NL-601

Nora Lighting’s series of 6″ low voltage housings provides crisp, defined quartz halogen illumination from MR16, AR111 or PAR36 light sources to any application. A wide variety of attractive adjustable trims allows fine-tuned aiming of directional light sources. Also available as remodel.

Transformer:
Input: Available in 120V or 277V
Type: Available in Electronic or Magnetic
Output: Available in 12V 50W or 12V 75W

Minimum Clearances: Non-IC housings require a minimum clearance of 3″ from thermal insulation and 1/2″ from adjacent building components

Ceiling Thickness: Ceiling thickness varies from 5/8″ – 1-3/8″

Lamp Adjustment: Circular bracket on low voltage trims provides a secure snap-in hold and friction-locked aiming adjustment.

UV/Shatter Guard Shield: All low voltage trims include a tempered UV/shatter shield.

Bar Hangers: Bar hangers are adjustable from 13-5/8″ to 24-1/2″ and can be repositioned 90 degrees. Bar hangers are slotted for T-bar installation and include captive nails.

Junction Box: Junction box is listed for through branch circuit wiring and contains seven 1/2″ knockouts and four Romex® pryouts with strain relief

Dimming: Use magnetic low voltage dimming control with magnetic transformer or electronic low voltage dimming control with electronic transformer

Electrical: Quick Connector provided

Wattage: 20W-75W (actual wattage varies with trim)

Lamp: 12V MR16 / AR111 / PAR36

Dimensions:
Length: 12-1/2″
Width: 7-1/2″
Depth: 7-1/2″
Ceiling Opening: 6-3/8″

Listings:
cULus Damp Location w/ Feed Through
cULus Wet Location (Only with designated trims)