NUTPCOB-RGBW

24V RGBW COB LED Tape creates a uniform seamless line of light without additional diffused covers or accessories. Producing over 450 lumens per foot in dedicated color temperatures, tape light is a perfect solution for low clearance or reflective surfaces to eliminate all glare or dotting.

Features
· 24V system – requires Controller/Decoder & Class 2 LED driver
· Seamless COB eliminates LED dotting
· Field cuttable every 1.31″ and connectable with accessories
· Roll includes: Tape light, 12″ power feed, mounting clips and screws
· Easy to install with pre-applied adhesive tape or clips
· cULus Listed for indoor dry locations (IP20 rated)

Length: 16.4′

Input Voltage: 24V

Lumens / Wattage: 300lm / 5.5W per foot

Dimming: Dimmable with RGBW controller or DMX decoder

Primary Colors: Red, Green, Blue and White (3000K)

Color Rendering Index: 90+ CRI

Controller or Decoder:
NARGBW-975: RGBW RF Controller
NARGBW-977: Hand Held Remote for NARGBW-975
NATL-DMX-4C/RGBW: DMX Decoder

Accessories:
NATLCB-508: 12″ Hardwire Power Cord
NATLCB-507: End-to-End Connector
NATLCB-503: 3″ Linking Cable
NATLCB-706: 6″ Linking Cable
NATLCB-718: 18″ Linking Cable
NATLCB-736: 36″ Linking Cable
NATLCB-772: 72″ Linking Cable
NATLCB-L: L Connector
NATLCB-T: T Connector
NATLCB-X: X Connector

Channels:
NATL-C23: 4′ Shallow Recessed Channel
NATL-C24: 4′ Shallow Channel
NATL-C25: 4′ Deep Recessed Channel
NATL-C26: 4′ Deep Channel
NATL-C27: 4′ J-Style Channel
NATLCB-509: Clear Mounting Clips

24V Drivers:
NATL-524W: 120V/24V 24W Plug-In Driver
NATL-545W: 120V/24V 45W Plug-In Driver
NATL-596W: 120V/24V 96W Plug-In Driver
NATL-5100HW: 110-240V/24V 81.6W Hardwire Driver
NPSU-60W/24: 110-277V/24V 60W Driver
NPSU-96W/24: 110-277V/24V96W Driver
NPSU-3X96W/24: 110-277V/24V 3x96W Driver
NATLED-5040HW: 120V/24V 40W Driver
NMT-48/24C2D1: 120V/24V 48W Driver
NMT-303/24C2D1: 120V/24V 3x100W Driver
NMT-303/24C2D2: 277V/24V 3x100W Driver
NMTD-60/24D: 120-277V/24V 60W Driver with Regulator
NMTD-96/24D: 120-277V/24V 96W Driver with Regulator