6" Low Voltage Remodel Housing
6″ low voltage housings provides crisp, defined quartz halogen illumination from MR16, AR111 or PAR36 light sources to any application. A wide variety of attractive adjustable trims allows fine-tuned aiming of directional light sources. Housings also available as new construction.
Input: Available in 120V or 277V
Type: Available in Electronic or Magnetic
Output: Available in 12V 50W or 12V 75W
Minimum Clearances: Non-IC housings require a minimum clearance of 3″ from thermal insulation and 1/2″ from adjacent building components
Ceiling Thickness: Ceiling thickness varies from 5/8″ – 1-3/8″
Lamp Adjustment: Circular bracket on low voltage trims provides a secure snap-in hold and friction-locked aiming adjustment.
UV/Shatter Guard Shield: All low voltage trims include a tempered UV/shatter shield.
Installation: High tension tempered steel springs secure remodel housings evenly to ceiling; hole cutout template provided for convenience.
Junction Box: Junction box is listed for through branch circuit wiring and contains six 1/2″ knockouts and four Romex® pryouts with strain relief
Dimming: Use magnetic low voltage dimming control with magnetic transformer or electronic low voltage dimming control with electronic transformer
Electrical: Quick Connector provided
Wattage: 20W-75W (actual wattage varies with trim)
Lamp: 12V MR16 / AR111 / PAR36
Ceiling Opening: 6-3/8″
cULus Damp Location w/ Feed Through
cULus Wet Location (Only with designated trims)
NLR-604Q – 120V/12V 50W Magnetic Transformer
NLR-604/75Q – 120V/12V 75W Magnetic Transformer
NLR-604/277Q – 277V/12V 50W Magnetic Transformer
NLR-604/277/75Q – 277V/12V 75W Magnetic Transformer
NLR-604/1EL – 120V/12V 50W Electronic Transformer
NLR-604/75/1EL – 120V/12V 75W Electronic Transformer
NLR-604/2EL – 277V/12V 50W Electronic Transformer
NLR-604/75/2EL – 277V/12V 75W Electronic Transformer