3" Air-Tight Low Voltage Remodel Housing

3″ Low voltage remodel housing for installation into existing sheet rock ceilings where access is only available from below the ceiling. For use in non-insulated ceilings, where insulation can be kept 3″ from fixtures.

Minimum Clearances: Non-IC housings require a minimum clearance of 3” from thermal insulation and 1/2″ from adjacent building components.

Mounting: Four high tension tempered steel springs secure remodel housing to ceiling.

Socket: Bi-Pin GU5.3 socket with heat shield

Maximum Wattage: 50W (can be labeled for lower wattages – consult factory)




• Specification Sheet

• Instruction Sheet

Additional information

Light Source

Low Voltage

Construction Type

Remodel, Non-IC

Aperture Size