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be repositioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Maximum Wattage: 75W (actual wattage varies with trim) - [NHIC-926DWQAT](https://noralighting.com/product/nhic-926dwqat/) - IC double wall housing for sloped ceilings offers a clear path of unobstructed light from a 6/12 pitch (22-1/2 degree) ceiling to any floor or work plane. Double wall construction allows use of larger PAR38/R40 light source to deliver more illumination and provide a better finished appearance. Rated for direct contact with insulation and adjacent ceiling structures, Nora’s sloped IC housings are easy and quick to install and accept standard down light or adjustable finishing trims. Minimum Clearances: “IC” Housings are direct contact rated; no minimum clearance is required Slope Angle: Pitch: Minimum Pitch: 2/12, Maximum Pitch 6/12 Angle: Miminum Angle: 4.75°, Maximum Angle: 26.5° Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be repositioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Maximum Wattage: 100W (actual wattage varies with trim) - [NFBIC-6INCATA](https://noralighting.com/product/nfbic-6incata/) - Specification grade fire-rated new construction housing. The double wall fixture incorporates a non-combustible fiber insulation to prevent passage of flames, toxic gases, ignitable gasses into ceiling plenums. The cULus listed housing is rated for a minimum of two hours protection. Suitable for commercial, multi-family and residential applications. Fire Rating: cULus two-hour fire rated classification. Housings are direct contact rated; no minimum clearance is required Socket Plate: Socket plate adjusts inside housing and can be removed in the field to convert to a floating socket Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be repositioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Maximum Wattage: 90W (actual wattage varies with trim) - [NHR-27Q](https://noralighting.com/product/nhr-27q/) - Shallow ceiling remodel housings are ideal for locations with 6” joists and tighter ceiling clearances. Nora’s remodel housings install into existing drywall or wood ceilings with no above access and accept a wide variety of high quality, attractive low profile trims. Minimum Clearances: Non-IC housings require minimum clearances of 3" from thermal insulation and 1/2" from adjacent building components Socket Plate: Socket plate adjusts inside housing and can be removed in the field to convert to a floating socket Installation: High tension tempered steel springs secure remodel housings evenly to ceiling; hole cutout template provided for convenience. Maximum Wattage: 75W (actual wattage varies with trim) - [NH-27Q](https://noralighting.com/product/nh-27q/) - Shallow ceiling housings are ideal for locations with 6" joists and tighter ceiling clearances. Nora’s shallow ceiling housings accept a wide variety of low profile trims. Minimum Clearances: Non-IC housings require minimum clearances of 3" from thermal insulation and 1/2" from adjacent building components Socket Plate: Socket plate adjusts inside housing and can be removed in the field to convert to a floating socket Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be repositioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Maximum Wattage: 75W (actual wattage varies with trim) - [NHRIC-27QAT](https://noralighting.com/product/nhric-27qat/) - Shallow ceiling remodel housings are ideal for locations with 6" joists and tighter ceiling clearances. IC Recessed housings are high quality, light weight units ideal for use in insulated ceilings. Air-tight construction reduces energy costs by reducing the amount of air escaping through the ceiling. Rated for direct contact with insulation (except spay foam insulation) and combustive materials. Nora’s remodel housings install into existing drywall or wood ceilings with no above access and accept a wide variety of high quality, attractive low profile trims. Minimum Clearances: “IC” Housings are direct contact rated; no minimum clearance is required Socket Plate: Socket plate adjusts inside housing and can be removed in the field to convert to a floating socket Installation: High tension tempered steel springs secure remodel housings evenly to ceiling; hole cutout template provided for convenience. Maximum Wattage: 75W (actual wattage varies with trim) - [NH-26Q](https://noralighting.com/product/nh-26q/) - Universal recessed housing is the base standard for incandescent recessed fixtures. Designed for non-IC applications, it offers the widest range and variety of high quality, attractive finishing trims for lamps ranging from simple A-Type to larger PAR sources. Minimum Clearances: Non-IC housings require minimum clearances of 3" from thermal insulation and 1/2" from adjacent building components Socket Plate: Socket plate adjusts inside housing and can be removed in the field to convert to a floating socket Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be re-positioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Maximum Wattage: 150W (actual wattage varies with trim) - [NHRIC-17QNBAT](https://noralighting.com/product/nhric-17qnbat/) - Recessed IC remodel housings are high quality, light weight airtight units ideal for use in insulated ceilings. Rated for direct contact with insulation and combustive materials, Nora’s remodel housings install into existing drywall or wood ceilings with no above access and accept a wide variety of high quality, attractive finishing trims. Minimum Clearances: “IC” Housings are direct contact rated; no minimum clearance is required Floating Socket: Socket is free floating and installs on trim Installation: High tension tempered steel springs secure remodel housings evenly to ceiling; hole cutout template provided for convenience. Maximum Wattage: 90W (actual wattage varies with trim) - [NHRIC-17QAT](https://noralighting.com/product/nhric-17qat/) - Recessed IC remodel housings are high quality, light weight airtight units ideal for use in insulated ceilings. Rated for direct contact with insulation and combustive materials, Nora’s remodel housings install into existing drywall or wood ceilings with no above access and accept a wide variety of high quality, attractive finishing trims. Minimum Clearances: “IC” Housings are direct contact rated; no minimum clearance is required Socket Plate: Socket plate adjusts inside housing and can be removed in the field to convert to a floating socket Installation: High tension tempered steel springs secure remodel housings evenly to ceiling; hole cutout template provided for convenience. Maximum Wattage: 90W (actual wattage varies with trim) - [NHIC-17/100DWQA](https://noralighting.com/product/nhic-17-100dwqa/) - IC Recessed housings are high quality, light weight units ideal for use in insulated ceilings. Air-tight construction reduces energy costs by reducing the amount of air escaping through the ceiling. Rated for direct contact with insulation (except spay foam insulation) and combustive materials, IC housings are easy and quick to install and accept a wide variety of high quality, attractive finishing trims. Minimum Clearances: “IC” Housings are direct contact rated; no minimum clearance is required Socket Plate: Socket plate adjusts inside housing and can be removed in the field to convert to a floating socket Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be repositioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Maximum Wattage: 100W (actual wattage varies with trim) - [NT-5023](https://noralighting.com/product/nt-5023/) - 5" Fresnel Lens with Metal Trim and Bracket rated up to 40W max. Compatible Housings: NHIC-501QAT: IC Air-Tight New Construction (Rated up to 40W) NHRIC-504QAT: IC Air-Tight Remodel (Rated up to 40W) Mounting: Torsion Springs Listing: cULus Listed for Wet Location when used with Compatible Housing - [NT-5022](https://noralighting.com/product/nt-5022/) - 5" Albalite Lens with Metal Trim and Bracket rated up to 40W max. Compatible Housings: NHIC-501QAT: IC Air-Tight New Construction (Rated up to 40W) NHRIC-504QAT: IC Air-Tight Remodel (Rated up to 40W) Mounting: Torsion Springs Listing: cULus Listed for WetLocation when used with Compatible Housing - [NTM-526](https://noralighting.com/product/ntm-526/) - 5" PAR30 Lensless Shower Baffle Cone rated up to 75W max. Compatible Housings: NHIC-501QAT: IC Air-Tight New Construction (Rated up to 75W) NHRIC-504QAT: IC Air-Tight Remodel (Rated up to 75W) Mounting: Torsion Springs Listing: cULus Listed for Wet Location when used with Compatible Housing - [NT-5061](https://noralighting.com/product/nt-5061/) - 5" Stepped Baffle with Adjustable Gimbal Lamp: 75W PAR30 max. Compatible Housings: NHIC-501QAT: IC Air-Tight New Construction (Rated up to 75W) NHRIC-504QAT: IC Air-Tight Remodel (Rated up to 75W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NT-5070](https://noralighting.com/product/nt-5070/) - 5" BR/PAR30 Eyeball with Metal Trim rated up to 75W max. Compatible Housings: NHIC-501QAT: IC Air-Tight New Construction (Rated up to 75W) NHRIC-504QAT: IC Air-Tight Remodel (Rated up to 75W) NFBIC-5INCATA: IC Air-Tight Fire Rated (Rated up to 75W) NHIC-527QAT: Shallow IC Air-Tight New Construction (Rated up to 50W) NHRIC-527QAT: Shallow IC Air-Tight Remodel (Rated up to 50W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NT-5060](https://noralighting.com/product/nt-5060/) - 5" PAR30 Gimbal Ring with Metal Trim rated up to 75W max. Compatible Housings: NHIC-501QAT: IC Air-Tight New Construction (Rated up to 75W) NHRIC-504QAT: IC Air-Tight Remodel (Rated up to 75W) NFBIC-5INCATA: IC Air-Tight Fire Rated (Rated up to 75W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NT-5012](https://noralighting.com/product/nt-5012/) - 5" Deep Phenolic (Plastic) Baffle with Ring rated up to 75W max. Compatible Housings: NHIC-501QAT: IC Air-Tight New Construction (Rated up to 75W) NHRIC-504QAT: IC Air-Tight Remodel (Rated up to 75W) NFBIC-5INCATA: IC Air-Tight Fire Rated (Rated up to 75W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NT-5010](https://noralighting.com/product/nt-5010/) - 5" Stepped Baffle with Metal Ring and Bracket rated up to 75W max. Compatible Housings: NHIC-501QAT: IC Air-Tight New Construction (Rated up to 50W) NHRIC-504QAT: IC Air-Tight Remodel (Rated up to 50W) NFBIC-5INCATA: IC Air-Tight Fire Rated (Rated up to 75W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NT-5001](https://noralighting.com/product/nt-5001/) - 5" Baffle Splay Trim with Flange rated up to 75W max. Compatible Housings: NHIC-501QAT: IC Air-Tight New Construction (Rated up to 75W) NHRIC-504QAT: IC Air-Tight Remodel (Rated up to 75W) NFBIC-5INCATA: IC Air-Tight Fire Rated (Rated up to 75W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTM-513](https://noralighting.com/product/ntm-513/) - 5" BR30/PAR30 Air-Tight Baffle Cone with White Flange rated up to 75W max. Compatible Housings: NHIC-501QAT: IC Air-Tight New Construction (Rated up to 75W) NHRIC-504QAT: IC Air-Tight Remodel (Rated up to 75W) NHIC-527QAT: Shallow IC Air-Tight New Construction (Rated up to 50W) NHRIC-527QAT: Shallow IC Air-Tight Remodel (Rated up to 50W) NFBIC-5INCATA: IC Air-Tight Fire Rated (Rated up to 75W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NT-5000](https://noralighting.com/product/nt-5000/) - 5" Metal Splay Trim with Bracket rated up to 75W max. Compatible Housings: NHIC-501QAT: IC Air-Tight New Construction (Rated up to 75W) NHRIC-504QAT: IC Air-Tight Remodel (Rated up to 75W) NFBIC-5INCATA: IC Air-Tight Fire Rated (Rated up to 75W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NTM-5857](https://noralighting.com/product/ntm-5857/) - 5" BR30/PAR30 Square Reflector rated up to 75W max. Compatible Housings: NHIC-501QAT: IC Air-Tight New Construction (Rated up to 75W) NHRIC-504QAT: IC Air-Tight Remodel (Rated up to 75W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NT-5021](https://noralighting.com/product/nt-5021/) - 5" Reflector with White Ring rated up to 60W max. Compatible Housings: NHIC-501QAT: IC Air-Tight New Construction (Rated up to 40W) NHRIC-504QAT: IC Air-Tight Remodel (Rated up to 40W) NFBIC-5INCATA: IC Air-Tight Fire Rated (Rated up to 60W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NT-5020](https://noralighting.com/product/nt-5020/) - 5" Specular Reflector with White Metal Ring rated up to 75W max. Compatible Housings: NHIC-501QAT: IC Air-Tight New Construction (Rated up to 75W) NHRIC-504QAT: IC Air-Tight Remodel (Rated up to 75W) NFBIC-5INCATA: IC Air-Tight Fire Rated (Rated up to 75W) Mounting: Torsion Springs Listing: cULus Listed for Damp Location when used with Compatible Housing - [NFBIC-5INCATA](https://noralighting.com/product/nfbic-5incata/) - Specification grade fire-rated new construction housing. The double wall fixture incorporates a non-combustible fiber insulation to prevent passage of flames, toxic gases, ignitable gasses into ceiling plenums. The cULus listed housing is rated for a minimum of two hours protection. Suitable for commercial, multi-family and residential applications. Fire Rating: cULus two-hour fire rated classification. Housings are direct contact rated; no minimum clearance is required Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be repositioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Maximum Wattage: 75W (actual wattage varies with trim) - [NHRIC-527QAT](https://noralighting.com/product/nhric-527qat/) - Universal recessed housing is the base standard for line voltage recessed fixtures. Designed for IC applications, it offers the widest range and variety of high quality, attractive finishing trims for lamps ranging from simple A-type to larger PAR sources. Minimum Clearances: Direct contact allowed; no clearances are required Ceiling Thickness: Accepts 3/8"-1-3/8" to accommodate various ceiling thicknesses Lamp Position: Socket clips directly to back of trim for perfect 90º vertical alignment of lamp socket. Socket is automatically positioned for optimum performance and lamp position consistency when socket is installed on trim or reflector. Installation: High tensions tempered steel springs secure remodel housings evenly to ceiling; hole cutout template provided for convenience Junction Box: Junction box is listed for through branch circuit wiring and contains seven 1/2" knockouts and four Romex® with strain relief Electrical: Quick Connector provided Maximum Wattage: 50W (actual wattage varies with trim) Dimensions: Length: 13-1/4" Width: 5-1/2" Depth: 5-7/8" Ceiling Opening: 5-5/8" Listings: cULus Damp Location w/ Feed Through cULus Wet Location (only with designated trims) WSEC ASTM E283 for Air-Tight - [NHRIC-504QAT](https://noralighting.com/product/nhric-504qat/) - Recessed IC remodel housings are high quality, light weight airtight units ideal for use in insulated ceilings. Rated for direct contact with insulation and combustive materials, Nora’s remodel housings install into existing drywall or wood ceilings with no above access and accept a wide variety of high quality, attractive finishing trims. Minimum Clearances: “IC” Housings are direct contact rated; no minimum clearance is required Floating Socket: Socket is free floating and installs on trim Installation: High tension tempered steel springs secure remodel housings evenly to ceiling; hole cutout template provided for convenience. Maximum Wattage: 75W (actual wattage varies with trim) - [NS-12](https://noralighting.com/product/ns-12/) - Metal trim with gimbal that can be adjusted up to 20°. Adjustable gimbal allows lamp to be mounted flush with trim. Compatible Housings: NFBIC-4INCATA: 2-Hour Fire Rated New Construction (Rated up to 35W) NS-401QAT: Non-IC Air-Tight New Construction (Rated up to 50W) NSIC-401QAT: IC Air-Tight New Construction (Rated up to 50W) NSR-404QAT: Non-IC Air-Tight New Construction (Rated up to 50W) NSRIC-404QAT: IC Air-Tight New Construction (Rated up to 50W) Lamp: 50W R20/PAR20 Maximum Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NS-27](https://noralighting.com/product/ns-27/) - High grade Frosted lens with clear center attached to metal trim. Compatible Housings: NS-401QAT: Non-IC Air-Tight New Construction (Rated up to 50W) NSIC-401QAT: IC Air-Tight New Construction (Rated up to 50W) NSR-404QAT: Non-IC Air-Tight New Construction (Rated up to 50W) NSRIC-404QAT: IC Air-Tight New Construction (Rated up to 50W) Lamp: 50W R20/PAR20 Maximum Mounting: Trim Clips Listing: cULus Listed for Wet Location when used with Compatible Housing - [NS-4926](https://noralighting.com/product/ns-4926/) - 4" High grade frosted flat lens attached to square metal trim. Compatible Housings: NS-401QAT: Non-IC Air-Tight New Construction (Rated up to 50W) NSIC-401QAT: IC Air-Tight New Construction (Rated up to 50W) NSR-404QAT: Non-IC Air-Tight Remodel (Rated up to 50W) NSRIC-404QAT: IC Air-Tight Remodel (Rated up to 50W) Lamp: 50W R20/PAR20 Maximum Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NS-26](https://noralighting.com/product/ns-26/) - High grade Frosted flat lens attached to metal trim. Compatible Housings: NS-401AT/IC: Non-IC Air-Tight New Construction (Rated up to 15W) NS-401QAT: Non-IC Air-Tight New Construction (Rated up to 50W) NSIC-401QAT: IC Air-Tight New Construction (Rated up to 50W) NSR-404QAT: Non-IC Air-Tight New Construction (Rated up to 50W) NSRIC-404QAT: IC Air-Tight New Construction (Rated up to 50W) Lamp: 50W R20/PAR20 Maximum Mounting: Trim Clips Listing: cULus Listed for Wet Location when used with Compatible Housing - [NS-22](https://noralighting.com/product/ns-22/) - High grade Albalite lens attached to metal trim. Compatible Housings: NS-401QAT: Non-IC Air-Tight New Construction (Rated up to 50W) NSIC-401QAT: IC Air-Tight New Construction (Rated up to 50W) NSR-404QAT: Non-IC Air-Tight New Construction (Rated up to 50W) NSRIC-404QAT: IC Air-Tight New Construction (Rated up to 50W) Lamp: 50W R20/PAR20 Maximum Mounting: Trim Clips Listing: cULus Listed for Wet Location when used with Compatible Housing - [NS-47](https://noralighting.com/product/ns-47/) - Metal trim with 1-3/8" x 2-1/4" slot aperture that can rotate 358° horizontally. Separate trim ring available in metal, may also be used with custom combination of plastic or metal ring finishes. Compatible Housings: NS-401QAT: Non-IC Air-Tight New Construction (Rated up to 50W) NSIC-401QAT: IC Air-Tight New Construction (Rated up to 50W) NSR-404QAT: Non-IC Air-Tight New Construction (Rated up to 50W) NSRIC-404QAT: IC Air-Tight New Construction (Rated up to 50W) Lamp: 50W R20/PAR20 Maximum Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NS-4912](https://noralighting.com/product/ns-4912/) - 4" Metal trim with gimbal that can be adjusted up to 20°. Adjustable gimbal allows lamp to be mounted flush with trim. Compatible Housings: NS-401QAT: Non-IC Air-Tight New Construction (Rated up to 50W) NSIC-401QAT: IC Air-Tight New Construction (Rated up to 50W) NSR-404QAT: Non-IC Air-Tight Remodel (Rated up to 50W) NSRIC-404QAT: IC Air-Tight Remodel (Rated up to 50W) Lamp: 50W R20/PAR20 Maximum Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NS-4910](https://noralighting.com/product/ns-4910/) - 4" die cast aluminum flange provides sharp clean corners. Non-reflective painted finishes and square trim. Compatible Housings: NS-401QAT: Non-IC Air-Tight New Construction (Rated up to 50W) NSIC-401QAT: IC Air-Tight New Construction (Rated up to 50W) NSR-404QAT: Non-IC Air-Tight Remodel (Rated up to 50W) NSRIC-404QAT: IC Air-Tight Remodel (Rated up to 50W) Lamp: 50W R20/PAR20 Maximum Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NS-76](https://noralighting.com/product/ns-76/) - Precision spun 0.040 aluminum baffle with deep grooves to reduce aperture glare rated for wet location when used with compatible housings. Compatible Housings: NFBIC-4INCATA: 2-Hour Fire Rated New Construction (Rated up to 35W) NS-401QAT: Non-IC Air-Tight New Construction (Rated up to 50W) NSIC-401QAT: IC Air-Tight New Construction (Rated up to 50W) NSR-404QAT: Non-IC Air-Tight Remodel (Rated up to 50W) NSRIC-404QAT: IC Air-Tight Remodel (Rated up to 50W) Lamp: 50W R20/PAR20 Maximum Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NS-41](https://noralighting.com/product/ns-41/) - Precision spun 0.040 baffle with deep grooves to reduce aperture glare. Non-reflective painted finishes. Compatible Housings: NFBIC-4INCATA: 2-Hour Fire Rated New Construction (Rated up to 35W) NS-401QAT: Non-IC Air-Tight New Construction (Rated up to 50W) NSIC-401QAT: IC Air-Tight New Construction (Rated up to 50W) NSR-404QAT: Non-IC Air-Tight New Construction (Rated up to 50W) NSRIC-404QAT: IC Air-Tight New Construction (Rated up to 50W) Lamp: 50W R20/PAR20 Maximum Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NS-40P](https://noralighting.com/product/ns-40p/) - Precision spun 0.040 baffle with deep grooves to reduce aperture glare. Non-reflective painted finishes. Compatible Housings: NS-401QAT: Non-IC Air-Tight New Construction (Rated up to 50W) NSIC-401QAT: IC Air-Tight New Construction (Rated up to 50W) NSR-404QAT: Non-IC Air-Tight New Construction (Rated up to 50W) NSRIC-404QAT: IC Air-Tight New Construction (Rated up to 50W) Lamp: 50W R20/PAR20 Maximum Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NS-40](https://noralighting.com/product/ns-40/) - Precision spun 0.040 baffle with deep grooves to reduce aperture glare. Non-reflective painted finishes. Compatible Housings: NFBIC-4INCATA: 2-Hour Fire Rated New Construction (Rated up to 35W) NS-401QAT: Non-IC Air-Tight New Construction (Rated up to 50W) NSIC-401QAT: IC Air-Tight New Construction (Rated up to 50W) NSR-404QAT: Non-IC Air-Tight New Construction (Rated up to 50W) NSRIC-404QAT: IC Air-Tight New Construction (Rated up to 50W) Lamp: 50W R20/PAR20 Maximum Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NS-4857](https://noralighting.com/product/ns-4857/) - 4” die cast aluminum flange provides sharp clean corners. Non-reflective painted finishes and square trim. Compatible Housings: NS-401QAT: Non-IC Air-Tight New Construction (Rated up to 50W) NSIC-401QAT: IC Air-Tight New Construction (Rated up to 50W) NSR-404QAT: Non-IC Air-Tight Remodel (Rated up to 50W) NSRIC-404QAT: IC Air-Tight Remodel (Rated up to 50W) Lamp: 50W R20/PAR20 Maximum Mounting: Trim Clips Listing: cULus Listed for Damp Location when used with Compatible Housing - [NFBIC-4INCATA](https://noralighting.com/product/nfbic-4incata/) - Specification grade fire-rated new construction housing. The double wall fixture incorporates a non-combustible fiber insulation to prevent passage of flames, toxic gases, ignitable gasses into ceiling plenums. The cULus listed housing is rated for a minimum of two hours protection. Suitable for commercial, multi-family and residential applications. Fire Rating: cULus two-hour fire rated classification. Housings are direct contact rated; no minimum clearance is required Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be repositioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Maximum Wattage: 35W (actual wattage varies with trim) - [NSR-404QAT](https://noralighting.com/product/nsr-404qat/) - 4" recessed housings deliver ultra-high design quality in any application with minimal apertures ideal for R/PAR20, PAR16 designer light sources. Available in both standard and energy savings airtight configurations, Nora’s 4" remodel housings install into existing drywall or wood ceilings with no above access and accept a wide variety of high quality, attractive trims. Minimum Clearances: Non-IC housings require minimum clearances of 3" from thermal insulation and 1/2" from adjacent building components Socket Plate: Socket plate adjusts inside housing and can be removed in the field to convert to a floating socket Installation: High tension tempered steel springs secure remodel housings evenly to ceiling; hole cutout template provided for convenience. Maximum Wattage: 50W (can be labeled for lower wattages) - [NSRIC-404QAT](https://noralighting.com/product/nsric-404qat/) - Recessed IC remodel housings are high quality, light weight airtight units ideal for use in insulated ceilings. Rated for direct contact with insulation and combustive materials, Nora’s remodel housings install into existing drywall or wood ceilings with no above access and accept a wide variety of high quality, attractive finishing trims. Minimum Clearances: “IC” Housings are direct contact rated; no minimum clearance is required Socket Plate: Socket plate adjusts inside housing and can be removed in the field to convert to a floating socket Installation: High tension tempered steel springs secure remodel housings evenly to ceiling; hole cutout template provided for convenience. Maximum Wattage: 50W - [NSIC-401QAT](https://noralighting.com/product/nsic-401qat/) - IC Recessed housings are high quality, light weight units ideal for use in insulated ceilings. Air-tight construction reduces energy costs by reducing the amount of air escaping through the ceiling. Rated for direct contact with insulation (except spay foam insulation) and combustive materials, IC housings are easy and quick to install and accept a wide variety of high quality, attractive finishing trims. Minimum Clearances: “IC” Housings are direct contact rated; no minimum clearance is required Socket Plate: Socket plate adjusts inside housing and can be removed in the field to convert to a floating socket Bar Hangers: Bar hangers are adjustable from 13-5/8" to 24-1/2" and can be repositioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails. Maximum Wattage: 50W (can be labeled for lower wattages) - [NIOP-2RTC](https://noralighting.com/product/niop-2rtc/) - The iPOINT LED monopoint is the newest addition to the Iolite family. iPOINT luminaires require an Iolite housing, allowing the fixture to maintain a minimal canopy and sleek appearance. iPOINT fixtures produce from 750 to 1200 lumens at 90+ CRI with a choice of three kelvin temperatures from 2700K, 3000K or 4000K. Similar to Iolite reflectors, each iPOINT includes spot, narrow flood and flood optics which can be easily changed in the field. iPOINT is available in Cylinder or Cone styles in black or matte powder white. Features Small appearance resembles a monopoint fixture LED COB technology Field changeable optics (three included) 5-Year limited warranty Lumens / Wattage: 1200lm / 14W Color Temperature: 2700K, 3000K, or 4000K CRI: 90+ Finish: Black or Matte Powder White Compatible Housings: NHIOICD-28 - 2" New Construction NHRIOIC-28 - 2" Remodel - [NIOP-1RTC](https://noralighting.com/product/niop-1rtc/) - The iPOINT LED monopoint is the newest addition to the Iolite family. iPOINT luminaires require an Iolite housing, allowing the fixture to maintain a minimal canopy and sleek appearance. iPOINT fixtures produce from 750 to 1200 lumens at 90+ CRI with a choice of three kelvin temperatures from 2700K, 3000K or 4000K. Similar to Iolite reflectors, each iPOINT includes spot, narrow flood and flood optics which can be easily changed in the field. iPOINT is available in Cylinder or Cone styles in black or matte powder white. Features Small appearance resembles a monopoint fixture LED COB technology Field changeable optics (three included) 5-Year limited warranty Lumens / Wattage: 900lm / 9W or 10W determined by housing Color Temperature: 2700K, 3000K, or 4000K CRI: 90+ Finish: Black or Matte Powder White Compatible Housings: NHIOICD-16 - 1" New Construction NHRIOIC-16 - 1" Remodel - [NIOP-1RCY](https://noralighting.com/product/niop-1rcy/) - The iPOINT LED monopoint is the newest addition to the Iolite family. iPOINT luminaires require an Iolite housing, allowing the fixture to maintain a minimal canopy and sleek appearance. Similar to Iolite reflectors, each iPOINT includes spot, narrow flood and flood optics which can be easily changed in the field. iPOINT is available in Cylinder or Cone styles in black or matte powder white. Features Small appearance resembles a monopoint fixture LED COB technology Field changeable optics (three included) 5-Year limited warranty Lumens / Wattage: 750lm / 9W or 10W determined by housing Color Temperature: 4000K Color Rendering Index: 90+ CRI Finish: Black or Matte Powder White Compatible Housings: NHIOICD-16 - 1" New Construction NHIOICDCP-16 - 1" Chicago Plenum NHRIOIC-16 - 1" Remodel - [NIO-TLMR-4SA](https://noralighting.com/product/nio-tlmr-4sa/) - Allows 4" Iolite trimless square reflectors to be installed even no exposed flange and no extension beyond ceiling plane. Mud ring attaches to drywall and requires professional drywall finishing. Compatible Housings: NHIOICD-48: 4" Iolite New Construction Housing, 800lm-1000lm NHIOICD-415: 4" Iolite New Construction Housing, 1500lm NHIOICD-420: 4" Iolite New Construction Housing, 2000lm NHIOICD-425: 4" Iolite New Construction Housing, 2500lm NHIOICDCP-48: 4" Iolite Chicago Plenum Housing, 800lm-1000lm NHIOICDCP-415: 4" Iolite Chicago Plenum Housing, 1500lm NHIOICDCP-420: 4" Iolite Chicago Plenum Housing, 2000lm NHIOICDCP-425: 4" Iolite Chicago Plenum Housing, 2500lm Compatible Reflectors: NIO-4STLNDC: 4" Iolite LED Square Trimless Downlight - [NIO-TLMR-4PS](https://noralighting.com/product/nio-tlmr-4ps/) - Allows 4" Iolite PLUS square trimless to be installed even no exposed flange and no extension beyond ceiling plane. Mud ring attaches to drywall and requires professional drywall finishing. Compatible Housings: NHIOICD-4PS15: 4" Iolite PLUS New Construction Housing, 1500lm NHIOICD-4PS20: 4" Iolite PLUS New Construction Housing, 2000lm NHIOICD-4PS25: 4" Iolite PLUS New Construction Housing, 2500lm NHIOICDCP-4PS15: 4" Iolite PLUS Chicago Plenum Housing, 1500lm NHIOICDCP-4PS20: 4" Iolite PLUS Chicago Plenum Housing, 2000lm NHIOICDCP-4PS25: 4" Iolite PLUS Chicago Plenum Housing, 2500lm Compatible Trimless: NIO-4PSTLNDC: 4" Iolite PLUS LED Square Trimless Downlight NIO-4PSTLA: 4" Iolite PLUS LED Square Trimless Adjustable - [NIO-TLSUCTION](https://noralighting.com/product/nio-tlsuction/) - Suction cup assist removing trimless reflector from finished ceiling after installation. For maintenance on trimless reflector. Compatible Reflectors NIO-2RTLA NIO-2RTLNDC NIO-4RTLA NIO-4RTLNDC NIO-4STLNDC - [NIO-TLMR-4RA](https://noralighting.com/product/nio-tlmr-4ra/) - Allows 4" Iolite round trimless to be installed even no exposed flange and no extension beyond ceiling plane. Mud ring attaches to drywall and requires professional drywall finishing. Compatible Housings: NHIOICD-48: 4" Iolite New Construction Housing, 800lm-1000lm NHIOICD-415: 4" Iolite New Construction Housing, 1500lm NHIOICD-420: 4" Iolite New Construction Housing, 2000lm NHIOICD-425: 4" Iolite New Construction Housing, 2500lm NHIOICDCP-48: 4" Iolite Chicago Plenum Housing, 800lm-1000lm NHIOICDCP-415: 4" Iolite Chicago Plenum Housing, 1500lm NHIOICDCP-420: 4" Iolite Chicago Plenum Housing, 2000lm NHIOICDCP-425: 4" Iolite Chicago Plenum Housing, 2500lm Compatible Trimless: NIO-4RTLNDC: 4" Iolite LED Round Trimless Downlight NIO-4RTLA: 4" Iolite LED Round Trimless Adjustable NIO-4RTSLA: 4" Iolite LED Round Trimless Adjustable Slot - [NIO-TLMR-4PR](https://noralighting.com/product/nio-tlmr-4pr/) - Allows 4" Iolite PLUS round trimless to be installed even no exposed flange and no extension beyond ceiling plane. Mud ring attaches to drywall and requires professional drywall finishing. Compatible Housings: NHIOICD-415: 4" Iolite New Construction Housing, up to 1500lm NHIOICD-420: 4" Iolite New Construction Housing, up to 2000lm NHIOICD-425: 4" Iolite New Construction Housing, up to 2500lm NHIOICDCP-415: 4" Iolite Chicago Plenum Housing, up to 1500lm NHIOICDCP-420: 4" Iolite Chicago Plenum Housing, up to 2000lm NHIOICDCP-425: 4" Iolite Chicago Plenum Housing, up to 2500lm Compatible Trimless: NIO-4PRTLNDC: 4" Iolite PLUS LED Round Trimless Downlight NIO-4PRTLA: 4" Iolite PLUS LED Round Trimless Adjustable - [NIO-4RTFA](https://noralighting.com/product/nio-4rtfa/) - 4" Iolite flange accessory converts trimless to flanged downlight. Converts to an exposed trim flange and no longer requires a trimless mud ring and drywall installation. Finish: Black, Bronze, Champagne Haze, Haze, Matte Powder White or White Compatible Trimless: NIO-4RTLNDC: 4" Iolite LED Round Trimless Downlight NIO-4RTSLA: 4" Iolite LED Round Trimless Adjustable Slot Compatible Housings: NHIOICD-48: 4" Iolite New Construction Housing, 800lm-1000lm NHIOICD-415: 4" Iolite New Construction Housing, 1500lm NHIOICD-420: 4" Iolite New Construction Housing, 2000lm NHIOICD-425: 4" Iolite New Construction Housing, 2500lm NHIOICDCP-48: 4" Iolite Chicago Plenum Housing, 800lm-1000lm NHIOICDCP-415: 4" Iolite Chicago Plenum Housing, 1500lm NHIOICDCP-420: 4" Iolite Chicago Plenum Housing, 2000lm NHIOICDCP-425: 4" Iolite Chicago Plenum Housing, 2500lm - [NIO-4PRTFA](https://noralighting.com/product/nio-4prtfa/) - 4" Iolite flange accessory converts Iolite PLUS trimless to flanged downlight. Converts to an exposed trim flange and no longer requires a trimless mud ring and drywall installation. Finish: Black, Bronze, Champagne Haze, Haze, Matte Powder White or White Compatible Trimless: NIO-4PRTLNDC: 4" Iolite PLUS LED Round Trimless Downlight NIO-4PRTLA: 4" Iolite PLUS LED Round Trimless Adjustable - [NIO-TLMR-2RA](https://noralighting.com/product/nio-tlmr-2ra/) - Allows 4" Iolite trimless round reflectors to be installed even no exposed flange and no extension beyond ceiling plane. Mud ring attaches to drywall and requires professional drywall finishing. Compatible Housings: NHIOICD-28: 2" Iolite New Construction Housing, 800lm-1000lm NHIOICDCP-28: 2" Iolite Chicago Plenum Housing, 800lm-1000lm Compatible Reflectors: NIO-2RTLNDC: 2" Iolite LED Round Trimless Downlight NIO-2RTLA: 2" Iolite LED Round Trimless Adjustable - [NIO-FMMR-1S](https://noralighting.com/product/nio-fmmr-1s/) - Allows 1" Iolite square reflectors to be installed even with the ceiling plane, with a visible flange. Mud ring attaches to drywall and requires professional drywall finishing. Compatible Housings: NHIOICD-16: 1" Iolite New Construction Housing NHIOICDCP-16: 1" Iolite Chicago Plenum Housing Compatible Reflectors: NIOB-1SNG: 1" Iolite LED Square Reflector NIOB-1SNB: 1" Iolite LED Square Bullnose - [NIO-FMMR-1R](https://noralighting.com/product/nio-fmmr-1r/) - Allows 1" Iolite round reflectors to be installed even with the ceiling plane, with a visible flange. Mud ring attaches to drywall and requires professional drywall finishing. Compatible Housings: NHIOICD-16: 1" Iolite New Construction Housing NHIOICDCP-16: 1" Iolite Chicago Plenum Housing Compatible Reflectors: NIOB-1RSL: 1" Iolite LED Round Adjustable Slot Aperture NIOB-1RPH: 1" Iolite LED Round Pinhole NIOB-1RNG: 1" Iolite LED Round Reflector NIOB-1RNB: 1" Iolite LED Round Bullnose - [NIO-1AS](https://noralighting.com/product/nio-1as/) - Translucent decorative collars fill the aperture with the specified color while producing white general downlighting. Collars are available in different lengths. Use to add interest, create a theme, match a theme or define a space. Opaque decorative collars reduce aperture brightness while preserving light output. Depth: 5/8", 3/4", 1" Translucent Finish: Blue, Frosted, Amber, Red Opaque Finish: Black, Matte Powder White, White Compatible Fixtures: NIO-1: 1" Iolite Dedicated NTF Downlights NIOB-1: 1" Iolite Dedicated BWF Downlights NIOC-1: 1" Iolite Can-less Trims - [NIO-REFLTIR15](https://noralighting.com/product/nio-refltir15/) - Premium 22º TIR optic for 2" and 4" Iolite Downlights, Iolite Multiples or Pearl Retrofit Downlights Field changeable optic creates a tight 22º narrow beam spread Compatible Fixtures: NIO-2: 2″ Iolite Dedicated Trimless Downlights NIOB-2: 2″ Iolite Dedicated Flanged Downlights NIOC-2: 2″ Iolite Can-less Trims NIO-4: 4″ Iolite Dedicated Downlights NIOC-4: 4″ Iolite Can-less Trims NMIOT: Iolite Multiple Downlights NPR-4: 4" Pearl 120V Retrofit Downlights NPRLV-4: 4" Pearl 12V Retrofit Downlights NPR-56: 5"/6" Pearl 120V Retrofit Downlights NPRLV-56: 5"/6" Pearl 12V Retrofit Downlights - [NIO-REFL38FR](https://noralighting.com/product/nio-refl38fr/) - 38º Frosted optic for 2" and 4" Iolite downlights. Optic can easily be changed in the field. Compatible Fixtures: NIO-2: 2″ Iolite Dedicated Trimless Downlights NIOB-2: 2″ Iolite Dedicated Flanged Downlights NIOC-2: 2″ Iolite Can-less Trims NIO-4: 4″ Iolite Dedicated Downlights NIOC-4: 4″ Iolite Can-less Trims NMIOT: Iolite Multiple Downlights NPR-4: 4" Pearl 120V Retrofit Downlights NPRLV-4: 4" Pearl 12V Retrofit Downlights NPR-56: 5"/6" Pearl 120V Retrofit Downlights NPRLV-56: 5"/6" Pearl 12V Retrofit Downlights - [NIO-REFLTIR25](https://noralighting.com/product/nio-refltir25/) - Premium 26º TIR optic for 2" and 4" Iolite Downlights, Iolite Multiples or Pearl Retrofit Downlights Field changeable optic creates a 26º narrow beam spread Compatible Fixtures: NIO-2: 2″ Iolite Dedicated Trimless Downlights NIOB-2: 2″ Iolite Dedicated Flanged Downlights NIOC-2: 2″ Iolite Can-less Trims NIO-4: 4″ Iolite Dedicated Downlights NIOC-4: 4″ Iolite Can-less Trims NMIOT: Iolite Multiple Downlights NPR-4: 4" Pearl 120V Retrofit Downlights NPRLV-4: 4" Pearl 12V Retrofit Downlights NPR-56: 5"/6" Pearl 120V Retrofit Downlights NPRLV-56: 5"/6" Pearl 12V Retrofit Downlights - [NIO-REFL60FR](https://noralighting.com/product/nio-refl60fr/) - 73º Frosted optic for 2" and 4" Iolite downlights. Optic can easily be changed in the field. Compatible Fixtures: NIO-2: 2″ Iolite Dedicated Trimless Downlights NIOB-2: 2″ Iolite Dedicated Flanged Downlights NIOC-2: 2″ Iolite Can-less Trims NIO-4: 4″ Iolite Dedicated Downlights NIOC-4: 4″ Iolite Can-less Trims NMIOT: Iolite Multiple Downlights NPR-4: 4" Pearl 120V Retrofit Downlights NPRLV-4: 4" Pearl 12V Retrofit Downlights NPR-56: 5"/6" Pearl 120V Retrofit Downlights NPRLV-56: 5"/6" Pearl 12V Retrofit Downlights - [NIO-1REFL60FR](https://noralighting.com/product/nio-1refl60fr/) - 60º Frosted optic for 1" Iolite downlights. Optic can easily be changed in the field. Compatible Fixtures: NIO-1: 1" Iolite Dedicated NTF Downlights NIOB-1: 1" Iolite Dedicated BWF Downlights NIOC-1LED: 1" Iolite Can-less LED Modules - [NIO-1REFL20FR](https://noralighting.com/product/nio-1refl20fr/) - 40º Frosted optic for 1" Iolite downlights. Optic can easily be changed in the field. Compatible Fixtures: NIO-1: 1" Iolite Dedicated NTF Downlights NIOB-1: 1" Iolite Dedicated BWF Downlights NIOC-1LED: 1" Iolite Can-less LED Modules - [NIO-BLED109](https://noralighting.com/product/nio-bled109/) - 10° TIR Narrow spot LED module assembly for 2" and 4" Iolite Downlight trims. Requires compatible housing the LE4 dimmable driver. Not compatible with 4" PLUS trims. Beam Spread: 10° Narrow Spot (fixed optic) Lumens / Wattage: 800-900lm / 12W Compatible 2" Trims: NIO-2RTLA: 2" Round Trimless Adjustable NIO-2RTLNDC: 2" Round Trimless Downlight NIOB-2RC: 2" Round Adjustable Cone NIOB-2RG: 2" Round Adjustable Gimbal NIOB-2RNB: 2" Round Bullnose NIOB-2RNDC: 2" Round Downlight NIOB-2RPH: 2" Round Pinhole NIOB-2RPHA: 2" Round Adjustable Pinhole NIOB-2RSL: 2" Round Adjustable Slot NIOB-2SC: 2" Square Adjustable Cone NIOB-2SG: 2" Square Adjustable Gimbal NIOB-2SNB: 2" Square Bullnose NIOB-2SNDC: 2" Square Downlight with Round Aperture NIOB-2SNDSQ: 2" Square Downlight with Square Aperture Compatible 4" Trims: NIO-4RTSLA: 4" Round Trimless Adjustable Slot NIO-4RTLA: 2" Round Trimless Adjustable NIO-4RTLNDC: 4" Round Trimless Downlight NIO-4STLNDC: 4" Square Trimless Downlight NIO-4RC: 4" Round Adjustable Cone NIO-4RD: 4" Round Adjustable Downlight NIO-4RG: 4" Round Adjustable Gimbal NIO-4RNB: 4" Round Bullnose NIO-4RNDC: 4" Round Downlight NIO-4RPH: 4" Round Pinhole NIO-4RPHA: 4" Round Adjustable Pinhole NIO-4RSL: 4" Round Adjustable Slot NIO-4SC: 4" Square Adjustable Cone NIO-4SD: 4" Square Adjustable Downlight with Round Aperture NIO-4SDSQ: 4" Square Adjustable Downlight with Square Aperture NIO-4SG: 4" Square Adjustable Gimbal NIO-4SNB: 4" Square Bullnose NIO-4SNDC: 4" Square Downlight with Round Aperture NIO-4SNDSQ: 4" Square Downlight with Square Aperture - [NIO-1EXTC2](https://noralighting.com/product/nio-1extc2/) - The ceiling extension collar allows Iolite new construction housings to be installed in ceiling thicknesses up to 2". Compatible Housings: NHIOICD-16 NHIOICDCP-16 - [NIO-2EXTC2](https://noralighting.com/product/nio-2extc2/) - The ceiling extension collar allows Iolite new construction housings to be installed in ceiling thicknesses up to 2". Compatible Housings: NHIOICD-28: 2" Iolite IC Air-Tight New Construction Housing / 14W NHIOICD-215: 2" Iolite IC Air-Tight New Construction Housing / 20W NHIOICD-220: 2" Iolite IC Air-Tight New Construction Housing / 24W NHIOICD-225: 2" Iolite IC Air-Tight New Construction Housing / 28W NHIOICDCP-28: 2" Iolite Chicago Plenum New Construction Housing / 14W NHIOICDCP-215: 2" Iolite Chicago Plenum New Construction Housing / 20W NHIOICDCP-220: 2" Iolite Chicago Plenum New Construction Housing / 24W NHIOICDCP-225: 2" Iolite Chicago Plenum New Construction Housing / 28W - [NIO-2WCC2](https://noralighting.com/product/nio-2wcc2/) - Wood ceiling collar allows Iolite new construction housings to be installed in wood ceilings Compatible Housings: NHIOICD-28: 2" Iolite New Construction Housing, 800lm-1000lm NHIOICDCP-28: 2" Iolite Chicago Plenum Housing, 800lm-1000lm Compatible Trims: NIOB-2RC: 2" Iolite Round Adjustable Cone Reflector, 1000lm max. NIOB-2RG: 2" Iolite Round Adjustable Gimbal, 1000lm max. NIOB-2RNB: 2" Iolite Round Bullnose, 1000lm max. NIOB-2RNDC: 2" Iolite Round Reflector, 1000lm max. NIOB-2RPH: 2" Iolite Round Pinhole, 1000lm max. NIOB-2RPHA: 2" Iolite Round Adjustable Pinhole, 1000lm max. NIOB-2RSL: 2" Iolite Round Adjustable Slot Aperture, 1000lm max. NIOB-2SC: 2" Iolite Square Adjustable Cone Reflector, 1000lm max. NIOB-2SG: 2" Iolite Square Adjustable Gimbal, 1000lm max. NIOB-2SNB: 2" Iolite Square Bullnose, 1000lm max. NIOB-2SNDC: 2" Iolite Square Reflector with Round Aperture, 1000lm max. NIOB-2SNDSQ: 2" Iolite Square Reflector with Square Aperture, 1000lm max. - [NIO-4WCC2](https://noralighting.com/product/nio-4wcc2/) - Wood ceiling collar allows 4" Iolite flanged trims to be installed in wood ceilings with a new construction housing. Compatible Housings: NHIOICD-48: 4" Iolite New Construction Housing, 800lm-1000lm NHIOICD-415: 4" Iolite New Construction Housing, 1500lm NHIOICD-420: 4" Iolite New Construction Housing, 2000lm NHIOICD-425: 4" Iolite New Construction Housing, 2500lm NHIOICDCP-48: 4" Iolite Chicago Plenum Housing, 800lm-1000lm NHIOICDCP-415: 4" Iolite Chicago Plenum Housing, 1500lm NHIOICDCP-420: 4" Iolite Chicago Plenum Housing, 2000lm NHIOICDCP-425: 4" Iolite Chicago Plenum Housing, 2500lm Compatible Trims: NIO-4RC: 4" Iolite Round Adjustable Cone Reflector NIO-4RG: 4" Iolite Round Adjustable Gimbal NIO-4RNB: 4" Iolite Round Bullnose NIO-4RNDC: 4" Iolite Round Reflector NIO-4RPH: 4" Iolite Round Pinhole NIO-4RPHA: 4" Iolite Round Adjustable Pinhole NIO-4RSL: 4" Iolite Round Adjustable Slot Aperture NIO-4SC: 4" Iolite Square Adjustable Cone Reflector NIO-4SG: 4" Iolite Square Adjustable Gimbal NIO-4SNB: 4" Iolite Square Bullnose NIO-4SNDC: 4" Iolite Square Reflector with Round Aperture NIO-4SNDSQ: 4" Iolite Square Reflector with Square Aperture - [NIO-4EXTC2](https://noralighting.com/product/nio-4extc2/) - The ceiling extension collar allows Iolite new construction housings to be installed in ceiling thicknesses up to 2". Compatible Housings: NHIOICD-48: 4" Iolite IC Air-Tight New Construction Housing / 14W NHIOICD-415: 4" Iolite IC Air-Tight New Construction Housing / 20W NHIOICD-420: 4" Iolite IC Air-Tight New Construction Housing / 24W NHIOICD-425: 4" Iolite IC Air-Tight New Construction Housing / 28W NHIOICDCP-48: 4" Iolite Chicago Plenum New Construction Housing / 14W NHIOICDCP-415: 4" Iolite Chicago Plenum New Construction Housing / 20W NHIOICDCP-420: 4" Iolite Chicago Plenum New Construction Housing / 24W NHIOICDCP-425: 4" Iolite Chicago Plenum New Construction Housing / 28W - [NIO-4RTSLA](https://noralighting.com/product/nio-4rtsla/) - 4" Trimless Iolite luminaires have no exposed trim flange and do not extend beyond the ceiling plane. Iolite Trimless requires a Trimless Mud Ring and New Construction housing. Regressed cone reflector optimizes visual cut-off and adjust up to 35°. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-48, NHIOICDCP-48) 1000lm / 14W (NHIOICD-48, NHIOICDCP-48) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot Required: Trimless Mud Plate (NIO-TLMR-4RA) or Flange Accessory (NIO-4RTFA) - [NIO-4RTLA](https://noralighting.com/product/nio-4rtla/) - 4" Trimless Iolite luminaires have no exposed trim flange and do not extend beyond the ceiling plane. Iolite Trimless requires a Trimless Mud Ring and New Construction housing. Regressed cone reflector optimizes visual cut-off and adjust up to 35°. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-48, NHIOICDCP-48) 1000lm / 14W (NHIOICD-48, NHIOICDCP-48) 1500lm / 20W (NHIOICD-415, NHIOICDCP-415) 2000lm / 24W (NHIOICD-420, NHIOICDCP-420) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot Required: Trimless Mud Plate (NIO-TLMR-4RA) - [NIR-4SNB](https://noralighting.com/product/nir-4snb/) - 4" retrofit bullnose reflector with a filleted aperture which allows for minimal aperture brightness while still producing the nadir footcandles. Retrofits into existing 4" medium base housings by Nora or others. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm or 1000lm / 14W Optics Included: Spot, Narrow Flood, Flood (field changeable) - [NIR-4RNB](https://noralighting.com/product/nir-4rnb/) - 4" retrofit bullnose reflector with a filleted aperture which allows for minimal aperture brightness while still producing the nadir footcandles. Retrofits into existing 4" medium base housings by Nora or others. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm or 1000lm / 14W Optics Included: Spot, Narrow Flood, Flood (field changeable) - [NIR-4SG](https://noralighting.com/product/nir-4sg/) - 4" retrofit adjustable gimbal adjusts up to 35º. Retrofits into existing 4" medium base housings by Nora or others. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm or 1000lm / 14W Optics Included: Spot, Narrow Flood, Flood (field changeable) - [NIR-4RG](https://noralighting.com/product/nir-4rg/) - 4" retrofit adjustable gimbal adjusts up to 35º. Retrofits into existing 4" medium base housings by Nora or others. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm or 1000lm / 14W Optics Included: Spot, Narrow Flood, Flood (field changeable) - [NIR-4SC](https://noralighting.com/product/nir-4sc/) - 4" retrofit regressed cone reflector optimizes visual cut-off and adjusts up to 40º. Retrofits into existing 4" medium base housings by Nora or others. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm or 1000lm / 14W Optics Included: Spot, Narrow Flood, Flood (field changeable) - [NIR-4RC](https://noralighting.com/product/nir-4rc/) - 4" retrofit regressed cone reflector optimizes visual cut-off and adjusts up to 40º. Retrofits into existing 4" medium base housings by Nora or others. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm or 1000lm / 14W Optics Included: Spot, Narrow Flood, Flood (field changeable) - [NIO-4STLNDC](https://noralighting.com/product/nio-4stlndc/) - 4" Trimless Iolite downlights have no exposed trim flange and do not extend beyond the ceiling plane. Iolite Trimless requires a Trimless Mud Ring and New Construction housing. Deep regressed cone reflectors optimize visual cut-off. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-48, NHIOICDCP-48) 1000lm / 14W (NHIOICD-48, NHIOICDCP-48) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot Required: Trimless Mud Plate (NIO-TLMR-4SA) - [NIO-4RTLNDC](https://noralighting.com/product/nio-4rtlndc/) - 4" Trimless Iolite downlights have no exposed trim flange and do not extend beyond the ceiling plane. Iolite Trimless requires a Trimless Mud Ring and New Construction housing. Deep regressed cone reflectors optimize visual cut-off. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-48, NHIOICDCP-48) 1000lm / 14W (NHIOICD-48, NHIOICDCP-48) 1500lm / 20W (NHIOICD-415, NHIOICDCP-415) 2000lm / 24W (NHIOICD-420, NHIOICDCP-420) 2500lm / 28W (NHIOICD-425, NHIOICDCP-425) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot Required: Trimless Mud Plate (NIO-TLMR-4RA) or Flange Accessory (NIO-4RTFA) Suction cup (NIO-TLSUCTION) available for removal from finished ceiling - [NIO-4SW](https://noralighting.com/product/nio-4sw/) - 4” Iolite Wall wash reflectors can be specified for use with Iolite new construction housings. Wall wash reflector to illuminate a wall evenly at a fixed angle. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-48, NHIOICDCP-48) 1000lm / 14W (NHIOICD-48, NHIOICDCP-48) 1500lm / 20W (NHIOICD-415, NHIOICDCP-415) 2000lm / 24W (NHIOICD-420, NHIOICDCP-420) Optics Included: Spot, Narrow Flood, Flood (field changeable) - [NIO-4RW](https://noralighting.com/product/nio-4rw/) - 4” Iolite Wall wash reflectors can be specified for use with Iolite new construction housings. Wall wash reflector to illuminate a wall evenly at a fixed angle. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-48, NHIOICDCP-48) 1000lm / 14W (NHIOICD-48, NHIOICDCP-48) 1500lm / 20W (NHIOICD-415, NHIOICDCP-415) 2000lm / 24W (NHIOICD-420, NHIOICDCP-420) Optics Included: Spot, Narrow Flood, Flood (field changeable) - [NIO-4SNDC](https://noralighting.com/product/nio-4sndc/) - 4” Iolite luminaires can be specified for use with Iolite new construction or remodel housings. Deep regressed cone reflectors optimize visual cut-off. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1000lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1500lm / 20W (NHIOICD-415, NHIOICDCP-415) 2000lm / 24W (NHIOICD-420, NHIOICDCP-420) 2500lm / 28W (NHIOICD-425, NHIOICDCP-425) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot - [NIO-4RNDC](https://noralighting.com/product/nio-4rndc/) - 4” Iolite luminaires can be specified for use with Iolite new construction or remodel housings. Deep regressed cone reflectors optimize visual cut-off. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1000lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1500lm / 20W (NHIOICD-415, NHIOICDCP-415) 2000lm / 24W (NHIOICD-420, NHIOICDCP-420) 2500lm / 28W (NHIOICD-425, NHIOICDCP-425) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot - [NIO-4SD](https://noralighting.com/product/nio-4sd/) - 4" Iolite luminaires can be specified for use with Iolite new construction or remodel housings. Die-cast adjustable reflectors optimize visual cut-off and adjustable to aim the light source in desired direction. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1000lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1500lm / 20W (NHIOICD-415, NHIOICDCP-415) 2000lm / 24W (NHIOICD-420, NHIOICDCP-420) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot - [NIO-4RD](https://noralighting.com/product/nio-4rd/) - 4" Iolite luminaires can be specified for use with Iolite new construction or remodel housings. Die-cast adjustable reflectors optimize visual cut-off and adjustable to aim the light source in desired direction. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1000lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1500lm / 20W (NHIOICD-415, NHIOICDCP-415) 2000lm / 24W (NHIOICD-420, NHIOICDCP-420) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot - [NIO-4RSLA](https://noralighting.com/product/nio-4rsla/) - 4” Iolite luminaires can be specified for use with Iolite new construction or remodel housings. Regressed cone construction optimizes visual cut-off and adjusts up to 30°. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1000lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1500lm / 20W (NHIOICD-415, NHIOICDCP-415) 2000lm / 24W (NHIOICD-420, NHIOICDCP-420) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot - [NIO-4RSL](https://noralighting.com/product/nio-4rsl/) - 4” Iolite luminaires can be specified for use with Iolite new construction or remodel housings. Adjustable slot aperture focus the beam spread through 2-5/8” x 2” opening. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1000lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1500lm / 20W (NHIOICD-415, NHIOICDCP-415) 2000lm / 24W (NHIOICD-420, NHIOICDCP-420) 2500lm / 28W (NHIOICD-425, NHIOICDCP-425) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot - [NIO-4RPHA](https://noralighting.com/product/nio-4rpha/) - 4” Iolite luminaires can be specified for use with Iolite new construction or remodel housings. Adjustable pinhole reflector focuses the beam spread through 2" opening and is available in a wide range of finishes. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1000lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1500lm / 20W (NHIOICD-415, NHIOICDCP-415) 2000lm / 24W (NHIOICD-420, NHIOICDCP-420) 2500lm / 28W (NHIOICD-425, NHIOICDCP-425) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot - [NIO-4RPH](https://noralighting.com/product/nio-4rph/) - 4” Iolite luminaires can be specified for use with Iolite new construction or remodel housings. Adjustable pinhole reflector focuses the beam spread through 2-5/16" opening and is available in a wide range of finishes. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1000lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1500lm / 20W (NHIOICD-415, NHIOICDCP-415) 2000lm / 24W (NHIOICD-420, NHIOICDCP-420) 2500lm / 28W (NHIOICD-425, NHIOICDCP-425) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot - [NIO-4SNB](https://noralighting.com/product/nio-4snb/) - 4" Iolite luminaires can be specified for use with Iolite new construction or remodel housings. Bullnose reflector have a filleted aperture which allows for minimal aperture brightness while still producing the nadir footcandles. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1000lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1500lm / 20W (NHIOICD-415, NHIOICDCP-415) 2000lm / 24W (NHIOICD-420, NHIOICDCP-420) 2500lm / 28W (NHIOICD-425, NHIOICDCP-425) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot - [NIO-4RNB](https://noralighting.com/product/nio-4rnb/) - 4" Iolite luminaires can be specified for use with Iolite new construction or remodel housings. Bullnose reflector have a filleted aperture which allows for minimal aperture brightness while still producing the nadir footcandles. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1000lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1500lm / 20W (NHIOICD-415, NHIOICDCP-415) 2000lm / 24W (NHIOICD-420, NHIOICDCP-420) 2500lm / 28W (NHIOICD-425, NHIOICDCP-425) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot - [NIO-4SDSQ](https://noralighting.com/product/nio-4sdsq/) - 4" Iolite luminaires can be specified for use with Iolite new construction or remodel housings. Die-cast adjustable reflectors optimize visual cut-off and adjustable to aim the light source in desired direction. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1000lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1500lm / 20W (NHIOICD-415, NHIOICDCP-415) 2000lm / 24W (NHIOICD-420, NHIOICDCP-420) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot - [NIO-4SG](https://noralighting.com/product/nio-4sg/) - 4” Iolite luminaires can be specified for use with Iolite new construction or remodel housings. Die-cast adjustable surface gimbals adjust to aim the light source in desired direction. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1000lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1500lm / 20W (NHIOICD-415, NHIOICDCP-415) 2000lm / 24W (NHIOICD-420, NHIOICDCP-420) 2500lm / 28W (NHIOICD-425, NHIOICDCP-425) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot - [NIO-4RG](https://noralighting.com/product/nio-4rg/) - 4” Iolite luminaires can be specified for use with Iolite new construction or remodel housings. Die-cast adjustable surface gimbals adjust to aim the light source in desired direction. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1000lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1500lm / 20W (NHIOICD-415, NHIOICDCP-415) 2000lm / 24W (NHIOICD-420, NHIOICDCP-420) 2500lm / 28W (NHIOICD-425, NHIOICDCP-425) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot - [NIO-4SC](https://noralighting.com/product/nio-4sc/) - 4" Iolite luminaires can be specified for use in new construction or remodel applications. Die-cast adjustable cone reflectors optimize visual cut-off and adjustable to aim the light source in desired direction. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1000lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1500lm / 20W (NHIOICD-415, NHIOICDCP-415) 2000lm / 24W (NHIOICD-420, NHIOICDCP-420) 2500lm / 28W (NHIOICD-425, NHIOICDCP-425) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot - [NIO-4RC](https://noralighting.com/product/nio-4rc/) - 4" Iolite luminaires can be specified for use in new construction or remodel applications. Die-cast adjustable cone reflectors optimize visual cut-off and adjustable to aim the light source in desired direction. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1000lm / 14W (NHIOICD-48, NHIOICDCP-48, NHRIOIC-48) 1500lm / 20W (NHIOICD-415, NHIOICDCP-415) 2000lm / 24W (NHIOICD-420, NHIOICDCP-420) 2500lm / 28W (NHIOICD-425, NHIOICDCP-425) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot - [NIO-2RTLNDC](https://noralighting.com/product/nio-2rtlndc/) - 2" Trimless Iolite downlights have no exposed trim flange and do not extend beyond the ceiling plane. Iolite Trimless requires a Trimless Mud Ring and New Construction housing. Deep regressed cone reflectors optimize visual cut-off. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-28, NHIOICDCP-28) 1000lm / 14W (NHIOICD-28, NHIOICDCP-28) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot Required: Trimless Mud Plate (NIO-TLMR-2RA) Suction cup (NIO-TLSUCTION) available for removal from finished ceiling - [NIO-2RTLA](https://noralighting.com/product/nio-2rtla/) - 2" Trimless Iolite luminaires have no exposed trim flange and do not extend beyond the ceiling plane. Iolite Trimless requires a Trimless Mud Ring and New Construction housing. Regressed cone reflector optimizes visual cut-off and adjust up to 15°. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-28, NHIOICDCP-28) 1000lm / 14W (NHIOICD-28, NHIOICDCP-28) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot Required: Trimless Mud Plate (NIO-TLMR-2RA) - [NIOB-2RSL](https://noralighting.com/product/niob-2rsl/) - 2” Iolite luminaires can be specified for use with Iolite new construction or remodel housings. Adjustable slot aperture focus the beam spread through 1-3/4” x 1-3/8” opening. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-28, NHIOICDCP-28, NHRIOIC-28) 1000lm / 14W (NHIOICD-28, NHIOICDCP-28, NHRIOIC-28) 1500lm / 20W (NHIOICD-215, NHIOICDCP-215) 2000lm / 24W (NHIOICD-220, NHIOICDCP-220) 2500lm / 28W (NHIOICD-225, NHIOICDCP-225) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot - [NIOB-2RPHA](https://noralighting.com/product/niob-2rpha/) - 2” Iolite luminaires can be specified for use with Iolite new construction or remodel housings. Adjustable pinhole reflector focuses the beam spread through 1-1/2" opening and is available in a wide range of finishes. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-28, NHIOICDCP-28, NHRIOIC-28) 1000lm / 14W (NHIOICD-28, NHIOICDCP-28, NHRIOIC-28) 1500lm / 20W (NHIOICD-215, NHIOICDCP-215) 2000lm / 24W (NHIOICD-220, NHIOICDCP-220) 2500lm / 28W (NHIOICD-225, NHIOICDCP-225) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot - [NIOB-2RPH](https://noralighting.com/product/niob-2rph/) - 2” Iolite luminaires can be specified for use with Iolite new construction or remodel housings. Pinhole reflector focuses the beam spread through 1-9/16" opening and is available in a wide range of finishes. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-28, NHIOICDCP-28, NHRIOIC-28) 1000lm / 14W (NHIOICD-28, NHIOICDCP-28, NHRIOIC-28) 1500lm / 20W (NHIOICD-215, NHIOICDCP-215) 2000lm / 24W (NHIOICD-220, NHIOICDCP-220) 2500lm / 28W (NHIOICD-225, NHIOICDCP-225) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot - [NIOB-2SNDSQ](https://noralighting.com/product/niob-2sndsq/) - 2” Iolite luminaires can be specified for use with Iolite new construction or remodel housings. Deep regressed cone reflectors optimize visual cut-off. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-28, NHIOICDCP-28, NHRIOIC-28) 1000lm / 14W (NHIOICD-28, NHIOICDCP-28, NHRIOIC-28) 1500lm / 20W (NHIOICD-215, NHIOICDCP-215) 2000lm / 24W (NHIOICD-220, NHIOICDCP-220) 2500lm / 28W (NHIOICD-225, NHIOICDCP-225) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot - [NIOB-2SNDC](https://noralighting.com/product/niob-2sndc/) - 2” Iolite downlights can be specified for use with Iolite new construction or remodel housings. Deep regressed cone reflectors optimize visual cut-off. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-28, NHIOICDCP-28, NHRIOIC-28) 1000lm / 14W (NHIOICD-28, NHIOICDCP-28, NHRIOIC-28) 1500lm / 20W (NHIOICD-215, NHIOICDCP-215) 2000lm / 24W (NHIOICD-220, NHIOICDCP-220) 2500lm / 28W (NHIOICD-225, NHIOICDCP-225) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot - [NIOB-2RNDC](https://noralighting.com/product/niob-2rndc/) - 2” Iolite downlights can be specified for use with Iolite new construction or remodel housings. Deep regressed cone reflectors optimize visual cut-off. Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 800lm / 14W (NHIOICD-28, NHIOICDCP-28, NHRIOIC-28) 1000lm / 14W (NHIOICD-28, NHIOICDCP-28, NHRIOIC-28) 1500lm / 20W (NHIOICD-215, NHIOICDCP-215) 2000lm / 24W (NHIOICD-220, NHIOICDCP-220) 2500lm / 28W (NHIOICD-225, NHIOICDCP-225) Optics: Field Changeable (Spot, Narrow Flood, Flood) or 10° Narrow Spot ## Categories - [Lighting 101](https://noralighting.com/category/lighting-101/) ## Product categories - [Sapphire LED Series](https://noralighting.com/product-category/products/recessed/housing-trims/sapphire-led-series/) - A high efficiency commercial series featuring COB LED technology. Sizes includes 4″, 6″ & 8″ apertures delivering over 5500 lumens in 2700K, 3000K, 3500K or 4000K CCT options. Featuring deep cone open reflectors, adjustable, wall wash or decorative glasses reflectors. - [Products](https://noralighting.com/product-category/products/) - [Marquise LED Series](https://noralighting.com/product-category/products/recessed/housing-trims/marquise-led-series/) - Commercial and high-end residential ICAT series that utilizes the same two LED packages as the Sapphire Series. Available in 4″, 5″ & 6″ apertures up to 2500 lumen packages in 2700K, 3000K, 3500K or 4000K. Variety of adjustable reflectors, square, slope and baffles. Housings include new construction, remodel, slope or retrofit existing housings. - [Cobalt LED Series](https://noralighting.com/product-category/products/recessed/housing-trims/cobalt-led-series/) - Cobalt Series consist of retrofit and dedicated 4″, 5″ & 6″ reflectors providing up to 2000 lumens in 2700K, 3000K, 3500K, 4000K or Comfort Dim technology. Cobalt series features COB technology throughout the entire family, for a consistent appearance throughout. Series now includes a shallow 2-5/8″ housing, adjustable reflectors, adjustable elbow, high lumen and variety of retrofit reflectors. - [Iolite Small Aperture LED Series](https://noralighting.com/product-category/products/recessed/housing-trims/iolite-led-series/) - Small aperture LED specification downlights available in 1″, 2″ and 4″ apertures. Featuring COB LED technology with field adjustable beam spreads or 10° optic and a variety of square and round reflectors. Iolite Series produces up to 2500 lumens in 2700K, 3000K, 3500K, 4000K, 5000K or Comfort Dim technology. Also 2″ and 4″ apertures are available in trimless, for a clean knife edge look. Housings include new construction, remodel, can-less or retrofit existing housings. - [Onyx LED Retrofit Series](https://noralighting.com/product-category/products/recessed/retrofit/onyx-led-series/) - Onyx Retrofit LED Series features a variety of trim options with an economical quality solution to LED Retrofit downlighting. Deep-set optics produce visual comfort in 4″ and 5″/6″ apertures. The Onyx produces 90+ CRI for true vibrant color rendition. Producing up to 1200 lumens in Dedicated CCT or Selectable CCT options. - [Low Voltage](https://noralighting.com/product-category/products/recessed/housing-trims/low-voltage/) - [Track](https://noralighting.com/product-category/products/track/) - [Line Voltage](https://noralighting.com/product-category/products/recessed/housing-trims/line-voltage/) - [Exit & Emergency](https://noralighting.com/product-category/products/exit-emergency/) - [Exit Signs](https://noralighting.com/product-category/products/exit-emergency/exit-signs/) - [Exit & Emergency Combinations](https://noralighting.com/product-category/products/exit-emergency/exit-emergency-combo/) - [Emergency Lights](https://noralighting.com/product-category/products/exit-emergency/emergency-lights/) - [Accessories](https://noralighting.com/product-category/products/exit-emergency/accessories/) - [12V & 24V LED Drivers](https://noralighting.com/product-category/products/led-drivers/) - [12V Drivers](https://noralighting.com/product-category/products/led-drivers/12v-drivers/) - [24V Drivers](https://noralighting.com/product-category/products/led-drivers/24v-drivers/) - [Under Cabinet](https://noralighting.com/product-category/products/under-cabinet/) - [24V SILK LED Lightbar](https://noralighting.com/product-category/close-out/24v-led-lightbar/) - [120V LEDUR Under Cabinet](https://noralighting.com/product-category/products/under-cabinet/ledur-undercabinet/) - [120V Bravo FROST](https://noralighting.com/product-category/close-out/bravo-frost/) - [Josh LED Puck Light](https://noralighting.com/product-category/products/under-cabinet/josh-led-puck-light/) - [Pendants](https://noralighting.com/product-category/products/pendants/) - [Cylinder](https://noralighting.com/product-category/products/pendants/cylinder/) - [iLENE Mini Cylinder](https://noralighting.com/product-category/products/pendants/ilene-mini-cylinder/) - [RLM Shades](https://noralighting.com/product-category/products/pendants/rlm-shades/) - [Pendants](https://noralighting.com/product-category/close-out/pendants-closeout/) - [Track Packs](https://noralighting.com/product-category/products/track/track-packs/) - [Track Head Accessories](https://noralighting.com/product-category/products/track/track-head-accessories/) - [Multiples](https://noralighting.com/product-category/products/multiples/) - [Pull-Down LED Multiples](https://noralighting.com/product-category/products/multiples/pull-down-trimless-mls/) - [Trimless / Flanged MLS](https://noralighting.com/product-category/products/multiples/trimless-mls-multiples/) - [Trimless LED MLS](https://noralighting.com/product-category/products/multiples/trimless-mls-multiples/trimless-led-mls-trimless-mls-multiples/) - [Trimless Line Voltage MLS](https://noralighting.com/product-category/products/multiples/trimless-mls-multiples/trimless-line-voltage-mls-trimless-mls-multiples/) - [Flanged MLS](https://noralighting.com/product-category/products/multiples/flanged-mls/) - [Surface](https://noralighting.com/product-category/products/surface/) - [Opal](https://noralighting.com/product-category/products/surface/opal/) - The Opal Series luminaires are designed to surface mount over a standard or fire rated junction boxes, and is suitable for use with a 5″ or 6″ recessed housing by Nora or others. The Opal produces even illumination with no diode image, from bright to dim. The low profile unit is cULus wet listed and produces up to 2000 lumens at 90+ CRI. Opal Series is available in 4″, 6″ or 8″, three finishes and AC without any driver. - [SURF](https://noralighting.com/product-category/products/surface/surf/) - The SURF Series is a superior solution for minimalistic surface mounted lighting. The unique light guide and embedded honeycomb lens provides comfortable glare free lighting not found in other surface mounts. Sizes include 4″, 6″ and 7″ in round or square with sharp corners and regressed baffle, the SURF provides an architectural look for general lighting applications. Producing up to 1350 lumens in 2700K, 3000K, 3500K, 4000K or 5000K. - [Linear / Accent](https://noralighting.com/product-category/products/linear-accent-products/) - [Step Lights](https://noralighting.com/product-category/products/step-lights/) - [Brick LED Step Lights](https://noralighting.com/product-category/products/step-lights/brick-led-step-lights/) - [Mini LED Step Lights](https://noralighting.com/product-category/products/step-lights/mini-led-step-lights/) - [LED Step Lights](https://noralighting.com/product-category/products/step-lights/led-step-lights-led-step-light/) - [Tape Light](https://noralighting.com/product-category/products/tape-light/) - [24V CCT Color Tuning Tape Light](https://noralighting.com/product-category/products/tape-light/24v-cct-color-tuning-tape-light/) - [Continuous High Output - 450lm/ft](https://noralighting.com/product-category/products/tape-light/continuous-high-output-tape/) - [Continuous Hy-Brite - 375lm/ft.](https://noralighting.com/product-category/products/tape-light/continuous-hy-brite-tape/) - [Continuous Standard - 80lm/ft.](https://noralighting.com/product-category/products/tape-light/continuous-standard-tape/) - [24V Side-Lit Tape - 70lm/ft.](https://noralighting.com/product-category/products/tape-light/24v-side-lit-tape-light/) - [24V Hy-Brite Tape - 375lm/ft.](https://noralighting.com/product-category/products/tape-light/24v-hy-brite-tape-light/) - [24V High Output - 450lm/ft.](https://noralighting.com/product-category/products/tape-light/24v-high-output-tape-light/) - [Cylinders](https://noralighting.com/product-category/products/cylinders/) - [Sloped Ceiling](https://noralighting.com/product-category/products/recessed/housing-trims/sloped-ceiling/) - [Recessed Accessories](https://noralighting.com/product-category/products/recessed/recessed-accessories/) - [Decorative Glasses](https://noralighting.com/product-category/products/recessed/recessed-accessories/decorative-glasses/) - [Dipper](https://noralighting.com/product-category/products/surface/dipper/) - Dipper LED Series is available in Surface or Track Mounted. Available in two lengths (8″ or 12″) and three finishes (black, silver or white). Surface mount is non-adjustable and delivers up to 2300 lumens in 3000K, 3500K or 4000K. - [Economy](https://noralighting.com/product-category/products/recessed/housing-trims/line-voltage/economy-line-voltage/) - [6" Housings & Trims](https://noralighting.com/product-category/products/recessed/housing-trims/line-voltage/economy-line-voltage/6-housings-trims/) - [5" Housings & Trims](https://noralighting.com/product-category/products/recessed/housing-trims/line-voltage/economy-line-voltage/5-housings-trims/) - [4" R/PAR20 Housings & Trims](https://noralighting.com/product-category/products/recessed/housing-trims/line-voltage/economy-line-voltage/4-par-housings-trims/) - [GU10 MR16](https://noralighting.com/product-category/products/recessed/housing-trims/line-voltage/gu10-mr16-line-voltage/) - [Sloped Ceiling](https://noralighting.com/product-category/products/recessed/housing-trims/line-voltage/sloped-ceiling-line-voltage/) - [* CLOSE OUT *](https://noralighting.com/product-category/close-out/) - Close out items are discounted, contact your local representative for pricing - [GU24 Base](https://noralighting.com/product-category/products/recessed/housing-trims/gu24-base/) - [Track Heads](https://noralighting.com/product-category/products/track/track-heads/) - [Retrofit](https://noralighting.com/product-category/products/recessed/retrofit/) - [Cobalt LED Retrofit Series](https://noralighting.com/product-category/products/recessed/retrofit/cobalt-led-retrofit/) - Cobalt LED retrofit downlights are specification grade 4″, 5″ and 6″ luminaires available with a variety of dimming (Triac, ELV or 0-10V) and emergency options. Trim options range from adjustable, elbow, reflector, baffle or square. - [Low Voltage Retrofit](https://noralighting.com/product-category/products/recessed/retrofit/low-voltage-retrofit-kits/) - [MR16 GU10 Retrofit](https://noralighting.com/product-category/products/recessed/retrofit/gu10-mr16/) - [Commercial Indoor](https://noralighting.com/product-category/products/commercial-indoor/) - [Panels](https://noralighting.com/product-category/products/commercial-indoor/panels/) - LED Panels deliver more lumens and uniformity to illuminate spaces without glare. Panels can be utilized in offices, conference rooms, libraries and other task areas where general illumination is desired. The fixtures accept universal 120-347V input with a range of wattages, lumens and color temperatures. Luminaire sizes are available: 2’ x 2’, 1′ x 4′ and 2’ x 4’, which can be installed in most grid ceilings. Optional mounting accessories include surface mount, recessed mount or pendant mount. - [One Circuit Track & Accessories](https://noralighting.com/product-category/products/track/one-circuit-track-accessories/) - [Two-Circuit Track & Accessories](https://noralighting.com/product-category/products/track/two-circuit-track-accessories/) - [Track Retrofit](https://noralighting.com/product-category/products/recessed/retrofit/track-retrofit/) - [Dedicated LED Housings](https://noralighting.com/product-category/products/recessed/housing-trims/dedicated-led-housings/) - [L-Line LED Direct](https://noralighting.com/product-category/products/commercial-indoor/l-line-direct/) - L-Line series offers a clean and modern appearance with a sleek extruded aluminum housing. Symmetrical light distribution will evenly illuminate surfaces with a diffused lens, making the L-Line ideal for commercial, retail, healthcare and education applications. Available in surface or pendant mounting options. Series can be connected with seamless luminous L, X or T connectors. - [24V Comfort Dim - 170lm/ft.](https://noralighting.com/product-category/products/tape-light/24v-comfort-dim-tape-light/) - [Fire Rated](https://noralighting.com/product-category/products/recessed/fire-rated/) - [Step Lights](https://noralighting.com/product-category/close-out/step-lights-close-out/) - [FLIN LED Series](https://noralighting.com/product-category/products/recessed/canless-recessed/flin-led-series/) - Quick, economical recessed ICAT LED lighting for remodel or new construction applications. FLIN requires less than 2″ ceiling clearance and no housing is required! Sizes include 4″, 6″ or 8″ in round or square with a regressed lens and sharp baffle for reduced aperture brightness. Series produces up to 2350 lumens at 90+ CRI in 2700K, 3000K, 3500K, 4000K or 5000K temperatures. - [Exit & Emergency](https://noralighting.com/product-category/close-out/exitemergency/) - [Track Heads](https://noralighting.com/product-category/close-out/track-close-out/) - [Surface Mount](https://noralighting.com/product-category/close-out/surface-mount/) - [Cylinders](https://noralighting.com/product-category/products/surface/cylinders-surface/) - [M2 2" LED Recessed](https://noralighting.com/product-category/products/recessed/canless-recessed/m2-2in-led-recessed/) - M2 recessed downlights do not require any housings, which makes installation easy. Simply cut the ceiling, wire the junction box and insert the luminaire in the ceiling cavity. IC rated luminaires are available in downlight or adjustable gimbal trims in round or square. Delivering up to 850 lumens in 2700K or 3000K at 90+ CRI. - [Recessed](https://noralighting.com/product-category/products/recessed/) - [120V NULS-LED](https://noralighting.com/product-category/products/under-cabinet/120v-nuls-led/) - [Iolite LED MLS](https://noralighting.com/product-category/products/multiples/iolite-mls/) - [M1 1" LED Recessed](https://noralighting.com/product-category/products/recessed/canless-recessed/m1-1in-led-recessed/) - M1 miniature IC rated recessed series features quality and convenience with easy installation for indoor & outdoor applications. Luminaires include four plastic downlight trims, three optics and 6″ quick connect. Series is available in four color temperatures (2700K, 3000K, 3500K or 4000K) and requires a 12VDC driver. - [Quartz LED Series](https://noralighting.com/product-category/products/recessed/canless-recessed/quartz-led-series/) - Architectural and Commercial grade LED high lumen downlight. Each luminaire includes two tunable switches; Selectable Lumens allows the end user to determine the wattage input & Selectable CCT allows for changing the color temperature appearance. Producing up to 3300lm in 3000K, 3500K or 4000K in 4″, 6″ or 8″ apertures. - [ELO](https://noralighting.com/product-category/products/surface/elo/) - ELO LED Surface Mount Series delivers up to 2200 lumens in 4″, 6″, 8″, 11″ or 16″ round luminaires that are designed to surface mount over a standard junction box or suitable for use with a recessed housing by Nora or others. 16″ ELO can be suspended with accessories. - [120V Bravo FROST TW](https://noralighting.com/product-category/products/under-cabinet/120v-bravo-frost-tw/) - [Ari LED Step Lights](https://noralighting.com/product-category/products/step-lights/ari-led-step-lights/) - [iPOINT](https://noralighting.com/product-category/products/surface/ipoint/) - The iPOINT LED monopoint is the newest addition to the Iolite family. iPOINT luminaires require an Iolite housing, allowing the fixture to maintain a minimal canopy and sleek appearance. iPOINT fixtures produce from 750 to 1200 lumens at 90+ CRI with a choice of three kelvin temperatures from 2700K, 3000K or 4000K. Similar to Iolite reflectors, each iPOINT includes spot, narrow flood and flood optics which can be easily changed in the field. iPOINT is available in Cylinder or Cone styles in black or matte powder white. iPOINT luminaires can be dimmed with Triac, ELV, 0-10V or Lutron Hi-lume EcoSystem. - [Monopoint](https://noralighting.com/product-category/products/monopoint/) - [Pearl LED Retrofit Series](https://noralighting.com/product-category/products/recessed/retrofit/pearl-led-series/) - 4″, 5″ & 6″ LED Retrofit downlights featuring Cree COB technology with field adjustable beam spreads and a variety of square and round reflectors. Pearl Series delivers over 1200 lumens in 2700K, 3000K, 3500K, 4000K or 750lm with Comfort Dim technology. Certain luminaires are compatible with shallow housings and adjustable up to 35° with NSIC-4LMRAT. - [LED Housings & Trims](https://noralighting.com/product-category/products/multiples/flanged-mls/led-housings-trims/) - [Line Voltage Housings & Trims](https://noralighting.com/product-category/products/multiples/flanged-mls/line-voltage-housings-trims/) - [M2 LED Multiples](https://noralighting.com/product-category/products/multiples/m2-led-multiples/) - [120V Tape Light - 330lm/ft.](https://noralighting.com/product-category/products/tape-light/120v-tape-light/) - [Theia LED Series](https://noralighting.com/product-category/products/recessed/canless-recessed/theia-led-series/) - Theia recessed downlights do not require any housings, which makes installation easy. Simply cut the ceiling, wire the junction box and insert the luminaire in the ceiling cavity. IC air-tight luminaires include selectable CCT switch and are available in 4″, 6″ and 8″ apertures. Delivering up to 2100 lumens in 2700K/3000K/3500K/4000K/5000K - [M4 4" LED Recessed](https://noralighting.com/product-category/products/recessed/canless-recessed/m4-led-series/) - M4 recessed downlights do not require any housings, which makes installation easy. Simply cut the ceiling, wire the junction box and insert the luminaire in the ceiling cavity. IC rated luminaires are available in downlight, adjustable gimbal or adjustable elbow trims in round or square. Delivering up to 1100 lumens in 2700K or 3000K at 90+ CRI. - [L-Line LED Indirect / Direct](https://noralighting.com/product-category/products/commercial-indoor/l-line-indirect-direct/) - L-Line Indirect/Direct luminaires include three integral switches for direction of light and selectable color temperature per direction. Sleek extruded housing with symmetrical light distribution will evenly illuminate surfaces with a diffused lens. Pendant or wall mounted fixtures are ideal for commercial, retail, healthcare and education applications. - [Strip Light](https://noralighting.com/product-category/products/commercial-indoor/strip-light/) - Industrial LED Tunable Strip Light includes an integral CCT switch to change the color temperature at any time! Ideal for commercial, residential, industrial and retail applications. The luminaire’s lens is designed to evenly spread the light in a complete 120° beam pattern. The smooth lens makes for easy maintenance and no diode image. NLSTR can be used in storage or utility buildings, coves, display cases, workshops and garages for task and general lighting. - [Recessed Retrofit](https://noralighting.com/product-category/close-out/retrofit-close-out/) - [Can-less Recessed](https://noralighting.com/product-category/close-out/canless-recessed-close-out/) - [L-Line LED Recessed](https://noralighting.com/product-category/products/commercial-indoor/l-line-recessed/) - L-Line series offers a clean and modern appearance with a sleek extruded aluminum housing. Symmetrical light distribution will evenly illuminate surfaces with a diffused lens, making the L-Line ideal for commercial, retail, healthcare and education applications. - [L-Line LED Wall Mount](https://noralighting.com/product-category/products/commercial-indoor/l-line-wall-mount/) - L-Line series offers a clean and modern appearance with a sleek extruded aluminum housing. Symmetrical light distribution will evenly illuminate surfaces with a diffused lens, making the L-Line ideal for commercial, retail, healthcare and education applications. - [wELO](https://noralighting.com/product-category/products/surface/welo/) - wELO LED Surface Mount luminaires are wet location rated and deliver up to 1588 lumens. Available in two round sizes (8″ or 11″) in dedicated color temperatures (2700K, 3000K, 3500K or 4000K) and are designed to surface mount over a standard junction box. - [Can-less Recessed](https://noralighting.com/product-category/products/recessed/canless-recessed/) - Standard recessed downlights require a housing. Can-less downlights include a pre-wired junction box. No housing is required! Sizes range from 1″ to 8″ and delivering up to 2100 lumens. - [M-Wave Adjustable LED Recessed](https://noralighting.com/product-category/products/recessed/canless-recessed/m-wave/) - M-Wave can-less adjustable luminaires offer the most versatility for aiming without any housing needed! IC Air-Tight rated luminaires extend up to 90° from surface and rotate 350°, illuminating any direction needed. - [24V COB Tape - 210lm or 450lm/ft.](https://noralighting.com/product-category/products/tape-light/24v-cob-tape-light/) - [Housing & Trims](https://noralighting.com/product-category/products/recessed/housing-trims/) - Standard recessed downlights with a housing and trim. Sizes range from 1″ to 8″ and available in LED dedicated, low voltage and medium base (line voltage). - [Iolite Can-less LED Series](https://noralighting.com/product-category/products/recessed/canless-recessed/iolite-canless-series/) - Small aperture LED specification downlights available in 1″, 2″ and 4″ apertures. Featuring COB LED technology with field adjustable beam spreads and a variety of square and round trims. Iolite Can-less Series produces up to 1250 lumens in 2700K, 3000K, 3500K, 4000K or Comfort Dim technology. - [Marquise LED Retrofit Series](https://noralighting.com/product-category/products/recessed/retrofit/marquise-led-retrofit/) - Marquise LED retrofit downlights are specification grade 4″, 5″ and 6″ luminaires with Cree COB LED technology. Specifiable beam spreads range from spot, narrow flood and flood options. - [Sapphire LED Retrofit Series](https://noralighting.com/product-category/products/recessed/retrofit/sapphire-led-retrofit/) - Sapphire LED retrofit downlights are architectural grade 6″ and 8″ luminaires with Cree COB LED technology. Specifiable beam spreads range from spot, narrow flood and flood options. - [Iolite LED Retrofit Series](https://noralighting.com/product-category/products/recessed/retrofit/iolite-retrofit/) - 4″ Iolite LED Retrofit Series are specification grade downlights with field changeable optics. Round or square trims options include bullnose, adjustable and gimbal. - [Sloped Ceiling Retrofit](https://noralighting.com/product-category/products/recessed/retrofit/sloped-ceiling-retrofit/) - 6″ Retrofit downlights for sloped and super sloped housings. Accommodates ceiling pitches from 1/12 to 12/12. Trim options include reflector or baffle in black or white finish. - [Slim](https://noralighting.com/product-category/products/surface/slim/) - Slim luminaires are an ultra slim LED surface mount designed to surface mount over an octagonal junction boxes, and is suitable for use with a 4″ recessed housings by Nora or others. The Slim produces even illumination with no diode image, from bright to dim. Each fixture includes a selectable CCT switch to change from 27K / 30K / 35K / 40K / 50K - [M-Curve Adjustable LED Recessed](https://noralighting.com/product-category/products/recessed/canless-recessed/m-curve/) - M-Curve can-less adjustable luminaires offer the most versatility for aiming without any housing needed! IC Air-Tight rated luminaires extend up to 80° from surface and rotate 360°, illuminating any direction needed. - [FLAT LED Series](https://noralighting.com/product-category/products/recessed/canless-recessed/flat-led-series/) - FLAT wafer can-less LED downlights feature a non-metallic trim for corrosive environments. Can-less downlights are easy to install in new construction or remodel applications. Each luminaire includes an integral selectable CCT switch located on the junction box with a quick connect that allows for easy disconnect and mounting in the ceiling. - [Troffers](https://noralighting.com/product-category/products/commercial-indoor/troffers/) - LED Troffers are the perfect kind of indoor lighting to spike the moods of, well, anyone in offices, schools, retail, and hospitals. - [Wraparound](https://noralighting.com/product-category/products/commercial-indoor/wraparound/) - Industrial LED Wraparound fixtures with a clean white finish and selectable lumen output and color temperature, making it an energy-efficient lighting solution for commercial, industrial, and residential spaces. It features two integral switches that let you choose between multiple lumen levels (up to 8000lm) and color temperatures (3000K / 3500K / 4000K) to suit your application. Designed for surface, wall, or suspended mounting, this LED wraparound replaces outdated fluorescents with uniform, soft light distribution while offering 0-10V dimming capability and optional emergency or motion sensor accessories. - [120V LED Lightbar](https://noralighting.com/product-category/products/under-cabinet/lightbar/) - Available in four different lengths (6″, 12″, 24″ and 48″). Connect together up to 40′ max. length. Delivering 200 lumens per foot at dedicated 3000K. - [Frame Light](https://noralighting.com/product-category/products/commercial-indoor/frame-light/) - LED Frame lights are a perimeter fixture for T-Bar ceiling grids. A remote driver is included with two Selectable Switches to change the color temperature and brightness. Universal input (120-277VAC) and dimmable with compatible 0-10V dimmers. No cutting is required and ceiling tile sits inside the frame light. Delivering more lumens than a standard backlit panel and uniformity to illuminate spaces without glare. Frame lights can be utilized in offices, conference rooms, libraries and other task areas where general illumination is desired. - [24V RGBW COB Tape - 300lm/ft.](https://noralighting.com/product-category/products/tape-light/24v-rgbw-cob-tape/) - [Contractor Series](https://noralighting.com/product-category/contractor-series/) - [L-Line LED Indirect / Direct](https://noralighting.com/product-category/products/linear-accent-products/l-line-indirect-direct-linear/) - L-Line Indirect/Direct luminaires include three integral switches for direction of light and selectable color temperature per direction. Sleek extruded housing with symmetrical light distribution will evenly illuminate surfaces with a diffused lens. Pendant or wall mounted fixtures are ideal for commercial, retail, healthcare and education applications. - [L-Line LED Direct](https://noralighting.com/product-category/products/linear-accent-products/l-line-direct-linear/) - L-Line series offers a clean and modern appearance with a sleek extruded aluminum housing. Symmetrical light distribution will evenly illuminate surfaces with a diffused lens, making the L-Line ideal for commercial, retail, healthcare and education applications. Available in surface or pendant mounting options. Series can be connected with seamless luminous L, X or T connectors. - [L-Line LED Recessed](https://noralighting.com/product-category/products/linear-accent-products/l-line-recessed-linear/) - L-Line series offers a clean and modern appearance with a sleek extruded aluminum housing. Symmetrical light distribution will evenly illuminate surfaces with a diffused lens, making the L-Line ideal for commercial, retail, healthcare and education applications. - [L-Line LED Wall Mount](https://noralighting.com/product-category/products/linear-accent-products/l-line-wall-mount-linear/) - L-Line series offers a clean and modern appearance with a sleek extruded aluminum housing. Symmetrical light distribution will evenly illuminate surfaces with a diffused lens, making the L-Line ideal for commercial, retail, healthcare and education applications. - [Strip Light](https://noralighting.com/product-category/products/linear-accent-products/strip-light-linear/) - [Wraparound](https://noralighting.com/product-category/products/linear-accent-products/wraparound-linear/) - [Apollo](https://noralighting.com/product-category/products/recessed/housing-trims/apollo/) - A sleek, three-inch recessed lighting solution that combines cutting-edge COB LED technology with architectural-grade finishes and advanced TIR optics. Available in flanged and trimless options, Apollo is ideal for millwork applications, offering exceptional glare control and a range of versatile dimming protocols. Whether you’re illuminating residential or commercial spaces, Apollo ensures a seamless blend of style and performance, with a focus on precision and efficiency. - [Quartz LED Series](https://noralighting.com/product-category/products/recessed/retrofit/quartz-series/) - Architectural and Commercial grade LED high lumen downlight. Each luminaire includes two tunable switches; Selectable Lumens allows the end user to determine the wattage input & Selectable CCT allows for changing the color temperature appearance. Producing up to 3300lm in 3000K, 3500K or 4000K in 4″, 6″ or 8″ apertures. - [Fire Rated Can-less](https://noralighting.com/product-category/products/recessed/canless-recessed/fire-rated-canless/) - Fire rated can-less downlights are tested and listed to UL 263, ASTM E119 & CAN/ULC S101 two-hour fire rating. Wafer design allows luminaires to be installed in shallow plenums and include a selectable five color temperature switch. Multi-piece construction provides an extra layer of protection to prevent the spread of fire above the ceiling within a two-hour rating. - [120V LEDUR Under Cabinet](https://noralighting.com/product-category/close-out/closeout-ledur/) - [120V LEDUR Adjustable Under Cabinet](https://noralighting.com/product-category/products/under-cabinet/ledur-adjustable/) - [Panels](https://noralighting.com/product-category/close-out/panels-close-out/) - [Turtle-Friendly Step Lights](https://noralighting.com/product-category/products/step-lights/turtle-step-lights/)