NSEM-6WD

Enclosure with Emergency Driver for 6" ELO & ELO+

A surface mount enclosure with an emergency LED driver for use with 6″ ELO and ELO+ luminaires. It adds 1-1/2″ height to the luminaire and matches the finish. Driver’s circuitry automatically switches the luminaire between emergency and normal power operation during power loss and restoration. Operates at a reduced level for a minimum of 90 minutes to allow safe egress during power outage. Upon restoration to normal AC operation, the emergency driver returns to charging mode.

FEATURES

  • Compatible with 6″ ELO & ELO+
  • Matching decorative enclosure also available
  • Listed for field installation – UL 924 and CSA C2.22 No 141
  • Includes integral test switch

ELECTRICAL
Input Voltage: 120VAC, 50/60Hz
Output Voltage: 123/131VDC
Wattage: 3W
Illumination Time: 90 minutes

OPERATION
When AC power fails, the driver immediately switches to the emergency mode, operating the LEDs at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the emergency driver automatically returns to the charging mode.

BATTERY
Ternary lithium-ion battery requires 24 hours to recharge.

COMPATIBLE LUMINAIRES
NELOCAC-6RL130W: 6″ ELO, 1080lm / 15W, 80+ CRI
NELOCAC-6RP: 6″ ELO+, 700lm / 12W, 90+ CRI

MATCHING DECORATIVE ENCLOSURE
NSEM-6ND: Decorative Enclosure without Emergency Driver

Category:

Downloads

• Specification Sheet

• Instruction Sheet

Additional information

Family

Aperture Size

Mounting Type

Options